aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100
AgeCommit message (Collapse)Author
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-07platform-drivers: move probe to .devinit.text in arch/armUwe Kleine-König
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02[ARM] sa1111: allow cascaded IRQs to be used by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: allow cascaded IRQ base to be specified by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: remove unused IRQs and avoid unnecessary cascadeEric Miao
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*. IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as IRQ_LOCOMO_KEY. IRQ_LOCOMO_GPIO and the demultiplex handler should really be living somewhere else. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: avoid unnecessary cascaded keyboard IRQEric Miao
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced locomokbd_{open,close} for masking/unmasking of the keyboard IRQ. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] sa1100: remove unreferenced IRQ definitionsEric Miao
These IRQ definitions related to LOCOMO are never referenced anywhere, thus could be safely removed. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-22arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_modeUwe Kleine-König
These functions are called with irqs already off. This commit removes the calls to raw_local_irq_save and raw_local_irq_restore on platforms that don't have to use a shared interrupt for their timekeeping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-12-13ARM: fix sa1100 buildRussell King
Fix: arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get' include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here cpufreq_get() is used on these platforms to tell drivers what the CPU frequency is, and therefore the bus frequency - which is critical for setting the PCMCIA and LCD timings. Adding ifdefs to these drivers to select cpufreq_get() or some other interface adds confusion. Making these drivers use some other interface for the normal paths and cpufreq stuff for the cpufreq notifier is insane as well. (Why x86 can't provide a version of cpufreq_get() which returns the CPU frequency when CPUFREQ is disabled is beyond me, rather than requiring a dummy zero-returning cpufreq_get(). Especially as they do: unsigned long khz = cpufreq_get(cpu); if (!khz) khz = tsc_khz; In other words, if CPUFREQ is disabled, get it from tsc_khz - why not provide a dummy cpufreq_get() which returns tsc_khz?) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-06Merge branch 'for-lak' of git://git.linuxtogo.org/home/thesing/collie into ↵Russell King
sa1100
2009-12-06ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_requestDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driverDmitry Artamonow
Many features of h3100/h3600 (LCD, PCMCIA, Flash write, etc.) depend on correct functioning of GPIO expander handled by htc-egpio driver, so force its building in Kconfig. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keysDmitry Artamonow
Add support for "Power" and "Action" (joystick center) buttons - the only buttons on iPaq h3100/h3600 connected to GPIOs (other buttons are controlled by microcontroller) Also remove setting PWER for wakeup on Power button press - gpio-keys driver will handle it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5822/1: SA1100: h3100/h3600: clean up #includesDmitry Artamonow
After a code reorganization and following split, there's some #includes now unused. Clean them up and sort remaining alphabetticaly where possible. Compile tested. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplatesDmitry Artamonow
Correct boilerplates after files split. Also shorten them a bit - use standart GPL wording (as per http://lkml.org/lkml/2007/5/1/220) and drop changelog, which only entry about h3800 support and abstracted EGPIOs is just confusing now, as both of these features are gone. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5820/1: SA1100: h3100/h3600: split h3600.cDmitry Artamonow
Split common h3600.c into three separate files: h3100.c, h3600.c and h3xxx.c (the latter contains common code for h3100/h3600) Copyright boilerplates and #includes are copied intact and will be cleaned up later. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.hDmitry Artamonow
Combine both headers into one, rename to h3xxx.h and change all users accordingly. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitionsDmitry Artamonow
As all existing code was converted to gpiolib, drop no more used pre-gpiolib (bit-shifted) GPIO definintions. Supply new gpiolib-friendly definitions for GPIOs which don't have them yet. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputsDmitry Artamonow
After conversion to gpiolib there's still some GPIOs left, that get configured in *_mach_init() as outputs (using direct operations on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly sound related and should be configured by corresponding driver once it is written. Drop this initialisation and configure all GPIOs as input. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitionsDmitry Artamonow
As all the remaining users of these definitions (in pcmcia/sa1100_h3600 driver) were converted to gpio_to_irq(), they can be safely removed. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlersDmitry Artamonow
As all users of assign_h3600_egpio now converted to gpiolib, we can safely remove all assign_h3600_egpio handling code and definitions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to ↵Dmitry Artamonow
gpiolib Use of gpio_request/gpio_free in some callbacks may look ugly, but corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet) init/exit hooks and registering these gpios in *_mach_init is also not possible, because htc-gpio driver starts a bit later... Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driverDmitry Artamonow
It will be used for future conversion of assign_h3600_egpio calls to gpiolib. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpersDmitry Artamonow
h3100 and h3600 have different sets of LCD-controlling gpios, which mapped to the same "abstracted" EGPIO. As we plan to get rid of those abstracted egpios completely, we need to separate these helper functions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pinsDmitry Artamonow
sa1100_fb driver handles this Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.hDmitry Artamonow
PM_SUSPEND, PM_RESUME and machine_is_h3xxx() are not used anywhere in kernel (checked with git grep), so it's safe to remove them. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5796/1: SA1100: h3600: remove IRDA bits from serial PM callbackDmitry Artamonow
IRDA is handled by separate sa1100-ir driver and has nothing to do with sa1100_serial Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5797/1: SA1100: h3100/h3600: remove dead links from Kconfig help textDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5795/1: SA1100: h3100/h3600: mark *_mach_init functions as __initDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: no need to set PWER_RTCRussell King
The rtc-sa1100 driver takes care of this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: move serial port support functionsRussell King
No point calling sa1100_register_uart_fns early - these aren't used until late in the boot sequence. Also convert to gpiolib support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: convert H3100 IrDA to use generic gpio supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: provide a way to setup platform-controlled GPIOsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: separate IrDA machine specificsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: h3600: provide each iPAQ machine type with own init functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: sa11x0: convert set_xxx_data() to register_xxx()Russell King
Only register devices if we have platform data for those which require platform data. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-27collie: support pda_power driverThomas Kunze
This add the pda-power platform device to collie.
2009-11-27collie: convert to gpiolib for ucb1x00Thomas Kunze
Only the parts used for collie_battery are converted. The rest will be cleaned up later.
2009-11-27add gpiolib support to ucb1x00Thomas Kunze
The old access methods to the gpios will be removed when all users has been converted. (mainly ucb1x00-ts)
2009-11-27SA1100: make gpio_to_irq and reverse a macroThomas Kunze
The function can't be used for static initialisations so convert them to macros.
2009-11-27collie: prepare for gpiolib useThomas Kunze
prefix gpio definitions for direct register access with '_' so we can use the other names for gpio_request & co
2009-11-27collie: fix scoop convesion to new apiThomas Kunze
2009-10-07ARM: 5752/1: SA1100: fix building of h3100Dmitry Artamonow
Both iPaqs h3100 and h3600 currently share the same source file - h3600.c But Makefile builds it only if CONFIG_SA1100_H3600 selected, so selecting just CONFIG_SA1100_H3100 results in "no machine record defined" message and aborted compilation. Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28ARM: Remove unused CONFIG SA1100_H3XXXJaswinder Singh Rajput
Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Dmitry Artamonow <mad_soft@inbox.ru> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 10:47:25 +0000