aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-02-09mxc: Core support for Freescale i.MX5 seriesAmit Kucheria
Add basic clock support, cpu identification, I/O mapping, interrupt controller, serial port and ethernet. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09mxc: changes to common plat-mxc code to add support for i.MX5Amit Kucheria
Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc code. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09mxc: refactor timer code to use timer versionsSascha Hauer
Refactor the timer code into version 1 and version 2. Essentially there are 2 versions of the timer hardware on Freescale MXC hardware. Version 1 is found on MX1/MXL, MX21 and MX27. Version 2 is found on MX25, MX31, MX35, MX37, MX51, and future parts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 familyAmit Kucheria
Freescale i.MX51 processor uses a new interrupt controller. Add driver for TrustZone Interrupt Controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-04i.MX27 pca100: Add USB supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04i.MX31 pcm037: Add USB supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04i.MX27 pcm038: Add USB supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04i.MX27 pca100: Add USB supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04i.MX35: Add USB control register access supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de>
2010-02-04i.MX27: Add USB control register access supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de>
2010-02-04i.MX ehci platform support: Some fixesSascha Hauer
- The SIC mask is only 2bits wide, not 4 - MX31_OTG_PM_BIT and MX31_H1_PM_BIT use negative logic - clear MX31_H1_DT_BIT and MX31_H2_DT_BIT so that they can be cleared, not only set. - return -EINVAL if called with an invalid controller number Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de>
2010-02-04Merge branch 'imx/master' of git://git.pengutronix.de/git/ukl/linux-2.6 into ↵Sascha Hauer
mxc-master
2010-02-04MX1/MX2: -EINVAL overwritten in second iteration in ↵Roel Kluin
mxc_gpio_setup_multiple_pins() Due to the `ret = gpio_request()' below in the loop, the initial -EINVAL value of ret is overwritten. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-02imx/mx25: rename files defining a machine to mach-$mach.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02imx: define per SOC ..._PHYS_OFFSET and use these in favour of PHYS_OFFSETUwe Kleine-König
This is a further step in allowing to build a kernel image for more than one imx SOC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02imx2x: convert serial.c to use soc-prefixed constantsUwe Kleine-König
This makes the file compilable for a kernel that supports both imx21 and imx27. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02mxc91231: redefine MXC91231_IO_ADDRESS using IMX_IO_ADDRESSUwe Kleine-König
This simplifies the macro and makes is similar to the other ..._IO_ADDRESS macros defined for imx SOCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_AIPS1_IO_ADDRESSUwe Kleine-König
Apart from MXC91231_IO_ADDRESS itself this was the only usage of MXC91231_AIPS1_IO_ADDRESS. Now MXC91231_IO_ADDRESS can be recoded with IMX_IO_ADDRESS and all helper macros can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Ivo Clarysse <ivo.clarysse@gmail.com>
2010-02-02imx: WARN in clk_disable if the clock isn't enabledUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-30mx25: deprecate UART1_BASE_ADDR and UART2_BASE_ADDRUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-30mx1: prefix SOC specific defines with MX1_ and deprecate old namesUwe Kleine-König
The old names are defined only if the cpp symbol IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all files below arch/arm/mach-mx1. This was done earlier for mx2 and mx3, too. USBD_INT0 is for now defined unconditionally to prevent breaking drivers/usb/gadget/imx_udc. While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which adds a cast to the IO_ADDRESS macro fixing many warnings like arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast . Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-29mx25pdk: platform code for the DryIce RTC moduleBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29mx25: add support for the DryIce rtcBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29Merge branch 'mxc-rc' into mxc-masterSascha Hauer
2010-01-29mx35: add a missing comma in a pad definitionUwe Kleine-König
Reported-by: Tim Sander <tstone@vlsi.informatik.tu-darmstadt.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26ARM: IMX31: configure pins iomux for SDHC setup on litekit board.Vladimir Zapolskiy
This patch adds SDHC support, and corrects current pins setup. Added irq handling on card removal. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx2/mx3: debug-macro.S needs deprecated symbolsUwe Kleine-König
This fixes: arch/arm/kernel/debug.S:147: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)' arch/arm/kernel/debug.S:163: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)' when compiling for mx2 with CONFIG_DEBUG_LL=y. A similar error exists on mx3 and is fixed by this commit, too. These were introduced by aae7019382896cf1075a93acc564e42601bc44a2. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: make the FEC AHB clk secondary of the IPGBaruch Siach
This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: fix time accountingBaruch Siach
The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: properly initialize clocksBaruch Siach
This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: remove unused mx25_clocks_init() argumentBaruch Siach
The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: implement secondary clocks for uarts and fecSascha Hauer
For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: Allow secondary clocks in DEFINE_CLOCKSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-21ARM: MX3: Fixed typo in declared enum type name.Vladimir Zapolskiy
To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14mx25pdk: add NAND device supportBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14mx25: add NAND supportBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14Merge branch 'imx' of git://git.pengutronix.de/git/ukl/linux-2.6 into mxc-masterSascha Hauer
2010-01-12MXC: Add AUDMUXv2 register decode to debugfsMark Brown
Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-08imx: define functions to configure chip selects in the WEIMUwe Kleine-König
This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A are not used anymore in mach-pcm038.c and mach-qong.c. These still use the deprecated IO_ADDRESS macro and shouldn't be used in new code. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx: properly protect mach/mx{1,[25][157x]}.h from multiple inclusionUwe Kleine-König
Some headers have used (now) wrong names or havn't had protection at all. This is needed before adding static inline functions to the headers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Daniel Mack <daniel@caiaq.de>
2010-01-08imx: remove unneeded include of mach/hardware.hUwe Kleine-König
This include isn't needed and hurts when defining static inline functions in mach/hardware.h (or files included by mach/hardware.h). The reason is that the consumers of mach/uncompress.h are compiled using -Dstatic= so the code for all inline function is included in e.g. arch/arm/boot/compressed/misc.o. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jörg Knobloch <knobloch@incostartec.com> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx: remove mx1ads defconfigUwe Kleine-König
For some time now the defconfig for mx1ads produces a kernel for a versatile board. As CONFIG_ARCH_MX1ADS is included in the mx1 defconfig just get rid of mx1ads_defconfig. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de>
2010-01-08imx: only define deprecated symbols conditionallyUwe Kleine-König
Define deprecated symbols in an #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS ... All files that still depend on the old definitions get -DIMX_NEEDS_DEPRECATED_SYMBOLS passed to the compiler. When all remaining users are fixed this allows including the soc specific headers unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08imx: mangle addresses after adding the offsetUwe Kleine-König
don't use IO_ADDRESS($base) + $offset but IO_ADDRESS($base + $offset) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Rabin Vincent <rabin@rab.in> Cc: "Agustín Ferrín Pozuelo" <gatoguan-os@yahoo.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08mx3/kzm_arm11_01: define and use board specific IO_ADDRESS macroUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-08imx35: define and use MX35_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jürgen Beisert <j.beisert@pengutronix.de> Cc: Rabin Vincent <rabin@rab.in> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
2010-01-08imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-08imx31: define and use MX31_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08imx27: define and use MX27_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rabin Vincent <rabin@rab.in> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
2010-01-08imx21: define and use MX21_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Rabin Vincent <rabin@rab.in> Cc: Agustín Ferrín Pozuelo <gatoguan-os@yahoo.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 12:27:40 +0000