aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2008-09-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_init(): fix memory leak when using CPU hotplug x86: pda_init(): fix memory leak when using CPU hotplug x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flags x86: move mtrr cpu cap setting early in early_init_xxxx x86: delay early cpu initialization until cpuid is done x86: use X86_FEATURE_NOPL in alternatives x86: add NOPL as a synthetic CPU feature bit x86: boot: stub out unimplemented CPU feature words
2008-09-06Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource, acpi_pm.c: check for monotonicity clocksource, acpi_pm.c: use proper read function also in errata mode ntp: fix calculation of the next jiffie to trigger RTC sync x86: HPET: read back compare register before reading counter x86: HPET fix moronic 32/64bit thinko clockevents: broadcast fixup possible waiters HPET: make minimum reprogramming delta useful clockevents: prevent endless loop lockup clockevents: prevent multiple init/shutdown clockevents: enforce reprogram in oneshot setup clockevents: prevent endless loop in periodic broadcast handler clockevents: prevent clockevent event_handler ending up handler_noop
2008-09-06x86: cpu_init(): fix memory leak when using CPU hotplugAndreas Herrmann
Exception stacks are allocated each time a CPU is set online. But the allocated space is never freed. Thus with one CPU hotplug offline/online cycle there is a memory leak of 24K (6 pages) for a CPU. Fix is to allocate exception stacks only once -- when the CPU is set online for the first time. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: pda_init(): fix memory leak when using CPU hotplugAndreas Herrmann
pda->irqstackptr is allocated whenever a CPU is set online. But it is never freed. This results in a memory leak of 16K for each CPU offline/online cycle. Fix is to allocate pda->irqstackptr only once. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flagsEduardo Habkost
Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: move mtrr cpu cap setting early in early_init_xxxxYinghai Lu
Krzysztof Helt found MTRR is not detected on k6-2 root cause: we moved mtrr_bp_init() early for mtrr trimming, and in early_detect we only read the CPU capability from cpuid, so some cpu doesn't have that bit in cpuid. So we need to add early_init_xxxx to preset those bit before mtrr_bp_init for those earlier cpus. this patch is for v2.6.27 Reported-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: delay early cpu initialization until cpuid is doneKrzysztof Helt
Move early cpu initialization after cpu early get cap so the early cpu initialization can fix up cpu caps. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: HPET: read back compare register before reading counterThomas Gleixner
After fixing the u32 thinko I sill had occasional hickups on ATI chipsets with small deltas. There seems to be a delay between writing the compare register and the transffer to the internal register which triggers the interrupt. Reading back the value makes sure, that it hit the internal match register befor we compare against the counter value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-06x86: HPET fix moronic 32/64bit thinkoThomas Gleixner
We use the HPET only in 32bit mode because: 1) some HPETs are 32bit only 2) on i386 there is no way to read/write the HPET atomic 64bit wide The HPET code unification done by the "moron of the year" did not take into account that unsigned long is different on 32 and 64 bit. This thinko results in a possible endless loop in the clockevents code, when the return comparison fails due to the 64bit/332bit unawareness. unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit. but the final compare will fail and return -ETIME causing endless loops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-05x86: use X86_FEATURE_NOPL in alternativesH. Peter Anvin
Use X86_FEATURE_NOPL to determine if it is safe to use P6 NOPs in alternatives. Also, replace table and loop with simple if statement. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05x86: add NOPL as a synthetic CPU feature bitH. Peter Anvin
The long noops ("NOPL") are supposed to be detected by family >= 6. Unfortunately, several non-Intel x86 implementations, both hardware and software, don't obey this dictum. Instead, probe for NOPL directly by executing a NOPL instruction and see if we get #UD. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05x86: boot: stub out unimplemented CPU feature wordsH. Peter Anvin
The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: add io delay quirk for Presario F700
2008-09-05HPET: make minimum reprogramming delta usefulThomas Gleixner
The minimum reprogramming delta was hardcoded in HPET ticks, which is stupid as it does not work with faster running HPETs. The C1E idle patches made this prominent on AMD/RS690 chipsets, where the HPET runs with 25MHz. Set it to 5us which seems to be a reasonable value and fixes the problems on the bug reporters machines. We have a further sanity check now in the clock events, which increases the delta when it is not sufficient. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Tested-by: Dmitry Nezhevenko <dion@inhex.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-03x86: Change warning message in TSC calibration.Alok N Kataria
When calibration against PIT fails, the warning that we print is misleading. In a virtualized environment the VM may get descheduled while calibration or, the check in PIT calibration may fail due to other virtualization overheads. The warning message explicitly assumes that calibration failed due to SMI's which may not be the case. Change that to something proper. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03x86: add io delay quirk for Presario F700Chuck Ebbert
Manually adding "io_delay=0xed" fixes system lockups in ioapic mode on this machine. System Information Manufacturer: Hewlett-Packard Product Name: Presario F700 (KA695EA#ABF) Base Board Information Manufacturer: Quanta Product Name: 30D3 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=459546 Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-03Split up PIT part of TSC calibration from native_calibrate_tscLinus Torvalds
The TSC calibration function is still very complicated, but this makes it at least a little bit less so by moving the PIT part out into a helper function of its own. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02[x86] Fix TSC calibration issuesThomas Gleixner
Larry Finger reported at http://lkml.org/lkml/2008/9/1/90: An ancient laptop of mine started throwing errors from b43legacy when I started using 2.6.27 on it. This has been bisected to commit bfc0f59 "x86: merge tsc calibration". The unification of the TSC code adopted mostly the 64bit code, which prefers PMTIMER/HPET over the PIT calibration. Larrys system has an AMD K6 CPU. Such systems are known to have PMTIMER incarnations which run at double speed. This results in a miscalibration of the TSC by factor 0.5. So the resulting calibrated CPU/TSC speed is half of the real CPU speed, which means that the TSC based delay loop will run half the time it should run. That might explain why the b43legacy driver went berserk. On the other hand we know about systems, where the PIT based calibration results in random crap due to heavy SMI/SMM disturbance. On those systems the PMTIMER/HPET based calibration logic with SMI detection shows better results. According to Alok also virtualized systems suffer from the PIT calibration method. The solution is to use a more wreckage aware aproach than the current either/or decision. 1) reimplement the retry loop which was dropped from the 32bit code during the merge. It repeats the calibration and selects the lowest frequency value as this is probably the closest estimate to the real frequency 2) Monitor the delta of the TSC values in the delay loop which waits for the PIT counter to reach zero. If the maximum value is significantly different from the minimum, then we have a pretty safe indicator that the loop was disturbed by an SMI. 3) keep the pmtimer/hpet reference as a backup solution for systems where the SMI disturbance is a permanent point of failure for PIT based calibration 4) do the loop iteration for both methods, record the lowest value and decide after all iterations finished. 5) Set a clear preference to PIT based calibration when the result makes sense. The implementation does the reference calibration based on HPET/PMTIMER around the delay, which is necessary for the PIT anyway, but keeps separate TSC values to ensure the "independency" of the resulting calibration values. Tested on various 32bit/64bit machines including Geode 266Mhz, AMD K6 (affected machine with a double speed pmtimer which I grabbed out of the dump), Pentium class machines and AMD/Intel 64 bit boxen. Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02Un-break printk strings in x86 PCI probing codeLinus Torvalds
Breaking lines due to some imaginary problem with a long line length is often stupid and wrong, but never more so when it splits a string that is printed out into multiple lines. This really ended up making it much harder to find where some error strings were printed out, because a simple 'grep' didn't work. I'm sure there is tons more of this particular idiocy hiding in other places, but this particular case hit me once more last week. So fix it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-29Revert "x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against ↵Linus Torvalds
BAR, v3" This reverts commit a2bd7274b47124d2fc4dfdb8c0591f545ba749dd. It wasn't really right to begin with (there's a better fix for the problem with e820 reservations clashing with PCI BAR's pending), but it also actually causes more regressions, so it should be reverted even before the better fix is finalized. Rafael reports that this commit broke AHCI detection, and thus causes the kernel to not boot on his quad core test box. Reported-and-bisected-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: David Witbrodt <dawitbro@sbcglobal.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-28Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: update defconfigs x86: msr: fix bogus return values from rdmsr_safe/wrmsr_safe x86: cpuid: correct return value on partial operations x86: msr: correct return value on partial operations x86: cpuid: propagate error from smp_call_function_single() x86: msr: propagate errors from smp_call_function_single() smp: have smp_call_function_single() detect invalid CPUs
2008-08-27x86: update defconfigsH. Peter Anvin
Enable some option commonly used by testers in defconfig, including some very common device drivers and network boot support. defconfig is still not meant to be a kitchen-sink configuration. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-25x86: cpuid: correct return value on partial operationsH. Peter Anvin
Return the correct return value when the CPUID driver partially completes a request (we should return the number of bytes actually read or written, instead of the error code.) Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-25x86: msr: correct return value on partial operationsH. Peter Anvin
Return the correct return value when the MSR driver partially completes a request (we should return the number of bytes actually read or written, instead of the error code.) Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-25x86: cpuid: propagate error from smp_call_function_single()H. Peter Anvin
Propagate error (-ENXIO) from smp_call_function_single() in the CPUID driver. This can happen when a CPU is unplugged while the CPUID driver is open. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-25x86: msr: propagate errors from smp_call_function_single()H. Peter Anvin
Propagate error (-ENXIO) from smp_call_function_single(). These errors can happen when a CPU is unplugged while the MSR driver is open. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-25[x86] Clean up MAXSMP Kconfig, and limit NR_CPUS to 512Linus Torvalds
This fixes a regression that was indirectly caused by commit 1184dc2ffe2c8fb9afb766d870850f2c3165ef25 ("x86: modify Kconfig to allow up to 4096 cpus"). Allowing 4k CPU's is not practical at this time, because we still have a number of places that have several 'cpumask_t's on the stack, and a 4k-bit cpumask is 512 bytes of stack-space for each such variable. This literally caused functions like 'smp_call_function_mask' to have a 2.5kB stack frame, and several functions to have 2kB stackframes. With an 8kB stack total, smashing the stack was simply much too likely. At least bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=11342 was due to this. The earlier commit to not inline load_module() into sys_init_module() fixed the particular symptoms of this that Alan Brunelle saw in that bugzilla entry, but the huge stack waste by cpumask_t's was the more direct cause. Some day we'll have allocation helpers that allocate large CPU masks dynamically, but in the meantime we simply cannot allow cpumasks this large. Cc: Alan D. Brunelle <Alan.Brunelle@hp.com> Cc: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-25Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: add X86_FEATURE_XMM4_2 definitions x86: fix cpufreq + sched_clock() regression x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3 x86: do not enable TSC notifier if we don't need it x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUs x86: fix: make PCI ECS for AMD CPUs hotplug capable x86: fix: do not run code in amd_bus.c on non-AMD CPUs
2008-08-25KVM: MMU: Fix torn shadow pteAvi Kivity
The shadow code assigns a pte directly in one place, which is nonatomic on i386 can can cause random memory references. Fix by using an atomic setter. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-08-25x86: fix cpufreq + sched_clock() regressionPeter Zijlstra
I noticed that my sched_clock() was slow on a number of machine, so I started looking at cpufreq. The below seems to fix the problem for me. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25Merge branch 'linus' into x86/urgentIngo Molnar
2008-08-25x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3Yinghai Lu
David Witbrodt tracked down (and bisected) a hpet bootup hang on his system to the following problem: a BIOS bug made the hpet device visible as a generic PCI device. If e820 reserved entries happen to be registered first in the resource tree [which v2.6.26 started doing], then the PCI code will reallocate that device's BAR to some other address - breaking timer IRQs and hanging the system. ( Normally hpet devices are hidden by the BIOS from the OS's PCI discovery via chipset magic. Sometimes the hpet is not a PCI device at all. ) Solve this fundamental fragility by making non-PCI platform drivers insert resources into the resource tree even if it overlaps the e820 reserved entry, to keep the resource manager from updating the BAR. Also do these checks for the ioapic and mmconfig addresses, and emit a warning if this happens. Bisected-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-24x86: do not enable TSC notifier if we don't need itLinus Torvalds
Impact: crash on non-TSC-equipped CPUs Don't enable the TSC notifier if we *either*: 1. don't have a CPU, or 2. have a CPU with constant TSC. In either of those cases, the notifier is either damaging (1) or useless(2). From: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUsRafael J. Wysocki
During CPU hot-remove the sysfs directory created by threshold_create_bank(), defined in arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before its parent directory, created by mce_create_device(), defined in arch/x86/kernel/cpu/mcheck/mce_64.c . Moreover, when the CPU in question is hotplugged again, obviously the latter has to be created before the former. At present, the right ordering is not enforced, because all of these operations are carried out by CPU hotplug notifiers which are not appropriately ordered with respect to each other. This leads to serious problems on systems with two or more multicore AMD CPUs, among other things during suspend and hibernation. Fix the problem by placing threshold bank CPU hotplug callbacks in mce_cpu_callback(), so that they are invoked at the right places, if defined. Additionally, use kobject_del() to remove the sysfs directory associated with the kobject created by kobject_create_and_add() in threshold_create_bank(), to prevent the kernel from crashing during CPU hotplug operations on systems with two or more multicore AMD CPUs. This patch fixes bug #11337. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andi Kleen <andi@firstfloor.org> Tested-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23x86: fix: make PCI ECS for AMD CPUs hotplug capableRobert Richter
Until now, PCI ECS setup was performed at boot time only and for cpus that are enabled then. This patch fixes this and adds cpu hotplug. Tests sequence (check if ECS bit is set when bringing cpu online again): # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00400010 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 1 > /sys/devices/system/cpu/cpu1/online # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23x86: fix: do not run code in amd_bus.c on non-AMD CPUsRobert Richter
Jan Beulich wrote: > Even worse - this would even try to access the MSR on non-AMD CPUs > (currently probably prevented just by the fact that only AMD ones use > family values of 0x10 or higher). This patch adds cpu vendor check to the postcore_initcalls. Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: work around MTRR mask setting, v2 x86: fix section mismatch warning - uv_cpu_init x86: fix VMI for early params x86: fix two modpost warnings in mm/init_64.c x86: fix 1:1 mapping init on 64-bit (memory hotplug case) x86: work around MTRR mask setting x86: PAT Update validate_pat_support for intel CPUs devmem, x86: PAT Change /dev/mem mmap with O_SYNC to use UC_MINUS x86: PAT proper tracking of set_memory_uc and friends x86: fix BUG: unable to handle kernel paging request (numaq_tsc_disable) x86: export pv_lock_ops non-GPL x86, mmiotrace: silence section mismatch warning - leave_uniprocessor x86: use WARN() in arch/x86/kernel x86: use WARN() in arch/x86/mm/ioremap.c werror: fix pci calgary x86: fix oprofile + hibernation badness x86, SGI UV: hardcode the TLB flush interrupt system vector x86: fix Xorg startup/shutdown slowdown with PAT x86: fix "kernel won't boot on a Cyrix MediaGXm (Geode)" x86 iommu: remove unneeded parenthesis
2008-08-22x86: work around MTRR mask setting, v2Ingo Molnar
improve the debug printout: - make it actually display something - print it only once would be nice to have a WARN_ONCE() facility, to feed such things to kerneloops.org. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix section mismatch warning - uv_cpu_initMarcin Slusarz
WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init() The function __cpuinit uv_cpu_init() references a function __init uv_system_init(). If uv_system_init is only used by uv_cpu_init then annotate uv_system_init with a matching annotation. uv_system_init was ment to be called only once, so do it from codepath (native_smp_prepare_cpus) which is called once, right before activation of other cpus (smp_init). Note: old code relied on uv_node_to_blade being initialized to 0, but it'a not initialized from anywhere. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix VMI for early paramsAlok Kataria
while fixing a different bug i moved the call to vmi_init before early params could be parsed. This broke the vmi specific commandline parameters. Fix that, by moving vmi initialization after kernel has got a chance to parse early parameters. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix two modpost warnings in mm/init_64.cJan Beulich
early_io{re,un}map() are __init and hence can't be called from __meminit functions. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix 1:1 mapping init on 64-bit (memory hotplug case)Jan Beulich
While I don't have a hotplug capable system at hand, I think two issues need fixing: - pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in the after_bootmem case - the locking done just around phys_pmd_{init,update}() would leave out pgd updates, and it was needlessly covering code portions that do allocations (perhaps using a more friendly gfp value in alloc_low_page() would then be possible) Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: work around MTRR mask settingYinghai Lu
Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is usable. Booting with mtrr_show showed us the BIOS-initialized MTRR settings - which are all wrong. So the root cause is that the BIOS has not set the mask correctly: > [ 0.429971] MSR00000200: 00000000d0000000 > [ 0.433305] MSR00000201: 0000000ff0000800 > should be ==> [ 0.433305] MSR00000201: 0000003ff0000800 > > [ 0.436638] MSR00000202: 00000000e0000000 > [ 0.439971] MSR00000203: 0000000fe0000800 > should be ==> [ 0.439971] MSR00000203: 0000003fe0000800 > > [ 0.443304] MSR00000204: 0000000000000006 > [ 0.446637] MSR00000205: 0000000c00000800 > should be ==> [ 0.446637] MSR00000205: 0000003c00000800 > > [ 0.449970] MSR00000206: 0000000400000006 > [ 0.453303] MSR00000207: 0000000fe0000800 > should be ==> [ 0.453303] MSR00000207: 0000003fe0000800 > > [ 0.456636] MSR00000208: 0000000420000006 > [ 0.459970] MSR00000209: 0000000ff0000800 > should be ==> [ 0.459970] MSR00000209: 0000003ff0000800 So detect this borkage and add the prefix 111. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: PAT Update validate_pat_support for intel CPUsvenkatesh.pallipadi@intel.com
Pentium III and Core Solo/Duo CPUs have an erratum " Page with PAT set to WC while associated MTRR is UC may consolidate to UC " which can result in WC setting in PAT to be ineffective. We will disable PAT on such CPUs, so that we can continue to use MTRR WC setting. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21devmem, x86: PAT Change /dev/mem mmap with O_SYNC to use UC_MINUSvenkatesh.pallipadi@intel.com
All kernel mappings like ioremap(), etc uses UC_MINUS as the type. /dev/mem mappings with /dev/mem being opened with O_SYNC however was using UC, resulting in a conflict with /dev/mem mmap failing. This seems to be affecting some apps (one being flashrom) which are using O_SYNC and which were working before. Switch /dev/mem with O_SYNC also to UC_MINUS. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: PAT proper tracking of set_memory_uc and friendsvenkatesh.pallipadi@intel.com
Big thinko in pat memtype tracking code. reserve_memtype should be called with physical address and not virtual address. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: fix BUG: unable to handle kernel paging request (numaq_tsc_disable)Vegard Nossum
This section mismatch: >> Seems to be a section mismatch; init_intel() is __cpuinit while >> numaq_tsc_disable() is __init. Seems to be introduced in: >> >> commit 64898a8bad8c94ad7a4bd5cc86b66edfbb081f4a >> Author: Yinghai Lu <yhlu.kernel@gmail.com> >> Date: Sat Jul 19 18:01:16 2008 -0700 >> >> x86: extend and use x86_quirks to clean up NUMAQ code > > Oops, I am wrong about numaq_tsc_disable() being __init. Still, I > believe that Yinghai might be able to say what's really wrong :-) Would lead to this crash: BUG: unable to handle kernel paging request at c08a45f0 IP: [<c08a45f0>] numaq_tsc_disable+0x0/0x40 Fixed by the patch below. Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: export pv_lock_ops non-GPLJeremy Fitzhardinge
None of the spinlock API is exported GPL, so there's no reason for pv_lock_ops to be. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: drago01 <drago01@gmail.com>
2008-08-21x86, mmiotrace: silence section mismatch warning - leave_uniprocessorMarcin Slusarz
WARNING: vmlinux.o(.text+0x180af): Section mismatch in reference from the function leave_uniprocessor() to the function .cpuinit.text:cpu_up() The function leave_uniprocessor() references the function __cpuinit cpu_up(). This is often because leave_uniprocessor lacks a __cpuinit annotation or the annotation of cpu_up is wrong. leave_uniprocessor calls cpu_up only when CONFIG_HOTPLUG_CPU is set, so it can be safely annotated as __ref Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pekka Paalanen <pq@iki.fi>