| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
|
|
The following build failure occurs when CONFIG_PERF_EVENTS is not set
as generic pmu functions are not visible in that scenario.
arch/powerpc/platforms/pseries/papr_scm.c:372:35: error: ‘struct perf_event’ has no member named ‘attr’
p->nvdimm_events_map[event->attr.config],
^~
In file included from ./include/linux/list.h:5,
from ./include/linux/kobject.h:19,
from ./include/linux/of.h:17,
from arch/powerpc/platforms/pseries/papr_scm.c:5:
arch/powerpc/platforms/pseries/papr_scm.c: In function ‘papr_scm_pmu_event_init’:
arch/powerpc/platforms/pseries/papr_scm.c:389:49: error: ‘struct perf_event’ has no member named ‘pmu’
struct nvdimm_pmu *nd_pmu = to_nvdimm_pmu(event->pmu);
^~
./include/linux/container_of.h:18:26: note: in definition of macro ‘container_of’
void *__mptr = (void *)(ptr); \
^~~
arch/powerpc/platforms/pseries/papr_scm.c:389:30: note: in expansion of macro ‘to_nvdimm_pmu’
struct nvdimm_pmu *nd_pmu = to_nvdimm_pmu(event->pmu);
^~~~~~~~~~~~~
In file included from ./include/linux/bits.h:22,
from ./include/linux/bitops.h:6,
from ./include/linux/of.h:15,
from arch/powerpc/platforms/pseries/papr_scm.c:5:
Fix the build issue by adding check for CONFIG_PERF_EVENTS config option
and also add stub function for papr_scm_pmu_register to handle
the CONFIG_PERF_EVENTS=n case. Also move the position of macro
"to_nvdimm_pmu" inorder to merge it in CONFIG_PERF_EVENTS=y block.
based on libnvdimm-for-next tree)
Fixes: 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support") (Commit id
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20220323164550.109768-2-kjain@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr"
#0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc
#1 [c0000000e4f075d0] oops_end at c000000000029608
#2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4
#3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8
#4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30
Data SLB Access [380] exception frame:
R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100
R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9
R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff
R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000
R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000
R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003
R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005
R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0
R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8
R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800
R30: c00000004d1d2400 R31: c00000004d1d2540
NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474
CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003
CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3
DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2
[NIP : release_resource+56]
[LR : release_resource+48]
#5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable)
#6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648
#7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io]
#8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io]
#9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c
#10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504
#11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868
#12 [c0000000e4f07c70] new_sync_write at c00000000054339c
#13 [c0000000e4f07d10] vfs_write at c000000000546624
#14 [c0000000e4f07d60] ksys_write at c0000000005469f4
#15 [c0000000e4f07db0] system_call_exception at c000000000030840
#16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes: 2dd9c11b9d4d ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)")
Reported-by: David Dai <zdai@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au
|
|
Performance monitoring support for papr-scm nvdimm devices
via perf interface is added which includes addition of pmu
functions like add/del/read/event_init for nvdimm_pmu struture.
A new parameter 'priv' in added to the pdev_archdata structure to save
nvdimm_pmu device pointer, to handle the unregistering of pmu device.
papr_scm_pmu_register function populates the nvdimm_pmu structure
with name, capabilities, cpumask along with event handling
functions. Finally the populated nvdimm_pmu structure is passed to
register the pmu device. Event handling functions internally uses
hcall to get events and counter data.
Result in power9 machine with 2 nvdimm device:
Ex: List all event by perf list
command:# perf list nmem
nmem0/cache_rh_cnt/ [Kernel PMU event]
nmem0/cache_wh_cnt/ [Kernel PMU event]
nmem0/cri_res_util/ [Kernel PMU event]
nmem0/ctl_res_cnt/ [Kernel PMU event]
nmem0/ctl_res_tm/ [Kernel PMU event]
nmem0/fast_w_cnt/ [Kernel PMU event]
nmem0/host_l_cnt/ [Kernel PMU event]
nmem0/host_l_dur/ [Kernel PMU event]
nmem0/host_s_cnt/ [Kernel PMU event]
nmem0/host_s_dur/ [Kernel PMU event]
nmem0/med_r_cnt/ [Kernel PMU event]
nmem0/med_r_dur/ [Kernel PMU event]
nmem0/med_w_cnt/ [Kernel PMU event]
nmem0/med_w_dur/ [Kernel PMU event]
nmem0/mem_life/ [Kernel PMU event]
nmem0/poweron_secs/ [Kernel PMU event]
...
nmem1/mem_life/ [Kernel PMU event]
nmem1/poweron_secs/ [Kernel PMU event]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[Add numa_map_to_online_node function call to get online node id]
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@in.ibm.com>
Link: https://lore.kernel.org/r/20220225143024.47947-4-kjain@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
mpc8xx_pic_init() should return -ENOMEM instead of 0 when
irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue
executing even if mpc8xx_pic_host is NULL.
Fixes: cc76404feaed ("powerpc/8xx: Fix possible device node reference leak")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220223070223.26845-1-hbh25y@gmail.com
|
|
Eliminate the following coccicheck warnings:
./arch/powerpc/platforms/ps3/system-bus.c:606:2-3: Unneeded semicolon
./arch/powerpc/platforms/ps3/system-bus.c:765:2-3: Unneeded semicolon
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/01647102607ce9640c9f27786d976109a3c4ea7e.1629197153.git.jing.yangyang@zte.com.cn
|
|
Inspired by (bd75b4ef4977: Constify static attribute_group structs),
accepted by linux-next, reported:
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20220210202805.7750-4-rikard.falkeborn@gmail.com/
Nearly all singletons of type struct attribute_group are never modified,
and so are candidates for being const. Declare them as const.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220307231414.86560-1-rmclure@linux.ibm.com
|
|
arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function]
static int show_spu_loadavg(struct seq_file *s, void *private)
^~~~~~~~~~~~~~~~
Move it into #ifdef block to fix this, also remove unneeded semicolon.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308100928.23540-1-yuehaibing@huawei.com
|
|
Since the IBM A2 CPU support was removed, see commit
fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"),
the only 64-bit Book3E CPUs we support are Freescale (NXP) ones.
However our Kconfig still allows configurating a kernel that has 64-bit
Book3E support, but no Freescale CPU support enabled. Such a kernel
would never boot, it doesn't know about any CPUs.
It also causes build errors, as reported by lkp, because
PPC_BARRIER_NOSPEC is not enabled in such a configuration:
powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0):
undefined reference to `powerpc_security_features'
To fix this, force PPC_FSL_BOOK3E to be selected whenever we are
building a 64-bit Book3E kernel.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220304061222.2478720-1-mpe@ellerman.id.au
|
|
We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc:
Introduce asm-prototypes.h"). It's purpose was for prototypes of C
functions that are only called from asm, in order to fix sparse
warnings about missing prototypes.
A few months later Nick added a different use case in
commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
for C prototypes for exported asm functions. This is basically the
inverse of our original usage.
Since then we've added various prototypes to asm-prototypes.h for both
reasons, meaning we now need to unstitch it all.
Dispatch prototypes of C functions into relevant headers and keep
only the prototypes for functions defined in assembly.
For the time being, leave prom_init() there because moving it
into asm/prom.h or asm/setup.h conflicts with
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
This will be fixed later by untaggling asm/pci.h and asm/prom.h
or by renaming the function in shadowrom.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
|
|
Adds a syscall interface to represent the energy and frequency related
PAPR attributes on the system using the new H_CALL
"H_GET_ENERGY_SCALE_INFO".
H_GET_EM_PARMS H_CALL was previously responsible for exporting this
information in the lparcfg, however the H_GET_EM_PARMS H_CALL
will be deprecated P10 onwards.
The H_GET_ENERGY_SCALE_INFO H_CALL is of the following call format:
hcall(
uint64 H_GET_ENERGY_SCALE_INFO, // Get energy scale info
uint64 flags, // Per the flag request
uint64 firstAttributeId,// The attribute id
uint64 bufferAddress, // Guest physical address of the output buffer
uint64 bufferSize // The size in bytes of the output buffer
);
As specified in PAPR+ v2.11, section 14.14.3.
This H_CALL can query either all the attributes at once with
firstAttributeId = 0, flags = 0 as well as query only one attribute
at a time with firstAttributeId = id, flags = 1.
The output buffer consists of the following
1. number of attributes - 8 bytes
2. array offset to the data location - 8 bytes
3. version info - 1 byte
4. A data array of size num attributes, which contains the following:
a. attribute ID - 8 bytes
b. attribute value in number - 8 bytes
c. attribute name in string - 64 bytes
d. attribute value in string - 64 bytes
The new H_CALL exports information in direct string value format, hence
a new interface has been introduced in
/sys/firmware/papr/energy_scale_info to export this information to
userspace so that the firmware can add new values without the need for
the kernel to be changed.
The H_CALL returns the name, numeric value and string value (if exists)
The format of exposing the sysfs information is as follows:
/sys/firmware/papr/energy_scale_info/
|-- <id>/
|-- desc
|-- value
|-- value_desc (if exists)
|-- <id>/
|-- desc
|-- value
|-- value_desc (if exists)
...
The energy information that is exported is useful for userspace tools
such as powerpc-utils. Currently these tools infer the
"power_mode_data" value in the lparcfg, which in turn is obtained from
the to be deprecated H_GET_EM_PARMS H_CALL.
On future platforms, such userspace utilities will have to look at the
data returned from the new H_CALL being populated in this new sysfs
interface and report this information directly without the need of
interpretation.
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220217105321.52941-2-psampat@linux.ibm.com
|
|
In realmode mce handler we use irq_work_queue() to defer
the processing of mce events, irq_work_queue() can only
be called when translation is enabled because it touches
memory outside RMA, hence we enable translation before
calling irq_work_queue and disable on return, though it
is not safe to do in realmode.
To avoid this, program the decrementer and call the event
processing functions from timer handler.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220120121931.517974-1-ganeshgr@linux.ibm.com
|
|
Add support to parse and log control memory access
error for pseries. These changes are made according to
PAPR v2.11 10.3.2.2.12.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220107141428.67862-1-ganeshgr@linux.ibm.com
|
|
Since the VAS windows belong to the VAS hardware resource, the
hypervisor expects the partition to close them on source partition
and reopen them after the partition migrated on the destination
machine.
This handler is called before pseries_suspend() to close these
windows and again invoked after migration. All active windows
for both default and QoS types will be closed and mark them
inactive and reopened after migration with this handler.
During the migration, the user space receives paste instruction
failure if it issues copy/paste on these inactive windows.
The current migration implementation does not freeze the user
space and applications can continue to open VAS windows while
migration is in progress. So when the migration_in_progress flag
is set, VAS open window API returns -EBUSY.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05e45ff4f8babd2490ccb7ae923884f4aa21a7e5.camel@linux.ibm.com
|
|
VAS is a hardware engine stays on the chip. So when the partition
migrates, all VAS windows on the source system have to be closed
and reopen them on the destination after migration.
The kernel has to consider both DLPAR CPU and migration events to
take action on VAS windows. So using VAS_WIN_NO_CRED_CLOSE and
VAS_WIN_MIGRATE_CLOSE status bits and windows will be reopened
after migration only after both status bits are cleared.
This patch make changes to the current reconfig_open/close_windows
functions to support migration:
- Set VAS_WIN_MIGRATE_CLOSE to the window status when closes and
reopen windows with the same status during resume.
- Continue to close all windows even if deallocate HCALL failed
(should not happen) since no way to stop migration with the
current LPM implementation.
- If the DLPAR CPU event happens while migration is in progress,
set VAS_WIN_NO_CRED_CLOSE to the window status. Close window
happens with the first event (migration or DLPAR) and Reopen
window happens only with the last event (migration or DLPAR).
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0aad580387cb58379496b4cbbd7c5596e9ea70be.camel@linux.ibm.com
|
|
The coprocessor capabilities struct is used to get default and
QoS capabilities from the hypervisor during init, DLPAR event and
migration. So instead of allocating this struct for each event,
define global struct and reuse it which allows the migration code
to avoid adding an error path.
Also disable copy/paste feature flag if any capabilities HCALL
is failed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57da6a270fcb9308cd57be7c88037029343080f7.camel@linux.ibm.com
|
|
pseries supports two types of credits - Default (uses normal priority
FIFO) and Qality of service (QoS uses high priority FIFO). The user
decides the number of QoS credits and sets this value with HMC
interface. The total credits for QoS capabilities can be changed
dynamically with HMC interface which invokes drmgr to communicate
to the kernel.
This patch creats 'update_total_credits' entry for QoS capabilities
so that drmgr command can write the new target QoS credits in sysfs.
Instead of using this value, the kernel gets the new QoS capabilities
from the hypervisor whenever update_total_credits is updated to make
sure sync with the QoS target credits in the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b01ef31a0f964686d00243e7de7f09c73c07e69e.camel@linux.ibm.com
|
|
The hypervisor provides the available VAS GZIP capabilities such
as default or QoS window type and the target available credits in
each type. This patch creates sysfs entries and exports the target,
used and the available credits for each feature.
This interface can be used by the user space to determine the credits
usage or to set the target credits in the case of QoS type (for DLPAR).
/sys/devices/vas/vas0/gzip/default_capabilities (default GZIP capabilities)
nr_total_credits /* Total credits available. Can be
/* changed with DLPAR operation */
nr_used_credits /* Used credits */
/sys/devices/vas/vas0/gzip/qos_capabilities (QoS GZIP capabilities)
nr_total_credits
nr_used_credits
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/702d8b626ebfac2b52f4995eebeafe1c9a6fcb75.camel@linux.ibm.com
|
|
VAS windows can be closed in the hypervisor due to lost credits
when the core is removed and the kernel gets fault for NX
requests on these inactive windows. If the NX requests are
issued on these inactive windows, OS gets page faults and the
paste failure will be returned to the user space. If the lost
credits are available later with core add, reopen these windows
and set them active. Later when the OS sees page faults on these
active windows, it creates mapping on the new paste address.
Then the user space can continue to use these windows and send
HW compression requests to NX successfully.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9f360e21355e6826142c81146acfa9b60bc7ecc.camel@linux.ibm.com
|
|
The hypervisor assigns vas credits (windows) for each LPAR based
on the number of cores configured in that system. The OS is
expected to release credits when cores are removed, and may
allocate more when cores are added. So there is a possibility of
using excessive credits (windows) in the LPAR and the hypervisor
expects the system to close the excessive windows so that NX load
can be equally distributed across all LPARs in the system.
When the OS closes the excessive windows in the hypervisor,
it sets the window status inactive and invalidates window
virtual address mapping. The user space receives paste instruction
failure if any NX requests are issued on the inactive window.
Then the user space can use with the available open windows or
retry NX requests until this window active again.
This patch also adds the notifier for core removal/add to close
windows in the hypervisor if the system lost credits (core
removal) and reopen windows in the hypervisor when the previously
lost credits are available.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/108928f9c00a48cc6a722315d482d07cf66acf5a.camel@linux.ibm.com
|
|
The paste address mapping is done with mmap() after the window is
opened with ioctl. The partition has to close VAS windows in the
hypervisor if it lost credits due to DLPAR core removal. But the
kernel marks these windows inactive until the previously lost
credits are available later. If the window is inactive due to
DLPAR after this mmap(), the paste instruction returns failure
until the the OS reopens this window again.
Before the user space issuing mmap(), there is a possibility of
happening DLPAR core removal event which causes the corresponding
window inactive. So if the window is not active, return mmap()
failure with -EACCES and expects the user space reissue mmap()
when the window is active or open a new window when the credit
is available.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bbb203c26b324534e25658cb1dbbcb5160a2f93a.camel@linux.ibm.com
|
|
The VAS window may not be active if the system looses credits and
the NX generates page fault when it receives request on unmap
paste address.
The kernel handles the fault by remap new paste address if the
window is active again, Otherwise return the paste instruction
failure if the executed instruction that caused the fault was
a paste.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/492b9aefd593061d51dda67ee4d2fc449c000dce.camel@linux.ibm.com
|
|
The user space opens VAS windows and issues NX requests by pasting
CRB on the corresponding paste address mmap. When the system lost
credits due to core removal, the kernel has to close the window in
the hypervisor and make the window inactive by unmapping this paste
address. Also the OS has to handle NX request page faults if the user
space issue NX requests.
This handler maps the new paste address with the same VMA when the
window is active again (due to core add with DLPAR). Otherwise
returns paste failure.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3956e1c1fdfde69127055ff1c0256c7d71104030.camel@linux.ibm.com
|
|
The kernel sets the VAS window with PID when it is opened in
the hypervisor. During DLPAR operation, windows can be closed and
reopened in the hypervisor when the credit is available. So saves
this PID in pseries_vas_window struct when the window is opened
initially and reuse it later during DLPAR operation.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a57cbe6d292fe49ad55a0b49c5679d6a24d8fe73.camel@linux.ibm.com
|
|
nr_total/nr_used_credits provides credits usage to user space
via sysfs and the same interface can be used on PowerNV in
future. Changed with proper naming so that applicable on both
pseries and PowerNV.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f4313e9f198ee4f8d4fa4d015d8d1873e17851e6.camel@linux.ibm.com
|
|
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
|
|
Add these PCI class codes to pci_ids.h:
PCI_CLASS_BRIDGE_PCI_NORMAL
PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE
Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.
[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Presently PAPR doesn't support injecting smart errors on an
NVDIMM. This makes testing the NVDIMM health reporting functionality
difficult as simulating NVDIMM health related events need a hacked up
qemu version.
To solve this problem this patch proposes simulating certain set of
NVDIMM health related events in papr_scm. Specifically 'fatal' health
state and 'dirty' shutdown state. These error can be injected via the
user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
corresponding ndctl patches following command flow is expected:
$ sudo ndctl list -DH -d nmem0
...
"health_state":"ok",
"shutdown_state":"clean",
...
# inject unsafe shutdown and fatal health error
$ sudo ndctl inject-smart nmem0 -Uf
...
"health_state":"fatal",
"shutdown_state":"dirty",
...
# uninject all errors
$ sudo ndctl inject-smart nmem0 -N
...
"health_state":"ok",
"shutdown_state":"clean",
...
The patch adds a new member 'health_bitmap_inject_mask' inside struct
papr_scm_priv which is then bitwise ANDed to the health bitmap fetched from the
hypervisor. The value for 'health_bitmap_inject_mask' is accessible from sysfs
at nmemX/papr/health_bitmap_inject.
A new PDSM named 'SMART_INJECT' is proposed that accepts newly
introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
exchanged between libndctl and papr_scm to indicate the requested
smart-error states.
When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
constructs a pair or 'inject_mask' and 'clear_mask' bitmaps from the payload
and bit-blt it to the 'health_bitmap_inject_mask'. This ensures the after being
fetched from the hypervisor, the health_bitmap reflects requested smart-error
states.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124202204.1488346-1-vaibhav@linux.ibm.com
|
|
pseries_devicetree_update() has only one call site, in the same file in
which it is defined. Make it static.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220207221247.354454-1-nathanl@linux.ibm.com
|
|
Don't use ppc_md function comparison.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c8ef82ee5f2713f4c36eb5d2d49b0905c7472801.1630667612.git.christophe.leroy@csgroup.eu
|
|
Comment says "Delete this in 2.6.27".
Do so now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a47bb6a69c68156bc2d555152dab5a23733856b7.1630667612.git.christophe.leroy@csgroup.eu
|
|
sys_ctrler_t definitions are tied to pmac. Move it into pmac_feature.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Move to pmac_feature.h to fix some build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7dd5ead4bbca749e2da089ff6fe2b1878d6bf40e.1630667612.git.christophe.leroy@csgroup.eu
|
|
Other uses of &gang->aff_list_head, eg in spufs_assert_affinity, indicate
that the list elements have type spu_context, not spu as used here. Change
the type of tmp accordingly.
This has no impact on the execution, because tmp is not used in the body of
the loop.
Fixes: c5fc8d2a92461 ("[CELL] cell: add placement computation for scheduling of affinity contexts")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1588929176-28527-1-git-send-email-Julia.Lawall@inria.fr
|
|
The LPAR name may be changed after the LPAR has been started in the HMC.
In that case lparstat command is not reporting the updated value because
it reads it from the device tree which is read at boot time.
However this value could be read from RTAS.
Adding this value in the /proc/powerpc/lparcfg output allows to read the
updated value.
However the hypervisor, like Qemu/KVM, may not support this RTAS
parameter. In that case the value reported in lparcfg is read from the
device tree and so is not updated accordingly.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop doc-comment syntax, change RTAS/DT to lower case, use of_root
to fix missing of_node_put(), use of_property_read_string()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220106161339.74656-1-ldufour@linux.ibm.com
|
|
This means an idle guest won't needlessly consume an entire core on
the host, waiting for work to show up.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220112112459.1033754-1-troglobit@gmail.com
|
|
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
|
|
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the powerpc opal dump and elog sysfs code to use
default_groups field which has been the preferred way since aa30f47cf666
("kobject: Add support for default attribute groups to kobj_type") so
that we can soon get rid of the obsolete default_attrs field.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220104161318.1306023-1-gregkh@linuxfoundation.org
|
|
The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).
LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
|
|
Make `find_via_cuda` and `find_via_pmu` initialization functions.
Previously, their definitions in `drivers/macintosh/via-cuda.h` include
the `__init` attribute but their alternative definitions in
`arch/powerpc/powermac/sectup./c` and prototypes in `include/linux/
cuda.h` and `include/linux/pmu.h` do not use the `__init` macro. Since,
only initialization functions call `find_via_cuda` and `find_via_pmu`
it is safe to label these functions with `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-21-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/512x' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-20-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/85xx' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-19-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/83xx' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-18-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/embedded6xx' are
deserving of an `__init` macro attribute. These functions are only
called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-17-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/44x/' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-16-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/4xx' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-15-nick.child@ibm.com
|
|
Some functions defined in 'arch/powerpc/platforms/ps3' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-14-nick.child@ibm.com
|
