aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2023-05-11ARM: dts: stm32: fix spi1 pin assignment on stm32mp15Alexandre Torgue
[ Upstream commit 1b9f0ec81af0012aae30aa3b4c711ad71d42e246 ] Bank A and B IOs can't be handled by the pin controller 'Z'. This patch assign spi1 pin definition to the correct controller. Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group") Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11ARM: dts: gta04: fix excess dma channel usageH. Nikolaus Schaller
[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ] OMAP processors support 32 channels but there is no check or inspect this except booting a device and looking at dmesg reports of not available channels. Recently some more subsystems with DMA (aes1+2) were added filling the list of dma channels beyond the limit of 32 (even if other parameters indicate 96 or 128 channels). This leads to random subsystem failures i(e.g. mcbsp for audio) after boot or boot messages that DMA can not be initialized. Another symptom is that /sys/kernel/debug/dmaengine/summary has 32 entries and does not show all required channels. Fix by disabling unused (on the GTA04 hardware) mcspi1...4. Each SPI channel allocates 4 DMA channels rapidly filling the available ones. Disabling unused SPI modules on the OMAP3 SoC may also save some energy (has not been checked). Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> [re-enabled aes2, improved commit subject line] Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-Id: <20230113211151.2314874-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP nodeManivannan Sadhasivam
[ Upstream commit 3b76b736cd9933ff88764ffec01cbd859c1475e7 ] Unit address of PCIe EP node should be 0x1c00000 as it has to match the first address specified in the reg property. This also requires sorting the node in the ascending order. Fixes: e6b69813283f ("ARM: dts: qcom: sdx55: Add support for PCIe EP") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11ARM: dts: qcom: ipq8064: Fix the PCI I/O port rangeManivannan Sadhasivam
[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ] For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses (0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for I/O region. While at it, let's use the missing 0x prefix for the addresses. Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11ARM: dts: qcom: ipq4019: Fix the PCI I/O port rangeManivannan Sadhasivam
[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ] For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address (0x40200000) specified in the ranges property for I/O region. While at it, let's use the missing 0x prefix for the addresses. Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11ARM: dts: qcom-apq8064: Fix opp table child nameKonrad Dybcio
[ Upstream commit b9745c275246a7e43c34d1b3be5ff9a9f3cf9305 ] The opp-320000000 name is rather misleading with the opp-hz value of 450 MHz. Fix it! Fixes: 8db0b6c7b636 ("ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230220120831.1591820-1-konrad.dybcio@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26ARM: dts: rockchip: fix a typo error for rk3288 spdif nodeJianqun Xu
[ Upstream commit 02c84f91adb9a64b75ec97d772675c02a3e65ed7 ] Fix the address in the spdif node name. Fixes: 874e568e500a ("ARM: dts: rockchip: Add SPDIF transceiver for RK3288") Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Sjoerd Simons <sjoerd@collabora.com> Link: https://lore.kernel.org/r/20230208091411.1603142-1-jay.xu@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memoryLuca Weiss
[ Upstream commit ecd240875e877d78fd03efbc62292f550872df3f ] Turns out these two memory regions also need to be avoided, otherwise weird things will happen when Linux tries to use this memory. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20ARM: 9290/1: uaccess: Fix KASAN false-positivesAndrew Jeffery
[ Upstream commit ceac10c83b330680cc01ceaaab86cd49f4f30d81 ] __copy_to_user_memcpy() and __clear_user_memset() had been calling memcpy() and memset() respectively, leading to false-positive KASAN reports when starting userspace: [ 10.707901] Run /init as init process [ 10.731892] process '/bin/busybox' started with executable stack [ 10.745234] ================================================================== [ 10.745796] BUG: KASAN: user-memory-access in __clear_user_memset+0x258/0x3ac [ 10.747260] Write of size 2687 at addr 000de581 by task init/1 Use __memcpy() and __memset() instead to allow userspace access, which is of course the intent of these functions. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06ARM: dts: aspeed: p10bmc: Update battery node nameEddie James
[ Upstream commit a8cef541dd5ef9445130660008c029205c4c5aa5 ] The ADC sensor for the battery needs to be named "iio-hwmon" for compatibility with user space applications. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com Fixes: bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrlPeng Fan
[ Upstream commit 1cd489e1ada1cffa56bd06fd4609f5a60a985d43 ] usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Peng Fan <peng.fan@nxp.com> Fixes: 9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrlPeng Fan
[ Upstream commit 957c04e9784c7c757e8cc293d7fb2a60cdf461b6 ] usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Peng Fan <peng.fan@nxp.com> Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrlPeng Fan
[ Upstream commit 3d37f7685d525e58674c23d607020e66d501dcd1 ] usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Peng Fan <peng.fan@nxp.com> Fixes: 3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11ARM: dts: spear320-hmi: correct STMPE GPIO compatibleKrzysztof Kozlowski
[ Upstream commit 33a0c1b850c8c85f400531dab3a0b022cdb164b1 ] The compatible is st,stmpe-gpio. Fixes: e2eb69183ec4 ("ARM: SPEAr320: DT: Add SPEAr 320 HMI board support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230225162237.40242-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Odroid HC1Krzysztof Kozlowski
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. This was not critical before, but since rework of thermal Devicetree initialization in the commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization"), this leads to errors registering thermal zones other than first one: thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2 thermal_sys: Failed to find thermal zone for tmu id=0 exynos-tmu 10064000.tmu: Failed to register sensor: -2 exynos-tmu: probe of 10064000.tmu failed with error -2 Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Odroid XUKrzysztof Kozlowski
commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. Since thermal-sensors property is already defined in included exynosi5410.dtsi, drop it from exynos5410-odroidxu.dts to fix the error and remoev redundancy. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Exynos5250Krzysztof Kozlowski
commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. Cc: <stable@vger.kernel.org> Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU") Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Odroid XU3 familyKrzysztof Kozlowski
commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. This was not critical before, but since rework of thermal Devicetree initialization in the commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization"), this leads to errors registering thermal zones other than first one: thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2 thermal_sys: Failed to find thermal zone for tmu id=0 exynos-tmu 10064000.tmu: Failed to register sensor: -2 exynos-tmu: probe of 10064000.tmu failed with error -2 Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Exynos4Krzysztof Kozlowski
commit 8e4505e617a80f601e2f53a917611777f128f925 upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct TMU phandle in Exynos4210Krzysztof Kozlowski
commit 408ab6786dbf6dd696488054c9559681112ef994 upstream. TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. Since thermal-sensors property is already defined in included exynos4-cpu-thermal.dtsi, drop it from exynos4210.dtsi to fix the error and remoev redundancy. Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU nodeManivannan Sadhasivam
commit af4ab377543853b690cc85b4c46cf976ab560dc2 upstream. SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500" compatible as the fallback to the SoC specific compatible. Cc: <stable@vger.kernel.org> # 5.12 Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU nodeManivannan Sadhasivam
commit 157178a7912e00a0aa0371dc9041952c1a21d112 upstream. SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500" compatible as the fallback to the SoC specific compatible. Cc: <stable@vger.kernel.org> # 5.19 Fixes: 98187f7b74bf ("ARM: dts: qcom: sdx65: Enable ARM SMMU") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: correct HDMI phy compatible in Exynos4Krzysztof Kozlowski
commit af1c89ddb74f170eccd5a57001d7317560b638ea upstream. The HDMI phy compatible was missing vendor prefix. Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phyMarkuss Broks
[ Upstream commit 5d5aa219a790d61cad2c38e1aa32058f16ad2f0b ] For some reason, the driver adding support for Exynos5420 MIPI phy back in 2016 wasn't used on Exynos5420, which caused a kernel panic. Add the proper compatible for it. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20230121201844.46872-2-markuss.broks@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: OMAP2+: omap4-common: Fix refcount leak bugLiang He
[ Upstream commit 7c32919a378782c95c72bc028b5c30dfe8c11f82 ] In omap4_sram_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Message-Id: <20220628112939.160737-1-windhl@126.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: dts: stm32: Update part number NVMEM description on stm32mp131Patrick Delaunay
[ Upstream commit 366384e495511bea8583e44173629a3012d62db0 ] The STM32MP13x Device Part Number (also named RPN in reference manual) only uses the first 12 bits in OTP4, all the other bit are reserved and they can be different of zero; they must be masked in NVMEM result, so the number of bits must be defined in the nvmem cell description. Fixes: 1da8779c0029 ("ARM: dts: stm32: add STM32MP13 SoCs support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: dts: imx7s: correct iomuxc gpr mux controller cellsPeng Fan
[ Upstream commit 0e3e1946606a2919b1dda9967ab2e1c5af2fedd6 ] Per binding doc reg-mux.yaml, the #mux-control-cells should be 1 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: 94a905a79f2c ("ARM: dts: imx7s: add multiplexer controls") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO referenceSamuel Holland
[ Upstream commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430 ] The property named in the schema is 'enable-gpios', not 'enable-gpio'. This makes no difference at runtime, because the regulator is marked as always-on, but it breaks validation. Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2") Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: imx: Call ida_simple_remove() for ida_simple_getAngus Chen
[ Upstream commit ebeb49f43c8952f12aa20f03f00d7009edc2d1c5 ] The function call ida_simple_get maybe fail,we should deal with it. And if ida_simple_get success ,it need to call ida_simple_remove also. BTW,devm_kasprintf can handle id is zero for consistency. Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver") Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: dts: exynos: correct wr-active property in Exynos3250 RinatoKrzysztof Kozlowski
[ Upstream commit d15d2a617499882971ddb773a583015bf36fa492 ] The property is wr-active: exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato") Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: s3c: fix s3c64xx_set_timer_source prototypeArnd Bergmann
[ Upstream commit 5bf52f5e4d12b8109f348cab60cb7d51092c4270 ] The prototype does not match the definition, as gcc-13 points out: arch/arm/mach-s3c/s3c64xx.c:169:13: error: conflicting types for 's3c64xx_set_timer_source' due to enum/integer mismatch; have 'void(unsigned int, unsigned int)' [-Werror=enum-int-mismatch] 169 | void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source) | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/arm/mach-s3c/s3c64xx.c:50: arch/arm/mach-s3c/s3c64xx.h:62:20: note: previous declaration of 's3c64xx_set_timer_source' with type 'void(enum s3c64xx_timer_mode, enum s3c64xx_timer_mode)' 62 | extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event, | ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 4280506ac9bb ("ARM: SAMSUNG: Move all platforms to new clocksource driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230118090224.2162863-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: bcm2835_defconfig: Enable the framebufferStefan Wahren
[ Upstream commit afc8dd99840b7fb7190e769a893cda673bc3a907 ] Booting Linux on a Raspberry Pi based on bcm2835_defconfig there is no display activity. Enable CONFIG_FB which is nowadays required for CONFIG_FB_SIMPLE and CONFIG_FRAMEBUFFER_CONSOLE. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20230113205842.17051-1-stefan.wahren@i2se.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()Yang Yingliang
[ Upstream commit 0414a100d6ab32721efa70ab55524540fdfe0ede ] If platform_device_add() is not called or failed, it should call platform_device_put() in error case. Fixes: 97933d6ced60 ("ARM: OMAP1: dmtimer: conversion to platform devices") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Message-Id: <20220701094602.2365099-1-yangyingliang@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: zynq: Fix refcount leak in zynq_early_slcr_initQiheng Lin
[ Upstream commit 9eedb910a3be0005b88c696a8552c0d4c9937cd4 ] of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on error path. Add missing of_node_put() to avoid refcount leak. Fixes: 3329659df030 ("ARM: zynq: Simplify SLCR initialization") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20221129140544.41293-1-linqiheng@huawei.com Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ARM: OMAP2+: Fix memory leak in realtime_counter_init()Chen Hui
[ Upstream commit ed8167cbf65c2b6ff6faeb0f96ded4d6d581e1ac ] The "sys_clk" resource is malloced by clk_get(), it is not released when the function return. Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter.") Signed-off-by: Chen Hui <judy.chenhui@huawei.com> Message-Id: <20221108141917.46796-1-judy.chenhui@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-03ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 portDmitry Torokhov
[ Upstream commit 4722dd4029c63f10414ffd8d3ffdd6c748391cd7 ] According to c8sectpfe driver code we first drive reset line low and then high to reset the port, therefore the reset line is supposed to be annotated as "active low". This will be important when we convert the driver to gpiod API. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-03ARM: dts: rockchip: add power-domains property to dp node on rk3288Johan Jonker
[ Upstream commit 80422339a75088322b4d3884bd12fa0fe5d11050 ] The clocks in the Rockchip rk3288 DisplayPort node are included in the power-domain@RK3288_PD_VIO logic, but the power-domains property in the dp node is missing, so fix it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/dab85bfb-9f55-86a1-5cd5-7388c43e0ec5@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09ARM: dts: imx7d-smegw01: Fix USB host over-current polarityFabio Estevam
commit 1febf88ef907b142fdde34f7c64ed3535d9339e4 upstream. Currently, when resetting the USB modem via AT commands, the modem is no longer re-connected. This problem is caused by the incorrect description of the USB_OTG2_OC pad. It should have pull-up enabled, hysteresis enabled and the property 'over-current-active-low' should be passed. With this change, the USB modem can be successfully re-connected after a reset. Cc: stable@vger.kernel.org Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06ARM: omap1: fix building gpio15xxArnd Bergmann
[ Upstream commit 9d46ce57f4d1c626bb48170226ea5e35deb5877c ] In some randconfig builds, the asm/irq.h header is not included in gpio15xx.c, so add an explicit include to avoid a build fialure: In file included from arch/arm/mach-omap1/gpio15xx.c:15: arch/arm/mach-omap1/irqs.h:99:34: error: 'NR_IRQS_LEGACY' undeclared here (not in a function) 99 | #define IH2_BASE (NR_IRQS_LEGACY + 32) | ^~~~~~~~~~~~~~ arch/arm/mach-omap1/irqs.h:105:38: note: in expansion of macro 'IH2_BASE' 105 | #define INT_MPUIO (5 + IH2_BASE) | ^~~~~~~~ arch/arm/mach-omap1/gpio15xx.c:28:27: note: in expansion of macro 'INT_MPUIO' 28 | .start = INT_MPUIO, | ^~~~~~~~~ Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06ARM: dts: vf610: Fix pca9548 i2c-mux node namesGeert Uytterhoeven
[ Upstream commit 42825d1f269355d63554ab3c3762611e4d8053e9 ] "make dtbs_check": arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected) From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06ARM: dts: imx: Fix pca9547 i2c-mux node nameGeert Uytterhoeven
[ Upstream commit f78985f9f58380eec37f82c8a2c765aa7670fc29 ] "make dtbs_check": arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignmentGiulio Benetti
commit a4e03921c1bb118e6718e0a3b0322a2c13ed172b upstream. zero_page is a void* pointer but memblock_alloc() returns phys_addr_t type so this generates a warning while using clang and with -Wint-error enabled that becomes and error. So let's cast the return of memblock_alloc() to (void *). Cc: <stable@vger.kernel.org> # 4.14.x + Fixes: 340a982825f7 ("ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation") Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-01ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1lPatrice Chotard
[ Upstream commit 175281f80695569c7f9cf062e5d0ddc4addc109f ] Chip select pinctrl phandle was missing in several stm32mp15x based boards. Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argonPatrice Chotard
[ Upstream commit 732dbcf52f74b254a7ddd4226e0b9638e1e7aeff ] Chip select pinctrl phandle was missing in several stm32mp15x based boards. Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Reinhold Mueller <reinhold.mueller@emtrion.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-somPatrice Chotard
[ Upstream commit 21d83512bf2bd25ebed467151fd2bcd0cca7dc9a ] Chip select pinctrl phandle was missing in several stm32mp15x based boards. Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-somPatrice Chotard
[ Upstream commit 7ffd2266bd32d9f31a4e918443c733906cff0d19 ] Chip select pinctrl phandle was missing in several stm32mp15x based boards. Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60Claudiu Beznea
[ Upstream commit 9bfa2544dbd1133f0b0af4e967de3bb9c1e3a497 ] The 2nd DDR clock for sam9x60 DDR controller is peripheral clock with id 49. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221208115241.36312-1-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: imx: add missing of_node_put()Dario Binacchi
[ Upstream commit 87b30c4b0efb6a194a7b8eac2568a3da520d905f ] Calling of_find_compatible_node() returns a node pointer with refcount incremented. Use of_node_put() on it when done. The patch fixes the same problem on different i.MX platforms. Fixes: 8b88f7ef31dde ("ARM: mx25: Retrieve IIM base from dt") Fixes: 94b2bec1b0e05 ("ARM: imx27: Retrieve the SYSCTRL base address from devicetree") Fixes: 3172225d45bd9 ("ARM: imx31: Retrieve the IIM base address from devicetree") Fixes: f68ea682d1da7 ("ARM: imx35: Retrieve the IIM base address from devicetree") Fixes: ee18a7154ee08 ("ARM: imx5: retrieve iim base from device tree") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'Fabio Estevam
[ Upstream commit 9dfbc72256b5de608ad10989bcbafdbbd1ac8d4e ] The following build warning is seen when running: make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml The imx6qdl-gw560x board does not expose the UART RTS and CTS as native UART pins, so 'uart-has-rtscts' should not be used. Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination detected by serial.yaml. Fix the problem by removing the incorrect 'uart-has-rtscts' property. Fixes: b8a559feffb2 ("ARM: dts: imx: add Gateworks Ventana GW5600 support") Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01ARM: dts: imx7d-pico: Use 'clock-frequency'Fabio Estevam
[ Upstream commit f4dd0845c4f1f5371f1e06fef0e4a1734a2db964 ] 'clock_frequency' is not a valid property. Use the correct 'clock-frequency' instead. Fixes: 8b646cfb84c3 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard") Fixes: 6418fd92417f ("ARM: dts: imx7d-pico: Add support for the nymph baseboard") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 23:18:57 +0000