aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-mmp
AgeCommit message (Collapse)Author
2022-02-25ARM: mmp: Fix failure to remove sram deviceUwe Kleine-König
Make sure in .probe() to set driver data before the function is left to make it possible in .remove() to undo the actions done. This fixes a potential memory leak and stops returning an error code in .remove() that is ignored by the driver core anyhow. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-01Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and ↵Stephen Boyd
'clk-silabs' into clk-next - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series
2020-05-27clk: mmp2: Add support for power islandsLubomir Rintel
Apart from the clocks and resets, the PMU hardware also controls power to peripherals that are on separate power islands. On MMP2, that's the GC860 GPU and the SSPA audio interface, while on MMP3 also the camera interface is on a separate island, along with the pair of GC2000 and GC300 GPUs and the SSPA. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-12-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-15ARM: mmp: Drop unneeded select of COMMON_CLKGeert Uytterhoeven
Support for Marvell MMP ARMv5 platforms depends on ARCH_MULTI_V5, and thus on ARCH_MULTIPLATFORM. As the latter selects COMMON_CLK, there is no need for MACH_MMP_DT to select COMMON_CLK. Link: https://lore.kernel.org/r/20200505150722.1575-11-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-15ARM: mmp: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven
The Marvell MMP platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Link: https://lore.kernel.org/r/20200505154536.4099-4-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-12ARM: mmp: Remove legacy clk codeStephen Boyd
Remove all the legacy clk code that supports a non-common clk framework implementation of 'struct clk' in mach-mmp. This code doesn't look to be compiled anymore given that the MMP is fully supported in the multi-platform config via ARCH_MULTIPLATFORM as of commit 377524dc4d77 ("ARM: mmp: move into ARCH_MULTIPLATFORM"). The ARCH_MULTIPLATFORM config selects COMMON_CLK and therefore the Makefile rule can never actually compile the code in these files. Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Russell King <linux@armlinux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200409064416.83340-9-sboyd@kernel.org Reviewed-by: Arnd Bergmann <arnd@arndb.de> [sboyd@kernel.org: Squash in a clock.h include removal found by Stephen Rothwell <sfr@canb.auug.org.au>]
2020-05-05ARM: Remove redundant COMMON_CLK selectsStephen Boyd
The mulitplatform config already selects COMMON_CLK, so selecting it again is not useful. Remove these selects from ARM platforms that are part of the multiplatform build. Reviewed-by: "Andreas Färber" <afaerber@suse.de> # actions Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> # actions Cc: Russell King <linux@armlinux.org.uk> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20200409064416.83340-2-sboyd@kernel.org
2020-03-27ARM: mmp: replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Link: https://lore.kernel.org/r/20200327124437.4239-1-afzal.mohd.ma@gmail.com Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06ARM: mmp: do not divide the clock rateLubomir Rintel
This was done because the clock driver returned the wrong rate, which is fixed in "clk: mmp2: Fix the order of timer mux parents" patch. Link: https://lore.kernel.org/r/20191218190454.420358-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: mmp: include the correct cputype.hArnd Bergmann
The file was moved, causing a build error: In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28: arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory Include it from the new location. Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-17ARM: mmp: remove MMP3 USB PHY registers from regs-usb.hLubomir Rintel
Nothing in mach-mmp/ uses them and they belong to the PHY driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: move cputype.h to include/linux/soc/Lubomir Rintel
Let's move cputype.h away from mach-mmp/ so that the drivers outside that directory are able to tell the precise silicon revision. The MMP3 USB OTG PHY driver needs this. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: add SMP supportLubomir Rintel
Used to bring up the second core on MMP3. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: add support for MMP3 SoCLubomir Rintel
Similar to MMP2, which this patch is based on. Known differencies from MMP2 are: * Two PJ4B cores instead of one PJ4 * Tauros 3 L2 cache controller instead of Tauros 2 * A GIC interrupt controller optionally used instead of the MMP one * A TWD local timer * Different USB2 PHY * A USB3 SS controller * More interrupt muxes Hard to tell what else is different, because documentation is not available. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: define MMP_CHIPID by the means of CIU_REG()Lubomir Rintel
A rather trivial cosmetic improvement. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARELubomir Rintel
This makes things just a tiny bit simpler. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17ARM: mmp: map the PGU as wellLubomir Rintel
The MMP2 and later includes a system control unit in this area. We'll need that to initialize the secondary core on MMP3. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-08-30irqchip/mmp: Mask off interrupts from other coresAndres Salomon
On mmp3, there's an extra set of ICU registers (ICU2) that handle interrupts on the extra cores. When masking off interrupts on MP1, these should be masked as well. We add a new interrupt controller via device tree to identify when we're looking at an mmp3 machine via compatible field of "marvell,mmp3-intc". [lkundrak@v3.sk: Changed "mrvl,mmp3-intc" compatible strings to "marvell,mmp3-intc". Tidied up the subject line a bit.] Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk -- Changes since v1: - Moved mmp3-specific mmp_icu2_base initialization from mmp_init_bases() to mmp3_of_init() so that we don't have to check for marvell,mmp3-intc compatibility twice. - Drop an superfluous call to irq_set_default_host() arch/arm/mach-mmp/regs-icu.h | 3 +++ drivers/irqchip/irq-mmp.c | 48 ++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506Thomas Gleixner
Based on 1 normalized pattern(s): this software program is licensed subject to the gnu general public license gpl version 2 june 1991 available at http www fsf org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Daniel German <dmg@turingmachine.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.687420463@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as publishhed by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06regulator: fixed/gpio: Pull inversion/OD into gpiolibLinus Walleij
This pushes the handling of inversion semantics and open drain settings to the GPIO descriptor and gpiolib. All affected board files are also augmented. This is especially nice since we don't have to have any confusing flags passed around to the left and right littering the fixed and GPIO regulator drivers and the regulator core. It is all just very straight-forward: the core asks the GPIO line to be asserted or deasserted and gpiolib deals with the rest depending on how the platform is configured: if the line is active low, it deals with that, if the line is open drain, it deals with that too. Cc: Alexander Shiyan <shc_work@mail.ru> # i.MX boards user Cc: Haojian Zhuang <haojian.zhuang@gmail.com> # MMP2 maintainer Cc: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1 maintainer Cc: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> # EM-X270 maintainer Cc: Robert Jarzmik <robert.jarzmik@free.fr> # EZX maintainer Cc: Philipp Zabel <philipp.zabel@gmail.com> # Magician maintainer Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Daniel Mack <zonque@gmail.com> # Raumfeld maintainer Cc: Marc Zyngier <marc.zyngier@arm.com> # Zeus maintainer Cc: Geert Uytterhoeven <geert+renesas@glider.be> # SuperH pinctrl/GPIO maintainer Cc: Russell King <rmk+kernel@armlinux.org.uk> # SA1100 Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> #OMAP1 Amstrad Delta Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-31Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ...
2018-12-31Merge branch 'fixes' into next/socOlof Johansson
Merge in fixes here, since the last batch didn't make it in before the release of 4.20, and we might as well group them with this set of patches. * fixes: (822 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: realview: Fix some more duplicate regulator nodes MAINTAINERS: update entry for MMP platform ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt MAINTAINERS: mediatek: Update SoC entry ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs + Linux 4.20-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-12ARM: mmp: fix pxa168_device_usb_phy use on aspeniteArnd Bergmann
This one ended up in the wrong header file, causing a build failure on at least one platform: arch/arm/mach-mmp/aspenite.c: In function 'common_init': arch/arm/mach-mmp/aspenite.c:260:28: error: 'pxa168_device_usb_phy' undeclared (first use in this function); did you mean 'pxa168_device_ssp5'? We can just include both the pxa168.h and pxa910.h headers to make that work, which gets us to the next failure: arch/arm/mach-mmp/aspenite.o: In function `common_init': aspenite.c:(.init.text+0x1c0): undefined reference to `pxa168_device_usb_phy' This is solved by using the matching ifdef check around the USB device registration, enabling them only when either USB host or gadget mode are enabled. Fixes: a225daf72ee7 ("ARM: mmp: add a pxa-usb-phy device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-12ARM: mmp: fix timer_init callsArnd Bergmann
The change to passing the timer frequency as a function argument was a good idea, but caused a build failure for one user that was missed in the update: arch/arm/mach-mmp/time.c: In function 'mmp_dt_init_timer': arch/arm/mach-mmp/time.c:242:2: error: implicit declaration of function 'timer_init'; did you mean 'hrtimer_init'? [-Werror=implicit-function-declaration] Change that as well to fix the build error, and rename the function to put it into a proper namespace and make it clearer what is actually going on. I saw that the high 6500000 HZ frequency was previously only set with CONFIG_MMP2, but is now also used with MMP (pxa910), so I'm changing that back here. Please make sure that the frequencies are all correct now. Fixes: f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03ARM: mmp2: DT: be compatible with mrvl,mmp2Lubomir Rintel
There are more boards that can work with mmp2-dt than just Brownstone. The OLPC XO-1.75 device tree root is compatible with "mrvl,mmp2" only. The "mrvl,mmp2-brownstone" string is safe to remove: the Brownstone device tree contains the "mrvl,mmp2" compatible string too. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dtLubomir Rintel
cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for multiplatform kernels. Fix it by also considering mmp_chip_id, as is done for cpu_is_pxa168() and cpu_is_pxa910() above. Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too. Note: CONFIG_CPU_MMP2 is only used for machines that use board files instead of DT. It should perhaps be renamed. I'm not doing it now, because I don't have a better idea. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspeniteLubomir Rintel
This will replace the *_pdata.phy_{de,}init() Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: mmp: add a pxa-usb-phy deviceLubomir Rintel
This is to replace the USB PHY initialization code (pxa_usb_phy_init(), pxa_usb_phy_deinit()) with a proper PHY driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: mmp/mmp2: dt: enable the clockLubomir Rintel
The device-tree booted MMP2 needs to enable the timer clock, otherwise it would stop ticking when the boot finishes. It can also use the clock rate from the clk, the non-DT boards need to keep using the hardcoded rates. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30ARM: mmp2: initialize clocks before the timerLubomir Rintel
The timer shall enable its clock. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-10-26Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-09-20USB: EHCI: ehci-mv: use phy-pxa-usbLubomir Rintel
Use a proper PHY driver, instead of hooks to a board support package. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-17regulator: fixed: Convert to use GPIO descriptor onlyLinus Walleij
As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-02mtd: nand: remove useless fields from pxa3xx NAND platform dataMiquel Raynal
The "enable arbiter" bit is available only for pxa3xx based platforms but it was experimentally shown that even if this bit is reserved, some Marvell platforms (64-bit) actually need it to be set. The driver always set this bit regardless of this property, which is harmless. Then this property is not needed. The "num_cs" field is always 1 and for a good reason, the old driver (pxa3xx_nand.c) could only handle one. The new driver that replaces it (marvell_nand.c) can handle more, but better use device tree for such description. As there is only one available chip select, there is no need for an array of partitions neither an array of partition numbers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-23mtd: nand: use Marvell reworked NAND controller driver with all platformsMiquel Raynal
Compile marvell_nand.c instead of pxa3xx_nand.c with all PXA based SoCs. Convert all board files and defconfigs so that the new driver is used everywhere instead of the old one. Board files using CONFIG_MTD_NAND_PXA3xx now use CONFIG_MTD_NAND_MARVELL instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2017-11-28ARM: pxa: move header file out of I2C realmWolfram Sang
include/linux/i2c is to be deprecated. Move this platform_data to the proper platform_data dir. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-01Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/nextBoris Brezillon
From Boris: " This pull request contains the following core changes: * Fix memory leaks in the core * Remove unused NAND locking support * Rename nand.h into rawnand.h (preparing support for spi NANDs) * Use NAND_MAX_ID_LEN where appropriate * Fix support for 20nm Hynix chips * Fix support for Samsung and Hynix SLC NANDs and the following driver changes: * Various cleanup, improvements and fixes in the qcom driver * Fixes for bugs detected by various static code analysis tools * Fix mxc ooblayout definition * Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers * Request the reset line in exclusive mode in the sunxi driver * Fix a build error in the orion-nand driver when compiled for ARMv4 * Allow 64-bit mvebu platforms to select the PXA3XX driver "
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-07-27ARM: mmp: mark usb_dma_mask as __maybe_unusedArnd Bergmann
This variable may be used by some devices that each have their on Kconfig symbol, or by none of them, and that causes a build warning: arch/arm/mach-mmp/devices.c:241:12: error: 'usb_dma_mask' defined but not used [-Werror=unused-variable] Marking it __maybe_unused avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-30ARM: mmp: let clk_disable() return immediately if clk is NULLMasahiro Yamada
In many of clk_disable() implementations, it is a no-op for a NULL pointer input, but this is one of the exceptions. Making it treewide consistent will allow clock consumers to call clk_disable() without NULL pointer check. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>