aboutsummaryrefslogtreecommitdiff
path: root/arch/m68knommu/platform
AgeCommit message (Collapse)Author
2009-09-16m68knommu: clean up ColdFire 528x interrupt setupGreg Ungerer
With the common intc-2 interrupt controller code in place the ColdFire 528x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16m68knommu: clean up ColdFire 527x interrupt setupGreg Ungerer
With the common intc-2 interrupt controller code in place the ColdFire 527x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16m68knommu: general interrupt controller for ColdFire many 52xx partsGreg Ungerer
Create general interrupt controller code for the many ColdFire version 2 cores that use the two region INTC interrupt controller. This includes the 523x family, 5270, 5271, 5274, 5275, and the 528x families. This code does proper masking and unmasking of interrupts. With this in place some of the driver hacks in place to support ColdFire interrupts can finally go away. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16m68knommu: remove per device interrupt mask setting for ColdFire 520xGreg Ungerer
With general interrupt controller code in place we don't need specific unmasking code for the internal ColdFire 520x UARTs or ethernet (FEC). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16m68knommu: use general interrupt controller for ColdFire 520x familyGreg Ungerer
Create general interrupt controller code for the ColdFire 520x family, that does proper masking and unmasking of interrupts. With this in place some of the driver hacks in place to support ColdFire interrupts can finally go away. Within the ColdFire family there is a variety of different interrupt controllers in use. Some are used on multiple parts, some on only one. There is quite some differences in some varients, so much so that common code for all ColdFire parts would be impossible. This commit introduces code to support one of the newer interrupt controllers in the ColdFire 5208 and 5207 parts. It has very simple mask and unmask operations, so is one of the easiest to support. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 5407.sfking@fdwdc.com
Add support for the 5407. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 532x.sfking@fdwdc.com
Add support for the 532x. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 5307.sfking@fdwdc.com
Add support for the 5307. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 528x.sfking@fdwdc.com
Add support for the 528x. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 5272.sfking@fdwdc.com
Add support for the 5272. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 527x.sfking@fdwdc.com
Add support for the 5271 & 5275. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 5249.sfking@fdwdc.com
Add support for the 5249. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 523x.sfking@fdwdc.com
Add support for the 523x. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 520x.sfking@fdwdc.com
Add support for the 520x. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldire 5206e.sfking@fdwdc.com
Add support for the 5206e. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10generic GPIO support for the Freescale Coldfire 5206.sfking@fdwdc.com
Add support for the 5206. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10core generic GPIO support for Freescale Coldfire processors.sfking@fdwdc.com
This adds the basic infrastructure used by all of the different Coldfire CPUs. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: remove obsolete reset codeGreg Ungerer
All ColdFire and non-MMU 68k code has custom reset routines. Remove the obsolete and now un-used reset macros. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 5272 ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 528x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 527x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 523x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 520x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 532x ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5249 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5206e ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5206 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5407 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5307 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.Richard Retanubun
This processor only have one FEC and its MDIO pins are located at a different offset than the code used for the current CONFIG_M527x. Tesed on M5271EVB eval platform. Without this patch the FEC driver will report no PHY attached if the bootloader does not pre-initialize the PAR_FECI2C GPIO register. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits) m68knommu: improve compile arch switch settings m68knommu: fix 5407 ColdFire UART vector setup m68knommu: fix 5307 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART setup m68knommu: fix end of uart table marker m68knommu: switch to using generic_handle_irq() m68k: merge the mmu and non-mmu versions of tlbflush.h m68knommu: introduce basic clk infrastructure m68k: merge the mmu and non-mmu versions of module.h m68knommu: add missing interrupt line definition for UART 2 m68k: merge the mmu and non-mmu versions of mmu_context.h m68k: merge the mmu and non-mmu versions of current.h m68k: merge the mmu and non-mmu versions of div64.h m68k: merge the mmu and non-mmu versions of bugs.h m68k: merge the mmu and non-mmu versions of bug.h m68k: use the mmu version of cache.h for m68knommu as well m68k: use the mmu version of bootinfo.h for m68knommu as well m68k: merge the mmu and non-mmu versions of fb.h m68k: merge the mmu and non-mmu versions of segment.h ...
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-24m68knommu: fix 5407 ColdFire UART vector setupGreg Ungerer
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5307 ColdFire UART vector setupGreg Ungerer
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5249 ColdFire UART vector setupGreg Ungerer
The address of the IVUR register is not correct, it should be offset into the MBAR region. Without this the vector is not set to the correct number. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5249 ColdFire UART setupGreg Ungerer
The ICR registers of the 5249 ColdFire processor are 8bits, not 32bits. Fix the read/write of these register to be the correct size. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix end of uart table markerGreg Ungerer
The UART platform data structure is missing an empty struct at the end (as the end of structure marker). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: introduce basic clk infrastructureGreg Ungerer
Create basic support for clk API. Recent changes to the FEC driver (used by many ColdFire family parts) need this. Initially only supports getting the master clock frequency. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-10m68knommu: m528x build fixSteven King
There isn't any mcfqspi.h in the tree, and without it everything inside the #ifdef CONFIG_SPI is uncompilable. Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10m68knommu: m5206e build fixSteven King
Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-26fec: add FEC platform support to ColdFire CPU's setup codeGreg Ungerer
m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27m68knommu: fix 5329 ColdFire periphal addressingMatt Waddel
The 5329 ColdFire peripheral IO register addresses are not relative to the MBAR register. So fix the serial platform setup array and IRQ acking to use just the direct addresses. Signed-off-by: Matt Waddel <Matt.Waddel@freescale.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-27m68knommu: remove obsolete and unused eLIA boardAdrian Bunk
Greg Ungerer said about this board: Only ever a handful where made, and that was in 1999. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-27m68knommu: use one exist from execptionSebastian Siewior
Part of the code that did not make sense to me got removed by Greg. This is part two: The first compare is to check whether the interrupts are disabled or not. Depending on the result we exectute the RESTORE_ALL macro is not only restoring the stack but also returning to caller. The test for pending softirq has been removed because it is allready done in irq_exit(). Since system_call() is allso using the SAVE_ALL macro and returning via ret_from_exception label I see no reason why we could not do this here as well. This is also handy because if we return from the timer interrupt and we need to resched than we check for this :) Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-07-23m68knommu: put ColdFire head code into .text.head sectionGreg Ungerer
Switch the ColdFire head start up code to be in the .text.head segment. And make sure that segment is at the start of the final linked text segment. Fixes the linker warnings about section use mis-matches: WARNING: vmlinux.o(.text+0xa8): Section mismatch in reference from the variable _clear_bss to the function .init.text:start_kernel() The function _clear_bss() references the function __init start_kernel(). This is often because _clear_bss lacks a __init annotation or the annotation of start_kernel is wrong. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS supportSebastian Siewior
The PIT code has been changed in order to suppport GENERIC_CLOCKEVENTS. The priority of the PIT clocksource has been decreased in favor of the DMA timer. pit_cycles_per_jiffy become a constant (PIT_CYCLES_PER_JIFFY) because it is known at compile time and does not change afterwards. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add sched_clock() for the DMA timerSebastian Siewior
with this printk() and other sched_clock() user use the more precise timestamps. The highly optimized math is from arch/x86/kernel/tsc_32.c. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: Add Coldfire DMA Timer supportSebastian Siewior
This one could be used as a hrtimer. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 05:34:38 +0000