| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit efd9e03facd0 ("arm64: Use static keys for CPU features")
introduced support for static keys in asm/cpufeature.h, including
linux/jump_label.h. When CC_HAVE_ASM_GOTO is not defined, this causes a
circular dependency via linux/atomic.h, asm/lse.h and asm/cpufeature.h.
This patch moves the capability macros out out of asm/cpufeature.h into
a separate asm/cpucaps.h and modifies some of the #includes accordingly.
Fixes: efd9e03facd0 ("arm64: Use static keys for CPU features")
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We haven't seen a whole lot of fixes for the first two weeks since the
merge window, but here is the batch that we have at the moment.
Nothing sticks out as particularly bad or scary, it's mostly a handful
of smaller fixes to several platforms. The Uniphier reset controller
changes could probably have been delayed to 4.10, but they're not
scary and just plumbing up driver changes that went in during the
merge window.
We're also adding another maintainer to Marvell Berlin platforms, to
help out when Sebastian is too busy. Yay teamwork!"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
ARM: dts: vf610: fix IRQ flag of global timer
ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
ARM: imx: gpc: Initialize all power domains
arm64: dts: Updated NAND DT properties for NS2 SVK
arm64: dts: uniphier: change MIO node to SD control node
ARM: dts: uniphier: change MIO node to SD control node
reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
arm64: dts: Add timer erratum property for LS2080A and LS1043A
arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
ARM: multi_v7_defconfig: Enable Intel e1000e driver
MAINTAINERS: add myself as Marvell berlin SoC maintainer
bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
ARM: dts: fix the SD card on the Snowball
arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
arm64: dts: marvell: fix clocksource for CP110 master SPI0
ARM: mvebu: Select corediv clk for all mvebu v7 SoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.
* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
http://github.com/Broadcom/stblinux into fixes
This pull request contains a single fix for Broadcom ARM64-based SoCs:
- Ray adds the required bus width and OOB sector size properties to the
Northstar 2 SVK reference board in order for the NAND controller to work
properly
* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.9:
- A couple of patches from Fabio to fix the GPC power domain regression
which is caused by PM Domain core change 0159ec670763dd
("PM / Domains: Verify the PM domain is present when adding a
provider"), and a related kernel crash seen with multi_v7_defconfig
build.
- Correct the PHY ID mask for AR8031 to match phy driver code.
- Apply new added timer erratum A008585 for LS1043A and LS2080A SoC.
- Correct vf610 global timer IRQ flag to avoid warning from gic driver
after commit 992345a58e0c ("irqchip/gic: WARN if setting the
interrupt type for a PPI fails").
* tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
ARM: dts: vf610: fix IRQ flag of global timer
ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
ARM: imx: gpc: Initialize all power domains
arm64: dts: Add timer erratum property for LS2080A and LS1043A
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes
UniPhier ARM SoC fixes for v4.9
- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl
* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: change MIO node to SD control node
ARM: dts: uniphier: change MIO node to SD control node
reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fix parameter name for __page_to_voff, to match its definition.
At present, we don't see any issue, as page_to_virt's caller
declares 'page'.
Fixes: 9f2875912dac ("arm64: mm: restrict virt_to_page() to the linear mapping")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When booting on NUMA system with memory-less node (no
memory dimm on this memory controller), the print
for setup_node_data() is incorrect:
NUMA: Initmem setup node 2 [mem 0x00000000-0xffffffffffffffff]
It can be fixed by printing [mem 0x00000000-0x00000000] when
end_pfn is 0, but print <memory-less node> will be more useful.
Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.")
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The pcpu_build_alloc_info() function group CPUs according to their
proximity, by call callback function @cpu_distance_fn from different
ARCHs.
For arm64 the callback of @cpu_distance_fn is
pcpu_cpu_distance(from, to)
-> node_distance(from, to)
The @from and @to for function node_distance() should be nid.
However, pcpu_cpu_distance() in arch/arm64/mm/numa.c just past the
cpu id for @from and @to, and didn't convert to numa node id.
For this incorrect cpu proximity get from ARCH, it may cause each CPU
in one group and make group_cnt out of bound:
setup_per_cpu_areas()
pcpu_embed_first_chunk()
pcpu_build_alloc_info()
in pcpu_build_alloc_info, since cpu_distance_fn will return
REMOTE_DISTANCE if we pass cpu ids (0,1,2...), so
cpu_distance_fn(cpu, tcpu) > LOCAL_DISTANCE will wrongly be ture.
This may results in triggering the BUG_ON(unit != nr_units) later:
[ 0.000000] kernel BUG at mm/percpu.c:1916!
[ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc1-00003-g14155ca-dirty #26
[ 0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT)
[ 0.000000] task: ffff000008d6e900 task.stack: ffff000008d60000
[ 0.000000] PC is at pcpu_embed_first_chunk+0x420/0x704
[ 0.000000] LR is at pcpu_embed_first_chunk+0x3bc/0x704
[ 0.000000] pc : [<ffff000008c754f4>] lr : [<ffff000008c75490>] pstate: 800000c5
[ 0.000000] sp : ffff000008d63eb0
[ 0.000000] x29: ffff000008d63eb0 [ 0.000000] x28: 0000000000000000
[ 0.000000] x27: 0000000000000040 [ 0.000000] x26: ffff8413fbfcef00
[ 0.000000] x25: 0000000000000042 [ 0.000000] x24: 0000000000000042
[ 0.000000] x23: 0000000000001000 [ 0.000000] x22: 0000000000000046
[ 0.000000] x21: 0000000000000001 [ 0.000000] x20: ffff000008cb3bc8
[ 0.000000] x19: ffff8413fbfcf570 [ 0.000000] x18: 0000000000000000
[ 0.000000] x17: ffff000008e49ae0 [ 0.000000] x16: 0000000000000003
[ 0.000000] x15: 000000000000001e [ 0.000000] x14: 0000000000000004
[ 0.000000] x13: 0000000000000000 [ 0.000000] x12: 000000000000006f
[ 0.000000] x11: 00000413fbffff00 [ 0.000000] x10: 0000000000000004
[ 0.000000] x9 : 0000000000000000 [ 0.000000] x8 : 0000000000000001
[ 0.000000] x7 : ffff8413fbfcf63c [ 0.000000] x6 : ffff000008d65d28
[ 0.000000] x5 : ffff000008d65e50 [ 0.000000] x4 : 0000000000000000
[ 0.000000] x3 : ffff000008cb3cc8 [ 0.000000] x2 : 0000000000000040
[ 0.000000] x1 : 0000000000000040 [ 0.000000] x0 : 0000000000000000
[...]
[ 0.000000] Call trace:
[ 0.000000] Exception stack(0xffff000008d63ce0 to 0xffff000008d63e10)
[ 0.000000] 3ce0: ffff8413fbfcf570 0001000000000000 ffff000008d63eb0 ffff000008c754f4
[ 0.000000] 3d00: ffff000008d63d50 ffff0000081af210 00000413fbfff010 0000000000001000
[ 0.000000] 3d20: ffff000008d63d50 ffff0000081af220 00000413fbfff010 0000000000001000
[ 0.000000] 3d40: 00000413fbfcef00 0000000000000004 ffff000008d63db0 ffff0000081af390
[ 0.000000] 3d60: 00000413fbfcef00 0000000000001000 0000000000000000 0000000000001000
[ 0.000000] 3d80: 0000000000000000 0000000000000040 0000000000000040 ffff000008cb3cc8
[ 0.000000] 3da0: 0000000000000000 ffff000008d65e50 ffff000008d65d28 ffff8413fbfcf63c
[ 0.000000] 3dc0: 0000000000000001 0000000000000000 0000000000000004 00000413fbffff00
[ 0.000000] 3de0: 000000000000006f 0000000000000000 0000000000000004 000000000000001e
[ 0.000000] 3e00: 0000000000000003 ffff000008e49ae0
[ 0.000000] [<ffff000008c754f4>] pcpu_embed_first_chunk+0x420/0x704
[ 0.000000] [<ffff000008c6658c>] setup_per_cpu_areas+0x38/0xc8
[ 0.000000] [<ffff000008c608d8>] start_kernel+0x10c/0x390
[ 0.000000] [<ffff000008c601d8>] __primary_switched+0x5c/0x64
[ 0.000000] Code: b8018660 17ffffd7 6b16037f 54000080 (d4210000)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
Fix by getting cpu's node id with early_cpu_to_node() then pass it
to node_distance() as the original intention.
Fixes: 7af3a0a99252 ("arm64/numa: support HAVE_SETUP_PER_CPU_AREA")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Its all generic atomic_long_t stuff now.
Tested-by: Jason Low <jason.low2@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds NAND DT properties for NS2 SVK to configure the bus
width width and OOB sector size
Signed-off-by: Prafulla Kota <prafulla.kota@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
I made a mistake bacuse the Media I/O block is not implemented in
this SoC.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The UniPhier reset driver (drivers/reset/reset-uniphier.c) has been
merged. Select ARCH_HAS_RESET_CONTROLLER from the SoC Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Pull KVM fixes from Radim Krčmář:
"ARM:
- avoid livelock when walking guest page tables
- fix HYP mode static keys without CC_HAVE_ASM_GOTO
MIPS:
- fix a build error without TRACEPOINTS_ENABLED
s390:
- reject a malformed userspace configuration
x86:
- suppress a warning without CONFIG_CPU_FREQ
- initialize whole irq_eoi array"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm/arm64: KVM: Map the BSS at HYP
arm64: KVM: Take S1 walks into account when determining S2 write faults
KVM: s390: reject invalid modes for runtime instrumentation
kvm: x86: memset whole irq_eoi
kvm/x86: Fix unused variable warning in kvm_timer_init()
KVM: MIPS: Add missing uaccess.h include
|
|
The WnR bit in the HSR/ESR_EL2 indicates whether a data abort was
generated by a read or a write instruction. For stage 2 data aborts
generated by a stage 1 translation table walk (i.e. the actual page
table access faults at EL2), the WnR bit therefore reports whether the
instruction generating the walk was a load or a store, *not* whether the
page table walker was reading or writing the entry.
For page tables marked as read-only at stage 2 (e.g. due to KSM merging
them with the tables from another guest), this could result in livelock,
where a page table walk generated by a load instruction attempts to
set the access flag in the stage 1 descriptor, but fails to trigger
CoW in the host since only a read fault is reported.
This patch modifies the arm64 kvm_vcpu_dabt_iswrite function to
take into account stage 2 faults in stage 1 walks. Since DBM cannot be
disabled at EL2 for CPUs that implement it, we assume that these faults
are always causes by writes, avoiding the livelock situation at the
expense of occasional, spurious CoWs.
We could, in theory, do a bit better by checking the guest TCR
configuration and inspecting the page table to see why the PTE faulted.
However, I doubt this is measurable in practice, and the threat of
livelock is real.
Cc: <stable@vger.kernel.org>
Cc: Julien Grall <julien.grall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Both the LS1043A and LS2080A platforms are affected by the Freescale
A008585 erratum. Advertise it in their respective device trees.
Signed-off-by: Scott Wood <oss@buserror.net>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Most of these are CC'd for stable, but there are a few fixing issues
introduced during the recent merge window too.
There's also a fix for the xgene PMU driver, but it seemed daft to
send as a separate pull request, so I've included it here with the
rest of the fixes.
- Fix ACPI boot due to recent broken NUMA changes
- Fix remote enabling of CPU features requiring PSTATE bit manipulation
- Add address range check when emulating user cache maintenance
- Fix LL/SC loops that allow compiler to introduce memory accesses
- Fix recently added write_sysreg_s macro
- Ensure MDCR_EL2 is initialised on qemu targets without a PMU
- Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE
- Correctly drive recent ld when building relocatable Image
- Remove junk IS_ERR check from xgene PMU driver added during merge window
- pr_cont fixes after core changes in the merge window"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove pr_cont abuse from mem_init
arm64: fix show_regs fallout from KERN_CONT changes
arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y
arm64: suspend: Reconfigure PSTATE after resume from idle
arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call
arm64: cpufeature: Schedule enable() calls instead of calling them via IPI
arm64: Cortex-A53 errata workaround: check for kernel addresses
arm64: percpu: rewrite ll/sc loops in assembly
arm64: swp emulation: bound LL/SC retries before rescheduling
arm64: sysreg: Fix use of XZR in write_sysreg_s
arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y
arm64: kernel: Init MDCR_EL2 even in the absence of a PMU
perf: xgene: Remove bogus IS_ERR() check
arm64: kernel: numa: fix ACPI boot cpu numa node mapping
arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y
|
|
All the lines printed by mem_init are independent, with each ending with
a newline. While they logically form a large block, none are actually
continuations of previous lines.
The kernel-side printk code and the userspace demsg tool differ in their
handling of KERN_CONT following a newline, and while this isn't always a
problem kernel-side, it does cause difficulty for userspace. Using
pr_cont causes the userspace tool to not print line prefix (e.g.
timestamps) even when following a newline, mis-aligning the output and
making it harder to read, e.g.
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
.text : 0xffff000008080000 - 0xffff0000088b0000 ( 8384 KB)
.rodata : 0xffff0000088b0000 - 0xffff000008c50000 ( 3712 KB)
.init : 0xffff000008c50000 - 0xffff000008d50000 ( 1024 KB)
.data : 0xffff000008d50000 - 0xffff000008e25200 ( 853 KB)
.bss : 0xffff000008e25200 - 0xffff000008e6bec0 ( 284 KB)
fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
0xffff7e0000000000 - 0xffff7e0026000000 ( 608 MB actual)
memory : 0xffff800000000000 - 0xffff800980000000 ( 38912 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Fix this by using pr_notice consistently for all lines, which both the
kernel and userspace are happy with.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Recently in commit 4bcc595ccd80decb ("printk: reinstate KERN_CONT for
printing continuation lines"), the behaviour of printk changed w.r.t.
KERN_CONT. Now, KERN_CONT is mandatory to continue existing lines.
Without this, prefixes are inserted, making output illegible, e.g.
[ 1007.069010] pc : [<ffff00000871898c>] lr : [<ffff000008718948>] pstate: 40000145
[ 1007.076329] sp : ffff000008d53ec0
[ 1007.079606] x29: ffff000008d53ec0 [ 1007.082797] x28: 0000000080c50018
[ 1007.086160]
[ 1007.087630] x27: ffff000008e0c7f8 [ 1007.090820] x26: ffff80097631ca00
[ 1007.094183]
[ 1007.095653] x25: 0000000000000001 [ 1007.098843] x24: 000000ea68b61cac
[ 1007.102206]
... or when dumped with the userpace dmesg tool, which has slightly
different implicit newline behaviour. e.g.
[ 1007.069010] pc : [<ffff00000871898c>] lr : [<ffff000008718948>] pstate: 40000145
[ 1007.076329] sp : ffff000008d53ec0
[ 1007.079606] x29: ffff000008d53ec0
[ 1007.082797] x28: 0000000080c50018
[ 1007.086160]
[ 1007.087630] x27: ffff000008e0c7f8
[ 1007.090820] x26: ffff80097631ca00
[ 1007.094183]
[ 1007.095653] x25: 0000000000000001
[ 1007.098843] x24: 000000ea68b61cac
[ 1007.102206]
We can't simply always use KERN_CONT for lines which may or may not be
continuations. That causes line prefixes (e.g. timestamps) to be
supressed, and the alignment of all but the first line will be broken.
For even more fun, we can't simply insert some dummy empty-string printk
calls, as GCC warns for an empty printk string, and even if we pass
KERN_DEFAULT explcitly to silence the warning, the prefix gets swallowed
unless there is an additional part to the string.
Instead, we must manually iterate over pairs of registers, which gives
us the legible output we want in either case, e.g.
[ 169.771790] pc : [<ffff00000871898c>] lr : [<ffff000008718948>] pstate: 40000145
[ 169.779109] sp : ffff000008d53ec0
[ 169.782386] x29: ffff000008d53ec0 x28: 0000000080c50018
[ 169.787650] x27: ffff000008e0c7f8 x26: ffff80097631de00
[ 169.792913] x25: 0000000000000001 x24: 00000027827b2cf4
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
GNU ld used to set the ELF file type to ET_DYN for PIE executables, which
is the same file type used for shared libraries. However, this was changed
recently, and now PIE executables are emitted as ET_EXEC instead.
The distinction is only relevant for ELF loaders, and so there is little
reason to care about the difference when building the kernel, which is
why the change has gone unnoticed until now.
However, debuggers do use the ELF binary, and expect ET_EXEC type files
to appear in memory at the exact offset described in the ELF metadata.
This means source level debugging is no longer possible when KASLR is in
effect or when executing the stub.
So add the -shared LD option when building with CONFIG_RELOCATABLE=y. This
forces the ELF file type to be set to ET_DYN (which is what you get when
building with binutils 2.24 and earlier anyway), and has no other ill
effects.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The suspend/resume path in kernel/sleep.S, as used by cpu-idle, does not
save/restore PSTATE. As a result of this cpufeatures that were detected
and have bits in PSTATE get lost when we resume from idle.
UAO gets set appropriately on the next context switch. PAN will be
re-enabled next time we return from user-space, but on a preemptible
kernel we may run work accessing user space before this point.
Add code to re-enable theses two features in __cpu_suspend_exit().
We re-use uao_thread_switch() passing current.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 338d4f49d6f7 ("arm64: kernel: Add support for Privileged Access
Never") enabled PAN by enabling the 'SPAN' feature-bit in SCTLR_EL1.
This means the PSTATE.PAN bit won't be set until the next return to the
kernel from userspace. On a preemptible kernel we may schedule work that
accesses userspace on a CPU before it has done this.
Now that cpufeature enable() calls are scheduled via stop_machine(), we
can set PSTATE.PAN from the cpu_enable_pan() call.
Add WARN_ON_ONCE(in_interrupt()) to check the PSTATE value we updated
is not immediately discarded.
Reported-by: Tony Thompson <anthony.thompson@arm.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
[will: fixed typo in comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The enable() call for a cpufeature/errata is called using on_each_cpu().
This issues a cross-call IPI to get the work done. Implicitly, this
stashes the running PSTATE in SPSR when the CPU receives the IPI, and
restores it when we return. This means an enable() call can never modify
PSTATE.
To allow PAN to do this, change the on_each_cpu() call to use
stop_machine(). This schedules the work on each CPU which allows
us to modify PSTATE.
This involves changing the protype of all the enable() functions.
enable_cpu_capabilities() is called during boot and enables the feature
on all online CPUs. This path now uses stop_machine(). CPU features for
hotplug'd CPUs are enabled by verify_local_cpu_features() which only
acts on the local CPU, and can already modify the running PSTATE as it
is called from secondary_start_kernel().
Reported-by: Tony Thompson <anthony.thompson@arm.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 7dd01aef0557 ("arm64: trap userspace "dc cvau" cache operation on
errata-affected core") adds code to execute cache maintenance instructions
in the kernel on behalf of userland on CPUs with certain ARM CPU errata.
It turns out that the address hasn't been checked to be a valid user
space address, allowing userland to clean cache lines in kernel space.
Fix this by introducing an address check before executing the
instructions on behalf of userland.
Since the address doesn't come via a syscall parameter, we can't just
reject tagged pointers and instead have to remove the tag when checking
against the user address limit.
Cc: <stable@vger.kernel.org>
Fixes: 7dd01aef0557 ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[will: rework commit message + replace access_ok with max_user_addr()]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Writing the outer loop of an LL/SC sequence using do {...} while
constructs potentially allows the compiler to hoist memory accesses
between the STXR and the branch back to the LDXR. On CPUs that do not
guarantee forward progress of LL/SC loops when faced with memory
accesses to the same ERG (up to 2k) between the failed STXR and the
branch back, we may end up livelocking.
This patch avoids this issue in our percpu atomics by rewriting the
outer loop as part of the LL/SC inline assembly block.
Cc: <stable@vger.kernel.org>
Fixes: f97fc810798c ("arm64: percpu: Implement this_cpu operations")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If a CPU does not implement a global monitor for certain memory types,
then userspace can attempt a kernel DoS by issuing SWP instructions
targetting the problematic memory (for example, a framebuffer mapped
with non-cacheable attributes).
The SWP emulation code protects against these sorts of attacks by
checking for pending signals and potentially rescheduling when the STXR
instruction fails during the emulation. Whilst this is good for avoiding
livelock, it harms emulation of legitimate SWP instructions on CPUs
where forward progress is not guaranteed if there are memory accesses to
the same reservation granule (up to 2k) between the failing STXR and
the retry of the LDXR.
This patch solves the problem by retrying the STXR a bounded number of
times (4) before breaking out of the LL/SC loop and looking for
something else to do.
Cc: <stable@vger.kernel.org>
Fixes: bd35a4adc413 ("arm64: Port SWP/SWPB emulation support from arm")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
It was invented for sdio only, and should not be used for sdmmc
or emmc. Remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
mvebu fixes for 4.8 (part 3)
- Select corediv clk for all mvebu v7 SoC
- Fix clocksource for CP110 master SPI0 for Armada 7K/8K
* tag 'mvebu-fixes-4.8-3' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: fix clocksource for CP110 master SPI0
ARM: mvebu: Select corediv clk for all mvebu v7 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit 8a71f0c656e0 ("arm64: sysreg: replace open-coded mrs_s/msr_s with
{read,write}_sysreg_s") introduced a write_sysreg_s macro for writing
to system registers that are not supported by binutils.
Unfortunately, this was implemented with the wrong template (%0 vs %x0),
so in the case that we are writing a constant 0, we will generate
invalid instruction syntax and bail with a cryptic assembler error:
| Error: constant expression required
This patch fixes the template.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The RANDOMIZE_MODULE_REGION_FULL Kconfig option allows KASLR to be
configured in such a way that kernel modules and the core kernel are
allocated completely independently, which implies that modules are likely
to require branches via PLT entries to reach the core kernel. The dynamic
ftrace code does not expect that, and assumes that it can patch module
code to perform a relative branch to anywhere in the core kernel. This
may result in errors such as
branch_imm_common: offset out of range
------------[ cut here ]------------
WARNING: CPU: 3 PID: 196 at kernel/trace/ftrace.c:1995 ftrace_bug+0x220/0x2e8
Modules linked in:
CPU: 3 PID: 196 Comm: systemd-udevd Not tainted 4.8.0-22-generic #24
Hardware name: AMD Seattle/Seattle, BIOS 10:34:40 Oct 6 2016
task: ffff8d1bef7dde80 task.stack: ffff8d1bef6b0000
PC is at ftrace_bug+0x220/0x2e8
LR is at ftrace_process_locs+0x330/0x430
So make RANDOMIZE_MODULE_REGION_FULL mutually exclusive with DYNAMIC_FTRACE
at the Kconfig level.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit f436b2ac90a0 ("arm64: kernel: fix architected PMU registers
unconditional access") made sure we wouldn't access unimplemented
PMU registers, but also left MDCR_EL2 uninitialized in that case,
leading to trap bits being potentially left set.
Make sure we always write something in that register.
Fixes: f436b2ac90a0 ("arm64: kernel: fix architected PMU registers unconditional access")
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must
bind to node0") removed the numa cpu<->node mapping restriction whereby
logical cpu 0 always corresponds to numa node 0; removing the
restriction was correct, in that it does not really exist in practice
but the commit only updated the early mapping of logical cpu 0 to its
real numa node for the DT boot path, missing the ACPI one, leading to
boot failures on ACPI systems owing to missing node<->cpu map for
logical cpu 0.
Fix the issue by updating the ACPI boot path with code that carries out
the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
what is currently done in the DT boot path.
Fixes: 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
As it turns out, the KASLR code breaks CONFIG_MODVERSIONS, since the
kcrctab has an absolute address field that is relocated at runtime
when the kernel offset is randomized.
This has been fixed already for PowerPC in the past, so simply wire up
the existing code dealing with this issue.
Cc: <stable@vger.kernel.org>
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Tested-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
I observed false KSAN positives in the sctp code, when
sctp uses jprobe_return() in jsctp_sf_eat_sack().
The stray 0xf4 in shadow memory are stack redzones:
[ ] ==================================================================
[ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480
[ ] Read of size 1 by task syz-executor/18535
[ ] page:ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0
[ ] flags: 0x1fffc0000000000()
[ ] page dumped because: kasan: bad access detected
[ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28
[ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ ] ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8
[ ] ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000
[ ] ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370
[ ] Call Trace:
[ ] [<ffffffff82d2b849>] dump_stack+0x12e/0x185
[ ] [<ffffffff817d3169>] kasan_report+0x489/0x4b0
[ ] [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20
[ ] [<ffffffff82d49529>] memcmp+0xe9/0x150
[ ] [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0
[ ] [<ffffffff817d2031>] save_stack+0xb1/0xd0
[ ] [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0
[ ] [<ffffffff817d05b8>] kfree+0xc8/0x2a0
[ ] [<ffffffff85b03f19>] skb_free_head+0x79/0xb0
[ ] [<ffffffff85b0900a>] skb_release_data+0x37a/0x420
[ ] [<ffffffff85b090ff>] skb_release_all+0x4f/0x60
[ ] [<ffffffff85b11348>] consume_skb+0x138/0x370
[ ] [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180
[ ] [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70
[ ] [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0
[ ] [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0
[ ] [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190
[ ] [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20
[ ... ]
[ ] Memory state around the buggy address:
[ ] ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ^
[ ] ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ==================================================================
KASAN stack instrumentation poisons stack redzones on function entry
and unpoisons them on function exit. If a function exits abnormally
(e.g. with a longjmp like jprobe_return()), stack redzones are left
poisoned. Later this leads to random KASAN false reports.
Unpoison stack redzones in the frames we are going to jump over
before doing actual longjmp in jprobe_return().
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: kasan-dev@googlegroups.com
Cc: surovegin@google.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Please don't add these for vcc_sd, and mmc-core/driver will control
it. Otherwise, it will waste energy even without sdmmc in slot.
Moreover, it will causes a bug:
If we insert/remove sd card, we could see
[9.337271] mmc0: new ultra high speed SDR25 SDHC card at address 0007
[9.345144] mmcblk0: mmc0:0007 SD32G 29.3 GiB
This is okay for normal sd insert/remove test, but when I debug some
issues for sdmmc, I did unbind/bind test. And there is a interesting
phenomenon when we bind the driver again:
[58.314069] mmc0: new high speed SDHC card at address 0007
[58.320282] mmcblk0: mmc0:0007 SD32G 29.3 GiB
So the sd card could just support high speed without power cycle
since the vcc_sd is always on, which makes the sd card fail to
reinit its internal ocr mask.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more misc uaccess and vfs updates from Al Viro:
"The rest of the stuff from -next (more uaccess work) + assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
score: traps: Add missing include file to fix build error
fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
fs/super.c: fix race between freeze_super() and thaw_super()
overlayfs: Fix setting IOP_XATTR flag
iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
blackfin: no access_ok() for __copy_{to,from}_user()
arm64: don't zero in __copy_from_user{,_inatomic}
arm: don't zero in __copy_from_user_inatomic()/__copy_from_user()
arc: don't leak bits of kernel stack into coredump
alpha: get rid of tail-zeroing in __copy_user()
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
- Write same support added
- Minor ahci MSIX irq handling updates
- Non-critical SCSI command translation fixes
- Controller specific changes
* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
libata: remove <asm-generic/libata-portmap.h>
libata: remove unused definitions from <asm/libata-portmap.h>
pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
ata: Replace BUG() with BUG_ON().
ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
libata: Some drives failing on SCT Write Same
ahci: use pci_alloc_irq_vectors
libata: SCT Write Same handle ATA_DFLAG_PIO
libata: SCT Write Same / DSM Trim
libata: Add support for SCT Write Same
libata: Safely overwrite attached page in WRITE SAME xlat
ahci: also use a per-port lock for the multi-MSIX case
ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
ahci: st: Add ports-implemented property in support
ahci: qoriq: enable snoopable sata read and write
ahci: qoriq: adjust sata parameter
libata-scsi: fix MODE SELECT translation for Control mode page
libata-scsi: use u8 array to store mode page copy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal managament updates from Zhang Rui:
- Enhance thermal "userspace" governor to export the reason when a
thermal event is triggered and delivered to user space. From Srinivas
Pandruvada
- Introduce a single TSENS thermal driver for the different versions of
the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
msm8916, msm8960, msm8974 and msm8996 families is also added. From
Rajendra Nayak
- Introduce hardware-tracked trip points support to the device tree
thermal sensor framework. The framework supports an arbitrary number
of trip points. Whenever the current temperature is changed, the trip
points immediately below and above the current temperature are found,
driver callback is invoked to program the hardware to get notified
when either of the two trip points are triggered. Hardware-tracked
trip points support for rockchip thermal driver is also added at the
same time. From Sascha Hauer, Caesar Wang
- Introduce a new thermal driver, which enables TMU (Thermal Monitor
Unit) on QorIQ platform. From Jia Hongtao
- Introduce a new thermal driver for Maxim MAX77620. From Laxman
Dewangan
- Introduce a new thermal driver for Intel platforms using WhiskeyCove
PMIC. From Bin Gao
- Add mt2701 chip support to MTK thermal driver. From Dawei Chien
- Enhance Tegra thermal driver to enable soctherm node and set
"critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
Ni
- Add resume support for tango thermal driver. From Marc Gonzalez
- several small fixes and improvements for rockchip, qcom, imx, rcar,
mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
Kang
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
thermal: int3403: Process trip change notification
thermal: int340x: New Interface to read trip and notify
thermal: user_space gov: Add additional information in uevent
thermal: Enhance thermal_zone_device_update for events
arm64: tegra: set hot trips for Tegra210
arm64: tegra: set critical trips for Tegra210
arm64: tegra: add soctherm node for Tegra210
arm64: tegra: set hot trips for Tegra132
arm64: tegra: set critical trips for Tegra132
arm64: tegra: use tegra132-soctherm for Tegra132
arm: tegra: set hot trips for Tegra124
arm: tegra: set critical trips for Tegra124
thermal: tegra: add hw-throttle for Tegra132
thermal: tegra: add hw-throttle function
of: Add bindings of hw throttle for Tegra soctherm
thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
thermal: Add Mediatek thermal driver for mt2701.
dt-bindings: thermal: Add binding document for Mediatek thermal controller
thermal: max77620: Add thermal driver for reporting junction temp
thermal: max77620: Add DT binding doc for thermal driver
...
|
|
Merge more updates from Andrew Morton:
- a few block updates that fell in my lap
- lib/ updates
- checkpatch
- autofs
- ipc
- a ton of misc other things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
mm: split gfp_mask and mapping flags into separate fields
fs: use mapping_set_error instead of opencoded set_bit
treewide: remove redundant #include <linux/kconfig.h>
hung_task: allow hung_task_panic when hung_task_warnings is 0
kthread: add kerneldoc for kthread_create()
kthread: better support freezable kthread workers
kthread: allow to modify delayed kthread work
kthread: allow to cancel kthread work
kthread: initial support for delayed kthread work
kthread: detect when a kthread work is used by more workers
kthread: add kthread_destroy_worker()
kthread: add kthread_create_worker*()
kthread: allow to call __kthread_create_on_node() with va_list args
kthread/smpboot: do not park in kthread_create_on_cpu()
kthread: kthread worker API cleanup
kthread: rename probe_kthread_data() to kthread_probe_data()
scripts/tags.sh: enable code completion in VIM
mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping
kdump, vmcoreinfo: report memory sections virtual addresses
ipc/sem.c: add cond_resched in exit_sme
...
|
|
Kernel source files need not include <linux/kconfig.h> explicitly
because the top Makefile forces to include it with:
-include $(srctree)/include/linux/kconfig.h
This commit removes explicit includes except the following:
* arch/s390/include/asm/facilities_src.h
* tools/testing/radix-tree/linux/kernel.h
These two are used for host programs.
Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-5-jason@lakedaemon.net
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- support for interrupt virtualization in the AMD IOMMU driver. These
patches were shared with the KVM tree and are already merged through
that tree.
- generic DT-binding support for the ARM-SMMU driver. With this the
driver now makes use of the generic DMA-API code. This also required
some changes outside of the IOMMU code, but these are acked by the
respective maintainers.
- more cleanups and fixes all over the place.
* tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits)
iommu/amd: No need to wait iommu completion if no dte irq entry change
iommu/amd: Free domain id when free a domain of struct dma_ops_domain
iommu/amd: Use standard bitmap operation to set bitmap
iommu/amd: Clean up the cmpxchg64 invocation
iommu/io-pgtable-arm: Check for v7s-incapable systems
iommu/dma: Avoid PCI host bridge windows
iommu/dma: Add support for mapping MSIs
iommu/arm-smmu: Set domain geometry
iommu/arm-smmu: Wire up generic configuration support
Docs: dt: document ARM SMMU generic binding usage
iommu/arm-smmu: Convert to iommu_fwspec
iommu/arm-smmu: Intelligent SMR allocation
iommu/arm-smmu: Add a stream map entry iterator
iommu/arm-smmu: Streamline SMMU data lookups
iommu/arm-smmu: Refactor mmu-masters handling
iommu/arm-smmu: Keep track of S2CR state
iommu/arm-smmu: Consolidate stream map entry state
iommu/arm-smmu: Handle stream IDs more dynamically
iommu/arm-smmu: Set PRIVCFG in stage 1 STEs
iommu/arm-smmu: Support non-PCI devices with SMMUv3
...
|
|
Merge updates from Andrew Morton:
- fsnotify updates
- ocfs2 updates
- all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
console: don't prefer first registered if DT specifies stdout-path
cred: simpler, 1D supplementary groups
CREDITS: update Pavel's information, add GPG key, remove snail mail address
mailmap: add Johan Hovold
.gitattributes: set git diff driver for C source code files
uprobes: remove function declarations from arch/{mips,s390}
spelling.txt: "modeled" is spelt correctly
nmi_backtrace: generate one-line reports for idle cpus
arch/tile: adopt the new nmi_backtrace framework
nmi_backtrace: do a local dump_stack() instead of a self-NMI
nmi_backtrace: add more trigger_*_cpu_backtrace() methods
min/max: remove sparse warnings when they're nested
Documentation/filesystems/proc.txt: add more description for maps/smaps
mm, proc: fix region lost in /proc/self/smaps
proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self
proc: add LSM hook checks to /proc/<tid>/timerslack_ns
proc: relax /proc/<tid>/timerslack_ns capability requirements
meminfo: break apart a very long seq_printf with #ifdefs
seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char
proc: faster /proc/*/status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
- The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
automotive SoC similar to the ⅹ8a7795 chip we already support, but
the dts changes rely on a clock driver change that has been merged
for v4.9 through the clk tree.
- The Amlogic meson-gxbb (S905) platform gains support for a few
drivers merged through our tree, in particular the network and usb
driver changes are required and included here, and also the clk
tree changes.
- The Allwinner platforms have seen a large-scale change to their clk
drivers and the dts file updates must come after that. This
includes the newly added Nextthing GR8 platform, which is derived
from sun5i/A13.
- Some integrator (arm32) changes rely on clk driver changes.
- A single patch for lpc32xx has no such dependency but wasn't added
until just before the merge window"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
ARM: dts: lpc32xx: add device node for IRAM on-chip memory
ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
ARM: dts: sun8i: add pinmux for UART1 at PG
dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
dts: sun8i-h3: add pinmux definitions for I2C0-2
dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
dts: sun8i-h3: add pinmux definitions for UART2-3
ARM: dts: sun9i: a80-optimus: Disable EHCI1
ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"The 64-bit DT changes are surprisingly small this time, we only add
two SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext
UniPhier LD11 TV SoC, each with their reference boards.
There are three new machines added for existing SoC platforms:
- The Marvell Armada 8040 development board is an impressive
quad-core Cortex-A72 machine with three 10gbit ethernet interfaces
- Qualcomms DragonBoard 820c single-board computer is their current
high-end phone platform in the 96boards form factor
- Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range
Android box based on the 8-core rk3368 SoC"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (91 commits)
arm64: dts: berlin4ct: Add L2 cache topology
arm64: dts: berlin4ct: enable all wdt nodes unconditionally
arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes
arm64: dts: Add ZTE ZX296718 SoC dts and Makefile
arm64: dts: apm: Add DT node for APM X-Gene 2 CPU clocks
arm64: dts: apm: Add X-Gene SoC hwmon to device tree
arm64: dts: apm: Fix interrupt polarity for X-Gene PCIe legacy interrupts
arm64: dts: apm: Add APM X-Gene v2 SoC PMU DTS entries
arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries
arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K
arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes
arm64: dts: rockchip: add Type-C phy for RK3399
arm64: dts: rockchip: enable the gmac for rk3399 evb board
arm64: dts: rockchip: add the gmac needed node for rk3399
arm64: dts: rockchip: support the pmu node for rk3399
arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs
arm64: dts: rockchip: add the tcpc for rk3399 power domain
arm64: dts: rockchip: add efuse0 device node for rk3399
arm64: dts: rockchip: configure PCIe support for rk3399-evb
arm64: dts: rockchip: add the PCIe controller support for RK3399
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Aside from that, we gain initial support for two set-top-box
platforms, both of which already have 32-bit support in arch/arm:
- Broadcom adds abstract support for the bcm7xxx/brcmstb platform,
presumably the respective dts files and more information will
follow at a later point.
- The ZTE ZX296718 SoC for set-top-boxes, a relative of the 32-bit
ZX296702 SoC that we already support"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: add ZTE ZX SoC family
arm64: defconfig: enable ZTE ZX related config
arm64: defconfig: enable common modules for power management
arm64: defconfig: enable meson I2C
arm64: defconfig: enable meson SPI as module
arm64: defconfig: enable meson WDT as modules
arm64: defconfig: enable HW random as module
arm64: defconfig: Enable SDHI and GPIO_REGULATOR
arm64: configs: enable PCIe driver for Aardvark
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
arm64: defconfig: Enable QDF2432 config options
arm64: sunxi: Kconfig: add essential pinctrl driver
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
arm64: Add Broadcom Set Top Box Kconfig entry point
arm64: defconfig: enable xhci-platform
|
|
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".
We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.
This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.
Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This came to light when implementing native 64-bit atomics for ARCv2.
The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
to check whether atomic64_dec_if_positive() is available. It seems it
was needed when not every arch defined it. However as of current code
the Kconfig option seems needless
- for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a
generic definition of API is present lib/atomic64.c
- arches with native 64-bit atomics select it in arch/*/Kconfig and
define the API in their headers
So I see no point in keeping the Kconfig option
Compile tested for:
- blackfin (CONFIG_GENERIC_ATOMIC64)
- x86 (!CONFIG_GENERIC_ATOMIC64)
- ia64
Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
