aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze/configs
AgeCommit message (Collapse)Author
2020-02-04microblaze: Wire CMA allocatorMichal Simek
Based on commit 04e3543e228f ("microblaze: use the generic dma coherent remap allocator") CMA can be easily enabled by calling dma_contiguous_reserve() at the end of mmu_init(). High limit is end of lowmem space which is completely unused at this point of time. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-02-04microblaze: Sync defconfig with latest Kconfig layoutMichal Simek
Layout was changed by commit 6210b6402f58 ("kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-04microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 driversManish Narani
As EXT4 filesystem driver is used for handling EXT2 file systems as well. There is no need to enable EXT2 driver. This patch disables EXT2 and enables EXT3/EXT4 drivers. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-25microblaze: defconfig: Enable devtmps and tmpfsManjukumar Matha
Currently dropbear does not run in background because devtmps and tmpfs is not enabled by default. Enable devtmps and tmpfs to fix this issue. Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-19microblaze: Switch to standard restart handlerLinus Walleij
The microblaze uses the legacy APIs to dig out a GPIO pin defined in the root of the device tree to issue a hard reset of the platform. Asserting a hard reset should be done using the standard DT-enabled and fully GPIO descriptor aware driver in drivers/power/reset/gpio-restart.c using the bindings from Documentation/devicetree/bindings/power/reset/gpio-restart.txt To achieve this, first make sure microblaze makes use of the standard kernel restart path utilizing do_kernel_restart() from <linux/reboot.h>. Put in some grace time and an emergency print if the restart does not properly assert. As this is basic platform functionality we patch the DTS file and defconfig in one go for a lockstep change. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [ Michal: Move machine_restart back to reset.c ] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-18microblaze: defconfig synchronizationMichal Simek
Kconfig structure has changed that's why make sense to do synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-18microblaze: Enable Xilinx AXI emac driver by defaultMichal Simek
Enable Xilinx AXI emac ethernet driver for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22microblaze: Enabling CONFIG_BRIDGE in mmu_defconfigVineeth Chowdary Karumanchi
This patch enables CONFIG_BRIDGE=m by default to be aligned with Xilinx defaults. Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22microblaze: Enabling CONFIGS related to MTDVineeth Chowdary Karumanchi
Add support for Intel and AMD flash devices by default for mmu configuration. Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-22microblaze: Update defconfigsMichal Simek
Run "make savedefconfig" to bring up to date. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-10KEYS: CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an optionDavid Howells
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now mandatory if the keyrings facility is enabled (it's used by libkeyutils in userspace). The defconfig references were removed with: perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \ `git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y` and the integrity Kconfig fixed by hand. Signed-off-by: David Howells <dhowells@redhat.com> cc: Andreas Ziegler <andreas.ziegler@fau.de> cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2014-06-04microblaze: Enable SERIAL_OF_PLATFORMMichal Simek
SERIAL_OF_PLATFORM is required for getting 8250 to work. Reported-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-26microblaze: Enable KGDB in defconfigMichal Simek
Enable KGDB in defconfig to be sure that support is regularly compiled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Do not select OPT_LIB_ASM by defaultMichal Simek
This option is valid only for BE systems. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-04microblaze: Update microblaze defconfigsMichal Simek
The main reason is 0-day testing system which can directly use these defconfigs for testing. Enable support for all xilinx drivers which Microblaze can use and disable dependency on external rootfs.cpio. There is only one exception which is axi ethernet driver which still uses NO_IRQ which is not defined for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10microblaze: remove obsolete DEBUG_BOOTMEMAmerigo Wang
"git grep" shows this is the last piece of code using DEBUG_BOOTMEM, so remove it. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-14defconfig reductionSam Ravnborg
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-05-06microblaze: Defconfig updateMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-03microblaze: Defconfig updateMichal Simek
There were several changes in Microblaze defconfig that's why is good to update defconfigs. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-24microblaze: Disable heartbeat/enable emaclite in defconfigsMichal Simek
I need to disable heartbeat function because this features breaks testing in Qemu. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-18microblaze: Update Microblaze defconfigsMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26microblaze_mmu_v2: Add mmu_defconfigMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-18microblaze: Update Microblaze defconfigMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: defconfig fileMichal Simek
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 15:55:08 +0000