aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
AgeCommit message (Collapse)Author
2006-12-05[POWERPC] ps3: add a default zImage targetGeoff Levand
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Linkstation / kurobox supportGuennadi Liakhovetski
Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Clean images in arch/powerpc/bootGeert Uytterhoeven
Add a rule to clean up the various generated image files in arch/powerpc/boot. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add device trees for lite5200 and lite5200b eval boardsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add files build to .gitignoreRutger Nijlunsing
Mostly taken from corresponding Makefile's make-clean rule. Tested by (cross)compiling for $ARCH PPC and POWERPC and checking output of git-status. Signed-off-by: Rutger Nijlunsing <git-commit@tux.tmfweb.nl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] ps3: add a default zImage targetArnd Bergmann
It's currently not possible to build the default zImage target if PS3 is the only selected platform. This is a hack to fall back to building the pseries style zImage, so the build is successful. This will probably change in the future, if someone writes a PS3 specific boot wrapper. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] Compile a zImage.chrp if PPC_EFIKA seletedNicolas DET
Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Cleanup zImage handling of kernel entry with flat device treeDavid Gibson
This makes 2 changes to clean up the flat device tree handling logic in the zImage wrapper. First, there were two callbacks from the dt_ops structure used for producing a final flat tree to pass to the kerne: dt_ops.ft_pack() which packed the flat tree (possibly a no-op) and dt_ops.ft_addr() which retreived the address of the final blob. Since they were only ever called together, this patch combines the two into a single new callback, dt_ops.finalize(). This new callback does whatever platform-dependent things are necessary to produce a final flat device tree blob, and returns the blob's addres. Second, the current logic calls the kernel with a flat device tree if one is build into the zImage wrapper, otherwise it boots the kernel with a PROM pointer, expecting the kernel to copy the OF device tree itself. This approach precludes the possibility of the platform wrapper code building a flat device tree from whatever platform-specific information firmware provides. Thus, this patch takes the more sensible approach of invoking the kernel with a flat tree if the dt_ops.finalize callback provides one (by whatever means). So, the dt_ops.finalize callback can be NULL, or can be a function which returns NULL. In either case, the zImage wrapper logic assumes that this is a platform with OF and invokes the kernel accordingly. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Small clarification of initrd handlingDavid Gibson
This patch makes the handling of the initrd (or initramfs) in the zImage wrapper a little easier to follow. Instead of passing the initrd addresses out from prep_kernel() via the cryptic a1 and a2 parameters, use the global struct add_range, 'initrd'. prep_kernel() already passes information through the 'vmlinux' addr_range struct, so this seems like a reasonable extension. Some comments also clarify the logic with prep_kernel(): we use an initrd included in the zImage if present, otherwise we use an initrd passed in by the bootloader in the a1 and a2 parameters (yaboot, at least, uses this mechanism to pass an initrd). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 boardZang Roy-r61911
The following patch adds a tsi108/9 pci interrupt controller host. On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the pci_read_irq_line be the default pci irq fixup. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04Merge branch 'linux-2.6' into for-linusPaul Mackerras
2006-11-13[PATCH] Make git ignore new wrapper generated filesKim Phillips
The new 'wrapper' code generates files that git should ignore; add them to .gitignore. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13[PATCH] Remove arch/powerpc/boot/zImage file.Mark A. Greer
The bootwrapper Makefile does not clean up the 'zImage' file that may be left laying around. This patch removes it when cleaning that directory. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13[PATCH] Remove dtb file created by wrapper scriptMark A. Greer
When the wrapper script is passed a dts file, it runs 'dtc' to create a dtb file. This patch deletes that dtb file once its no longer needed. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-09[POWERPC] Make sure initrd and dtb sections get into zImage correctlyPaul Mackerras
The "wrapper" script was using the wrong names for the initrd and dtb (device-tree blob) sections. This fixes it, and also ensures the symbols for the start and end of the dtb get defined correctly. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Fixed some missing files to be deleted when running make cleanMatthew McClintock
Fixed some missing files to be deleted when running make clean Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24[POWERPC] Add mktree utility to arch/powerpc/bootJosh Boyer
This patch adds the mktree program that is needed to post process zImage wrappers for various PowerPC 4xx boards Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23[POWERPC] Don't require execute perms on wrapper when building zImage.initrdMark A. Greer
Don't require that the wrapper script be executable when building zImage.initrds. This has already been fixed for zImages. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23[POWERPC] Add simple memory allocator to bootwrapperMark A. Greer
Provide primitive malloc, free, and realloc functions for bootwrapper. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23[POWERPC] Add non-OF serial console supportMark A. Greer
Add serial console support for non-OF systems. There is a generic serial console layer which calls a serial console driver. Included is the serial console driver for the ns16550 class of uarts. Necessary support routines are added as well. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23[POWERPC] Add flatdevtree sourceMark A. Greer
Add the latest version of the flatdevtree code and corresponding glue. A phandle table now tracks values returned by ft_find_device(). The value returned by ft_find_device() is a phandle which is really an index into the phandle table. The phandle table contains the address of the corresponding node. When the flat dt is edited/moved, the node pointers in the phandle table are updated accordingly so no phandles kept by the caller become stale. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18[POWERPC] More bootwrapper reorganizationMark A. Greer
More reorganization of the bootwrapper: - Add dtb section to zImage - ft_init now called by platform_init - Pack a flat dt before calling kernel - Remove size parameter from free - printf only calls console_ops.write it its not NULL - Some cleanup Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10[POWERPC] cell: fix default zImage build targetGeoff Levand
Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot makefile. CONFIG_PPC_CELL is used to build the generic cell processor support, and is not an indication of platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10[POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spacesMichael Ellerman
My CROSS_COMPILE is "ccache /opt/compilers/blah", which confuses the boot wrapper script. Quote CROSS_COMPILE and CROSS32_COMPILE so they can safely contain spaces. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06[POWERPC] Fix zImage decompress locationBenjamin Herrenschmidt
The zImage wrapper has a "hack" that force the decompression to happen above 20Mb for 64 bits kernels, to work around issues with some firmwares on the field. However, the new wrapper has a bug which makes that hack not work properly. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06[POWERPC] Add DTS for MPC8349E-mITX boardTimur Tabi
Add the DTS for the Freescale MPC 8349E-mITX reference board. Contact Vitesse for the driver for the VSC 7385. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits) [POWERPC] Add support for the mpc832x mds board [POWERPC] Add initial support for the e300c2 core [POWERPC] Add MPC8360EMDS default dts file [POWERPC] Add MPC8360EMDS board support [POWERPC] Add QUICC Engine (QE) infrastructure [POWERPC] Add QE device tree node definition [POWERPC] Don't try to just continue if xmon has no input device [POWERPC] Fix a printk in pseries_mpic_init_IRQ [POWERPC] Get default baud rate in udbg_scc [POWERPC] Fix zImage.coff on oldworld PowerMac [POWERPC] Fix xmon=off and cleanup xmon initialisation [POWERPC] Cleanup include/asm-powerpc/xmon.h [POWERPC] Update swim3 printk after blkdev.h change [POWERPC] Cell interrupt rework POWERPC: mpc82xx merge: board-specific/platform stuff(resend) POWERPC: 8272ads merge to powerpc: common stuff POWERPC: Added devicetree for mpc8272ads board [POWERPC] iSeries has no legacy I/O [POWERPC] implement BEGIN/END_FW_FTR_SECTION [POWERPC] iSeries does not need pcibios_fixup_resources ...
2006-10-04[PATCH] git-powerpc: wrapper: don't require execute permissionsAndrew Morton
If you lose the x bit (eg: by using patch(1)), powerpc won't build. Be defensive about it... Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[POWERPC] Add MPC8360EMDS default dts fileLi Yang
Add MPC8360EMDS default device-tree source file Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <Tanya.jiang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04Merge branch 'upstream' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ
2006-10-04[POWERPC] Fix zImage.coff on oldworld PowerMacBenjamin Herrenschmidt
Recent changes to the PowerPC zImage wrapper broke zImage.coff due to the addition of new ELF sections that aren't very well converted to xcoff and not supported by old OpenFirmware. This fixes it by putting those sections in the xcoff .data. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03POWERPC: Added devicetree for mpc8272ads boardVitaly Bordug
This adds current dts file used with MPC8272ADS, introducing new mdio bitbang defines, as well as fully-CPM2-SoC board design. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-28[POWERPC] Create a "wrapper" script and use it in arch/powerpc/bootPaul Mackerras
This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-28Merge branch 'upstream' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ
2006-09-21POWERPC: Bring the fs_no calculation to the relevant SoC enumerationVitaly Bordug
The fs_no mean used to be fs_enet driver driven, hence it was an enumeration across all the possible fs_enet "users" in the SoC. Now, with QE on the pipeline, and to make DTS descriptions more clear, fs_no features relevant SoC part number, with additional field to describe the SoC type. Another reason for that is now not only fs_enet is going to utilize those stuff. There might be UART, HLDC, and even USB, so to prevent confusion and be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were updated in that concern, as well as the relevant DTS. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21POWERPC: Add support for the mpc8560 eval boardVitaly Bordug
This makes the 8560 evaluation board fully supported under arch/powerpc, as the first board with CPM2 SoC peripherals. The brand new devicetree nodes are introduced (intending to be a subset of the QuiccEngine-equipped models, with dts sources placed into the kernel according to the new convention. Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART update), the both TSEC eth ,FCC Eths, and both SCC UARTs are working. The relevant drivers are still capable to drive users in ppc, which was verified with 8272ADS (SCC uart+FCC eth). This is also verified on mpc8540 and actually make it work (PCI stuff working as well) Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-20[POWERPC] Start arch/powerpc/boot code reorganizationMark A. Greer
This abstracts the operations used in the bootwrapper, and defines the operations needed for the bootwrapper to run on an OF platform. The operations have been divided up into platform ops (platform_ops), firmware ops (fw_ops), device tree ops (dt_ops), and console ops (console_ops). The proper operations will be hooked up at runtime to provide the functionality that you need. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-14[POWERPC] Fix MPC8349EMDS dts PCI interrupt-map values for IDSEL 0x18Kim Phillips
Fix MPC8349EMDS dts PCI interrupt-map values for IDSEL 0x18 per Tanya's catch. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-31Merge branch 'merge'Paul Mackerras
2006-08-30[POWERPC] Add mpc7448hpc2 device tree source fileZang Roy-r61911
This patch adds the mpc7448hpc2 device tree source file. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dtsKim Phillips
Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-25Merge branch 'merge'Paul Mackerras
2006-08-23[POWERPC] Fix FEC node in 8540 ADS dtsAndy Fleming
* Fixed the FEC node, and its accompanying PHY * Fixed a spacing issue in the PIC node Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23[POWERPC] Add 85xx DTS files to powerpcAndy Fleming
Added the mpc85xx family of dts files to the powerpc tree Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Fix the mpc8641_hpcn.dts file.Jon Loeliger
Add 'linux,phandle' entry to i8259@4d0 node. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Add MPC8641 HPCN Device Tree Source file.Jon Loeliger
As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-08[POWERPC] Add MPC8641 HPCN Device Tree Source file.Jon Loeliger
As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07[POWERPC] Add -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile.Niels Kristian Bech Jensen
I got some undefined references to __stack_chk_fail in arch/powerpc/boot/stdio.o and arch/powerpc/boot/prom.o when I was trying to build a kernel on Ubuntu Edgy Eft - which includes Stack Smashing Protection. This patch adds -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile (why does BOOTCFLAGS depend on HOSTCFLAGS and not CFLAGS?). Regards, Niels Kristian Bech Jensen Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
2006-06-22[PATCH] zlib_inflate: Upgrade library code to a recent versionRichard Purdie
Upgrade the zlib_inflate implementation in the kernel from a patched version 1.1.3/4 to a patched 1.2.3. The code in the kernel is about seven years old and I noticed that the external zlib library's inflate performance was significantly faster (~50%) than the code in the kernel on ARM (and faster again on x86_32). For comparison the newer deflate code is 20% slower on ARM and 50% slower on x86_32 but gives an approx 1% compression ratio improvement. I don't consider this to be an improvement for kernel use so have no plans to change the zlib_deflate code. Various changes have been made to the zlib code in the kernel, the most significant being the extra functions/flush option used by ppp_deflate. This update reimplements the features PPP needs to ensure it continues to work. This code has been tested on ARM under both JFFS2 (with zlib compression enabled) and ppp_deflate and on x86_32. JFFS2 sees an approx. 10% real world file read speed improvement. This patch also removes ZLIB_VERSION as it no longer has a correct value. We don't need version checks anyway as the kernel's module handling will take care of that for us. This removal is also more in keeping with the zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've added something to the zlib.h header to note its a modified version. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Joern Engel <joern@wh.fh-wedel.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>