aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2012-07-30Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-30ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30atomic64_test: simplify the #ifdef for atomic64_dec_if_positive() testCatalin Marinas
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
2012-07-26posix_types.h: Cleanup stale __NFDBITS and related definitionsJosh Boyer
Recently, glibc made a change to suppress sign-conversion warnings in FD_SET (glibc commit ceb9e56b3d1). This uncovered an issue with the kernel's definition of __NFDBITS if applications #include <linux/types.h> after including <sys/select.h>. A build failure would be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2 flags to gcc. It was suggested that the kernel should either match the glibc definition of __NFDBITS or remove that entirely. The current in-kernel uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no uses of the related __FDELT and __FDMASK defines. Given that, we'll continue the cleanup that was started with commit 8b3d1cda4f5f ("posix_types: Remove fd_set macros") and drop the remaining unused macros. Additionally, linux/time.h has similar macros defined that expand to nothing so we'll remove those at the same time. Reported-by: Jeff Law <law@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> CC: <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> [ .. and fix up whitespace as per akpm ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-25Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', ↵Ralf Baechle
'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next
2012-07-25MIPS: Loongson 1B: Add defconfigKelvin Cheung
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: zhzhl555@gmail.com Cc: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4135/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-25MIPS: Loongson 1B: Add board supportKelvin Cheung
Adds basic platform devices for Loongson 1B, including serial port, ethernet, USB, RTC and interrupt handler. The Loongson 1B UART is compatible with NS16550A, the Loongson 1B GMAC is built around a Synopsys IP Core. Use normal instead of enhanced descriptors. Thanks to Giuseppe for updating the normal descriptor in stmmac driver. Thanks to Zhao Zhang for implementing the RTC driver. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: zhzhl555@gmail.com Cc: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4133/ Patchwork: https://patchwork.linux-mips.org/patch/4134/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug: - Add MMCONFIG support for hot-added host bridges (Jiang Liu) Device hotplug: - Move fixups from __init to __devinit (Sebastian Andrzej Siewior) - Call FINAL fixups for hot-added devices, too (Myron Stowe) - Factor out generic code for P2P bridge hot-add (Yinghai Lu) - Remove all functions in a slot, not just those with _EJx (Amos Kong) Dynamic resource management: - Track bus number allocation (struct resource tree per domain) (Yinghai Lu) - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu) - Disable decoding while updating 64-bit BARs (Bjorn Helgaas) Power management: - Add PCIe runtime D3cold support (Huang Ying) Virtualization: - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson) - Add quirks for devices with broken INTx masking (Jan Kiszka) Miscellaneous: - Fix some PCI Express capability version issues (Myron Stowe) - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)" * tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits) PCI: hotplug: ensure a consistent return value in error case PCI: fix undefined reference to 'pci_fixup_final_inited' PCI: build resource code for M68K architecture PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width() PCI: reorder __pci_assign_resource() (no change) PCI: fix truncation of resource size to 32 bits PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: call final fixups hot-added devices PCI: move final fixups from __init to __devinit x86/PCI: move final fixups from __init to __devinit MIPS/PCI: move final fixups from __init to __devinit PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: disable MEM decoding while updating 64-bit MEM BARs PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too PCI: never discard enable/suspend/resume_early/resume fixups PCI: release temporary reference in __nv_msi_ht_cap_quirk() PCI: restructure 'pci_do_fixups()' ...
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-24MIPS: Netlogic: early console fixJayachandran C
In prom_putchar(), wait for just the TX empty bit to clear in the UART LSR. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/4112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Fix indentation of smpboot.SJayachandran C
[ralf@linux-mips.org: I've folded most segments of this patch into those patches in -next that originally were causing the whitespace damage. This is just what's left over] Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4094/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: remove cpu_has_dc_aliases define for XLPJayachandran C
On XLP, the dcache size depends on the number of enabled threads in core. There are no dcache aliases if the pagesize is large enough or if enough threads are enabled in the core. Remove the #define for cpu_has_dc_aliases and leave it to be computed at runtime. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4099/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Remove unused pcibios_fixupsJayachandran C
This global is unneeded, and seems to be carried over from ancient code. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Add XLP SoC devices in FDTGanesan Ramalingam
Probe and add devices on SoC "simple-bus" on startup. This will in turn add devices like I2C controller that are specified in the device tree under 'soc'. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3762/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Add IRQ mappings for more devicesJayachandran C
Add IRT to IRQ translation for the MMC and I2C IRQs. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: USB support for XLPGanesan Ramalingam
The XLP USB controller appears as a device on the internal SoC PCIe bus, the block has 2 EHCI blocks and 4 OHCI blocks. Change are to: * Add files netlogic/xlp/usb-init.c and asm/netlogic/xlp-hal/usb.h to initialize the USB controller and define PCI fixups. The PCI fixups are to setup interrupts and DMA mask. * Update include/asm/xlp-hal/{iomap.h,pic.h,xlp.h} to add interrupt mapping for EHCI/OHCI interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: XLP PCIe controller support.Ganesan Ramalingam
Adds support for the XLP on-chip PCIe controller. On XLP, the on-chip devices(including the 4 PCIe links) appear in the PCIe configuration space of the XLP as PCI devices. The changes are to initialize and register the PCIe controller, enable hardware byte swap in the PCIe IO and MEM space, and to enable PCIe interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3760/ Patchwork: https://patchwork.linux-mips.org/patch/4104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLR/XLS I2CJayachandran C
Add platform code for XLR/XLS I2C controller and devices. Add devices on the I2C bus on the XLR/XLS developement boards. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3757/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform NAND/NOR flash supportGanesan Ramalingam
Changes to add support for the boot NOR flash on XLR boards and the boot NAND/NOR flash drivers on the XLS boards. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLS USBJayachandran C
Add USB initialization code, setup resources and add USB platform driver in mips/netlogic/xlr/platform.c. Add USB support for XLR/XLS platform in Kconfig. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Remove NETLOGIC_ prefixJayachandran C
Remove NETLOGIC_ prefix from gpio register definitions, this will bring it in-line with the other Netlogic headers. Having NETLOGIC prefix here is misleading because these are XLR/XLS specific register definitions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: SMP wakeup code updateJayachandran C
Update for core intialization code. Initialize status register after receiving NMI for CPU wakeup. Add the low level L1D flush code before enabling threads in core. Also convert the ehb to _ehb so that it works under more GCC versions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3755/ Patchwork: https://patchwork.linux-mips.org/patch/4095/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Update comments in smpboot.SJayachandran C
No change in logic, comments update and whitespace cleanup. * A few comments in the file were in assembler style and the rest int C style, convert all of them to C style. * Mark workarounds for Ax silicon with a macro XLP_AX_WORKAROUND * Whitespace fixes - use tabs consistently * rename __config_lsu macro to xlp_config_lsu Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add 96328avng reference boardJonas Gorski
This allows booting to command line. Ethernet is not supported yet, but PCIe connected wireless should work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3958/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Expose PCIe drivers for MIPSJonas Gorski
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3957/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add PCIe Support for BCM6328Jonas Gorski
Add support for the PCIe port found on BCM6328. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3956/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Move the PCI initialization into its own functionJonas Gorski
Also make the cpu check a bit more explicit. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3953/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add basic BCM6328 supportJonas Gorski
This includes CPU speed, memory size detection and working UART, but lacking the appropriate drivers, no support for attached flash. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3951/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Use the Chip ID register for identifying the SoCJonas Gorski
Newer BCM63XX SoCs use virtually the same CPU ID, differing only in the revision bits. But since they all have the Chip ID register at the same location, we can use that to identify the SoC we are running on. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3955/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add flash type detectionJonas Gorski
On BCM6358 and BCM6368 the attached flash type is exposed through a bootstrapping register. Use it for auto detecting the flash type on those and default to parallel flash for earlier SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3954/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Move flash registration out of board_bcm963xx.cJonas Gorski
board_bcm963xx.c is already large enough. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3952/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add RNG driver platform_device stubFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3325/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add RNG peripheral definitionsFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3326/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add support for "ipsec" clockFlorian Fainelli
This module is only available on BCM6368 so far and does not require resetting the block. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: OCTEON: Remove some unused files.David Daney
These FPA related files are not used anywhere in the kernel. Remove them. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Fix platform_devices idFlorian Fainelli
There is only one watchdog and VoIP DSP platform devices per board, use -1 as the platform_device id accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Add CPU support for Loongson1BKelvin Cheung
Loongson 1B is a 32-bit SoC designed by Institute of Computing Technology (ICT) and the Chinese Academy of Sciences (CAS), which implements the MIPS32 release 2 instruction set. [ralf@linux-mips.org: But which is not strictly a MIPS32 compliant device which also is why it identifies itself with the Legacy Vendor ID in the PrID register. When applying the patch I shoveled some code around to keep things in alphabetical order and avoid forward declarations.] Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: To: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: zhzhl555@gmail.com Cc: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3976/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Enable vmlinuz for JZ4740Lluís Batlle i Rossell
This patch adds support for building a compressed kernel for the JZ4740 architecture. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: JZ4740: reset: Initialize hibernate wakeup counters.Maarten ter Huurne
In hibernation mode only the wakeup logic and the RTC are left running, so this is what users perceive as power down. If the counters are not initialized, the corresponding pin (typically connected to the power button) has to be asserted for two seconds before the device wakes up. Most users expect a shorter wakeup time. I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for the Dingoo A320 kernel. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: JZ4740: qi_lb60: Look for NAND chip in bank 1.Maarten ter Huurne
All NanoNotes have their NAND in bank 1. Specifying the bank is required since multi-bank support was introduced. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3561/ Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MTD: NAND: JZ4740: Multi-bank support with autodetectionMaarten ter Huurne
The platform data can now specify which external memory banks to probe for NAND chips, and in which order. Banks that contain a NAND are used and the other banks are freed. Squashed version of development done in jz-2.6.38 branch. Original patch by Lars-Peter Clausen with some bug fixes from me. Thanks to Paul Cercueil for the initial autodetection patch. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3560/ Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Fixup ordering of micro assembler instructions.Steven J. Hill
A number of new instructions have been added to the micro assembler causing the list to no longer be in alphabetical order. This patch fixes up the name ordering. Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Unify memcpy.S and memcpy-inatomic.SDavid Daney
We can save the 451 lines of code that comprise memcpy-inatomic.S at the expense of a single instruction in the memcpy prolog. We also use an additional register (t6), so this may cause increased register pressure in some places as well. But I think the reduced maintenance burden, of not having two nearly identical implementations, makes it worth it. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Implement Octeon specific __copy_user_inatomicDavid Daney
The generic version seems to prefetch past the end of memory. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3929/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Malta: Move PIIX4 PCI fixup to where it belongs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: PCI: Add missing __devinit attributions to fixup functions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: Use kmemdup rather than duplicating its implementationThomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3058/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: loongson: use IS_ENABLED()Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: DEC: use IS_ENABLED()Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 04:34:53 +0000