aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-11-29Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Remove preempt_count modifications in the arm64 IRQ handling code since that's already dealt with in generic irq_enter/irq_exit - PTE_PROT_NONE bit moved higher up to avoid overlapping with the hardware bits (for PROT_NONE mappings which are pte_present) - Big-endian fixes for ptrace support - Asynchronous aborts unmasking while in the kernel - pgprot_writecombine() change to create Normal NonCacheable memory rather than Device GRE * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Move PTE_PROT_NONE higher up arm64: Use Normal NonCacheable memory for writecombine arm64: debug: make aarch32 bkpt checking endian clean arm64: ptrace: fix compat registes get/set to be endian clean arm64: Unmask asynchronous aborts when in kernel mode arm64: dts: Reserve the memory used for secondary CPU release address arm64: let the core code deal with preempt_count
2013-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "One performance improvement and a few bug fixes. Two of the fixes deal with the clock related problems we have seen on recent kernels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: handle asce-type exceptions as normal page fault s390,time: revert direct ktime path for s390 clockevent device s390/time,vdso: convert to the new update_vsyscall interface s390/uaccess: add missing page table walk range check s390/mm: optimize copy_page s390/dasd: validate request size before building CCW/TCW request s390/signal: always restore saved runtime instrumentation psw bit
2013-11-29arm64: Move PTE_PROT_NONE higher upCatalin Marinas
PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> # 3.11+
2013-11-29arm64: Use Normal NonCacheable memory for writecombineCatalin Marinas
This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28arm64: debug: make aarch32 bkpt checking endian cleanMatthew Leach
The current breakpoint instruction checking code for A32 is not endian clean. Fix this with appropriate byte-swapping when retrieving instructions. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28arm64: ptrace: fix compat registes get/set to be endian cleanMatthew Leach
On a BE system the wrong half of the X registers is retrieved/written when attempting to get/set the value of aarch32 registers through ptrace. Ensure that types are the correct width so that the relevant casting occurs. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "The main thing that caused problem was that CONFIG_CPU_LITTLE_ENDIAN got turned on with allyesconfig and such, which is not a very good idea especially since it requires a newer toolchain than what most people have. So we turned it into a choice instead that defaults to big endian" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/windfarm: Fix XServe G5 fan control Makefile issue arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow powerpc/signals: Improved mark VSX not saved with small contexts fix powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN powerpc: Fix error when cross building TAGS & cscope powerpc/booke: Only check for hugetlb in flush if vma != NULL powerpc/85xx: typo in dts: "interupt" (four devices) powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well
2013-11-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Mostly bugfixes and a few small code removals. Worth pointing out is: - A handful of more fixes to get DT enablement working properly on OMAP, finding new breakage of things that don't work quite right yet without the traditional board files. I expect a bit more of this to come in this release as people test on their hardware. - Implementation of power_down_finish() on vexpress, to make kexec work and to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1). - A handful of minor fixes for various platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm2835: add missing #xxx-cells to I2C nodes ARM: dts: Add max77686 RTC interrupt to cros5250-common ARM: vexpress/TC2: Implement MCPM power_down_finish() ARM: tegra: Provide dummy powergate implementation ARM: omap: fix warning with LPAE build ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: imx6qdl: disable spdif "rxtx5" clock option ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-25ARM: bcm2835: add missing #xxx-cells to I2C nodesStephen Warren
The I2C controller node needs #address-cells and #size-cells properties, but these are currently missing. Add them. This allows child nodes to be parsed correctly. Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25Merge tag 'imx-fixes-3.13-2' of ↵Kevin Hilman
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes The imx fixes for 3.13, part 2: - Disable S/PDIF "rxtx5" clock option to fix the clocksource breakage introduced by S/PDIF driver * tag 'imx-fixes-3.13-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx6qdl: disable spdif "rxtx5" clock option Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25ARM: dts: Add max77686 RTC interrupt to cros5250-commonDoug Anderson
Without the interrupt you'll get problems if you enable CONFIG_RTC_DRV_MAX77686. Setup the interrupt properly in the device tree. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org
2013-11-25ARM: vexpress/TC2: Implement MCPM power_down_finish()Dave Martin
This patch implements the power_down_finish() method for TC2, to enable the kernel to confirm when CPUs are safely powered down. The information required for determining when a CPU is parked cannot be obtained from any single place, so a few sources of information must be combined: * mcpm_cpu_power_down() must be pending for the CPU, so that we don't get confused by false STANDBYWFI positives arising from CPUidle. This is detected by waiting for the tc2_pm use count for the target CPU to reach 0. * Either the SPC must report that the CPU has asserted STANDBYWFI, or the TC2 tile's reset control logic must be holding the CPU in reset. Just checking for STANDBYWFI is not sufficient, because this signal is not latched when the the cluster is clamped off and powered down: the relevant status bits just drop to zero. This means that STANDBYWFI status cannot be used for reliable detection of the last CPU in a cluster reaching WFI. This patch is required in order for kexec to work with MCPM on TC2. MCPM code was changed in commit 0de0d6467525 ('ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown'), and since then it will hit a WARN_ON_ONCE() due to power_down_finish not being implemented on the TC2 platform. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-25ARM: omap: fix warning with LPAE buildOlof Johansson
Some omap3 code is throwing a warning: arch/arm/mach-omap2/pm34xx.c: In function 'omap3_save_secure_ram_context': arch/arm/mach-omap2/pm34xx.c:123:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] In reality this code will never actually execute with LPAE=y, since Cortex-A8 doesn't support it. So downcasting the __pa() is safe in this case. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com>
2013-11-25arm64: Unmask asynchronous aborts when in kernel modeCatalin Marinas
The asynchronous aborts are generally fatal for the kernel but they can be masked via the pstate A bit. If a system error happens while in kernel mode, it won't be visible until returning to user space. This patch enables this kind of abort early to help identifying the cause. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25arm64: dts: Reserve the memory used for secondary CPU release addressCatalin Marinas
With the spin-table SMP booting method, secondary CPUs poll a location passed in the DT. The foundation-v8.dts file doesn't have this memory reserved and there is a risk of Linux using it before secondary CPUs are started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25arm64: let the core code deal with preempt_countMarc Zyngier
Commit f27dde8deef3 (sched: Add NEED_RESCHED to the preempt_count) introduced the use of bit 31 in preempt_count for obscure scheduling purposes. This causes interrupts taken from EL0 to hit the (open coded) BUG when this flag is flipped while handling the interrupt (we compare the values before and after, and kill the kernel if they are different). The fix is to stop messing with the preempt count entirely, as this is already being dealt with in the generic code (irq_enter/irq_exit). Tested on a dual A53 FPGA running cyclictest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25s390/mm: handle asce-type exceptions as normal page faultMartin Schwidefsky
Git commit 9e34f2686bb088b211b6cac8772e1f644c6180f8 "s390/mm,tlb: tlb flush on page table upgrade fixup" removed the exception handler for the asce-type exception. This is incorrect as the user-copy with MVCOS can cause asce-type exceptions in the kernel if a user pointer is too large. Those need to be handled with do_no_context to branch to the fixup in the user-copy code. The simplest fix for this problem is to call do_dat_exception for asce-type excpetions, as there is no vma for the address the code will handle the exception correctly. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25s390,time: revert direct ktime path for s390 clockevent deviceMartin Schwidefsky
Git commit 4f37a68cdaf6dea833cfdded2a3e0c47c0f006da "s390: Use direct ktime path for s390 clockevent device" makes use of the CLOCK_EVT_FEAT_KTIME clockevent option to avoid the delta calculation with ktime_get() in clockevents_program_event and the get_tod_clock() in s390_next_event. This is based on the assumption that the difference between the internal ktime and the hardware clock is reflected in the wall_to_monotonic delta. But this is not true, the ntp corrections are applied via changes to the tk->mult multiplier and this is not reflected in wall_to_monotonic. In theory this could be solved by using the raw monotonic clock but it is simpler to switch back to the standard clock delta calculation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25s390/time,vdso: convert to the new update_vsyscall interfaceMartin Schwidefsky
Switch to the improved update_vsyscall interface that provides sub-nanosecond precision for gettimeofday and clock_gettime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25s390/uaccess: add missing page table walk range checkHeiko Carstens
When translating a user space address, the address must be checked against the ASCE limit of the process. If the address is larger than the maximum address that is reachable with the ASCE, an ASCE type exception must be generated. The current code simply ignored the higher order bits. This resulted in an address wrap around in user space instead of an exception in user space. Cc: stable@vger.kernel.org # v3.9+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflowChen Gang
for tmp_part->header.name: it is "Terminating null required only for names < 12 chars". so need to limit the %.12s for it in printk additional info: %12s limit the width, not for the original string output length if name length is more than 12, it still can be fully displayed. if name length is less than 12, the ' ' will be filled before name. %.12s truly limit the original string output length (precision) Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25powerpc/signals: Improved mark VSX not saved with small contexts fixMichael Neuling
In a recent patch: commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42 Author: Michael Neuling <mikey@neuling.org> powerpc/signals: Mark VSX not saved with small contexts We fixed an issue but an improved solution was later discussed after the patch was merged. Firstly, this patch doesn't handle the 64bit signals case, which could also hit this issue (but has never been reported). Secondly, the original patch isn't clear what MSR VSX should be set to. The new approach below always clears the MSR VSX bit (to indicate no VSX is in the context) and sets it only in the specific case where VSX is available (ie. when VSX has been used and the signal context passed has space to provide the state). This reverts the original patch and replaces it with the improved solution. It also adds a 64 bit version. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filteringHari Bathini
When CONFIG_SPARSEMEM_VMEMMAP option is used in kernel, makedumpfile fails to filter vmcore dump as it fails to do vmemmap translations. So far dump filtering on ppc64 never had to deal with vmemmap addresses seperately as vmemmap regions where mapped in zone normal. But with the inclusion of CONFIG_SPARSEMEM_VMEMMAP config option in kernel, this vmemmap address translation support becomes necessary for dump filtering. For vmemmap adress translation, few kernel symbols are needed by dump filtering tool. This patch adds those symbols to vmcoreinfo, which a dump filtering tool can use for filtering the kernel dump. Tested this changes successfully with makedumpfile tool that supports vmemmap to physical address translation outside zone normal. [ Removed unneeded #ifdef as suggested by Michael Ellerman --BenH ] Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIANAnton Blanchard
Stephen reported a failure in an allyesconfig build. CONFIG_CPU_LITTLE_ENDIAN=y gets set but his toolchain is not new enough to support little endian. We really want to default to a big endian build; Ben suggested using a choice which defaults to CPU_BIG_ENDIAN. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25powerpc: Fix error when cross building TAGS & cscopeMichael Neuling
Currently if I cross build TAGS or cscope from x86 I get this: % make ARCH=powerpc TAGS gcc-4.8.real: error: unrecognized command line option ‘-mbig-endian’ GEN TAGS % I'm not setting CROSS_COMPILE= as logically I shouldn't need to and I haven't needed to in the past when building TAGS or cscope. Also, the above completess correct as the error is not fatal to the build. This was caused by: commit d72b08017161ab385d4ae080ea415c9eb7ceef83 Author: Ian Munsie <imunsie@au1.ibm.com> powerpc: Add ability to build little endian kernels The below fixes this by testing for the -mbig-endian option before adding it. I've not done the same thing in the little endian case as if -mlittle-endian doesn't exist, we probably want to fail quickly as you probably have an old big endian compiler. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - Made x86 ablk_helper generic for ARM - Phase out chainiv in favour of eseqiv (affects IPsec) - Fixed aes-cbc IV corruption on s390 - Added constant-time crypto_memneq which replaces memcmp - Fixed aes-ctr in omap-aes - Added OMAP3 ROM RNG support - Add PRNG support for MSM SoC's - Add and use Job Ring API in caam - Misc fixes [ NOTE! This pull request was sent within the merge window, but Herbert has some questionable email sending setup that makes him public enemy #1 as far as gmail is concerned. So most of his emails seem to be trapped by gmail as spam, resulting in me not seeing them. - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits) crypto: s390 - Fix aes-cbc IV corruption crypto: omap-aes - Fix CTR mode counter length crypto: omap-sham - Add missing modalias padata: make the sequence counter an atomic_t crypto: caam - Modify the interface layers to use JR API's crypto: caam - Add API's to allocate/free Job Rings crypto: caam - Add Platform driver for Job Ring hwrng: msm - Add PRNG support for MSM SoC's ARM: DT: msm: Add Qualcomm's PRNG driver binding document crypto: skcipher - Use eseqiv even on UP machines crypto: talitos - Simplify key parsing crypto: picoxcell - Simplify and harden key parsing crypto: ixp4xx - Simplify and harden key parsing crypto: authencesn - Simplify key parsing crypto: authenc - Export key parsing helper function crypto: mv_cesa: remove deprecated IRQF_DISABLED hwrng: OMAP3 ROM Random Number Generator support crypto: sha256_ssse3 - also test for BMI2 crypto: mv_cesa - Remove redundant of_match_ptr crypto: sahara - Remove redundant of_match_ptr ...
2013-11-22powerpc/booke: Only check for hugetlb in flush if vma != NULLScott Wood
And in flush_hugetlb_page(), don't check whether vma is NULL after we've already dereferenced it. This was found by Dan using static analysis as described here: https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-November/113161.html We currently get away with this because the callers that currently pass NULL for vma seem to be 32-bit-only (e.g. highmem, and CONFIG_DEBUG_PGALLOC in pgtable_32.c) Hugetlb is currently 64-bit only, so we never saw a NULL vma here. Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2013-11-22powerpc/85xx: typo in dts: "interupt" (four devices)Adam Borowski
These lines were inoperative for four years, which puts some doubt into their importance, and it's possible the fixed version will regress, but at the very least they should be removed instead. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supportedLEROY Christophe
Commit beb2dc0a7a84be003ce54e98b95d65cc66e6e536 breaks the MPC8xx which seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu despite what is written in the reference manual. This patch reverts to the use of mftb/mftbu when CONFIG_8xx is selected. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU wellTiejun Chen
If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64 into $CFLAGS. But Altivec option not allowed with e500mc64, then some compiling errors occur like this: CC arch/powerpc/lib/xor_vmx.o arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1 make: *** [arch/powerpc/lib] Error 2 So we should restrict e500mc64 in altivec scenario. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull DRM fixes from Dave Airlie: "I was going to leave this until post -rc1 but sysfs fixes broke hotplug in userspace, so I had to fix it harder, otherwise a set of pulls from intel, radeon and vmware, The vmware/ttm changes are bit larger but since its early and they are unlikely to break anything else I put them in, it lets vmware work with dri3" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits) drm/sysfs: fix hotplug regression since lifetime changes drm/exynos: g2d: fix memory leak to userptr drm/i915: Fix gen3 self-refresh watermarks drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data drm/radeon: hook up backlight functions for CI and KV family. drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket drm/i915: restore the early forcewake cleanup ...
2013-11-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Some small fixes for this merge window, most of them quite self explanatory - the biggest thing here is a fix for the ARMv7 LPAE suspend/resume support" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP ARM: 7892/1: Fix warning for V7M builds ARM: 7888/1: seccomp: not compatible with ARM OABI ARM: 7886/1: make OABI default to off ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume ARM: 7884/1: mm: Fix ECC mem policy printk ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case ARM: Fix nommu.c build warning
2013-11-22Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Gleb Natapov. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: kvm_clear_guest_page(): fix empty_zero_page usage kvm: mmu: delay mmu audit activation arm/arm64: KVM: Fix hyp mappings of vmalloc regions
2013-11-22Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull third set of powerpc updates from Benjamin Herrenschmidt: "This is a small collection of random bug fixes and a few improvements of Oops output which I deemed valuable enough to include as well. The fixes are essentially recent build breakage and regressions, and a couple of older bugs such as the DTL log duplication, the EEH issue with PCI_COMMAND_MASTER and the problem with small contexts passed to get/set_context with VSX enabled" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/signals: Mark VSX not saved with small contexts powerpc/pseries: Fix SMP=n build of rng.c powerpc: Make cpu_to_chip_id() available when SMP=n powerpc/vio: Fix a dma_mask issue of vio powerpc: booke: Fix build failures powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled powerpc: Only print PACATMSCRATCH in oops when TM is active powerpc/pseries: Duplicate dtl entries sometimes sent to userspace powerpc: Remove a few lines of oops output powerpc: Print DAR and DSISR on machine check oopses powerpc: Fix __get_user_pages_fast() irq handling powerpc/eeh: More accurate log powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges
2013-11-21x86, mm: do not leak page->ptl for pmd page tablesKirill A. Shutemov
There are two code paths how page with pmd page table can be freed: pmd_free() and pmd_free_tlb(). I've missed the second one and didn't add page table destructor call there. It leads to leak of page->ptl for pmd page tables, if dynamically allocated page->ptl is in use. The patch adds the missed destructor and modifies documentation accordingly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Andrey Vagin <avagin@openvz.org> Tested-by: Andrey Vagin <avagin@openvz.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-21Merge tag 'drm-intel-fixes-2013-11-20' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a small pile of fixes for bugs and a few regressions. I'm still trying to track down a driver load hang on my g33 (which infuriatingly doesn't happen when loading the module manually after boot), somehow bisecting loves to go astray on this one :( And there's a (harmless) locking WARN in the suspend code due to one of Jesse's vlv backlight rework patches. Otherwise nothing outstanding afaik. * tag 'drm-intel-fixes-2013-11-20' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix gen3 self-refresh watermarks drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/i915: restore the early forcewake cleanup Partially revert "drm/i915: tune the RC6 threshold for stability" drm/i915: flush cursors harder i915: Use 120MHz LVDS SSC clock for gen5/gen6/gen7 x86/early quirk: use gen6 stolen detection for VLV drm/i915/dp: set sink to power down mode on dp disable
2013-11-21powerpc/signals: Mark VSX not saved with small contextsMichael Neuling
The VSX MSR bit in the user context indicates if the context contains VSX state. Currently we set this when the process has touched VSX at any stage. Unfortunately, if the user has not provided enough space to save the VSX state, we can't save it but we currently still set the MSR VSX bit. This patch changes this to clear the MSR VSX bit when the user doesn't provide enough space. This indicates that there is no valid VSX state in the user context. This is needed to support get/set/make/swapcontext for applications that use VSX but only provide a small context. For example, getcontext in glibc provides a smaller context since the VSX registers don't need to be saved over the glibc function call. But since the program calling getcontext may have used VSX, the kernel currently says the VSX state is valid when it's not. If the returned context is then used in setcontext (ie. a small context without VSX but with MSR VSX set), the kernel will refuse the context. This situation has been reported by the glibc community. Based on patch from Carlos O'Donell. Tested-by: Haren Myneni <haren@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/pseries: Fix SMP=n build of rng.cMichael Ellerman
In commit a489043 "Implement arch_get_random_long() based on H_RANDOM" I broke the SMP=n build. We were getting plpar_wrappers.h via spinlock.h which breaks when SMP=n. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: Make cpu_to_chip_id() available when SMP=nMichael Ellerman
Up until now we have only used cpu_to_chip_id() in the topology code, which is only used on SMP builds. However my recent commit a4da0d5 "Implement arch_get_random_long/int() for powernv" added a usage when SMP=n, breaking the build. Move cpu_to_chip_id() into prom.c so it is available for SMP=n builds. We would move the extern to prom.h, but that breaks the include in topology.h. Instead we leave it in smp.h, but move it out of the CONFIG_SMP #ifdef. We also need to include asm/smp.h in rng.c, because the linux version skips asm/smp.h on UP. What a mess. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/vio: Fix a dma_mask issue of vioLi Zhong
I encountered following issue: [ 0.283035] ibmvscsi 30000015: couldn't initialize event pool [ 5.688822] ibmvscsi: probe of 30000015 failed with error -1 which prevents the storage from being recognized, and the machine from booting. After some digging, it seems that it is caused by commit 4886c399da as dma_mask pointer in viodev->dev is not set, so in dma_set_mask_and_coherent(), dma_set_coherent_mask() is not called because dma_set_mask(), which is dma_set_mask_pSeriesLP() returned EIO. While before the commit, dma_set_coherent_mask() is always called. I tried to replace dma_set_mask_and_coherent() with dma_coerce_mask_and_coherent(), and the machine could boot again. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: booke: Fix build failuresAneesh Kumar K.V
arch/powerpc/platforms/wsp/wsp.c: In function ‘wsp_probe_devices’: arch/powerpc/platforms/wsp/wsp.c:76:3: error: implicit declaration of function ‘of_address_to_resource’ [-Werror=implicit-function-declaration] Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: ppc64 address space capped at 32TB, mmap randomisation disabledAnton Blanchard
Commit fba2369e6ceb (mm: use vm_unmapped_area() on powerpc architecture) has a bug in slice_scan_available() where we compare an unsigned long (high_slices) against a shifted int. As a result, comparisons against the top 32 bits of high_slices (representing the top 32TB) always returns 0 and the top of our mmap region is clamped at 32TB This also breaks mmap randomisation since the randomised address is always up near the top of the address space and it gets clamped down to 32TB. Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michel Lespinasse <walken@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: Only print PACATMSCRATCH in oops when TM is activeAnton Blanchard
If TM is not active there is no need to print PACATMSCRATCH so we can save ourselves a line. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/pseries: Duplicate dtl entries sometimes sent to userspaceAnton Blanchard
When reading from the dispatch trace log (dtl) userspace interface, I sometimes see duplicate entries. One example: # hexdump -C dtl.out 00000000 07 04 00 0c 00 00 48 44 00 00 00 00 00 00 00 00 00000010 00 0c a0 b4 16 83 6d 68 00 00 00 00 00 00 00 00 00000020 00 00 00 00 10 00 13 50 80 00 00 00 00 00 d0 32 00000030 07 04 00 0c 00 00 48 44 00 00 00 00 00 00 00 00 00000040 00 0c a0 b4 16 83 6d 68 00 00 00 00 00 00 00 00 00000050 00 00 00 00 10 00 13 50 80 00 00 00 00 00 d0 32 The problem is in scan_dispatch_log() where we call dtl_consumer() but bail out before incrementing the index. To fix this I moved dtl_consumer() after the timebase comparison. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: Remove a few lines of oops outputAnton Blanchard
We waste quite a few lines in our oops output: ... MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI> CR: 28044024 XER: 00000000 SOFTE: 0 CFAR: 0000000000009088 DAR: 000000000000001c, DSISR: 40000000 GPR00: c0000000000c74f0 c00000037cc1b010 c000000000d2bb30 0000000000000000 ... We can do a better job here and remove 3 lines: MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI> CR: 28044024 XER: 00000000 CFAR: 0000000000009088 DAR: 0000000000000010, DSISR: 40000000 SOFTE: 1 GPR00: c0000000000e3d10 c00000037cc2fda0 c000000000d2c3a8 0000000000000001 Also move PACATMSCRATCH up, it doesn't really belong in the stack trace section. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: Print DAR and DSISR on machine check oopsesAnton Blanchard
Machine check exceptions set DAR and DSISR, so print them in our oops output. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc: Fix __get_user_pages_fast() irq handlingHeiko Carstens
__get_user_pages_fast() may be called with interrupts disabled (see e.g. get_futex_key() in kernel/futex.c) and therefore should use local_irq_save() and local_irq_restore() instead of local_irq_disable()/enable(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> CC: <stable@vger.kernel.org> [v3.12] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/eeh: More accurate logGavin Shan
This clarifies in the log whether the error is a global PHB error or an individual PE being frozen. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridgesGavin Shan
On PHB3, we will fail to fetch IODA tables without PCI_COMMAND_MASTER on PCI bridges. According to one experiment I had, the MSIx interrupts didn't raise from the adapter without the bit applied to all upstream PCI bridges including root port of the adapter. The patch forces to have that bit enabled accordingly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>