aboutsummaryrefslogtreecommitdiff
path: root/arch/m68k/atari
AgeCommit message (Collapse)Author
2013-04-16m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCDMichael Schmitz
Add platform devices used by the isp116x-hcd driver for EtherNAT and NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip, so its platform device is used to cover the EtherNEC case, too. Register definitions thanks to David Galvez <dgalvez75@gmail.com> [Geert] Conditionalize isp1160_delay() definition Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - add interrupt chip definition for CPLD interruptsMichael Schmitz
Add a dedicated interrupt chip definition for the EtherNAT CPLD interrupts. SMC91C111 and ISP1160 chips have separate interrupts that can be enabled and disabled in a CPLD register at offset 0x23 from the card base. Note the CPLD interrupt control register is mapped on demand, whenever any interrupt enable/disable action is requested. The EtherNAT USB driver still needs interrupts disabled around reset and start actions. In particular, we cannot entirely rely on the irq_startup being called first. The smc91x and isp116x-hcd drivers will use this feature. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNEC - add platform device supportMichael Schmitz
Add platform device for the Atari ROM port ethernet adapter, EtherNEC. This platform device will be used by the ne.c driver. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - platform device and IRQ support codeMichael Schmitz
Add platform device and interrupt definitions necessary for the EtherNAT Ethernet/USB adapter for the Falcon extension port. EtherNAT interrupt numbers are 139/140 so the max. interrupt number for Atari has to be increased. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: use dedicated irq_chip for timer D interruptsMichael Schmitz
Add a special irq_chip for the Atari MFP timer D interrupt, which is used as a polling timer for EtherNEC and NetUSBee Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-22m68k/atari: Change VME irq numbers from unsigned long to unsigned intGeert Uytterhoeven
Device interrupts numbers were changed to unsigned int in 1997, the year IRQ_MACHSPEC was killed as well. Also kill a related cast while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: netdev@vger.kernel.org
2012-03-28Disintegrate asm/system.h for M68KDavid Howells
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2012-01-22m68k: Fix assembler constraint to prevent overeager gcc optimisationAndreas Schwab
Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2011-12-10m68k/atari: Move declaration of atari_SCC_reset_done to header fileGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Remove code and comments about different irq typesGeert Uytterhoeven
This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Add m68k_setup_irq_controller()Geert Uytterhoeven
This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Switch irq_chip methods to "struct irq_data *data"Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_controller to irq_chipGeert Uytterhoeven
Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-31m68k: Add export.h to the m68k specific files as requiredPaul Gortmaker
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-30m68k/atari: Reserve some ST-RAM early on for device buffer useMichael Schmitz
Based on an original patch from Michael Schmitz: Because mem_init() is now called before device init, devices that rely on ST-RAM may find all ST-RAM already allocated to other users by the time device init happens. In particular, a large initrd RAM disk may use up enough of ST-RAM to cause atari_stram_alloc() to resort to __get_dma_pages() allocation. In the current state of Atari memory management, all of RAM is marked DMA capable, so __get_dma_pages() may well return RAM that is not in actual fact DMA capable. Using this for frame buffer or SCSI DMA buffer causes subtle failure. The ST-RAM allocator has been changed to allocate memory from a pool of reserved ST-RAM of configurable size, set aside on ST-RAM init (i.e. before mem_init()). As long as this pool is not exhausted, allocation of real ST-RAM can be guaranteed. Other changes: - Replace the custom allocator in the ST-RAM pool by the existing allocator in the resource subsystem, - Remove mem_init_done and its hook, as memory init is now done before device init, - Remove /proc/stram, as ST-RAM usage now shows up under /proc/iomem, e.g. 005f2000-006f1fff : ST-RAM Pool 005f2000-0063dfff : atafb 0063e000-00641fff : ataflop 00642000-00642fff : SCSI Signed-off-by: Michael Schmitz <schmitz@debian.org> [Andreas Schwab <schwab@linux-m68k.org>: Use memparse()] [Geert: Use the resource subsystem instead of a custom allocator] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Use the correct mouse interrupt hookMichael Schmitz
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k/atari: Do not use "/" in interrupt namesGeert Uytterhoeven
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when trying to add an entry for the interrupt handler to sysfs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-23m68k/atari: Rename "scc" to "atari_scc"Geert Uytterhoeven
It's a way too generic name for a global #define and conflicts with a variable with the same name, causing build errors like: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary | | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary & | make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-22m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12m68k: atari core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-10-23proc: move /proc/stram to m68k-specific codeAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/hardware to m68k-specific codeAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-14m68k: Remove the broken Hades supportAdrian Bunk
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Define rtc_lock on AtariGeert Uytterhoeven
The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove unused atari_kbd_translate()Geert Uytterhoeven
If CONFIG_VT=n, I get: | arch/m68k/atari/built-in.o: In function `atari_kbd_translate': | arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state' Just remove atari_kbd_translate(), as it's unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: use bcd2bin/bin2bcdAdrian Bunk
This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02m68k: atari_keyb_init operator precedence fixMichael Schmitz
Fix operator precedence bug in atari_keyb_init, which caused a failure on CT60 Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k/atari/debug.c: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global functions (always) static: - atari_mfp_console_write() - atari_scc_console_write() - atari_midi_console_write() - atari_init_mfp_port() - atari_init_scc_port() - atari_init_midi_port() - #if 0 the following unused functions: - atari_mfp_console_wait_key() - atari_scc_console_wait_key() - atari_midi_console_wait_key() - remove the following unused variables: - atari_MFP_init_done - atari_SCC_init_done Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18arch: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-02-07Introduce flags for reserve_bootmem()Bernhard Walle
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05m68k: kill arch/m68k/atari/atari_ksyms.cAdrian Bunk
EXPORT_SYMBOL's belong to the actual code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05m68k: Balance ioremap and iounmap in m68k/atari/hades-pci.cRoel Kluin
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-26m68k: export atari_keyb_initAdrian Bunk
m68k: export atari_keyb_init This patch fixes the following build error: .. MODPOST 25 modules ERROR: "atari_keyb_init" [drivers/input/mouse/atarimouse.ko] undefined! ERROR: "atari_keyb_init" [drivers/input/keyboard/atakbd.ko] undefined! make[2]: *** [__modpost] Error 1 Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Atari keyboard: incorporate additional review commentsGeert Uytterhoeven
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13m68k: Atari keyboard ACIA driver cleanupGeert Uytterhoeven
m68k: Atari keyboard ACIA driver cleanup: - removed dead key autorepeat code - removed hardcoded initial keymap Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20m68k: missing exportsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07SPIN_LOCK_UNLOCKED cleanup in arch/m68kMilind Arun Choudhary
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07remove unused header file: arch/m68k/atari/atasound.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: early parameter supportRoman Zippel
Add early parameter support and convert current users to it. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: reformat various m68k filesRoman Zippel
Reformat various m68k files, so they actually look like Linux sources. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Atari keyboard and mouse support.Michael Schmitz
Atari keyboard and mouse support. (reformating and Kconfig fixes by Roman Zippel) Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-09[PATCH] m68k/Atari: 2.6.18 Atari IDE interrupt needs SA_SHIRQMichael Schmitz
Atari IDE: The interrupt needs SA_SHIRQ now to get registered. Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] m68k: replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09[PATCH] m68k/Atari: Interrupt updatesGeert Uytterhoeven
Misc Atari fixes: - initialize correct number of atari irqs - silence vbl interrupt until it's used by atafb - use mdelay() to read clock if necessary Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>