aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
AgeCommit message (Collapse)Author
2008-12-22sh: mach-sh03: Fix up pata_platform build breakage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: enable deferred io LCDC on Migo-RMagnus Damm
Enable LCDC deferred io on Migo-R using 1s delay. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add LCDC interrupt configuration to AP325 and Migo-RMagnus Damm
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off cf-enabler with extreme prejudice.Paul Mundt
Now that the rest of the boards that were using cf-enabler "generically" have switched to setting up their mappings on their own, only the mach-se boards were left using it. All of the cf-enabler using mach-se boards use a special initialization of the MRSHPC windows rather than going through the special PTE as other SH-4 platforms do. This consolidates the MRSHPC setup logic, hooks it up on the boards that care, and gets rid of any and all remaining references to cf-enabler. This has been long overdue, as cf-enabler has been the bane of arch/sh/kernel for the last 7 years. Good riddance. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-edosk7705: Fix up edosk7705 so it all builds again.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-microdev: Split out the fdc37c93xapm initialization code.Paul Mundt
This makes the microdev code a bit more readable, and moves the setup for the SuperIO out on its own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().Paul Mundt
This also fixes up a long-standing bug for this platform where the PIO base was set to a register offset, rather than the actual PIO offset itself. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.Paul Mundt
This gets rid of the cf enabler use on mach-sh03 and switches to use pata_platform with the proper address directly. cf_enabler is subsequently disabled for mach-sh03. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: board-shmin: Convert shmin to use __set_io_port_base().Paul Mundt
Drop the special mv_ioport_map() implementation, as this can simply use __set_io_port_base() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the cayman and microdev special heartbeat code.Paul Mundt
These can use the generic code instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Cayman boards from hw_interrupt_type to irq_chipMatt Fleming
I've been unable to even compile-test this change because I don't have an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have now been converted to use irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Dreamcast support from hw_interrupt_type to irq_chipMatt Fleming
Switch the dreamcast IRQ code over to the irq_chip way of doing things, so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Also, whilst I'm here change some things to make checkpatch.pl happy: - Indent with tabs, not with spaces - Include <linux/io.h>, not <asm/io.h> - Fix the multi-line comment style - Fix some typos in the comments Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert SystemH board support from hw_interrupt_type to irq_chipMatt Fleming
... as part of the hw_interrupt_type to irq_chip crusade. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Microdev boards from hw_interrupt_type to irq_chipMatt Fleming
This is part of the SH move to irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-migor: Kill off unused Migo-R machvec.Paul Mundt
This kills off the special Migo-R machvec, as nothing is using it. By default this will switch to using the generic machvec, which provides the same functionality. This saves us a bit of space in the machvec section. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add ov772x reset delay on Migo-RMagnus Damm
Add reset delay for the ov772x device on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt
RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: move the hp6xx pm codeMagnus Damm
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the platform directory together with the rest of the hp6xx pm code. This is done to let non-hp6xx platforms enable CONFIG_PM. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove ioport cruft and smc91x from se7343Magnus Damm
Remove out-of-date se7343 ioport code including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add isp1161 usb host device to se7343Magnus Damm
Add isp1161 platform data to get usb host working on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add st16c2550 devices to se7343Magnus Damm
Add 8250 platform data to setup the ST16C2550C chip on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix number of interrupts on se7343Magnus Damm
Fix to make sure that the on-board interrupt sources are included in the interrupt count on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile lcdc clock framework supportMagnus Damm
Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile ceu clock framework supportMagnus Damm
Add clock framework support to the sh_mobile ceu and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile keysc clock framework supportMagnus Damm
Add clock framework support to the sh_mobile keysc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-22sh: use 10MHz VIO_CLK for ov772x on Migo-RMagnus Damm
Use a slower VIO_CKO clock frequency for the ov772x on Migo-R. This improves the camera picture quality on Panel Board V2.1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: update ov772x byte order on Migo-RMagnus Damm
Update the ov772x byte sequence to enable byte swap. This to reflect the recent CEU driver change to follow incoming byte order. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Kill off unused port definitions.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: add support FLCTL for ap325rxa boardYoshihiro Shimoda
This patch adds platform_device for sh_flctl driver, NAND Flash simple partition, and GPIO setting. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: rsk7203: leds-gpio support for RSK+ LEDs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: fix soc-camera compile breakage on Migo-R.Guennadi Liakhovetski
Fix Migo-R compile breakage caused by incomplete merge. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: Fix up the SH7203 build.Paul Mundt
The sh7203.h include paths were missed in the previous update, so switch the include path to cpu/ as with the rest. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Migrate common board headers to mach-common/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Move the CPU definition headers from asm/ to cpu/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: reduce Migo-R smc91x overrunsMagnus Damm
Improve Migo-R ethernet performance by reducing smc91x overruns. This is done by enabling SMC91X_NOWAIT and optimizing CS4 setup. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Merge branch 'sh/gpiolib'Paul Mundt
2008-10-20sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA boardNobuhiro Iwamatsu
Renesas AP325RXA board has Epson RX-8564LC of RTC. This patch supports RTC of this board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7720 GPIO on magicpanelr2 boardMagnus Damm
This patch hooks up the magicpanelr2 board with the sh7720 pinmux code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7203 GPIO on rsk7203 boardMagnus Damm
Make the rsk7203 board use the newly added sh7203 pinmux code. Only a single LED plus the serial console pins for now. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7723 GPIO on AP325RXA boardMagnus Damm
This patch enables the GPIO code on AP325RXA and converts the code from register based pinmux configuration to GPIO based pin by pin setup. While at it 2 LEDs and one switch are added and exported to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7722 GPIO on Migo-R boardMagnus Damm
This patch enables the GPIO code on Migo-R and converts the code from register based pinmux configuration to GPIO based pin by pin setup. Fix whitespace damage while at it and add 2 LEDs and export them to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt
This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-24sh: ap325rxa: create CPLD data area in mtdNobuhiro Iwamatsu
AP320 and AP325RXA has CPLD data in NOR Flash. If this area erased, this board can not boot. This patch create CPLD data area and set writeable mask bit. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21sh: edosk7760: Correct size of bootloader flash partition.Luca Santini
This is 256K instead of 1M. [ Converted to use asm/sizes.h. -- PFM ] Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12sh: edosk7760 physmap-flash support.Luca Santini
Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Add Renesas EDOSK7760 board support.Luca Santini
This adds support for the Renesas (RTE) EDOSK7760 board. Currently supported devices are: - ramdisk support - ethernet support - nfs support - ext2/ext3 support - i2c support - fb support (M) Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11video: export sh_mobile_lcdc panel sizeMagnus Damm
Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 08:13:29 +0000