aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon/octeon-irq.c
AgeCommit message (Collapse)Author
2012-08-31MIPS: OCTEON: Register ciu/ciu2 as the default irq_domain.David Daney
This makes it possible to call irq_create_mapping(NULL, ??) Signed-off-by: David Daney <david.daney@cavium.com>
2012-08-31MIPS: Octeon: Make interrupt controller work with threaded handlers.David Daney
For CIUv1 controllers, we were relying on all calls to the irq_chip functions to be done from the CPU that received the irq, and that they would all be done from interrupt contest. These assumptions do not hold for threaded handlers. We make all the masking actually mask the irq source, and use real raw_spin_locks instead of manually twiddling the Status[IE] bit. Signed-off-by: David Daney <david.daney@cavium.com>
2012-08-31MIPS: OCTEON: Add support for cn68XX interrupt controller.David Daney
The cn68XX has a new interrupt controller named CIU2, add support for this, and use it if cn68XX detected at runtime. Signed-off-by: David Daney <david.daney@cavium.com>
2012-08-17MIPS: Octeon: Fix broken interrupt controller code.David Daney
Since 3.6.0-rc1, We are getting many messages like: WARNING: at kernel/irq/irqdomain.c:444 irq_domain_associate_many+0x23c/0x260() Modules linked in: Call Trace: [<ffffffff814cb698>] dump_stack+0x8/0x34 [<ffffffff81133d00>] warn_slowpath_common+0x78/0xa8 [<ffffffff81187e44>] irq_domain_associate_many+0x23c/0x260 [<ffffffff81187f38>] irq_create_mapping+0xd0/0x220 [<ffffffff81188104>] irq_create_of_mapping+0x7c/0x158 [<ffffffff813e5f08>] irq_of_parse_and_map+0x28/0x40 . . . Both the CIU and GPIO interrupt domains were somewhat screwed up. For the CIU domain, we need to call irq_domain_associate() for each of the preassigned irq numbers. For the GPIO domain, we were applying the register bit offset in octeon_irq_gpio_xlat, but it should be done in octeon_irq_gpio_map instead. Also: Reserve all 8 'core' irqs for the 'core' irq_chip so that they don't get used by the other domains. Remove unused OCTEON_IRQ_* symbols. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4190/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Use device tree to register serial ports.David Daney
Switch to using the device tree to register serial ports. Add all the ports with compatible = "cavium,octeon-3860-uart". Octeon serial ports have their own device type, required port flags, and I/O functions, so using of_serial.c is not indicated. We need to do this as late_initcall, as the 8250 driver must be initialized before we add any ports. 8250 initialization is done at device_initcall time. The OCTEON_IRQ_UART{0,1,2} symbols are removed as they are now unused and interfere with irq_domain used by the device tree code. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3942/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23netdev: octeon_mgmt: Convert to use device tree.David Daney
The device tree will supply the register bank base addresses, make register addressing relative to those. PHY connection is now described by the device tree. The OCTEON_IRQ_MII{0,1} symbols are also removed as they are now unused and interfere with the irq_domain used for device tree irq mapping. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23i2c: Convert i2c-octeon.c to use device tree.David Daney
There are three parts to this: 1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2. The interrupts are specified by the device tree and these hard coded irq numbers block the used of the irq lines by the irq_domain code. 2) Remove platform device setup code from octeon-platform.c, it is now unused. 3) Convert i2c-octeon.c to use device tree. Part of this includes using the devm_* functions instead of the raw counterparts, thus simplifying error handling. No functionality is changed. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3939/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Setup irq_domains for interrupts.David Daney
Create two domains. One for the GPIO lines, and the other for on-chip sources. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: OCTEON: Consolidate the edge and level irq_chip structures.David Daney
We can consolidate octeon_irq_chip_ciu_edge and octeon_irq_chip_ciu as they only differ in the .irq_ack element, and that is unused by the level handler. This gets rid of a bunch of duplicate definitions. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3931/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: OCTEON: Remove unneeded OCTEON_IRQ_* defines.David Daney
The follow-on patch to add irq_domain support will be the supported method for using these irq lines, so get these defines out of the way in preperation for that. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3930/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Add irq handlers for GPIO interrupts.David Daney
This is needed for follow-on on patches for Octeon to use the Device Tree to configure GPIO interrupts. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3932/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Octeon: Simplify irq_cpu_on/offline irq chip functionsThomas Gleixner
Make use of the IRQCHIP_ONOFFLINE_ENABLED flag and remove the wrappers. Use irqd_irq_disabled() instead of desc->status, which will go away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Daney <ddaney@caviumnetworks.com>
2011-03-29MIPS: Octeon: Rewrite interrupt handling code.David Daney
This includes conversion to new style irq_chip functions, and correctly enabling/disabling per-CPU interrupts. The hardware interrupt bit to irq number mapping is now done with a flexible map, instead of by bit twiddling the irq number. [ tglx: Adjusted to new irq_cpu_on/offline callbacks and __irq_set_affinity_lock ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-5-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-08-05MIPS: Octeon: Fix fixup_irqs for HOTPLUG_CPUDavid Daney
The original version went behind the back of everything, leaving things in an inconsistent state. Now we use the irq_set_affinity() to do the work for us. This has the advantage that the IRQ core's view of the affinity stays consistent. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1486/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Improve interrupt handling.David Daney
The main change is to change most of the IRQs from handle_percpu_irq to handle_fasteoi_irq. This necessitates extracting all the .ack code to common functions that are not exposed to the irq core. The affinity code now acts more sanely, by doing round-robin distribution instead of broadcasting. Because of the change to handle_fasteoi_irq and affinity, some of the IRQs had to be split into separate groups with their own struct irq_chip to prevent undefined operations on specific IRQ lines. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Move MSI code out of octeon-irq.c.David Daney
Put all the MSI code in one place (msi-octeon.c). This simplifies octeon-irq.c and gets rid of some ugly #ifdefs Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1484/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/972/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Make various locks static.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Do proper acknowledgment of CIU timer interrupts.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/967/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Fix EOI handling.David Daney
If an interrupt handler disables interrupts, the EOI function will just reenable them. This will put us in an endless loop when the upcoming Ethernet driver patches are applied. Only reenable the interrupt on EOI if it is not IRQ_DISABLED. This requires that the EOI function be separate from the ENABLE function. We also rename the ACK functions to correspond with their function. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02MIPS: Octeon: Use lockless interrupt controller operations when possible.David Daney
Some newer Octeon chips have registers that allow lockless operation of the interrupt controller. Take advantage of them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinityDavid Daney
Since the locks are used from interrupt context we need the irqsave/irqrestore versions of the locking functions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Cavium: Add CPU hotplugging code.Ralf Baechle
Thanks to Cavium Inc. for the code contribution and help. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-24MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.Ralf Baechle
Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add Cavium OCTEON PCI support.David Daney
This patch adds support for PCI and PCIe to the base Cavium OCTEON processor support. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-04-28irq: change ->set_affinity() to return statusYinghai Lu
according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30MIPS: Convert obsolete irq_desc_t to struct irq_descThomas Gleixner
Impact: cleanup Convert the last remaining users to struct irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.David Daney
These are the rest of the new files needed to add OCTEON processor support to the Linux kernel. Other than Makefile and Kconfig which should be obvious, we have: csrc-octeon.c -- Clock source driver for OCTEON. dma-octeon.c -- Helper functions for mapping DMA memory. flash_setup.c -- Register on-board flash with the MTD subsystem. octeon-irq.c -- OCTEON interrupt controller managment. octeon-memcpy.S -- Optimized memcpy() implementation. serial.c -- Register 8250 platform driver and early console. setup.c -- Early architecture initialization. smp.c -- OCTEON SMP support. octeon_switch.S -- Scheduler context switch for OCTEON. c-octeon.c -- OCTEON cache controller support. cex-oct.S -- OCTEON cache exception handler. asm/mach-cavium-octeon/*.h -- Architecture include files. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/Kconfig create mode 100644 arch/mips/cavium-octeon/Makefile create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c create mode 100644 arch/mips/cavium-octeon/dma-octeon.c create mode 100644 arch/mips/cavium-octeon/flash_setup.c create mode 100644 arch/mips/cavium-octeon/octeon-irq.c create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S create mode 100644 arch/mips/cavium-octeon/serial.c create mode 100644 arch/mips/cavium-octeon/setup.c create mode 100644 arch/mips/cavium-octeon/smp.c create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h create mode 100644 arch/mips/include/asm/octeon/octeon.h create mode 100644 arch/mips/kernel/octeon_switch.S create mode 100644 arch/mips/mm/c-octeon.c create mode 100644 arch/mips/mm/cex-oct.S
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 08:39:59 +0000