| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull SOFTIRQ_ON_OWN_STACK rework from Arnd Bergmann:
"Just one fixup patch, reworking the softirq_on_own_stack logic for
preempt-rt kernels as discussed in
https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/"
* tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.
|
|
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.
Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.
Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.0
It contains:
- fixes for self-refresh on SAMA7G5 while in AT91 power management modes:
one disabling a DDR PHY controller DLL which has been proved to be buggy
and can introduce glitches that can cause unexpected behavior; one
fixing the DDR PHY recalibration which cannot work for all possible
cases (due to hardware bug) while using backup and self-refresh AT91
power management mode;
- one defconfig fix to remove CONFIG_MICROCHIP_PIT64B from all AT91
defconfigs;
- multiple device tree fixes for regulators to avoid having some of them
enabled all the time and to describe min and max output ranges
according to board capabilities.
* tag 'at91-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
Link: https://lore.kernel.org/r/20220902085744.4193554-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.0, please pull the following:
- William fixes a number of the recently submitted DTS files for 63178,
6846, 6878 to have correct PSCI node propertie as well as correct timer
CPU masks
* tag 'arm-soc/for-6.0/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcmbca: bcm6878: cosmetic change
ARM: dts: bcmbca: bcm6878: fix timer node cpu mask flag
ARM: dts: bcmbca: bcm6846: fix interrupt controller node
ARM: dts: bcmbca: bcm6846: clean up psci node
ARM: dts: bcmbca: bcm6846: fix timer node cpu mask flag
ARM: dts: bcmbca: bcm63178: cosmetic change
ARM: dts: bcmbca: bcm63178: fix interrupt controller node
ARM: dts: bcmbca: bcm63178: clean up psci node
ARM: dts: bcmbca: bcm63178: fix timer node cpu mask flag
Link: https://lore.kernel.org/r/20220829225103.753223-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
VDD_OTHER is not connected to any on board consumer thus it is not
needed to keep it enabled all the time.
Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com
|
|
ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus
don't keep it enabled all the time.
Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.com
|
|
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
|
|
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.com
|
|
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.com
|
|
On SAMA7G5, when resuming from backup and self-refresh, the bootloader
performs DDR PHY recalibration by restoring the value of ZQ0SR0 (stored
in RAM by Linux before going to backup and self-refresh). It has been
discovered that the current procedure doesn't work for all possible values
that might go to ZQ0SR0 due to hardware bug. The workaround to this is to
avoid storing some values in ZQ0SR0. Thus Linux will read the ZQ0SR0
register and cache its value in RAM after processing it (using
modified_gray_code array). The bootloader will restore the processed value.
Fixes: d2d4716d8384 ("ARM: at91: pm: save ddr phy calibration data to securam")
Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-4-claudiu.beznea@microchip.com
|
|
It has been discovered that on some parts, from time to time, self-refresh
procedure doesn't work as expected. Debugging and investigating it proved
that disabling AC DLL introduce glitches in RAM controllers which
leads to unexpected behavior. This is confirmed as a hardware bug. DLL
bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs
disabled. This introduce 6mA extra current consumption on VDDCORE when
switching to any ULP mode or standby mode but the self-refresh procedure
still works.
Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-3-claudiu.beznea@microchip.com
|
|
Since commit f611af4c3bfa ("ARM: at91: Kconfig: implement PIT64B selection")
there is no need to explicitly select PIT64B.
Fixes: f611af4c3bfa ("ARM: at91: Kconfig: implement PIT64B selection")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-2-claudiu.beznea@microchip.com
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220318103729.157574-26-Julia.Lawall@inria.fr
Link: https://lore.kernel.org/r/20220826112153.438829-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/fixes
These are some Versatile family DTS fixes, fixing some
node names and clock names related to SPI.
* tag 'versatile-dts-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: versatile: Update spi clock-names property
ARM: dts: realview: Update spi clock-names property
ARM: dts: integratorap: Update spi node properties
Link: https://lore.kernel.org/r/CACRpkdZfTe8NSGR2ZCkn-1JcNobjfWeXqajSqcJMp8+WtY+2Xw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Drop the "winbond,w25q16dw" compatible since it causes to set the
MODALIAS to w25q16dw which is not specified within spi-nor id table.
Fix this by use the common "jedec,spi-nor" compatible.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulator node 'regulator-3p3v-s0' was dupplicated. Remove it to
clean the DTS.
Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This naming error slipped through, so now that a new backlight node has
been added with correct spelling, fix this one also.
Fixes: 98efa526a0c4 ("ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led node")
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Now that spi pl022 binding only accept "sspclk" as clock name, versatile
platform with "SSPCLK" clock name start raising dtbs_check warnings.
Make necessary changes to update this property in order to make it
compliant with binding.
clock-names:0: 'sspclk' was expected
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-4-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Now that spi pl022 binding only accept "sspclk" as clock name, realview
platforms with "SSPCLK" clock name start raising dtbs_check warnings.
Make necessary changes to update this property in order to make it
compliant with binding.
clock-names:0: 'sspclk' was expected
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-3-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
As per spi pl022 binding, SPI clock name is "sspclk" and not "spiclk".
Fix it.
Also update ssp node name to enable spi bindings check.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-2-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add new line between dts node.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194754.29492-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to two cpus for BCM6878 dual core SoC.
Fixes: 6bcad714e173 ("ARM: dts: Add DTS files for bcmbca SoC BCM6878")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194754.29492-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add the missing gic registers and interrupts property to the gic node.
Fixes: de1a99ac0b64 ("ARM: dts: Add DTS files for bcmbca SoC BCM6846")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194647.29437-3-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Remove unnecessary cpu_on and cpu_off properties from psci
node as they are only needed for psci version prior to 0.2.
Fixes: de1a99ac0b64 ("ARM: dts: Add DTS files for bcmbca SoC BCM6846")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194647.29437-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to two cpus for BCM6846 dual core SoC.
Fixes: de1a99ac0b64 ("ARM: dts: Add DTS files for bcmbca SoC BCM6846")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194647.29437-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add new line between dts node.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-4-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add the missing gic registers and interrupts property to the gic node.
Fixes: fc85b7e64acb ("ARM: dts: add dts files for bcmbca soc 63178")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-3-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Remove unnecessary cpu_on and cpu_off properties from psci
node as they are only needed for psci version prior to 0.2.
Fixes: fc85b7e64acb ("ARM: dts: add dts files for bcmbca soc 63178")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to three cpus for BCM63178 triple core SoC.
Fixes: fc85b7e64acb ("ARM: dts: add dts files for bcmbca soc 63178")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some Arm DT files,
patched by the maintainers.
Other than that it is business as usual.
Core changes:
- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).
New drivers:
- Intel Meteor Lake support.
- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).
- AXP209 variants AXP221, AXP223 and AXP809.
- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.
- Allwinner D1.
Improvements:
- Proper pin multiplexing in the AMD driver.
- Mediatek MT8192 can use generic drive strength and pin bias, then
fixes on top plus some I2C pin group fixes.
- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.
- Handle Qualcomm SC7280 ADSP.
- Handle Qualcomm MSM8916 CAMSS GP clock muxing.
- High impedance bias on ZynqMP.
- Serialize StarFive access to MMIO.
- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"
* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
pinctrl: qcom: sm8250: Fix PDC map
pinctrl: amd: Fix an unused variable
dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
dt-bindings: pinctrl: mt8186: Add gpio-line-names property
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
pinctrl: amd: Use unicode for debugfs output
pinctrl: amd: Fix newline declaration in debugfs output
pinctrl: at91: Fix typo 'the the' in comment
dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
pinctrl: mvebu: Missing a blank line after declarations.
pinctrl: qcom: Add SM6375 TLMM driver
dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
pinctrl: imx93: Add MODULE_DEVICE_TABLE()
pinctrl: sunxi: Add driver for Allwinner D1
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Refactor register/offset calculation
...
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change maintainer email address
- Use acpi_dev_for_each_child() helper to walk the ACPI list
New Device Support:
- BCM2711 RPiVid ASB in Broadcom BCM2835
- MT8195 dual-core RISC-V MCU in Chrome OS Embedded Controller
- Regulator, RTC and Keys in MediaTek MT6357 PMIC
- GPIO in X-Powers AXP20x PMIC
- MT6331 and MT6332 in MediaTek MT6357 PMIC
- Intel Meteor Lake-P PCI in Intel LPSS PCI
New Functionality:
- Add support for non-ACPI platforms; lpc_ich
Fix-ups:
- Use platform data instead of hard-coded values; bcm2835-pm
- Make use of BIT/GENMASK macros; intel_soc_pmic_bxtwc
- Use dev_err_probe() helper; intel_soc_pmic_chtwc,
intel_soc_pmic_bxtwc
- Use provided generic APIs / helpers; lpc_ich
- Clean-up .remove() return values; asic3, t7l66xb, tc6387xb,
tc6393xb
- Use correct formatting specifiers; syscon
- Replace sprintf() with sysfs_emit(); intel_soc_pmic_bxtwc
- Automatically detect and fill USB endpoint pointers; dln2
- Use more appropriate dev/platform/spi resources APIs;
intel_soc_pmic_bxtwc
- Make use of pm_sleep_ptr(); intel_soc_pmic_chtwc,
intel_soc_pmic_bxtwc
- Improve error handling; intel_soc_pmic_bxtwc
- Use core driver API to create groups; intel_soc_pmic_bxtwc
- Kconfig fix-ups; MFD_SUN6I_PRCM
- Admin: whitespace/email addresses/etc; max77714, db8500-prcmu,
ipaq-micro, intel_soc_pmic_bxtwc
- Remove duplicate/unused code/functionality; lpc_ich, twl-core,
qcom-pm8008, intel_soc_pmic_bxtwc
- DT fix-ups / conversions; da9063, ti,j721e-system-controller,
st,stm32-timers, mt6397, qcom,tcsr, mps,mp2629, qcom-pm8xxx,
fsl,imx8qxp-csr
Bug Fixes:
- Fix of_node reference leak; max77620"
* tag 'mfd-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'
dt-bindings: mfd: st,stm32-timers: Correct 'resets' property name
dt-bindings: mfd: syscon: Update Lee Jones' email address
MAINTAINERS: Use Lee Jones' kernel.org address for Syscon submissions
MAINTAINERS: Use Lee Jones' kernel.org address for MFD submissions
mfd: sun6i-prcm: Update Kconfig description
mfd: intel_soc_pmic_bxtwc: Fix spelling in the comment
mfd: intel_soc_pmic_bxtwc: Drop unneeded casting
mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf()
mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masks
mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR()
mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct device
mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()
mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()
mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facility
mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()
mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDs
mfd: mt6397: Add basic support for MT6331+MT6332 PMIC
mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These updates came in after I had already tagged the branches, but
they still seem appropriate for 6.0 and most of them were part of
linux-next through other trees.
- The reset controller tree adds one new driver for the TI TPS380x
power management chip and a few minor changes in other drivers
- Apple M1 now has a DT entry for the NVMe controller after the
driver was merged, and has a new mailing list in the MAINTAINERS
file.
- Fixes for USB on the Socionext Uniphier platforms and the network
controller on Intel Cyclone5"
* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
arm64: dts: apple: t8103: Add ANS2 NVMe nodes
reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
reset: tps380x: Add TPS380x device driver supprt
dt-bindings: reset: Add TPS380x documentation
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
ARM: dts: add EMAC AXI settings for Cyclone5
reset: reset-simple should depends on HAS_IOMEM
Revert "reset: microchip-sparx5: allow building as a module"
reset: a10sr: allow building under COMPILE_TEST
reset: allow building of reset simple driver if expert config selected
reset: microchip-sparx5: allow building as a module
arm64: dts: apple: Re-parent ANS2 power domains
MAINTAINERS: add ARM/APPLE MACHINE mailing list
|
|
Two bugfixes that came in to update the MAINTAINERS file
and fix an issue with USB on the uniphier platform.
* arm/fixes:
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
MAINTAINERS: add ARM/APPLE MACHINE mailing list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
|
Pull ARM updates from Russell King:
"Not much this time around, the 5.20-rc1 development updates for arm
are:
- add KASAN support for vmalloc space on arm
- some sparse fixes from Ben Dooks
- rework amba device handling (so device addition isn't deferred)"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9220/1: amba: Remove deferred device addition
ARM: 9219/1: fix undeclared soft_restart
ARM: 9218/1: dma-mapping: fix pointer/integer warning
ARM: 9217/1: add definition of arch_irq_work_raise()
ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series fine tuning virtio support for Xen guests, including removal
the now again unused "platform_has()" feature.
- a fix for host admin triggered reboot of Xen guests
- a simple spelling fix
* tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't require virtio with grants for non-PV guests
kernel: remove platform_has() infrastructure
virtio: replace restricted mem access flag with callback
xen: Fix spelling mistake
xen/manage: Use orderly_reboot() to reboot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull efivars sysfs interface removal from Ard Biesheuvel:
"Remove the obsolete 'efivars' sysfs based interface to the EFI
variable store, now that all users have moved to the efivarfs pseudo
file system, which was created ~10 years ago to address some
fundamental shortcomings in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel"
* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: vars: Move efivar caching layer into efivarfs
efi: vars: Switch to new wrapper layer
efi: vars: Remove deprecated 'efivars' sysfs interface
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business
logic' part of it into efivarfs
- Enable ACPI PRM on arm64
* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
ACPI: Move PRM config option under the main ACPI config
ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
ACPI: PRM: Change handler_addr type to void pointer
efi: Simplify arch_efi_call_virt() macro
drivers: fix typo in firmware/efi/memmap.c
efi: vars: Drop __efivar_entry_iter() helper which is no longer used
efi: vars: Use locking version to iterate over efivars linked lists
efi: pstore: Omit efivars caching EFI varstore access layer
efi: vars: Add thin wrapper around EFI get/set variable interface
efi: vars: Don't drop lock in the middle of efivar_init()
pstore: Add priv field to pstore_record for backend specific use
Input: applespi - avoid efivars API and invoke EFI services directly
selftests/kexec: remove broken EFI_VARS secure boot fallback check
brcmfmac: Switch to appropriate helper to load EFI variable contents
iwlwifi: Switch to proper EFI variable store interface
media: atomisp_gmin_platform: stop abusing efivar API
efi: efibc: avoid efivar API for setting variables
efi: avoid efivars layer when loading SSDTs from variables
efi: Correct comment on efi_memmap_alloc
memblock: Disable mirror feature if kernelcore is not specified
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Though there's been a decent amount of RNG-related development during
this last cycle, not all of it is coming through this tree, as this
cycle saw a shift toward tackling early boot time seeding issues,
which took place in other trees as well.
Here's a summary of the various patches:
- The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot
option have been removed, as they overlapped with the more widely
supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and
"random.trust_cpu". This change allowed simplifying a bit of arch
code.
- x86's RDRAND boot time test has been made a bit more robust, with
RDRAND disabled if it's clearly producing bogus results. This would
be a tip.git commit, technically, but I took it through random.git
to avoid a large merge conflict.
- The RNG has long since mixed in a timestamp very early in boot, on
the premise that a computer that does the same things, but does so
starting at different points in wall time, could be made to still
produce a different RNG state. Unfortunately, the clock isn't set
early in boot on all systems, so now we mix in that timestamp when
the time is actually set.
- User Mode Linux now uses the host OS's getrandom() syscall to
generate a bootloader RNG seed and later on treats getrandom() as
the platform's RDRAND-like faculty.
- The arch_get_random_{seed_,}_long() family of functions is now
arch_get_random_{seed_,}_longs(), which enables certain platforms,
such as s390, to exploit considerable performance advantages from
requesting multiple CPU random numbers at once, while at the same
time compiling down to the same code as before on platforms like
x86.
- A small cleanup changing a cmpxchg() into a try_cmpxchg(), from
Uros.
- A comment spelling fix"
More info about other random number changes that come in through various
architecture trees in the full commentary in the pull request:
https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/
* tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: correct spelling of "overwrites"
random: handle archrandom with multiple longs
um: seed rng using host OS rng
random: use try_cmpxchg in _credit_init_bits
timekeeping: contribute wall clock to rng on time change
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
random: remove CONFIG_ARCH_RANDOM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM boardfile deprecation from Arnd Bergmann:
"Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile for
booting were grandfathered in, with about half of them either removed
or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files
as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files"
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
ARM: iop32x: mark as unused
ARM: s3c: mark most board files as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: sa1100: mark most boards as unused
ARM: footbridge: mark cats board for removal
ARM: mmp: mark all board files for removal
ARM: ep93xx: mark most board files as unused
ARM: davinci: mark all ATAGS board files as unused
ARM: orion: add ATAGS dependencies
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: add ATAGS dependencies to non-DT platforms
|
