aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kvm
AgeCommit message (Collapse)Author
2021-02-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: "x86: - take into account HVA before retrying on MMU notifier race - fixes for nested AMD guests without NPT - allow INVPCID in guest without PCID - disable PML in hardware when not in use - MMU code cleanups: * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: SVM: Fix nested VM-Exit on #GP interception handling KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created KVM: x86/mmu: Consider the hva in mmu_notifier retry KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID KVM: nSVM: prepare guest save area while is_guest_mode is true KVM: x86/mmu: Remove a variety of unnecessary exports KVM: x86: Fold "write-protect large" use case into generic write-protect KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging KVM: x86: Further clarify the logic and comments for toggling log dirty KVM: x86: Move MMU's PML logic to common code KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect() KVM: nVMX: Disable PML in hardware when running L2 KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs KVM: x86/mmu: Pass the memslot to the rmap callbacks KVM: x86/mmu: Split out max mapping level calculation to helper KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages KVM: nVMX: no need to undo inject_page_fault change on nested vmexit ...
2021-02-22Merge tag 'powerpc-5.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A large series adding wrappers for our interrupt handlers, so that irq/nmi/user tracking can be isolated in the wrappers rather than spread in each handler. - Conversion of the 32-bit syscall handling into C. - A series from Nick to streamline our TLB flushing when using the Radix MMU. - Switch to using queued spinlocks by default for 64-bit server CPUs. - A rework of our PCI probing so that it happens later in boot, when more generic infrastructure is available. - Two small fixes to allow 32-bit little-endian processes to run on 64-bit kernels. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun. * tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits) powerpc/perf: Adds support for programming of Thresholding in P10 powerpc/pci: Remove unimplemented prototypes powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user() powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size() powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user() powerpc/64: Fix stack trace not displaying final frame powerpc/time: Remove get_tbl() powerpc/time: Avoid using get_tbl() spi: mpc52xx: Avoid using get_tbl() powerpc/syscall: Avoid storing 'current' in another pointer powerpc/32: Handle bookE debugging in C in syscall entry/exit powerpc/syscall: Do not check unsupported scv vector on PPC32 powerpc/32: Remove the counter in global_dbcr0 powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry powerpc/syscall: implement system call entry/exit logic in C for PPC32 powerpc/32: Always save non volatile GPRs at syscall entry powerpc/syscall: Change condition to check MSR_RI powerpc/syscall: Save r3 in regs->orig_r3 powerpc/syscall: Use is_compat_task() powerpc/syscall: Make interrupt.c buildable on PPC32 ...
2021-02-22KVM: x86/mmu: Consider the hva in mmu_notifier retryDavid Stevens
Track the range being invalidated by mmu_notifier and skip page fault retries if the fault address is not affected by the in-progress invalidation. Handle concurrent invalidations by finding the minimal range which includes all ranges being invalidated. Although the combined range may include unrelated addresses and cannot be shrunk as individual invalidation operations complete, it is unlikely the marginal gains of proper range tracking are worth the additional complexity. The primary benefit of this change is the reduction in the likelihood of extreme latency when handing a page fault due to another thread having been preempted while modifying host virtual addresses. Signed-off-by: David Stevens <stevensd@chromium.org> Message-Id: <20210222024522.1751719-3-stevensd@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-11powerpc/xive: Assign boolean values to a bool variableJiapeng Chong
Fix the following coccicheck warnings: ./arch/powerpc/kvm/book3s_xive.c:1856:2-17: WARNING: Assignment of 0/1 to bool variable. ./arch/powerpc/kvm/book3s_xive.c:1854:2-17: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1612680192-43116-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-11KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guestsNicholas Piggin
Commit 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") incorrectly removed the radix host instruction patch to skip re-loading the host SLB entries when exiting from a hash guest. Restore it. Fixes: 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-11KVM: PPC: Book3S HV: Ensure radix guest has no SLB entriesPaul Mackerras
Commit 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") changed the older guest entry path, with the side effect that vcpu->arch.slb_max no longer gets cleared for a radix guest. This means that a HPT guest which loads some SLB entries, switches to radix mode, runs the guest using the old guest entry path (e.g., because the indep_threads_mode module parameter has been set to false), and then switches back to HPT mode would now see the old SLB entries being present, whereas previously it would have seen no SLB entries. To avoid changing guest-visible behaviour, this adds a store instruction to clear vcpu->arch.slb_max for a radix guest using the old guest entry path. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2Fabiano Rosas
These machines don't support running both MMU types at the same time, so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is using Radix MMU. [paulus@ozlabs.org - added defensive check on kvmppc_hv_ops->hash_v3_possible] Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Save and restore FSCR in the P9 pathFabiano Rosas
The Facility Status and Control Register is a privileged SPR that defines the availability of some features in problem state. Since it can be written by the guest, we must restore it to the previous host value after guest exit. This restoration is currently done by taking the value from current->thread.fscr, which in the P9 path is not enough anymore because the guest could context switch the QEMU thread, causing the guest-current value to be saved into the thread struct. The above situation manifested when running a QEMU linked against a libc with System Call Vectored support, which causes scv instructions to be run by QEMU early during the guest boot (during SLOF), at which point the FSCR is 0 due to guest entry. After a few scv calls (1 to a couple hundred), the context switching happens and the QEMU thread runs with the guest value, resulting in a Facility Unavailable interrupt. This patch saves and restores the host value of FSCR in the inner guest entry loop in a way independent of current->thread.fscr. The old way of doing it is still kept in place because it works for the old entry path. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./arch/powerpc/kvm/booke.c:701:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLBNicholas Piggin
IH=6 may preserve hypervisor real-mode ERAT entries and is the recommended SLBIA hint for switching partitions. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guestNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Fix radix guest SLB side channelNicholas Piggin
The slbmte instruction is legal in radix mode, including radix guest mode. This means radix guests can load the SLB with arbitrary data. KVM host does not clear the SLB when exiting a guest if it was a radix guest, which would allow a rogue radix guest to use the SLB as a side channel to communicate with other guests. Fix this by ensuring the SLB is cleared when coming out of a radix guest. Only the first 4 entries are a concern, because radix guests always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia is not used (except in a non-performance-critical path) because it can clear cached translations. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host ↵Nicholas Piggin
without mixed mode support This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix hosts"), which was required to run HPT guests on RPT hosts on early POWER9 CPUs without support for "mixed mode", which meant the host could not run with MMU on while guests were running. This code has some corner case bugs, e.g., when the guest hits a machine check or HMI the primary locks up waiting for secondaries to switch LPCR to host, which they never do. This could all be fixed in software, but most CPUs in production have mixed mode support, and those that don't are believed to be all in installations that don't use this capability. So simplify things and remove support. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWRRavi Bangoria
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether KVM supports 2nd DAWR or not. The capability is by default disabled even when the underlying CPU supports 2nd DAWR. QEMU needs to check and enable it manually to use the feature. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWRRavi Bangoria
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR. DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/ unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR. Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Rename current DAWR macros and variablesRavi Bangoria
Power10 is introducing a second DAWR (Data Address Watchpoint Register). Use real register names (with suffix 0) from ISA for current macros and variables used by kvm. One exception is KVM_REG_PPC_DAWR. Keep it as it is because it's uapi so changing it will break userspace. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-10KVM: PPC: Book3S HV: Allow nested guest creation when L0 hv_guest_state > L1Ravi Bangoria
On powerpc, L1 hypervisor takes help of L0 using H_ENTER_NESTED hcall to load L2 guest state in cpu. L1 hypervisor prepares the L2 state in struct hv_guest_state and passes a pointer to it via hcall. Using that pointer, L0 reads/writes that state directly from/to L1 memory. Thus L0 must be aware of hv_guest_state layout of L1. Currently it uses version field to achieve this. i.e. If L0 hv_guest_state.version != L1 hv_guest_state.version, L0 won't allow nested kvm guest. This restriction can be loosened up a bit. L0 can be taught to understand older layout of hv_guest_state, if we restrict the new members to be added only at the end, i.e. we can allow nested guest even when L0 hv_guest_state.version > L1 hv_guest_state.version. Though, the other way around is not possible. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2021-02-09powerpc/32s: Change mfsrin() into a static inline functionChristophe Leroy
mfsrin() is a macro. Change in into an inline function to avoid conflicts in KVM and make it more evolutive. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/72c7b9879e2e2e6f5c27dadda6486386c2b50f23.1612612022.git.christophe.leroy@csgroup.eu
2021-02-09powerpc: convert interrupt handlers to use wrappersNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-29-npiggin@gmail.com
2021-02-09KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqsNicholas Piggin
Interrupts that occur in kernel mode expect that context tracking is set to kernel. Enabling local irqs before context tracking switches from guest to host means interrupts can come in and trigger warnings about wrong context, and possibly worse. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-3-npiggin@gmail.com
2021-01-30powerpc/kvm: Force selection of CONFIG_PPC_FPUChristophe Leroy
book3s/32 kvm is designed with the assumption that an FPU is always present. Force selection of FPU support in the kernel when build KVM. Fixes: 7d68c8916950 ("powerpc/32s: Allow deselecting CONFIG_PPC_FPU on mpc832x") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/74461a99fa1466f361532ca794ca0753be3d9f86.1611038044.git.christophe.leroy@csgroup.eu
2021-01-30KVM: PPC: Book3S HV: Include prototypesCédric Le Goater
It fixes these W=1 compile errors : CC [M] arch/powerpc/kvm/book3s_64_mmu_hv.o ../arch/powerpc/kvm/book3s_64_mmu_hv.c:879:5: error: no previous prototype for ‘kvm_unmap_hva_range_hv’ [-Werror=missing-prototypes] 879 | int kvm_unmap_hva_range_hv(struct kvm *kvm, unsigned long start, unsigned long end) | ^~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:888:6: error: no previous prototype for ‘kvmppc_core_flush_memslot_hv’ [-Werror=missing-prototypes] 888 | void kvmppc_core_flush_memslot_hv(struct kvm *kvm, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:970:5: error: no previous prototype for ‘kvm_age_hva_hv’ [-Werror=missing-prototypes] 970 | int kvm_age_hva_hv(struct kvm *kvm, unsigned long start, unsigned long end) | ^~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:1011:5: error: no previous prototype for ‘kvm_test_age_hva_hv’ [-Werror=missing-prototypes] 1011 | int kvm_test_age_hva_hv(struct kvm *kvm, unsigned long hva) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/book3s_64_mmu_hv.c:1019:6: error: no previous prototype for ‘kvm_set_spte_hva_hv’ [-Werror=missing-prototypes] 1019 | void kvm_set_spte_hva_hv(struct kvm *kvm, unsigned long hva, pte_t pte) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-20-clg@kaod.org
2021-01-30KVM: PPC: Make the VMX instruction emulation routines staticCédric Le Goater
These are only used locally. It fixes these W=1 compile errors : ../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes] 1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes] 1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes] 1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes] 1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val) | ^~~~~~~~~~~~~~~~~~~ Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
2020-12-15KVM: PPC: Book3S HV: Fix mask size for emulated msgsndpLeonardo Bras
According to ISAv3.1 and ISAv3.0b, the msgsndp is described to split RB in: msgtype <- (RB) 32:36 payload <- (RB) 37:63 t <- (RB) 57:63 The current way of getting 'msgtype', and 't' is missing their MSB: msgtype: ((arg >> 27) & 0xf) : Gets (RB) 33:36, missing bit 32 t: (arg &= 0x3f) : Gets (RB) 58:63, missing bit 57 Fixes this by applying the correct mask. Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201208215707.31149-1-leobras.c@gmail.com
2020-12-15KVM: PPC: fix comparison to bool warningKaixu Xia
Fix the following coccicheck warning: ./arch/powerpc/kvm/booke.c:503:6-16: WARNING: Comparison to bool ./arch/powerpc/kvm/booke.c:505:6-17: WARNING: Comparison to bool ./arch/powerpc/kvm/booke.c:507:6-16: WARNING: Comparison to bool Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1604764178-8087-1-git-send-email-kaixuxia@tencent.com
2020-12-15KVM: PPC: Book3S: Assign boolean values to a bool variableKaixu Xia
Fix the following coccinelle warnings: ./arch/powerpc/kvm/book3s_xics.c:476:3-15: WARNING: Assignment of 0/1 to bool variable ./arch/powerpc/kvm/book3s_xics.c:504:3-15: WARNING: Assignment of 0/1 to bool variable Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1604730382-5810-1-git-send-email-kaixuxia@tencent.com
2020-12-11KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numberingCédric Le Goater
When the XIVE resources are allocated at the HW level, the VP structures describing the vCPUs of a guest are distributed among the chips to optimize the PowerBUS usage. For best performance, the guest vCPUs can be pinned to match the VP structure distribution. Currently, the VP identifiers are deduced from the vCPU id using the kvmppc_pack_vcpu_id() routine which is not incorrect but not optimal either. It VSMT is used, the result is not continuous and the constraints on HW resources described above can not be met. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-14-clg@kaod.org
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FWCédric Le Goater
This flag was used to support the P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Also, remove eoi handler which is now unused. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-11-clg@kaod.org
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FWCédric Le Goater
This flag was used to support the PHB4 LSIs on P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-10-clg@kaod.org
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUGCédric Le Goater
This flag was used to support the PHB4 LSIs on P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-9-clg@kaod.org
2020-12-11powerpc/xive: Rename XIVE_IRQ_NO_EOI to show its a flagCédric Le Goater
This is a simple cleanup to identify easily all flags of the XIVE interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI are the escalations used to wake up vCPUs in KVM. They are handled very differently from the rest. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-3-clg@kaod.org
2020-12-11KVM: PPC: Book3S HV: XIVE: Show detailed configuration in debug outputCédric Le Goater
This is useful to track allocation of the HW resources on per guest basis. Making sure IPIs are local to the chip of the vCPUs reduces rerouting between interrupt controllers and gives better performance in case of pinning. Checking the distribution of VP structures on the chips also helps in reducing PowerBUS traffic. [ clg: resurrected show_sources and reworked ouput ] Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201210171450.1933725-2-clg@kaod.org
2020-12-09powerpc/64s: Remove MSR[ISF] bitNicholas Piggin
No supported processor implements this mode. Setting the bit in MSR values can be a bit confusing (and would prevent the bit from ever being reused). Remove it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201106045340.1935841-1-npiggin@gmail.com
2020-12-04powerpc: Fix update form addressing in inline assemblyChristophe Leroy
In several places, inline assembly uses the "%Un" modifier to enable the use of instruction with update form addressing, but the associated "<>" constraint is missing. As mentioned in previous patch, this fails with gcc 4.9, so "<>" can't be used directly. Use UPD_CONSTR macro everywhere %Un modifier is used. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/62eab5ca595485c192de1765bdac099f633a21d0.1603358942.git.christophe.leroy@csgroup.eu
2020-12-04KVM: PPC: BOOK3S: PR: Ignore UAMOR SPRAneesh Kumar K.V
With power7 and above we expect the cpu to support keys. The number of keys are firmware controlled based on device tree. PR KVM do not expose key details via device tree. Hence when running with PR KVM we do run with MMU_FTR_KEY support disabled. But we can still get updates on UAMOR. Hence ignore access to them and for mfstpr return 0 indicating no AMR/IAMR update is no allowed. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201127044424.40686-3-aneesh.kumar@linux.ibm.com
2020-12-04KVM: PPC: Book3S HV: Ratelimit machine check messages coming from guestsNicholas Piggin
A number of machine check exceptions are triggerable by the guest. Ratelimit these to avoid a guest flooding the host console and logs. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use dedicated ratelimit state, not printk_ratelimit()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201128070728.825934-5-npiggin@gmail.com
2020-12-04KVM: PPC: Book3S HV: Don't attempt to recover machine checks for FWNMI ↵Nicholas Piggin
enabled guests Guests that can deal with machine checks would actually prefer the hypervisor not to try recover for them. For example if SLB multi-hits are recovered by the hypervisor by clearing the SLB then the guest will not be able to log the contents and debug its programming error. If guests don't register for FWNMI, they may not be so capable and so the hypervisor will continue to recover for those. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201128070728.825934-4-npiggin@gmail.com
2020-12-01KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity checkGreg Kurz
Commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") updated kvmppc_xive_vcpu_id_valid() in a way that allows userspace to trigger an assertion in skiboot and crash the host: [ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0 [ 696.186314757,0] Assert fail: hw/xive.c:2370:0 [ 696.186342458,0] Aborting! xive-kvCPU 0043 Backtrace: S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48 S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34 S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0 S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124 S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134 --- OPAL call token: 0x8a caller R1: 0xc000001f28563850 --- XIVE maintains the interrupt context state of non-dispatched vCPUs in an internal VP structure. We allocate a bunch of those on startup to accommodate all possible vCPUs. Each VP has an id, that we derive from the vCPU id for efficiency: static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server) { return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server); } The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was limitting the number of concurrent VMs because the VP space is limited on the HW. Since most of the time, VMs run with a lot less vCPUs, commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") gave the possibility for userspace to tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS attribute. The check in kvmppc_pack_vcpu_id() was changed from cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode to cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode The previous check was based on the fact that the VP block had KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the size of the VP block, but kvmppc_pack_vcpu_id() has nothing to do with it and it certainly doesn't ensure that the packed vCPU ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might thus return true when the VM was configured with a non-standard VSMT mode, even if the packed vCPU id is higher than what we expect. We end up using an unallocated VP id, which confuses OPAL. The assert in OPAL is probably abusive and should be converted to a regular error that the kernel can handle, but we shouldn't really use broken VP ids in the first place. Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed vCPU id is below xive->nr_servers, which is explicitly what we want. Fixes: 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
2020-11-25Merge branch 'fixes' into nextMichael Ellerman
Merge our fixes branch, in particular to bring in the changes for the entry/uaccess flush.
2020-11-19powerpc: Replace RFI by rfi on book3s/32 and bookeChristophe Leroy
For book3s/32 and for booke, RFI is just an rfi. Only 40x has a non trivial RFI. CONFIG_PPC_RTAS is never selected by 40x platforms. Make it more explicit by replacing RFI by rfi wherever possible. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b901ddfdeb8a0a3b7cb59999599cdfde1bbfe834.1604854583.git.christophe.leroy@csgroup.eu
2020-11-19powerpc/mm: Update tlbiel loop on POWER10Aneesh Kumar K.V
With POWER10, single tlbiel instruction invalidates all the congruence class of the TLB and hence we need to issue only one tlbiel with SET=0. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201007053305.232879-1-aneesh.kumar@linux.ibm.com
2020-11-16KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB pageCédric Le Goater
When accessing the ESB page of a source interrupt, the fault handler will retrieve the page address from the XIVE interrupt 'xive_irq_data' structure. If the associated KVM XIVE interrupt is not valid, that is not allocated at the HW level for some reason, the fault handler will dereference a NULL pointer leading to the oops below : WARNING: CPU: 40 PID: 59101 at arch/powerpc/kvm/book3s_xive_native.c:259 xive_native_esb_fault+0xe4/0x240 [kvm] CPU: 40 PID: 59101 Comm: qemu-system-ppc Kdump: loaded Tainted: G W --------- - - 4.18.0-240.el8.ppc64le #1 NIP: c00800000e949fac LR: c00000000044b164 CTR: c00800000e949ec8 REGS: c000001f69617840 TRAP: 0700 Tainted: G W --------- - - (4.18.0-240.el8.ppc64le) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44044282 XER: 00000000 CFAR: c00000000044b160 IRQMASK: 0 GPR00: c00000000044b164 c000001f69617ac0 c00800000e96e000 c000001f69617c10 GPR04: 05faa2b21e000080 0000000000000000 0000000000000005 ffffffffffffffff GPR08: 0000000000000000 0000000000000001 0000000000000000 0000000000000001 GPR12: c00800000e949ec8 c000001ffffd3400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c000001f5c065160 c000000001c76f90 GPR24: c000001f06f20000 c000001f5c065100 0000000000000008 c000001f0eb98c78 GPR28: c000001dcab40000 c000001dcab403d8 c000001f69617c10 0000000000000011 NIP [c00800000e949fac] xive_native_esb_fault+0xe4/0x240 [kvm] LR [c00000000044b164] __do_fault+0x64/0x220 Call Trace: [c000001f69617ac0] [0000000137a5dc20] 0x137a5dc20 (unreliable) [c000001f69617b50] [c00000000044b164] __do_fault+0x64/0x220 [c000001f69617b90] [c000000000453838] do_fault+0x218/0x930 [c000001f69617bf0] [c000000000456f50] __handle_mm_fault+0x350/0xdf0 [c000001f69617cd0] [c000000000457b1c] handle_mm_fault+0x12c/0x310 [c000001f69617d10] [c00000000007ef44] __do_page_fault+0x264/0xbb0 [c000001f69617df0] [c00000000007f8c8] do_page_fault+0x38/0xd0 [c000001f69617e30] [c00000000000a714] handle_page_fault+0x18/0x38 Instruction dump: 40c2fff0 7c2004ac 2fa90000 409e0118 73e90001 41820080 e8bd0008 7c2004ac 7ca90074 39400000 915c0000 7929d182 <0b090000> 2fa50000 419e0080 e89e0018 ---[ end trace 66c6ff034c53f64f ]--- xive-kvm: xive_native_esb_fault: accessing invalid ESB page for source 8 ! Fix that by checking the validity of the KVM XIVE interrupt structure. Fixes: 6520ca64cde7 ("KVM: PPC: Book3S HV: XIVE: Add a mapping for the source ESB pages") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201105134713.656160-1-clg@kaod.org
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
2020-10-21KVM: PPC: Book3S HV: Make struct kernel_param_ops definition constJoe Perches
This should be const, so make it so. Signed-off-by: Joe Perches <joe@perches.com> Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-16Merge tag 'powerpc-5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...
2020-10-13KVM: PPC: Book3S HV: simplify kvm_cma_reserve()Mike Rapoport
Patch series "memblock: seasonal cleaning^w cleanup", v3. These patches simplify several uses of memblock iterators and hide some of the memblock implementation details from the rest of the system. This patch (of 17): The memory size calculation in kvm_cma_reserve() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lkml.kernel.org/r/20200818151634.14343-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20200818151634.14343-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/memremap_pages: support multiple ranges per invocationDan Williams
In support of device-dax growing the ability to front physically dis-contiguous ranges of memory, update devm_memremap_pages() to track multiple ranges with a single reference counter and devm instance. Convert all [devm_]memremap_pages() users to specify the number of ranges they are mapping in their 'struct dev_pagemap' instance. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Jérôme Glisse" <jglisse@redhat.co Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: kernel test robot <lkp@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/159643103789.4062302.18426128170217903785.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/160106116293.30709.13350662794915396198.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/memremap_pages: convert to 'struct range'Dan Williams
The 'struct resource' in 'struct dev_pagemap' is only used for holding resource span information. The other fields, 'name', 'flags', 'desc', 'parent', 'sibling', and 'child' are all unused wasted space. This is in preparation for introducing a multi-range extension of devm_memremap_pages(). The bulk of this change is unwinding all the places internal to libnvdimm that used 'struct resource' unnecessarily, and replacing instances of 'struct dev_pagemap'.res with 'struct dev_pagemap'.range. P2PDMA had a minor usage of the resource flags field, but only to report failures with "%pR". That is replaced with an open coded print of the range. [dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()] Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen] Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: kernel test robot <lkp@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/159643103173.4062302.768998885691711532.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/160106115761.30709.13539840236873663620.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>