aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-07-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - A set of of OMAP patches that we had missed Tony's pull request of: * Reset fix for am43xx * Proper OPP table for omap5 * Fix for SoC detection of one of the DRA7 SoCs * hwmod updates to get SATA and OCP to work on omap5 (drivers merged in 3.16) * ... plus a handful of smaller fixes - sunxi needed to re-add machine specific restart code that was removed in anticipation of a watchdog driver being merged for 3.16, and it didn't make it in. - Marvell fixes for PCIe on SMP and a big-endian fix. - A trivial defconfig update to make my capri test board boot with bcm_defconfig again. ... and a couple of MAINTAINERS updates, one to claim new Keystone drivers that have been merged, and one to merge MXS and i.MX (both Freescale platforms). The largest diffs come from the hwmod code for omap5 and the re-add of the restart code on sunxi. The hwmod stuff is quite late at this point but it slipped through cracks repeatedly while coming up the maintainer chain and only affects the one SoC so risk is low" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add few more Keystone drivers MAINTAINERS: merge MXS entry into IMX one ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk ARM: bcm: Fix bcm and multi_v7 defconfigs ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-05Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 fixes from Catalin Marinas: - Exception level check at boot time (for completeness, not triggering any bug before) - I/D-cache synchronisation logic for huge pages - Config symbol typo * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix el2_setup check of CurrentEL arm64: mm: Make icache synchronisation logic huge page aware arm64: mm: Fix horrendous config typo
2014-07-04Merge tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-04ARM: sunxi: Reintroduce the restart code for A10/A20 SoCsMaxime Ripard
This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-04Merge tag 'omap-for-v3.16/fixes-against-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge OMAP fixes from Tony Lindgren: Fixes for omaps for issues discovered during the merge window and enabling of a few features that had to wait for the driver dependencies to clear. The fixes included are: - Fix am43xx hard reset flags - Fix SoC detection for DRA722 - Fix CPU OPP table for omap5 - Fix legacy mux parser bug if requested muxname is a prefix of multiple mux entries - Fix qspi interrupt binding that relies on the irq crossbar that has not yet been enabled - Add missing phy_sel for am43x-epos-evm - Drop unused gic_init_irq() that is no longer needed And the enabling of features that had driver dependencies are: - Change dra7 to use Audio Tracking Logic clock instead of a fixed clock now that the clock driver for it has been merged - Enable off idle configuration for selected omaps as all the kernel dependencies for device tree based booting are finally merged as this is needed to get the automated PM tests working finally with device tree based booting - Add hwmod entry for ocp2scp3 for omap5 to get sata working as all the driver dependencies are now in the kernel and this patch fell through the cracks during the merge window * tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-04arm64: fix el2_setup check of CurrentELMarc Zyngier
The CurrentEL system register reports the Current Exception Level of the CPU. It doesn't say anything about the stack handling, and yet we compare it to PSR_MODE_EL2t and PSR_MODE_EL2h. It works by chance because PSR_MODE_EL2t happens to match the right bits, but that's otherwise a very bad idea. Just check for the EL value instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: fixed arch/arm64/kernel/efi-entry.S] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-04arm64: mm: Make icache synchronisation logic huge page awareSteve Capper
The __sync_icache_dcache routine will only flush the dcache for the first page of a compound page, potentially leading to stale icache data residing further on in a hugetlb page. This patch addresses this issue by taking into consideration the order of the page when flushing the dcache. Reported-by: Mark Brown <broonie@linaro.org> Tested-by: Mark Brown <broonie@linaro.org> Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
2014-07-04arm64: mm: Fix horrendous config typoSteve Capper
The define ARM64_64K_PAGES is tested for rather than CONFIG_ARM64_64K_PAGES. Correct that typo here. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-03ptrace,x86: force IRET path after a ptrace_stop()Tejun Heo
The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "A bunch of one-liners (except the s390 one). The two more serious bugs ("KVM: SVM: Fix CPL export via SS.DPL" and "KVM: s390: add sie.h uapi header file to Kbuild and remove header dependency") were introduced in the 3.16 merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Fix CPL export via SS.DPL KVM: s390: add sie.h uapi header file to Kbuild and remove header dependency MIPS: KVM: Fix memory leak on VCPU KVM: x86: preserve the high 32-bits of the PAT register kvm: fix wrong address when writing Hyper-V tsc page KVM: x86: Increase the number of fixed MTRR regs to 10
2014-06-30ARM: mvebu: fix cpuidle implementation to work on big-endian systemsThomas Petazzoni
On Marvell Armada XP, when a CPU comes back from deep idle state of cpuidle, it restarts its execution at armada_370_xp_cpu_resume(), which puts back the CPU into the coherency, and then calls the generic cpu_resume() function. While this works on little-endian configurations, it doesn't work on big-endian configurations because the CPU restarts in little-endian, and therefore must be switched back to big-endian to operate properly. To achieve this, a 'setend be' instruction must be executed in big-endian configurations. However, the ARM_BE8() macro that is used to implement nice compile-time conditional for ARM LE vs. ARM BE8 is not easily usable in inline assembly. Therefore, this patch moves the armada_370_xp_cpu_resume() C function, which was anyway just a block of inline assembly, into a proper pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be) instruction. Without this patch, an Armada XP big endian configuration with cpuidle enabled fails to boot, as it hangs as soon as one of the CPU hits the deep idle state. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanupThomas Petazzoni
Commit 497a92308af8e9385fa3d135f7f416a997e4b93b ("ARM: mvebu: implement L2/PCIe deadlock workaround") introduced some logic in coherency.c to adjust the PL310 cache controller Device Tree node of Armada 375 and Armada 38x platform to include the 'arm,io-coherent' property if the system is running with hardware I/O coherency enabled. However, with the L2CC driver cleanup done by Russell King, the initialization of the L2CC driver has been moved earlier, and is now part of the init_IRQ() ARM function in arch/arm/kernel/irq.c. Therefore, calling coherency_init() in ->init_time() is now too late, as the Device Tree property gets added too late (after the L2CC driver has been initialized). In order to fix this, this commit removes the ->init_time() callback use in board-v7.c and replaces it with an ->init_irq() callback. We therefore no longer use the default ->init_irq() callback, but we now use the default ->init_time() callback. In this newly introduced ->init_irq() callback, we call irqchip_init() which is the default behavior when ->init_irq() isn't defined, and then do the initialization related to the coherency: SCU, coherency fabric, and mvebu-mbus (which is needed to start secondary CPUs). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: move Armada 375 external abort logic as a quirkThomas Petazzoni
In preparation to a small re-organization of the initialization sequence in board-v7.c, this commit moves the registration of the custom external abort handler on Armada 375 later in the boot sequence, and makes it more similar to the other quirks that we already have. There is indeed no need to register this abort handler particularly early, it simply needs to be registered before switching to userspace. In addition to this, this commit makes the registration of the custom abort handler conditional on Armada 375 Z1, because Armada 375 A0 and later iterations are not affected by the issue. This commit was tested on both Armada 375 Z1 and Armada 375 A0 platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30Merge commit '33b458d276bb' into kvm-masterPaolo Bonzini
2014-06-30KVM: SVM: Fix CPL export via SS.DPLJan Kiszka
We import the CPL via SS.DPL since ae9fedc793. However, we fail to export it this way so far. This caused spurious guest crashes, e.g. of Linux when accessing the vmport from guest user space which triggered register saving/restoring to/from host user space. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-29Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another round of ARM fixes. The largest change here is the L2 changes to work around problems for the Armada 37x/380 devices, where most of the size comes down to comments rather than code. The other significant fix here is for the ptrace code, to ensure that rewritten syscalls work as intended. This was pointed out by Kees Cook, but Will Deacon reworked the patch to be more elegant. The remainder are fairly trivial changes" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check ARM: 8086/1: Set memblock limit for nommu ARM: 8085/1: sa1100: collie: add top boot mtd partition ARM: 8084/1: sa1100: collie: revert back to cfi_probe ARM: 8080/1: mcpm.h: remove unused variable declaration ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache
2014-06-29ARM: 8087/1: ptrace: reload syscall number after secure_computing() checkWill Deacon
On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8086/1: Set memblock limit for nommuLaura Abbott
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8085/1: sa1100: collie: add top boot mtd partitionAndrea Adami
The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8084/1: sa1100: collie: revert back to cfi_probeAndrea Adami
Reverts commit d26b17edafc45187c30cae134a5e5429d58ad676 ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8080/1: mcpm.h: remove unused variable declarationNicolas Pitre
The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8076/1: mm: add support for HW coherent systems in PL310 cacheThomas Petazzoni
When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-27Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling. It turns out that removing the section headers from the VDSO breaks gdb, so this puts back most of them. A very simple typo broke rt_sigreturn on some versions of glibc, with obviously disastrous results. The rest is pretty much fixes for the corresponding fallout. The EFI fixes fixes an arithmetic overflow on 32-bit systems and quiets some build warnings. Finally, when invoking an invalid system call number on x86-32, we bypass a bunch of handling, which can make the audit code oops" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi-pstore: Fix an overflow on 32-bit builds x86/vdso: Error out in vdso2c if DT_RELA is present x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile x86_32, signal: Fix vdso rt_sigreturn x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508) x86/vdso: Create .build-id links for unstripped vdso files x86/vdso: Remove some redundant in-memory section headers x86/vdso: Improve the fake section headers x86/vdso2c: Use better macros for ELF bitness x86/vdso: Discard the __bug_table section efi: Fix compiler warnings (unused, const, type)
2014-06-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "This is dominated by a large number of changes necessary for the MIPS BPF code. code. Aside of that there are - a fix for the MSC system controller support code. - a Turbochannel fix. - a recordmcount fix that's MIPS-specific. - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere in the kernel. - revert support for MSA registers in the signal frames. The reverted patch did modify the signal stack frame which of course is inacceptable. - fix math-emu build breakage with older compilers. - some related cleanup. - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits) MIPS: Lasat: Fix build error if CRC32 is not enabled. TC: Handle device_register() errors. MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64 MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register MIPS: bpf: Fix PKT_TYPE case for big-endian cores MIPS: BPF: Prevent kernel fall over for >=32bit shifts MIPS: bpf: Drop update_on_xread and always initialize the X register MIPS: bpf: Fix is_range() semantics MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case MIPS: bpf: Use correct mask for VLAN_TAG case MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases MIPS: bpf: Return error code if the offset is a negative number MIPS: bpf: Use the LO register to get division's quotient MIPS: mm: uasm: Fix lh micro-assembler instruction MIPS: uasm: Add SLT uasm instruction MIPS: uasm: Add s3s1s2 instruction builder ...
2014-06-27Merge tag 'arc-fixes-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Some SMP changes, a ptrace request for NPTL debugging, bunch of build breakages/warnings" * tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [SMP] Enable icache coherency ARC: [SMP] Fix IPI IRQ registration ARC: Implement ptrace(PTRACE_GET_THREAD_AREA) ARC: optimize kernel bss clearing in early boot code ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND ARC: fix build warning in devtree ARC: remove checks for CONFIG_ARC_MMU_V4
2014-06-27Merge tag 'kvms390-20140626' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master Fix sie.h header related problems introduced during the 3.16 development cycle.
2014-06-26ARM: bcm: Fix bcm and multi_v7 defconfigsOlof Johansson
BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter <matt.porter@linaro.org> Cc: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-26MIPS: Lasat: Fix build error if CRC32 is not enabled.Ralf Baechle
Kconfig doesn't select CRC32 so it's possible to build a Lasat kernel without CONFIG_CRC32 resulting in a build error: LD vmlinux arch/mips/built-in.o: In function `lasat_init_board_info': (.text+0x22c): undefined reference to `crc32_le' arch/mips/built-in.o: In function `lasat_write_eeprom_info': (.text+0x7fc): undefined reference to `crc32_le' make: *** [vmlinux] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd regionMarkos Chandras
Previously, the lower limit for the MIPS SC initialization loop was set incorrectly allowing one extra loop leading to writes beyond the MSC ioremap'd space. More precisely, the value of the 'imp' in the last loop increased beyond the msc_irqmap_t boundaries and as a result of which, the 'n' variable was loaded with an incorrect value. This value was used later on to calculate the offset in the MSC01_IC_SUP which led to random crashes like the following one: CPU 0 Unable to handle kernel paging request at virtual address e75c0200, epc == 8058dba4, ra == 8058db90 [...] Call Trace: [<8058dba4>] init_msc_irqs+0x104/0x154 [<8058b5bc>] arch_init_irq+0xd8/0x154 [<805897b0>] start_kernel+0x220/0x36c Kernel panic - not syncing: Attempted to kill the idle task! This patch fixes the problem Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7118/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64Markos Chandras
When allocating stack space for BPF memwords we need to use the appropriate 32 or 64-bit instruction to avoid losing the top 32 bits of the stack pointer. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7135/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: BPF: Use 32 or 64-bit load instruction to load an address to registerMarkos Chandras
When loading a pointer to register we need to use the appropriate 32 or 64bit instruction to preserve the pointers' top 32bits. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Fix PKT_TYPE case for big-endian coresMarkos Chandras
The skb->pkt_type field is defined as follows: u8 pkt_type:3, fclone:2, ipvs_property:1, peeked:1, nf_trace:1 resulting to the following layout in big-endian systems [pkt_type][fclone][ipvs_propery][peeked][nf_trace] ^ ^ | | LSB MSB As a result, the existing code did not work because it was trying to match pkt_type == 7 whereas in reality it is 7<<5 on big-endian systems. This has been fixed in the interpreter in 0dcceabb0c1bf2d4c12a748df9933fad303072a7 "net: filter: fix SKF_AD_PKTTYPE extension on big-endian" The fix is to look for 7<<5 on big-endian systems for the pkt_type field, and shift by 5 so the packet type will be at the lower 3 bits of the A register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: BPF: Prevent kernel fall over for >=32bit shiftsMarkos Chandras
Remove BUG_ON() if the shift immediate is >=32 to avoid kernel crashes due to malicious user input. If the shift immediate is >= 32, we simply load the destination register with 0 since only 32-bit instructions are used by JIT so this will do the correct thing even on MIPS64. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7179/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Drop update_on_xread and always initialize the X registerMarkos Chandras
Previously, update_on_xread() only set the reset flag if SEEN_X hasn't been set already. However, SEEN_X is used to indicate that X is used as destination or source register so there are some cases where X is only used as source register and we really need to make sure that it has been initialized in time. As a result of which, drop this function and always set X to zero if it's used in any of the opcodes. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Fix is_range() semanticsMarkos Chandras
is_range() was meant to check whether the number is within the s16 range or not. However the return values and consumers expected the exact opposite. We fix that by inverting the logic in the function to return 'true' for < s16 and 'false' for > s16. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reported-by: Alexei Starovoitov <ast@plumgrid.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7131/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodesMarkos Chandras
We should prevent spamming the logs during normal execution of bpf-jit. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Suggested-by: Alexei Starovoitov <ast@plumgrid.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7129/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Fix return values for VLAN_TAG_PRESENT caseMarkos Chandras
If VLAN_TAG_PRESENT is not zero, then return 1 as expected by classic BPF. Otherwise return 0. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7128/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Use correct mask for VLAN_TAG caseMarkos Chandras
Using VLAN_VID_MASK is not correct to get the vlan tag. Use ~VLAN_PRESENT_MASK instead and make sure it's u16 so the top 16-bits will be removed. This will ensure that the emit_andi() code will not treat this as a big 32-bit unsigned value. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7127/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} casesMarkos Chandras
The sltiu and sltu instructions will set the scratch register to 1 if A <= X|K so fix the emitted branch conditional to check for scratch != zero rather than scratch >= zero which would complicate the resuling branch logic given that MIPS does not have a BGT or BGET instructions to compare general purpose registers directly. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7126/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPEMarkos Chandras
The SKF_AD_PKTTYPE uses the skb pointer so make sure it's in the flags so it will be initialized in time. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7125/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Use 'andi' instead of 'and' for the VLAN casesMarkos Chandras
The VLAN_VID_MASK and VLAN_TAG_PRESENT are immediates, so using 'and' which expects 3 registers will produce wrong results. Fix this by using the 'andi' instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7124/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Return error code if the offset is a negative numberMarkos Chandras
Previously, the negative offset was not checked leading to failures due to trying to load data beyond the skb struct boundaries. Until we have proper asm helpers in place, it's best if we return ENOSUPP if K is negative when trying to JIT the filter or 0 during runtime if we do an indirect load where the value of X is unknown during build time. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7123/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: bpf: Use the LO register to get division's quotientMarkos Chandras
Reading from the HI register to get the division result is wrong. The quotient is placed in the LO register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7122/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: mm: uasm: Fix lh micro-assembler instructionMarkos Chandras
Commit d6b3314b49e12e8c349deb4ca28e7028db00728f "MIPS: uasm: Add lh uam instruction" added the 'lh' micro-assembler instruction but it used the 'lw' opcode for it. Fix it by using the correct 'lh' opcode. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7121/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: uasm: Add SLT uasm instructionMarkos Chandras
It will be used later on by bpf-jit Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7120/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: uasm: Add s3s1s2 instruction builderMarkos Chandras
It will be used later on by the SLT instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: BPF JIT: Fix build error.Daniel Borkmann
mips: allmodconfig fails in 3.16-rc1 with lots of undefined symbols. arch/mips/net/bpf_jit.c: In function 'is_load_to_a': arch/mips/net/bpf_jit.c:559:7: error: 'BPF_S_LD_W_LEN' undeclared (first use in this function) arch/mips/net/bpf_jit.c:559:7: note: each undeclared identifier is reported only once for each function it appears in arch/mips/net/bpf_jit.c:560:7: error: 'BPF_S_LD_W_ABS' undeclared (first use in this function) [...] The reason behind this is that 3480593131e0 ("net: filter: get rid of BPF_S_* enum") was routed via net-next tree, that takes all BPF-related changes, at a time where MIPS BPF JIT was not part of net-next, while c6610de353da ("MIPS: net: Add BPF JIT") was routed via mips arch tree and went into mainline within the same merge window. Thus, fix it up by converting BPF_S_* in a similar fashion as in 3480593131e0 for MIPS. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Cc: Linux MIPS Mailing List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7099/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26Revert "MIPS: Save/restore MSA context around signals"Paul Burton
This reverts commit eec43a224cf1 "MIPS: Save/restore MSA context around signals" and the MSA parts of ca750649e08c "MIPS: kernel: signal: Prevent save/restore FPU context in user memory" (the restore path of which appears incorrect anyway...). The reverted patch took care not to break compatibility with userland users of struct sigcontext, but inadvertantly changed the offset of the uc_sigmask field of struct ucontext. Thus Linux v3.15 breaks the userland ABI. The MSA context will need to be saved via some other opt-in mechanism, but for now revert the change to reduce the fallout. This will have minimal impact upon use of MSA since the only supported CPU which includes it (the P5600) is 32-bit and therefore requires that the experimental CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option be selected before the kernel will set FR=1 for a task, a requirement for MSA use. Thus the users of MSA are limited to known small groups of people & this patch won't be breaking any previously working MSA-using userland outside of experimental settings. [ralf@linux-mips.org: Fixed rejects.] Cc: stable@vger.kernel.org Reported-by: Joseph S. Myers <joseph@codesourcery.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7107/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26MIPS: math-emu: Reduce code duplication.Ralf Baechle
The fix in the preceeding commit did do exactly the same thing in two places showing some code cleanup was due. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-26KVM: s390: add sie.h uapi header file to Kbuild and remove header dependencyHeiko Carstens
sie.h was missing in arch/s390/include/uapi/asm/Kbuild and therefore missed the "make headers_check" target. If added it reveals that also arch/s390/include/asm/sigp.h would become uapi. This is something we certainly do not want. So remove that dependency as well. The header file was merged with ceae283bb2e0176c "KVM: s390: add sie exit reasons tables", therefore we never had a kernel release with this commit and can still change anything. Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>