aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-highbank/highbank.c
AgeCommit message (Collapse)Author
2013-01-07ARM: highbank: fix typos with hignbank in power request functionsRob Herring
s/hignbank/highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-07ARM: highbank: use common debug_ll_io_initRob Herring
Remove the platform static mapping code for uart and use the common debug_ll_io_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-10-31ARM: highbank: Add initial ECX-2000 supportRob Herring
And initial Calxeda ECX-2000 SOC support. This adds Cortex-A15 peripherals and machine DT match name. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-31ARM: highbank: abstract out SCU usageRob Herring
In preparation for A15 support on ECX-2000, the direct calls to SCU registers must be conditional. The SCU power mode register is replaced by a custom register on ECX-2000. Rather than read the number of cores from the SCU, just hardcode it to 4. This removes one use of SCU and removes the need for the SCU to be statically mapped. The cpu initialization will ultimately come from DT. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-02Merge branch 'for-v3.7' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping updates from Marek Szyprowski: "This time the pull request is rather small, because the further redesign patches were not ready on time. This pull request consists of the patches which extend ARM DMA-mapping subsystem with support for CPU coherent (ACP) DMA busses. The first client of the new version is HighBank SATA driver. The second part of the pull request includes various cleanup for both CMA common code and ARM DMA-mapping subsystem." Fix up trivial add-add conflict due to the "dma-coherent" DT property being added next to the "calxeda,port-phys" property for the Calxeda AHCI controller. * 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page ARM: highbank: add coherent DMA setup ARM: kill off arch_is_coherent ARM: add coherent iommu dma ops ARM: add coherent dma ops ARM: dma-mapping: Refrain noisy console message ARM: dma-mapping: Small logical clean up drivers: dma-contiguous: refactor dma_alloc_from_contiguous()
2012-10-02ARM: highbank: add coherent DMA setupRob Herring
Some highbank DMA masters can support coherent (ACP) or non-coherent DMA. This sets up dma_map_ops for masters which are configured for coherent DMA. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-09-22Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson
* multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20ARM: highbank: call highbank_pm_init from .init_machineRob Herring
Being a module_init call, highbank_pm_init will cause problem with multi-platform build running on other platforms. Call it from .init_machine instead. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-14ARM: SoC: convert highbank to SMP operationsMarc Zyngier
Convert the highbank platform to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-11clk: add highbank clock supportRob Herring
This adds real clock support to Calxeda Highbank SOC using the common clock infrastructure. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [mturquette@linaro.org: fixed up invalid writes to const struct member] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-06-07ARM: highbank: Add smc calls to enable/disable the L2Rob Herring
Linux runs in non-secure mode on highbank, so we need secure monitor calls to enable and disable the PL310. Rather than invent new smc calls, the same calling convention used by OMAP is used here. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-29Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
2012-03-27Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: SoC specific updates" from Arnd Bergmann: "These changes are all specific to an soc family or the code for one soc. Lots of work for Tegra3 this time, but also a lot of other platforms. There will be another (smaller) set of soc patches later in the merge window for stuff that has dependencies on external trees or that was sent just before the merge window opened. The asoc tree added a few devices to the i.mx platform, which conflict with other devices added in the same place here. The tegra Makefile conflicts between a number of branches, mostly because of changes regarding localtimer.c, which was removed in the end. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up some trivial conflicts, including the mentioned Tegra Makefile. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: EXYNOS: fix cycle count for periodic mode of clock event timers ARM: EXYNOS: add support JPEG ARM: EXYNOS: Add DMC1, allow PPMU access for DMC ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata() ARM: SAMSUNG: Add __init attribute to samsung_bl_set() ARM: S5PV210: Add usb otg phy control ARM: S3C64XX: Add usb otg phy control ARM: EXYNOS: Enable l2 configuration through device tree ARM: EXYNOS: remove useless code to save/restore L2 ARM: EXYNOS: save L2 settings during bootup ARM: S5P: add L2 early resume code ARM: EXYNOS: Add support AFTR mode on EXYNOS4210 ARM: mx35: Setup the AIPS registers ARM: mx5: Use common function for configuring AIPS ARM: mx3: Setup AIPS registers ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE ARM: imx: update imx_v6_v7_defconfig ARM: tegra: Demote EMC clock inconsistency BUG to WARN ...
2012-03-13ARM: highbank: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the highbank platforms, and remove the old compile-time support. The highbank DTS file is updated to match the TWD DT documentation and fixes the timer trigger (rising edge). Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-09ARM: highbank: enable sp804 based sched_clockRob Herring
Initialize sched_clock to use the sp804 timer. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-01-30ARM: highbank: select SPARSE_IRQ and remove irqs.hRob Herring
irqs.h is optional now for SPARSE_IRQ, so select it and remove mach/irqs.h from highbank. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-16Merge branch 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into fixes * 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux: ARM: make BSYM macro assembly only ARM: highbank: remove incorrect BSYM usage ARM: imx: remove incorrect BSYM usage ARM: exynos: remove incorrect BSYM usage ARM: ux500: add missing ENDPROC to headsmp.S ARM: msm: Add missing ENDPROC to headsmp.S ARM: versatile: Add missing ENDPROC to headsmp.S
2012-01-16ARM: highbank: remove incorrect BSYM usageRob Herring
BSYM macro is only needed for assembly files and its usage in c files is wrong, so remove it. The linker will correctly set bit 0 for Thumb2 kernels. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dave Martin <dave.martin@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: highbank: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-05Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-11-16ARM: highbank: convert logical CPU numbers to physical numbersWill Deacon
This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when releasing CPUs during the SMP boot and CPU hotplug paths. Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-15ARM: highbank: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier
Convert the highbank platform to be using the gic_handle_irq function as its primary interrupt handler. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-31ARM: add Highbank core platform supportRob Herring
This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>