aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf548
AgeCommit message (Collapse)Author
2012-05-21blackfin: twi: Move TWI peripheral pin request array to platform dataSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: rotary: Add pm_wakeup flag to platform data structure.Sonic Zhang
Rotary can't be used as a wakeup source in all platform. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: license: Change ADI BSD licenseSonic Zhang
Change ADI BSD license to standart 3 clause BSD license for some blackfin arch code requested by ADI Legal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: twi: move twi bit mask macro to twi head fileSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21bf548: add ppi interrupt mask and blanking clocksScott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: bf548: add capture supportScott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: config: update macro SPI_BFIN in board fileSonic Zhang
Macro name for spi controller driver has been modified, so update default board file accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-07-23Blackfin: gpio/ints: generalize pint logicMike Frysinger
Have the logic that uses peripheral interrupt blocks key off of pint defines rather than CPU names so that things are generalized across families. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: bf54x: tweak MMR pint namesMike Frysinger
The hardware block uses the name "request" rather than "irq", so update the struct accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: update anomaly lists to latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger
The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28Blackfin: bf52x/bf54x: fix up usb MMR definesMike Frysinger
The bf52x/bf54x have the incorrect addresses for USB_EP_NI7_RXINTERVAL and USB_EP_NI7_TXCOUNT, so adjust those. Further, the bf54x header puts the USB defines in the wrong place, so shuffle them back to the right grouping. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28Blackfin: mach/bfin_serial_5xx.h: punt now-unused headerMike Frysinger
Now that the serial code has been unified in bfin_serial.h, and the Blackfin UART driver pushed its resources to the boards files, we don't need these headers anymore. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: boards: update ASoC resources after machine driver overhaulScott Jiang
Now that the Blackfin machine drivers have been updated to the multicomponent support, update the resources to match. The pin settings are now a board issue and removed from the driver. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layoutMike Frysinger
Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now that Das U-Boot uses the last small sector for its environment, update their nor layout in the kernel accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: update anomaly lists to latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up style in irq definesMike Frysinger
These files had a lot of whitespace damage, mostly due to copying and pasting original files that had damage. The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so punt them all. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: unify core IRQ definitionsMike Frysinger
Start a new common IRQ header and move all of the CEC pieces there. This lets the individual part headers worry just about its SIC defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22Blackfin: bf54x: re-enable anomaly 05000353 for all revsMike Frysinger
Even though the anomaly sheet says that the the bootrom is fixed, tests have shown that the fix itself does not handle all cases. So until we get a ROM update, assume the reset code is still broken and we need to handle things ourselves. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: punt unused HDMA masksMike Frysinger
No code uses these, and the short define names are polluting the global namespace where they collide with things like common irq files. So just punt the damned things. If in the future we need HDMA support, we can make a standalone header for these things. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: bf548-ezkit: add CAN1 supportAaron Wu
Signed-off-by: Aaron Wu <aaronwu06@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: bf54x: add kconfig for UART2/3 DMA channel assignmentssteven miao
The BF54x lacks dedicated DMA channels for the UART peripherals and need to be muxed between others. So add a kconfig option so people can select which channels the UARTs will use so they can pick between SPORTs and the less commonly used EPPI/PIXC peripherals. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: boards: add missing "static" to peripheral listsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: sport_uart resources: remove unused secondary RX/TX pinsSonic Zhang
The SPORT/UART driver doesn't use the secondary channel pins, so don't try and request them thus keeping other drivers from using them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf54x: add MMR layout for PINTMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: unify pll.h headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: drop asm/irq.h include from mach headersMike Frysinger
These were only included because of the irq handling of the PLL funcs, and those PLL funcs have been moved out into their own header now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: clean up mach header includesMike Frysinger
The main asm/blackfin.h header will pull in mach/blackfin.h to get all the fun Blackfin defines. So having any of the sub-mach headers trying to include asm/blackfin.h makes no sense -- punt it. The mach/blackfin.h header takes care of including the part-specific def headers which in turn will include any other needed def file. Similarly, it takes care of pulling in the part-specific cdef header. So move this logic out of the blackfin.h when necessary. Further, make sure the cdef headers do not waste time including the def headers again. Since all parts need the common def/cdef headers, move this logic out of the part-specific headers and into the mach/blackfin.h file. Finally, we need to split the BF539 def header since the BF538 does not have MXVR and we don't want to expose those MMRs. So now all parts should have the same behavior: mach/blackfin.h asm/def_LPBlackfin.h part-specific def.h if ! asm asm/cdef_LPBlackfin.h part-specific cdef.h And the sub def/cdef headers only tail into what they need. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: push gpio (port) defines into common headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf54x: drop unused legacy MMR namesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: dma: constify MMR pointer arrayMike Frysinger
The array of pointers is never written, so constify it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: standardize DMAC traffic control MMRs & MDMA MMRsMike Frysinger
Use the same naming convention for DMA traffic MMRs (most were legacy anyways) so we can avoid useless ifdef trees. Same goes for MDMA names -- this actually allows us to undo a bunch of ifdef redirects that existed for this purpose alone. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bfin_serial.h: unify heavily duplicated serial codeMike Frysinger
Each Blackfin port has been duplicating UART structures and defines when there really is no need for it. So start a new bfin_serial.h header to unify all these pieces and give ourselves a fresh start. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: musb-boards: push clkin value to platform resourcesBob Liu
In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-10usb: musb: split blackfin to its own platform_driverFelipe Balbi
Just adding its own platform_driver, not really using it yet. Later patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: trivial search and replace patchFelipe Balbi
change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01usb: musb: add names for IRQs in structure resourceHema Kalliguddi
Soon resource data will get automatically populated from a set of autogenerated data from TI's hardware database for the OMAP platform. Such database, might not have resources at the expected order by the current drivers. While we could hack in some exceptions to that tool to generate resources in a specific order, it seems less fragile to use the resource name instead. That way, no matter what order the resources are generated, the driver still work. Modified the OMAP, Blackfin and Davinci architecture files to add the name of the IRQs in the resource structures and musb driver to use the platform_get_irq_byname() api to get the device and dma irq numbers instead of using the index. Cc: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22Blackfin: bf54x: add missing SIC_RVECT definitionMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQMike Frysinger
Reported-by: D Binderman <dcb314@hotmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf548-ezkit: increase u-boot partition sizeMike Frysinger
The BF54x processor has a ton of on-chip peripherals and in order to support them all, the u-boot image is quite large. So give it 512KiB in all bootable flashes to make our lives easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: add example i2c resources for ad525x devicessteven miao
Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger
The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: cm-bf548: add support for Socket CANMichael Hennerich
Add platform resources for the on-chip CAN peripheral so we can use it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: update AD183x resourcesBarry Song
Make sure we use the right Kconfig names and platform strings. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: punt short SPI MMR bit namesMike Frysinger
Now that the common header defines everything and the SPI drivers are using it, we can drop these duplicated global namespace polluters. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-07Blackfin: Rename IRQ flags handling functionsDavid Howells
Rename h/w IRQ flags handling functions to be in line with what is expected for the irq renaming patch. This renames local_*_hw() to hard_local_*() using the following perl command: perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"` and then fixing up asm/irqflags.h manually. Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both return the flags rather than passing it through the argument list. Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07Blackfin: Split PLL code from mach-specific cdef headersDavid Howells
Split the PLL control code from the Blackfin machine-specific cdef headers so that the irqflags functions can be renamed without incurring a header loop. Signed-off-by: David Howells <dhowells@redhat.com>
2010-08-27Blackfin: bf52x/bf54x boards: drop unused nand page sizeBarry Song
Now that the driver for the Blackfin on-chip NFC no longer uses/respects the page_size from the platform resources (figures out the needs on the fly), drop it from the platform resources. This fixes some build errors since the defines no longer exists. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 09:42:00 +0000