aboutsummaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)Author
2018-05-30s390/net: add pnetid supportUrsula Braun
s390 hardware supports the definition of a so-call Physical NETwork IDentifier (short PNETID) per network device port. These PNETIDS can be used to identify network devices that are attached to the same physical network (broadcast domain). This patch provides the interface to extract the PNETID of a port of a device attached to the ccw-bus or pci-bus. Parts of this patch are based on an initial implementation by Thomas Richter. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/cio: add test for ccwgroup deviceSebastian Ott
Add a test to check if a given device is a ccwgroup device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/cio: add helper to query utility strings per given ccw deviceSebastian Ott
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390: remove no-op macro VMLINUX_SYMBOL()Masahiro Yamada
VMLINUX_SYMBOL() is no-op unless CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX is defined. It has ever been selected only by BLACKFIN and METAG. VMLINUX_SYMBOL() is unneeded for s390-specific code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390: remove closung punctuation from spectre messagesMartin Schwidefsky
There should not be a '.' at the end of the spectre syslog messages. Remove them. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390: introduce compile time check for empty .bss sectionVasily Gorbik
Introduce compile time check for files which should avoid using .bss section, because of the following reasons: - .bss section has not been zeroed yet, - initrd has not been moved to a safe location and could be overlapping with .bss section. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390/early: move functions which may not access bss section to extra fileHeiko Carstens
Move functions which may not access bss section to extra file. This makes it easier to verify that all early functions which may not rely on an initialized bss section are not accessing it. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390/early: get rid of #ifdef CONFIG_BLK_DEV_INITRDHeiko Carstens
Use IS_ENABLED to get rid of an #ifdef statement. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390/early: get rid of memmove_earlyHeiko Carstens
memmove_early was introduced with commit d543a106f96d6 ("s390: fix initrd corruptions with gcov/kcov instrumented kernels"). The reason for writing this extra memmove implementation was to be able to move memory from an unknown location (aka SCSI IPL parameter block) to a known location. This had to done early before it was known if the SCSI IPL parameter block pointer was valid or not, and therefore the memmove implementation was supposed to be able to handle program checks. The code has been changed and especially with commit d08091ac9654 ("s390/ipl: rely on diag308 store to get ipl info") and commit b4623d4e5b23 ("s390: provide memmove implementation") there is no need to have a memmove version that can handle program checks, and in addition it cannot be gcov/kcov instrumented anymore. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09s390/cpum_sf: Add data entry sizes to sampling trailer entryThomas Richter
The CPU Measurement sampling facility creates a trailer entry for each Sample-Data-Block of stored samples. The trailer entry contains the sizes (in bytes) of the stored sampling types: - basic-sampling data entry size - diagnostic-sampling data entry size Both sizes are 2 bytes long. This patch changes the trailer entry definition to reflect this. Fixes: fcc77f507333 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-09perf: fix invalid bit in diagnostic entryThomas Richter
The s390 CPU measurement facility sampling mode supports basic entries and diagnostic entries. Each entry has a valid bit to indicate the status of the entry as valid or invalid. This bit is bit 31 in the diagnostic entry, but the bit mask definition refers to bit 30. Fix this by making the reserved field one bit larger. Fixes: 7e75fc3ff4cf ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-08s390/cpum_sf: ensure sample frequency of perf event attributes is non-zeroHendrik Brueckner
Correct a trinity finding for the perf_event_open() system call with a perf event attribute structure that uses a frequency but has the sampling frequency set to zero. This causes a FP divide exception during the sample rate initialization for the hardware sampling facility. Fixes: 8c069ff4bd606 ("s390/perf: add support for the CPU-Measurement Sampling Facility") Cc: stable@vger.kernel.org # 3.14+ Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390: use expoline thunks in the BPF JITMartin Schwidefsky
The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx assembler stubs and the indirect branches generated by the JIT itself need to be converted to expolines. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390: extend expoline to BC instructionsMartin Schwidefsky
The BPF JIT uses a 'b <disp>(%r<x>)' instruction in the definition of the sk_load_word and sk_load_half functions. Add support for branch-on-condition instructions contained in the thunk code of an expoline. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390: remove indirect branch from do_softirq_own_stackMartin Schwidefsky
The inline assembly to call __do_softirq on the irq stack uses an indirect branch. This can be replaced with a normal relative branch. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390: move spectre sysfs attribute codeMartin Schwidefsky
The nospec-branch.c file is compiled without the gcc options to generate expoline thunks. The return branch of the sysfs show functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect branch as well. These need to be compiled with expolines. Move the sysfs functions for spectre reporting to a separate file and loose an '.' for one of the messages. Cc: stable@vger.kernel.org # 4.16 Fixes: d424986f1d ("s390: add sysfs attributes for spectre") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390/kernel: use expoline for indirect branchesMartin Schwidefsky
The assember code in arch/s390/kernel uses a few more indirect branches which need to be done with execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390/ftrace: use expoline for indirect branchesMartin Schwidefsky
The return from the ftrace_stub, _mcount, ftrace_caller and return_to_handler functions is done with "br %r14" and "br %r1". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. The ftrace_caller function is a special case as it returns to the start of a function and may only use %r0 and %r1. For a pre z10 machine the standard execute trampoline uses a LARL + EX to do this, but this requires *two* registers in the range %r1..%r15. To get around this the 'br %r1' located in the lowcore is used, then the EX instruction does not need an address register. But the lowcore trick may only be used for pre z14 machines, with noexec=on the mapping for the first page may not contain instructions. The solution for that is an ALTERNATIVE in the expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to EXRL, this relies on the fact that a machine that supports noexec=on has EXRL as well. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390/lib: use expoline for indirect branchesMartin Schwidefsky
The return from the memmove, memset, memcpy, __memset16, __memset32 and __memset64 functions are done with "br %r14". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390/crc32-vx: use expoline for indirect branchesMartin Schwidefsky
The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the crc32_be_vgfm_16 functions are done with "br %r14". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-07s390: move expoline assembler macros to a headerMartin Schwidefsky
To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-27s390/kexec_file: add declaration of purgatory related globalsSebastian Ott
Fix the following sparse complaints: arch/s390/purgatory/purgatory.c:18:5: warning: symbol 'kernel_entry' was not declared. Should it be static? arch/s390/purgatory/purgatory.c:19:5: warning: symbol 'kernel_type' was not declared. Should it be static? arch/s390/purgatory/purgatory.c:21:5: warning: symbol 'crash_start' was not declared. Should it be static? arch/s390/purgatory/purgatory.c:22:5: warning: symbol 'crash_size' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-27s390: update defconfigsSebastian Ott
Change the following to y: arch/s390/configs/performance_defconfig:262:warning: symbol value 'm' invalid for NF_TABLES_IPV4 arch/s390/configs/performance_defconfig:264:warning: symbol value 'm' invalid for NF_TABLES_ARP arch/s390/configs/performance_defconfig:285:warning: symbol value 'm' invalid for NF_TABLES_IPV6 arch/s390/configs/performance_defconfig:306:warning: symbol value 'm' invalid for NF_TABLES_BRIDGE Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23s390: correct module section names for expoline code revertMartin Schwidefsky
The main linker script vmlinux.lds.S for the kernel image merges the expoline code patch tables into two section ".nospec_call_table" and ".nospec_return_table". This is *not* done for the modules, there the sections retain their original names as generated by gcc: ".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg". The module_finalize code has to check for the compiler generated section names, otherwise no code patching is done. This slows down the module code in case of "spectre_v2=off". Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23s390: update sampling tag after task pid changeMartin Schwidefsky
In a multi-threaded program any thread can call execve(). If this is not done by the thread group leader, the de_thread() function replaces the pid of the task that calls execve() with the pid of thread group leader. If the task reaches user space again without going over __switch_to() the sampling tag is still set to the old pid. Define the arch_setup_new_exec function to verify the task pid and udpate the tag with LPP if it has changed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23s390/cpum_cf: rename IBM z13/z14 counter namesAndré Wild
Change the IBM z13/z14 counter names to be in sync with all other models. Cc: stable@vger.kernel.org # v4.12+ Fixes: 3593eb944c ("s390/cpum_cf: add hardware counter support for IBM z14") Fixes: 3fc7acebae ("s390/cpum_cf: add IBM z13 counter event names") Signed-off-by: André Wild <wild@linux.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23s390/uprobes: implement arch_uretprobe_is_alive()Heiko Carstens
Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs observed with uretprobes in combination with setjmp/longjmp. See commit 2dea1d9c38e4 ("powerpc/uprobes: Implement arch_uretprobe_is_alive()") for more details. With this implemented all test cases referenced in the above commit pass. Reported-by: Ziqian SUN <zsun@redhat.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes. Some of that is only a matter with fault injection (broken handling of small allocation failure in various mount-related places), but the last one is a root-triggerable stack overflow, and combined with userns it gets really nasty ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Don't leak MNT_INTERNAL away from internal mounts mm,vmscan: Allow preallocating memory for register_shrinker(). rpc_pipefs: fix double-dput() orangefs_kill_sb(): deal with allocation failures jffs2_kill_sb(): deal with failed allocations hypfs_kill_super(): deal with failed allocations
2018-04-17s390/signal: cleanup uapi struct sigactionMartin Schwidefsky
The struct sigaction for user space in arch/s390/include/uapi/asm/signal.h is ill defined. The kernel uses two structures 'struct sigaction' and 'struct old_sigaction', the correlation in the kernel for both 31 and 64 bit is as follows sys_sigaction -> struct old_sigaction sys_rt_sigaction -> struct sigaction The correlation of the (single) uapi definition for 'struct sigaction' under '#ifndef __KERNEL__': 31-bit: sys_sigaction -> uapi struct sigaction 31-bit: sys_rt_sigaction -> no structure available 64-bit: sys_sigaction -> no structure available 64-bit: sys_rt_sigaction -> uapi struct sigaction This is quite confusing. To make it a bit less confusing make the uapi definition of 'struct sigaction' usable for sys_rt_sigaction for both 31-bit and 64-bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: rename default_defconfig to debug_defconfigHeiko Carstens
The name debug_defconfig reflects what the config is actually good for and should be less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: remove gcov defconfigHeiko Carstens
This config is not needed anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: update defconfigMartin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: add support for IBM z14 Model ZR1Heiko Carstens
Just add the new machine type number to the two places that matter. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/boot: remove unused COMPILE_VERSION and ccflags-yVasily Gorbik
ccflags-y has no effect (no code is built in that directory, arch/s390/boot/compressed/Makefile defines its own KBUILD_CFLAGS). Removing ccflags-y together with COMPILE_VERSION. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/nospec: include cpu.hSebastian Ott
Fix the following sparse warnings: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? symbol 'cpu_show_spectre_v2' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/decompressor: Ignore file vmlinux.bin.fullThomas Richter
Commit 81796a3c6a4a ("s390/decompressor: trim uncompressed image head during the build") introduced a new file named vmlinux.bin.full in directory arch/s390/boot/compressed. Add this file to the list of ignored files so it does not show up on git status. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: add generated files to .gitignoreHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/Kconfig: Move kexec config options to "Processor type and features"Philipp Rudo
The config options for kexec are currently not under any menu directory. Up until now this was not a problem as standard kexec is always compiled in and thus does not create a menu entry. This changed when kexec_file_load was enabled. Its config option requires a menu entry which, when added beneath standard kexec option, appears on the main directory above "General Setup". Thus move the whole block further down such that the entry in now in "Processor type and features". While at it also update the help text for kexec file. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add ELF loaderPhilipp Rudo
Add an ELF loader for kexec_file. The main task here is to do proper sanity checks on the ELF file. Basically all other functionality was already implemented for the image loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add crash support to image loaderPhilipp Rudo
Add support to load a crash kernel to the image loader. This requires extending the purgatory. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add image loaderPhilipp Rudo
Add an image loader for kexec_file_load. For simplicity first skip crash support. The functions defined in machine_kexec_file will later be shared with the ELF loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add kexec_file_load system callPhilipp Rudo
This patch adds the kexec_file_load system call to s390 as well as the arch specific functions common code requires to work. Loaders for the different file types will be added later. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add purgatoryPhilipp Rudo
The common code expects the architecture to have a purgatory that runs between the two kernels. Add it now. For simplicity first skip crash support. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Prepare setup.h for kexec_file_loadPhilipp Rudo
kexec_file_load needs to prepare the new kernels before they are loaded. For that it has to know the offsets in head.S, e.g. to register the new command line. Unfortunately there are no macros right now defining those offsets. Define them now. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-15hypfs_kill_super(): deal with failed allocationsAl Viro
hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super() should not oops on that. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - various hotfixes - kexec_file updates and feature work * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) kernel/kexec_file.c: move purgatories sha256 to common code kernel/kexec_file.c: allow archs to set purgatory load address kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: split up __kexec_load_puragory kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* kernel/kexec_file.c: search symbols in read-only kexec_purgatory kernel/kexec_file.c: make purgatory_info->ehdr const kernel/kexec_file.c: remove checks in kexec_purgatory_load include/linux/kexec.h: silence compile warnings kexec_file, x86: move re-factored code to generic side x86: kexec_file: clean up prepare_elf64_headers() x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() x86: kexec_file: purge system-ram walking from prepare_elf64_headers() kexec_file,x86,powerpc: factor out kexec_file_ops functions kexec_file: make use of purgatory optional proc: revalidate misc dentries mm, slab: reschedule cache_reap() on the same CPU ...
2018-04-13mm/gup.c: document return valueMichael S. Tsirkin
__get_user_pages_fast handles errors differently from get_user_pages_fast: the former always returns the number of pages pinned, the later might return a negative error code. Link: http://lkml.kernel.org/r/1522962072-182137-6-git-send-email-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "Three notable larger changes next to the usual bug fixing: - update the email addresses in MAINTAINERS for the s390 folks to use the simpler linux.ibm.com domain instead of the old linux.vnet.ibm.com - an update for the zcrypt device driver that removes some old and obsolete interfaces and add support for up to 256 crypto adapters - a rework of the IPL aka boot code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390: correct nospec auto detection init order s390/zcrypt: Support up to 256 crypto adapters. s390/zcrypt: Remove deprecated zcrypt proc interface. s390/zcrypt: Remove deprecated ioctls. s390/zcrypt: Make ap init functions static. MAINTAINERS: update s390 maintainers email addresses s390/ipl: remove reipl_method and dump_method s390/ipl: correct kdump reipl block checksum calculation s390/ipl: remove non-existing functions declaration s390: assume diag308 set always works s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot s390/ipl: correct ipl parmblock valid checks s390/ipl: rely on diag308 store to get ipl info s390/ipl: move ipl_flags to ipl.c s390/ipl: get rid of ipl_ssid and ipl_devno s390/ipl: unite diag308 and scsi boot ipl blocks s390/ipl: ensure loadparm valid flag is set s390/qdio: lock device while installing IRQ handler s390/qdio: clear intparm during shutdown s390/ccwgroup: require at least one ccw device ...
2018-04-11exec: pass stack rlimit into mm layout functionsKees Cook
Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11s390: correct nospec auto detection init orderMartin Schwidefsky
With CONFIG_EXPOLINE_AUTO=y the call of spectre_v2_auto_early() via early_initcall is done *after* the early_param functions. This overwrites any settings done with the nobp/no_spectre_v2/spectre_v2 parameters. The code patching for the kernel is done after the evaluation of the early parameters but before the early_initcall is done. The end result is a kernel image that is patched correctly but the kernel modules are not. Make sure that the nospec auto detection function is called before the early parameters are evaluated and before the code patching is done. Fixes: 6e179d64126b ("s390: add automatic detection of the spectre defense") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-11 06:16:04 +0000