aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-12-01Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
2009-11-27RTC: let Dove soc select the rtc-mv driver.Saeed Bishara
Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27ARM: Add Tauros2 L2 cache controller supportLennert Buytenhek
Support for the Tauros2 L2 cache controller as used with the PJ1 and PJ4 CPUs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27ARM: add base support for Marvell Dove SoCSaeed Bishara
The Marvell Dove (88AP510) is a high-performance, highly integrated, low power SoC with high-end ARM-compatible processor (known as PJ4), graphics processing unit, high-definition video decoding acceleration hardware, and a broad range of peripherals. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-26ARM: fix "offest" -> "offset" typoUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-24Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2009-11-24mxc: mx1/mx2 DMA: add a possibility to create an endless DMA transferSascha Hauer
This is useful for audio where we do not want to setup a new scatterlist after playing 4GB of audio data. This would cause skips in the playback. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24i.MX31 clock: rename SSI clocks to driver nameSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24mxc: iomux v3: remove resource handlingSascha Hauer
The current model does not allow to put a pad into different modes once a pins is allocated. Remove the resource handling. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24mx3: Add SSI pins to iomux tableSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24mx31moboard: support for usbh1 and usbh2Valentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24mx31moboard: SPI correctionsValentin Longchamp
Adds requirement for ADC on mc13783 and moves the spidev declaration to marxbot file. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-24mx31: pins used for mx31moboard USBValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-23ARM: Clean up linker script using new linker script macros.Nelson Elhage
This patch is mostly a straightforward translation. The primary side effect to the resulting vmlinux should be to increase the alignment on the initramfs to the standard PAGE_SIZE from 32 bytes. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23ARM: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott
This has the consequence of changing the section name used for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. The .text.head output section is eliminated and the head text code is included at the start of the .init output section. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23ARM: MX3: fix CPU revision number detectionDaniel Mack
The macro mx31_revision() used to take the global variable system_rev to determine the CPU revision number. However, this number is expected to be set by the bootloader and is usually zero (at least on my MX31 based boards here). More than that, it is usually taken to identify the board's revision, not the CPU's. Fix that by reading the the CPU's SREV register instead. Right now, mx31_read_cpu_rev() is called from mx31_clocks_init() which is admittedly not a good place for it. However, we need to enable the IIM clock first, and the clock code also has conditional code that depends on mx31_revision() returning the right thing. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-23ARM: MX3: lilly1131: move MC13783 device registrationDaniel Mack
Register the MC13783 device in the module code. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-20Merge branch 'next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop into devel-stable
2009-11-20Merge branch 'for-rmk' of git://github.com/at91linux/linux-2.6-at91 into ↵Russell King
devel-stable Conflicts: arch/arm/mach-at91/Kconfig
2009-11-20[ARM] kmap: fix build errors with DEBUG_HIGHMEM enabledRussell King
d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to always be defined. Solve this by providing invalid definitions for these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-19ARM: MX3: add NOR flash support via physmap mtd driverDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19ARM: MX3: add support for GPIO LEDs on litekit dbDaniel Mack
The names are chosen to match the silkscreen. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19ARM: MX3: add USB functions for mx31litekitDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19ARM: MX3: add SPI devices for mx31liteDaniel Mack
Some header files were reordered while I was at it. The only device currently registered is the ATLAS PMIC (MC13783) chip. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19ARM: MX3: add MMC/SDHC support to mx31lite-db.cDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19ARM: MX3: modularize 'mx31lite' codeDaniel Mack
This commit splits the support code for LogicPD's mx31lite hardware into module and board specific parts. This introduces a new mandatory coreparam called 'mx31lite_baseboard' which specifies the base board support to use. For now, only the LiteKit development board is supported, and developers of own boards are encouraged to use that as reference. The UART support moved to the board code. Some comments were amended along the way. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: cs should be positive in gpmc_cs_free() omap: fix unlikely(x) < y omap3: clock: Fixed dpll3_m2x2 rate calculation omap3: clock: Fix the DPLL freqsel computations omap: Fix keymap for zoom2 according to matrix keypad framwork
2009-11-18OMAP: cs should be positive in gpmc_cs_free()Roel Kluin
The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18omap: fix unlikely(x) < yRoel Kluin
The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18imx: copy constants from mx3x.h to mx35.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx3x.h to mx31.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx2x.h to mx27.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx2x.h to mx21.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reformat mx25.h to match the other platform includesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx35.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx31.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx3x.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx27.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx21.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx2x.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx3x.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx27.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx21.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx2x.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-17omap3: clock: Fixed dpll3_m2x2 rate calculationTero Kristo
Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak
Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-16omap: Fix keymap for zoom2 according to matrix keypad framworkVimal Singh
Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-16Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-17[ARM] pxa: ensure mfp is in correct range in mfp_{read,write}Roel Kluin
Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>