| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The two main things to note are:
(1) The bulk of the diffstat is us reverting a horrible bodge we had
in place to ease the merging of maple tree during the merge
window (which turned out not to be needed, but anyway)
(2) The TLB invalidation fix is done in core code, as suggested by
(and Acked-by) Peter.
Summary:
- Revert temporary bodge in MTE coredumping to ease maple tree integration
- Fix stack frame size warning reported with 64k pages
- Fix stop_machine() race with instruction text patching
- Ensure alternatives patching routines are not instrumented
- Enable Spectre-BHB mitigation for Cortex-A78AE
- Fix hugetlb TLB invalidation when contiguous hint is used
- Minor perf driver fixes
- Fix some typos"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
arm64: Add part number for Arm Cortex-A78AE
arm64: patch_text: Fixup last cpu should be master
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
arm64: alternatives: mark patch_alternative() as `noinstr`
perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER
perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
arm64: Fix comments in macro __init_el2_gicv3
arm64: fix typos in comments
arch/arm64: Fix topology initialization for core scheduling
arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()
Revert "arm64: Change elfcore for_each_mte_vma() to use VMA iterator"
|
|
Add the MIDR part number info for the Arm Cortex-A78AE[1] and add it to
spectre-BHB affected list[2].
[1]: https://developer.arm.com/Processors/Cortex-A78AE
[2]: https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220407091128.8700-1-chanho61.park@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
Fixes: ae16480785de ("arm64: introduce interfaces to hotpatch kernel and module code")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220407073323.743224-2-guoren@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The x86 MSI message data is 32 bits in total and is either in
compatibility or remappable format, see Intel Virtualization Technology
for Directed I/O, section 5.1.2.
Fixes: 6285aa50736 ("x86/msi: Provide msi message shadow structs")
Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
|
|
Bernardo reported an error that Nathan bisected down to
(x86_64) defconfig+LTO_CLANG_FULL+X86_PMEM_LEGACY.
LTO vmlinux.o
ld.lld: error: <instantiation>:1:13: redefinition of 'found'
.set found, 0
^
<inline asm>:29:1: while in macro instantiation
extable_type_reg reg=%eax, type=(17 | ((0) << 16))
^
This appears to be another LTO specific issue similar to what was folded
into commit 4b5305decc84 ("x86/extable: Extend extable functionality"),
where the `.set found, 0` in DEFINE_EXTABLE_TYPE_REG in
arch/x86/include/asm/asm.h conflicts with the symbol for the static
function `found` in arch/x86/kernel/pmem.c.
Assembler .set directive declare symbols with global visibility, so the
assembler may not rename such symbols in the event of a conflict. LTO
could rename static functions if there was a conflict in C sources, but
it cannot see into symbols defined in inline asm.
The symbols are also retained in the symbol table, regardless of LTO.
Give the symbols .L prefixes making them locally visible, so that they
may be renamed for LTO to avoid conflicts, and to drop them from the
symbol table regardless of LTO.
Fixes: 4b5305decc84 ("x86/extable: Extend extable functionality")
Reported-by: Bernardo Meurer Costa <beme@google.com>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220329202148.2379697-1-ndesaulniers@google.com
|
|
Clang can inline emit_indirect_jump() and then folds constants, which
results in:
| vmlinux.o: warning: objtool: emit_bpf_dispatcher()+0x6a4: relocation to !ENDBR: .text.__x86.indirect_thunk+0x40
| vmlinux.o: warning: objtool: emit_bpf_dispatcher()+0x67d: relocation to !ENDBR: .text.__x86.indirect_thunk+0x40
| vmlinux.o: warning: objtool: emit_bpf_tail_call_indirect()+0x386: relocation to !ENDBR: .text.__x86.indirect_thunk+0x20
| vmlinux.o: warning: objtool: emit_bpf_tail_call_indirect()+0x35d: relocation to !ENDBR: .text.__x86.indirect_thunk+0x20
Suppress the optimization such that it must emit a code reference to
the __x86_indirect_thunk_array[] base.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lkml.kernel.org/r/20220405075531.GB30877@worktop.programming.kicks-ass.net
|
|
This reverts commit 602946ec2f90d5bd965857753880db29d2d9a1e9.
If CONFIG_HIGHMEM is enabled, no highmem will be added with max_mapnr
set to max_low_pfn, see mem_init():
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
...
free_highmem_page();
}
Now that virt_addr_valid() has been fixed in the previous commit, we can
revert the change to max_mapnr.
Fixes: 602946ec2f90 ("powerpc: Set max_mapnr correctly")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Erhard F. <erhard_f@mailbox.org>
[mpe: Update change log to reflect series reordering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-2-mpe@ellerman.id.au
|
|
mpe: On 64-bit Book3E vmalloc space starts at 0x8000000000000000.
Because of the way __pa() works we have:
__pa(0x8000000000000000) == 0, and therefore
virt_to_pfn(0x8000000000000000) == 0, and therefore
virt_addr_valid(0x8000000000000000) == true
Which is wrong, virt_addr_valid() should be false for vmalloc space.
In fact all vmalloc addresses that alias with a valid PFN will return
true from virt_addr_valid(). That can cause bugs with hardened usercopy
as described below by Kefeng Wang:
When running ethtool eth0 on 64-bit Book3E, a BUG occurred:
usercopy: Kernel memory exposure attempt detected from SLUB object not in SLUB page?! (offset 0, size 1048)!
kernel BUG at mm/usercopy.c:99
...
usercopy_abort+0x64/0xa0 (unreliable)
__check_heap_object+0x168/0x190
__check_object_size+0x1a0/0x200
dev_ethtool+0x2494/0x2b20
dev_ioctl+0x5d0/0x770
sock_do_ioctl+0xf0/0x1d0
sock_ioctl+0x3ec/0x5a0
__se_sys_ioctl+0xf0/0x160
system_call_exception+0xfc/0x1f0
system_call_common+0xf8/0x200
The code shows below,
data = vzalloc(array_size(gstrings.len, ETH_GSTRING_LEN));
copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN))
The data is alloced by vmalloc(), virt_addr_valid(ptr) will return true
on 64-bit Book3E, which leads to the panic.
As commit 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va
and __pa addresses") does, make sure the virt addr above PAGE_OFFSET in
the virt_addr_valid() for 64-bit, also add upper limit check to make
sure the virt is below high_memory.
Meanwhile, for 32-bit PAGE_OFFSET is the virtual address of the start
of lowmem, high_memory is the upper low virtual address, the check is
suitable for 32-bit, this will fix the issue mentioned in commit
602946ec2f90 ("powerpc: Set max_mapnr correctly") too.
On 32-bit there is a similar problem with high memory, that was fixed in
commit 602946ec2f90 ("powerpc: Set max_mapnr correctly"), but that
commit breaks highmem and needs to be reverted.
We can't easily fix __pa(), we have code that relies on its current
behaviour. So for now add extra checks to virt_addr_valid().
For 64-bit Book3S the extra checks are not necessary, the combination of
virt_to_pfn() and pfn_valid() should yield the correct result, but they
are harmless.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add additional change log detail]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-1-mpe@ellerman.id.au
|
|
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After resuming from suspend-to-RAM, the MSRs that control CPU's
speculative execution behavior are not being restored on the boot CPU.
These MSRs are used to mitigate speculative execution vulnerabilities.
Not restoring them correctly may leave the CPU vulnerable. Secondary
CPU's MSRs are correctly being restored at S3 resume by
identify_secondary_cpu().
During S3 resume, restore these MSRs for boot CPU when restoring its
processor state.
Fixes: 772439717dbf ("x86/bugs/intel: Set proper CPU features and setup RDS")
Reported-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR. This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle. The more invalid MSRs,
higher the impact will be.
Check and save the MSR validity at setup. This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.
Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the pseries vas sysfs code to use default_groups field
which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Haren Myneni <haren@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220329142552.558339-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The macro __WARN_FLAGS() uses a local variable named "f". This being a
common name, there is a risk of shadowing other variables.
For example, GCC would yield:
| In file included from ./include/linux/bug.h:5,
| from ./include/linux/cpumask.h:14,
| from ./arch/x86/include/asm/cpumask.h:5,
| from ./arch/x86/include/asm/msr.h:11,
| from ./arch/x86/include/asm/processor.h:22,
| from ./arch/x86/include/asm/timex.h:5,
| from ./include/linux/timex.h:65,
| from ./include/linux/time32.h:13,
| from ./include/linux/time.h:60,
| from ./include/linux/stat.h:19,
| from ./include/linux/module.h:13,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h: In function 'rcu_head_after_call_rcu':
| ./arch/x86/include/asm/bug.h:80:21: warning: declaration of 'f' shadows a parameter [-Wshadow]
| 80 | __auto_type f = BUGFLAG_WARNING|(flags); \
| | ^
| ./include/asm-generic/bug.h:106:17: note: in expansion of macro '__WARN_FLAGS'
| 106 | __WARN_FLAGS(BUGFLAG_ONCE | \
| | ^~~~~~~~~~~~
| ./include/linux/rcupdate.h:1007:9: note: in expansion of macro 'WARN_ON_ONCE'
| 1007 | WARN_ON_ONCE(func != (rcu_callback_t)~0L);
| | ^~~~~~~~~~~~
| In file included from ./include/linux/rbtree.h:24,
| from ./include/linux/mm_types.h:11,
| from ./include/linux/buildid.h:5,
| from ./include/linux/module.h:14,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h:1001:62: note: shadowed declaration is here
| 1001 | rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
| | ~~~~~~~~~~~~~~~^
For reference, sparse also warns about it, c.f. [1].
This patch renames the variable from f to __flags (with two underscore
prefixes as suggested in the Linux kernel coding style [2]) in order
to prevent collisions.
[1] https://lore.kernel.org/all/CAFGhKbyifH1a+nAMCvWM88TK6fpNPdzFtUXPmRGnnQeePV+1sw@mail.gmail.com/
[2] Linux kernel coding style, section 12) Macros, Enums and RTL,
paragraph 5) namespace collisions when defining local variables in
macros resembling functions
https://www.kernel.org/doc/html/latest/process/coding-style.html#macros-enums-and-rtl
Fixes: bfb1a7c91fb7 ("x86/bug: Merge annotate_reachable() into_BUG_FLAGS() asm")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220324023742.106546-1-mailhol.vincent@wanadoo.fr
|
|
On Sapphire Rapids, the FRONTEND_RETIRED.MS_FLOWS event requires the
FRONTEND MSR value 0x8. However, the current FRONTEND MSR mask doesn't
support it.
Update intel_spr_extra_regs[] to support it.
Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1648482543-14923-2-git-send-email-kan.liang@linux.intel.com
|
|
The INST_RETIRED.PREC_DIST event (0x0100) doesn't count on SPR.
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
607,246 cpu/event=0xc0,umask=0x0/
0 cpu/event=0x0,umask=0x1/
The encoding for INST_RETIRED.PREC_DIST is pseudo-encoding, which
doesn't work on the generic counters. However, current perf extends its
mask to the generic counters.
The pseudo event-code for a fixed counter must be 0x00. Check and avoid
extending the mask for the fixed counter event which using the
pseudo-encoding, e.g., ref-cycles and PREC_DIST event.
With the patch,
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
583,184 cpu/event=0xc0,umask=0x0/
583,048 cpu/event=0x0,umask=0x1/
Fixes: 2de71ee153ef ("perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1648482543-14923-1-git-send-email-kan.liang@linux.intel.com
|
|
The uncore PMU of the Raptor Lake is the same as Alder Lake.
Add new PCIIDs of IMC for Raptor Lake.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-4-git-send-email-kan.liang@linux.intel.com
|
|
Raptor Lake is Intel's successor to Alder lake. PPERF and SMI_COUNT MSRs
are also supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-3-git-send-email-kan.liang@linux.intel.com
|
|
Raptor Lake is Intel's successor to Alder lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Alder lake.
Share adl_cstates with Alder lake.
Update the comments for Raptor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-2-git-send-email-kan.liang@linux.intel.com
|
|
From PMU's perspective, Raptor Lake is the same as the Alder Lake. The
only difference is the event list, which will be supported in the perf
tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-1-git-send-email-kan.liang@linux.intel.com
|
|
The volatile attribute in the inline assembly of arch_raw_cpu_ptr()
forces the compiler to always generate the code, even if the compiler
can decide upfront that its result is not needed.
For instance invoking __intel_pmu_disable_all(false) (like
intel_pmu_snapshot_arch_branch_stack() does) leads to loading the
address of &cpu_hw_events into the register while compiler knows that it
has no need for it. This ends up with code like:
| movq $cpu_hw_events, %rax #, tcp_ptr__
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| xorl %eax, %eax # tmp93
It also creates additional code within local_lock() with !RT &&
!LOCKDEP which is not desired.
By removing the volatile attribute the compiler can place the
function freely and avoid it if it is not needed in the end.
By using the function twice the compiler properly caches only the
variable offset and always loads the CPU-offset.
this_cpu_ptr() also remains properly placed within a preempt_disable()
sections because
- arch_raw_cpu_ptr() assembly has a memory input ("m" (this_cpu_off))
- prempt_{dis,en}able() fundamentally has a 'barrier()' in it
Therefore this_cpu_ptr() is already properly serialized and does not
rely on the 'volatile' attribute.
Remove volatile from arch_raw_cpu_ptr().
[ bigeasy: Added Linus' explanation why this_cpu_ptr() is not moved out
of a preempt_disable() section without the 'volatile' attribute. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220328145810.86783-2-bigeasy@linutronix.de
|
|
When a static call is updated with __static_call_return0() as target,
arch_static_call_transform() set it to use an optimised set of
instructions which are meant to lay in the same cacheline.
But when initialising a static call with DEFINE_STATIC_CALL_RET0(),
we get a branch to the real __static_call_return0() function instead
of getting the optimised setup:
c00d8120 <__SCT__perf_snapshot_branch_stack>:
c00d8120: 4b ff ff f4 b c00d8114 <__static_call_return0>
c00d8124: 3d 80 c0 0e lis r12,-16370
c00d8128: 81 8c 81 3c lwz r12,-32452(r12)
c00d812c: 7d 89 03 a6 mtctr r12
c00d8130: 4e 80 04 20 bctr
c00d8134: 38 60 00 00 li r3,0
c00d8138: 4e 80 00 20 blr
c00d813c: 00 00 00 00 .long 0x0
Add ARCH_DEFINE_STATIC_CALL_RET0_TRAMP() defined by each architecture
to setup the optimised configuration, and rework
DEFINE_STATIC_CALL_RET0() to call it:
c00d8120 <__SCT__perf_snapshot_branch_stack>:
c00d8120: 48 00 00 14 b c00d8134 <__SCT__perf_snapshot_branch_stack+0x14>
c00d8124: 3d 80 c0 0e lis r12,-16370
c00d8128: 81 8c 81 3c lwz r12,-32452(r12)
c00d812c: 7d 89 03 a6 mtctr r12
c00d8130: 4e 80 04 20 bctr
c00d8134: 38 60 00 00 li r3,0
c00d8138: 4e 80 00 20 blr
c00d813c: 00 00 00 00 .long 0x0
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1e0a61a88f52a460f62a58ffc2a5f847d1f7d9d8.1647253456.git.christophe.leroy@csgroup.eu
|
|
Paolo reported that the instruction sequence that is used to replace:
call __static_call_return0
namely:
66 66 48 31 c0 data16 data16 xor %rax,%rax
decodes to something else on i386, namely:
66 66 48 data16 dec %ax
31 c0 xor %eax,%eax
Which is a nonsensical sequence that happens to have the same outcome.
*However* an important distinction is that it consists of 2
instructions which is a problem when the thing needs to be overwriten
with a regular call instruction again.
As such, replace the instruction with something that decodes the same
on both i386 and x86_64.
Fixes: 3f2a8fc4b15d ("static_call/x86: Add __static_call_return0()")
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220318204419.GT8939@worktop.programming.kicks-ass.net
|
|
0day reported a regression on a microbenchmark which is intended to
stress the TLB flushing path:
https://lore.kernel.org/all/20220317090415.GE735@xsang-OptiPlex-9020/
It pointed at a commit from Nadav which intended to remove retpoline
overhead in the TLB flushing path by taking the 'cond'-ition in
on_each_cpu_cond_mask(), pre-calculating it, and incorporating it into
'cpumask'. That allowed the code to use a bunch of earlier direct
calls instead of later indirect calls that need a retpoline.
But, in practice, threads can go idle (and into lazy TLB mode where
they don't need to flush their TLB) between the early and late calls.
It works in this direction and not in the other because TLB-flushing
threads tend to hold mmap_lock for write. Contention on that lock
causes threads to _go_ idle right in this early/late window.
There was not any performance data in the original commit specific
to the retpoline overhead. I did a few tests on a system with
retpolines:
https://lore.kernel.org/all/dd8be93c-ded6-b962-50d4-96b1c3afb2b7@intel.com/
which showed a possible small win. But, that small win pales in
comparison with the bigger loss induced on non-retpoline systems.
Revert the patch that removed the retpolines. This was not a
clean revert, but it was self-contained enough not to be too painful.
Fixes: 6035152d8eeb ("x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Nadav Amit <namit@vmware.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/164874672286.389.7021457716635788197.tip-bot2@tip-bot2
|
|
Fix typo in comment.
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Link: https://lore.kernel.org/r/1647831387-3686-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220318103729.157574-10-Julia.Lawall@inria.fr
[will: Squashed in 20220318103729.157574-28-Julia.Lawall@inria.fr]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Arm64 systems rely on store_cpu_topology() to call update_siblings_masks()
to transfer the toplogy to the various cpu masks. This needs to be done
before the call to notify_cpu_starting() which tells the scheduler about
each cpu found, otherwise the core scheduling data structures are setup
in a way that does not match the actual topology.
With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1`
for !leaders in:
notify_cpu_starting()
cpuhp_invoke_callback_range()
sched_cpu_starting()
sched_core_cpu_starting()
which leads to rq->core not being correctly set for !leader-rq's.
Without this change stress-ng (which enables core scheduling in its prctl
tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning
and then a crash (trimmed for legibility):
[ 1853.805168] ------------[ cut here ]------------
[ 1853.809784] task_rq(b)->core != rq->core
[ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4
...
[ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[ 1854.231256] Call trace:
[ 1854.233689] pick_next_task+0x3dc/0x81c
[ 1854.237512] __schedule+0x10c/0x4cc
[ 1854.240988] schedule_idle+0x34/0x54
Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock")
Signed-off-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220331153926.25742-1-pauld@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With 64K page configurations, the tags array stored on the stack of the
mte_dump_tag_range() function is 2048 bytes, triggering a compiler
warning when CONFIG_FRAME_WARN is enabled. Switch to a kmalloc()
allocation via mte_allocate_tag_storage().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220401151356.1674232-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit 3a4f7ef4bed5bdc77a1ac8132f9f0650bbcb3eae.
Revert this temporary bodge. It only existed to ease integration with
the maple tree work for the 5.18 merge window and that doesn't appear
to have landed in any case.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
|
|
Pull ARM fixes from Russell King:
- avoid unnecessary rebuilds for library objects
- fix return value of __setup handlers
- fix invalid input check for "crashkernel=" kernel option
- silence KASAN warnings in unwind_frame
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
ARM: 9187/1: JIVE: fix return value of __setup handler
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
|
|
We recently introduced a usage of kvmhv_on_pseries() in powerpc.c, which
causes a build error for ppc64_book3e_allmodconfig:
arch/powerpc/kvm/powerpc.c:716:8: error: implicit declaration of function ‘kvmhv_on_pseries’
716 | if (kvmhv_on_pseries()) {
| ^~~~~~~~~~~~~~~~
Fix it by moving kvmhv_on_pseries() into kvm_ppc.h so that the stub
version is available for book3e builds.
Fixes: f771b55731fc ("KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
|
|
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
|
|
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.
However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.
Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support. For consistency, do the same for VMX.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove some unused #defines from svm.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Another piece of SVM spec which should be in the header file
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Due to wrong rebase, commit
4a204f7895878 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
