aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze/kernel
AgeCommit message (Collapse)Author
2012-12-13microblaze: Wire-up new system call kcmpMichal Simek
Wire-up kcmp syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-12-13microblaze: Fix intc_enable_or_unmask functionMichal Simek
Intc_enable_or_unmask() is called at the last stage of handle_level_irq(). This function enables the irq first (Write INTC.SIE) and clear ISR next (Write INTC.IAR). This would create problems that processor will get into a new interrupt as soon as SIE is written because the previous level interrupt has been captured by INTC. If the description bring some puzzles, here is the details of how interrupt is handled for MicroBlaze after Interrupt signal is detected: 1. disable INTC (INTC.CIE = 1) 2. Acknowledge INTC (INTC.IAR = 1) 3. gets into interrupt source's handler, for example, timer's handler 4. Timer is interrupt handler acknowledge Timer Interrupt Status (Timer.TCSR0[23] = 1), and return 5. Enable INTC (INTC.SIE = 1) 6. Acknowledge INTC (INTC.IAR = 1) INTC continue to capture source inputs even if INTC is disabled (INTC.IER == 1). So between the gap of step 2 and step 3, the level interrupt from source makes INTC captures a new interrupt and thus the INTC.ISR = 1 during step 3, 4, and 5. When INTC is enabled in step 5, INTC's interrupt output will go high immediately. In summary, the driver should issue step 6 before step 5. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-12-13microblaze: Remove passing the second arg to schedule_tailMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-12-13microblaze: Remove BIP from childregsMichal Simek
Not necessary to use BIP for protection. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28microblaze: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-28Merge branches 'no-rebases', 'arch-avr32', 'arch-blackfin', 'arch-cris', ↵Al Viro
'arch-h8300', 'arch-m32r', 'arch-mn10300', 'arch-score', 'arch-sh' and 'arch-powerpc' into for-next
2012-11-28microblaze: rt_sigreturn is too trigger-happy about sigaltstack errorsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-16microblaze: switch to generic sys_execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-16microblaze: switch to generic kernel_execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16microblaze: switch to generic kernel_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-15microblaze: Fix bug with schedule_tailMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-12vfs: define struct filename and have getname() return itJeff Layton
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull pile 2 of execve and kernel_thread unification work from Al Viro: "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for several more architectures plus assorted signal fixes and cleanups. There'll be more (in particular, real fixes for the alpha do_notify_resume() irq mess)..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits) alpha: don't open-code trace_report_syscall_{enter,exit} Uninclude linux/freezer.h m32r: trim masks avr32: trim masks tile: don't bother with SIGTRAP in setup_frame microblaze: don't bother with SIGTRAP in setup_rt_frame() mn10300: don't bother with SIGTRAP in setup_frame() frv: no need to raise SIGTRAP in setup_frame() x86: get rid of duplicate code in case of CONFIG_VM86 unicore32: remove pointless test h8300: trim _TIF_WORK_MASK parisc: decide whether to go to slow path (tracesys) based on thread flags parisc: don't bother looping in do_signal() parisc: fix double restarts bury the rest of TIF_IRET sanitize tsk_is_polling() bury _TIF_RESTORE_SIGMASK unicore32: unobfuscate _TIF_WORK_MASK mips: NOTIFY_RESUME is not needed in TIF masks mips: merge the identical "return from syscall" per-ABI code ... Conflicts: arch/arm/include/asm/thread_info.h
2012-10-04Revert "microblaze_mmu_v2: Update signal returning address"Michal Simek
This reverts commit 8b28626a6b1522b39f75d0bf80d5dec23c931f5a. Offset -8 is wrong because when it is applied then one instruction before brki r14, 8 is called again when we return. Offset -4 is correct and brki instruction is called again. This change came from ancient MMU kernel. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Prefer to use pr_XXX instead of printk(KERN_XX)Michal Simek
Fix reset.c, timer.c, setup.c file. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Fix bug with passing command lineMichal Simek
When u-boot passes control over to Linux it places the Linux command line between to the end of __init_end. When space between __init_end and __bss_start is not COMMAND_LINE_SIZE then the part of cmdline can be lost. In extreme case if __init_end == __bss_start u-boot can't pass any cmdline to Linux kernel. This patch fix this issue by copying cmd line directly to cmd_line char array which is placed in data section. Reported-by: David Mc Andrew <david.mcandrew@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Remove additional andi which has been already doneMichal Simek
Remove one additional step. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Use predefined macro for ESR_DIZMichal Simek
Just use macro instead of hardcoded value. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Support 4k/16k/64k pagesMichal Simek
Add support for page size which is supported by MMU. Remove 8k and 32k page size because they are not supported by MMU. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Do not used hardcoded value in exception handlerMichal Simek
Use predefined macros to support more page sizes. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Added fdt chosen capability for timerMichal Simek
This lets a dts author flag a particular timer in the system as the system timer. If the chosen node contains a "system-timer=<&foo>" entry than that handle will be used to determine the system timer. In no such entry exists then the first found timer will be used (current behaviour). Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04microblaze: Improve failure handling for GPIO resetStephan Linz
Early exit from of_platform_reset_gpio_probe() if there was no GPIO reset line configured. Avoid kernel oops in gpio_system_reset(): [ 27.413294] Restarting system. [ 27.415674] Machine restart... [ 27.418787] Oops: kernel access of bad area, sig: 11 [ 27.423252] Registers dump: mode=83871D1C [ 27.427428] r1=00000000, r2=00000000, r3=FFFFFEF8, r4=00000000 [ 27.433310] r5=C026AED0, r6=00000001, r7=00000068, r8=00000000 [ 27.439189] r9=C3871DAC, r10=000011A5, r11=00000000, r12=0000000A [ 27.445318] r13=00000000, r14=0000000F, r15=C00029BC, r16=00000000 [ 27.451558] r17=C011DE8C, r18=80000115, r19=0000000F, r20=48184ED8 [ 27.457770] r21=00000000, r22=FFFFFFEA, r23=00000001, r24=FEE1DEAD [ 27.463982] r25=00000054, r26=1000B1C8, r27=00000000, r28=00000000 [ 27.470208] r29=00000000, r30=00000000, r31=C32D30C0, rPC=C011DE8C [ 27.476433] msr=000042A2, ear=0000004B, esr=00000872, fsr=342E3732 And remove useless dump_stack from machine_restart. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-01microblaze: don't bother with SIGTRAP in setup_rt_frame()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-27mtd/uclinux: Use generic __bss_stop instead of _ebssGeert Uytterhoeven
The standard (see BSS_SECTION() in <asm-generic/vmlinux.lds.h> and <asm-generic/sections.h>) symbol for the end of BSS is __bss_stop. This allows to remove all local declarations that have been added to several architectures just to please CONFIG_MTD_UCLINUX. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-01new helper: signal_delivered()Al Viro
Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from setAl Viro
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01pull clearing RESTORE_SIGMASK into block_sigmask()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: sigmask_to_save()Al Viro
replace boilerplate "should we use ->saved_sigmask or ->blocked?" with calls of obvious inlined helper... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: restore_saved_sigmask()Al Viro
first fruits of ..._restore_sigmask() helpers: now we can take boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK and restore the blocked mask from ->saved_mask" into a common helper. Open-coded instances switched... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull second pile of signal handling patches from Al Viro: "This one is just task_work_add() series + remaining prereqs for it. There probably will be another pull request from that tree this cycle - at least for helpers, to get them out of the way for per-arch fixes remaining in the tree." Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile had brought in commit 97fd75b7b8e0 ("kernel/irq/manage.c: use the pr_foo() infrastructure to prefix printks") which changed one of the pr_err() calls that this merge moves around. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: keys: kill task_struct->replacement_session_keyring keys: kill the dummy key_replace_session_keyring() keys: change keyctl_session_to_parent() to use task_work_add() genirq: reimplement exit_irq_thread() hook via task_work_add() task_work_add: generic process-context callbacks avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers parisc: need to check NOTIFY_RESUME when exiting from syscall move key_repace_session_keyring() into tracehook_notify_resume() TIF_NOTIFY_RESUME is defined on all targets now
2012-05-28Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze changes from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Setup correct pointer to TLS area microblaze: Add TLS support to sys_clone microblaze: ftrace: Pass the first calling instruction for dynamic ftrace microblaze: Port OOM changes to do_page_fault microblaze: Do not select GENERIC_GPIO by default
2012-05-25microblaze: Setup correct pointer to TLS areaEdgar E. Iglesias
Setup a pointer to the TLS area in copy_thread. r10 is 6th argumetn which contains TLS area. And r21 is the thread reg. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-05-25microblaze: Add TLS support to sys_cloneEdgar E. Iglesias
Formerly unused Args 4/5 now load parent tid / child tid so the brid to do_fork can pick up TLS from r10. Arg 3 still unused There is also necessary to fix old glibc which do not setup r9/r10 (arg 4/5). Simple clearing them is fine. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-05-25microblaze: ftrace: Pass the first calling instruction for dynamic ftraceMichal Simek
Selftest for dynamic ftrace requres to pass address of the first calling instruction because hash function is calculated from it. ftrace_update_ftrace_func setups pointer to function which is called in _mcount function. trace_selftest is not aware about instruction size (for microblaze 8 - imm and addik) and that's why we have to pass in r5 address of imm not addik which is in r15.12 For more info look at ftrace_ops_list_func/ftrace.c. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-05-23move key_repace_session_keyring() into tracehook_notify_resume()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull first series of signal handling cleanups from Al Viro: "This is just the first part of the queue (about a half of it); assorted fixes all over the place in signal handling. This one ends with all sigsuspend() implementations switched to generic one (->saved_sigmask-based). With this, a bunch of assorted old buglets are fixed and most of the missing bits of NOTIFY_RESUME hookup are in place. Two more fixes sit in arm and um trees respectively, and there's a couple of broken ones that need obvious fixes - parisc and avr32 check TIF_NOTIFY_RESUME only on one of two codepaths; fixes for that will happen in the next series" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (55 commits) unicore32: if there's no handler we need to restore sigmask, syscall or no syscall xtensa: add handling of TIF_NOTIFY_RESUME microblaze: drop 'oldset' argument of do_notify_resume() microblaze: handle TIF_NOTIFY_RESUME score: add handling of NOTIFY_RESUME to do_notify_resume() m68k: add TIF_NOTIFY_RESUME and handle it. sparc: kill ancient comment in sparc_sigaction() h8300: missing checks of __get_user()/__put_user() return values frv: missing checks of __get_user()/__put_user() return values cris: missing checks of __get_user()/__put_user() return values powerpc: missing checks of __get_user()/__put_user() return values sh: missing checks of __get_user()/__put_user() return values sparc: missing checks of __get_user()/__put_user() return values avr32: struct old_sigaction is never used m32r: struct old_sigaction is never used xtensa: xtensa_sigaction doesn't exist alpha: tidy signal delivery up score: don't open-code force_sigsegv() cris: don't open-code force_sigsegv() blackfin: don't open-code force_sigsegv() ...
2012-05-21microblaze: drop 'oldset' argument of do_notify_resume()Al Viro
never used... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: handle TIF_NOTIFY_RESUMEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: bury sys_rt_sigsuspend_wrapper in nommu case tooAl Viro
It's been a dead code since commit 571202f50fad0aeb36661c79de9beed052347df8 Author: Michal Simek <monstr@monstr.eu> Date: Fri Dec 11 12:54:04 2009 +0100 microblaze: Remove rt_sigsuspend wrapper Generic rt_sigsuspend syscalls doesn't need any asm wrapper. but that commit has only removed it from entry.S, missing one in entry-nommu.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: ->restart_block.fn needs to be reset on rt_sigreturnAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: use set_current_blocked() and block_sigmask()Matt Fleming
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: fix signal maskingMatt Fleming
There are a couple of problems with the current signal code, 1. If we failed to setup the signal stack frame then we should not be masking any signals. 2. ka->sa.sa_mask is only added to the current blocked signals list if SA_NODEFER is set in ka->sa.sa_flags. If we successfully setup the signal frame and are going to run the handler then we must honour sa_mask. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: no need to reset handler if SA_ONESHOTMatt Fleming
get_signal_to_deliver() already resets the signal handler if SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again in handle_signal(). Furthermore, because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]) instead of sighand->action[] the original code actually had no effect on signal delivery. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21microblaze: don't reimplement force_sigsegv()Matt Fleming
Instead of open coding the sequence from force_sigsegv() just call it. This also fixes a bug because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]), whereas the intention of the code was to modify sighand->action[] directly. As the original code was working with a copy it had no effect on signal delivery. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "New notable features: - The seccomp work from Will Drewry - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski - Longer security labels for Smack from Casey Schaufler - Additional ptrace restriction modes for Yama by Kees Cook" Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) apparmor: fix long path failure due to disconnected path apparmor: fix profile lookup for unconfined ima: fix filename hint to reflect script interpreter name KEYS: Don't check for NULL key pointer in key_validate() Smack: allow for significantly longer Smack labels v4 gfp flags for security_inode_alloc()? Smack: recursive tramsmute Yama: replace capable() with ns_capable() TOMOYO: Accept manager programs which do not start with / . KEYS: Add invalidation support KEYS: Do LRU discard in full keyrings KEYS: Permit in-place link replacement in keyring list KEYS: Perform RCU synchronisation on keys prior to key destruction KEYS: Announce key type (un)registration KEYS: Reorganise keys Makefile KEYS: Move the key config into security/keys/Kconfig KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat Yama: remove an unused variable samples/seccomp: fix dependencies on arch macros Yama: add additional ptrace scopes ...
2012-05-05microblaze: Use generic init_taskThomas Gleixner
Same code. Use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michal Simek <monstr@monstr.eu> Link: http://lkml.kernel.org/r/20120503085034.881532838@linutronix.de
2012-04-18seccomp: ignore secure_computing return valuesWill Drewry
This change is inspired by https://lkml.org/lkml/2012/4/16/14 which fixes the build warnings for arches that don't support CONFIG_HAVE_ARCH_SECCOMP_FILTER. In particular, there is no requirement for the return value of secure_computing() to be checked unless the architecture supports seccomp filter. Instead of silencing the warnings with (void) a new static inline is added to encode the expected behavior in a compiler and human friendly way. v2: - cleans things up with a static inline - removes sfr's signed-off-by since it is a different approach v1: - matches sfr's original change Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA mapping branch from Marek Szyprowski: "Short summary for the whole series: A few limitations have been identified in the current dma-mapping design and its implementations for various architectures. There exist more than one function for allocating and freeing the buffers: currently these 3 are used dma_{alloc, free}_coherent, dma_{alloc,free}_writecombine, dma_{alloc,free}_noncoherent. For most of the systems these calls are almost equivalent and can be interchanged. For others, especially the truly non-coherent ones (like ARM), the difference can be easily noticed in overall driver performance. Sadly not all architectures provide implementations for all of them, so the drivers might need to be adapted and cannot be easily shared between different architectures. The provided patches unify all these functions and hide the differences under the already existing dma attributes concept. The thread with more references is available here: http://www.spinics.net/lists/linux-sh/msg09777.html These patches are also a prerequisite for unifying DMA-mapping implementation on ARM architecture with the common one provided by dma_map_ops structure and extending it with IOMMU support. More information is available in the following thread: http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819 More works on dma-mapping framework are planned, especially in the area of buffer sharing and managing the shared mappings (together with the recently introduced dma_buf interface: commit d15bd7ee445d "dma-buf: Introduce dma buffer sharing mechanism"). The patches in the current set introduce a new alloc/free methods (with support for memory attributes) in dma_map_ops structure, which will later replace dma_alloc_coherent and dma_alloc_writecombine functions." People finally started piping up with support for merging this, so I'm merging it as the last of the pending stuff from the merge window. Looks like pohmelfs is going to wait for 3.5 and more external support for merging. * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: common: DMA-mapping: add NON-CONSISTENT attribute common: DMA-mapping: add WRITE_COMBINE attribute common: dma-mapping: introduce mmap method common: dma-mapping: remove old alloc_coherent and free_coherent methods Hexagon: adapt for dma_map_ops changes Unicore32: adapt for dma_map_ops changes Microblaze: adapt for dma_map_ops changes SH: adapt for dma_map_ops changes Alpha: adapt for dma_map_ops changes SPARC: adapt for dma_map_ops changes PowerPC: adapt for dma_map_ops changes MIPS: adapt for dma_map_ops changes X86 & IA64: adapt for dma_map_ops changes common: dma-mapping: introduce generic alloc() and free() methods
2012-04-02microblaze: Do not use tlb_skip in early_printkMichal Simek
tlb_skip is valid only for MMU system. Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 10:44:15 +0000