Age | Commit message (Collapse) | Author |
|
Mark a couple of structures and functions as 'static', pointed out by Sparse:
warning: symbol 'bts_pmu' was not declared. Should it be static?
warning: symbol 'p4_event_aliases' was not declared. Should it be static?
warning: symbol 'rapl_attr_groups' was not declared. Should it be static?
symbol 'process_uv2_message' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrew Banman <abanman@hpe.com> # for the UV change
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170810155709.7094-1-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
VMSAVE/VMLOAD" CPUID flag
"virtual_vmload_vmsave" is what is going to land in /proc/cpuinfo now
as per v4.13-rc4, for a single feature bit which is clearly too long.
So rename it to what it is called in the processor manual.
"v_vmsave_vmload" is a bit shorter, after all.
We could go more aggressively here but having it the same as in the
processor manual is advantageous.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm-ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170801185552.GA3743@nazgul.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A hang on CPU0 onlining after a preceding offlining is observed. Trace
shows that CPU0 is stuck in check_tsc_sync_target() waiting for source
CPU to run check_tsc_sync_source() but this never happens. Source CPU,
in its turn, is stuck on synchronize_sched() which is called from
native_cpu_up() -> do_boot_cpu() -> unregister_nmi_handler().
So it's a classic ABBA deadlock, due to the use of synchronize_sched() in
unregister_nmi_handler().
Fix the bug by moving unregister_nmi_handler() from do_boot_cpu() to
native_cpu_up() after cpu onlining is done.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170803105818.9934-1-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This closes a hole in our SMAP implementation.
This patch comes from grsecurity. Good catch!
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/314cc9f294e8f14ed85485727556ad4f15bb1659.1502159503.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
"The pull requests are getting smaller, that's progress I suppose :-)
1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi.
2) Fix remote checksum handling in VXLAN and GUE tunneling drivers,
from Koichiro Den.
3) Missing u64_stats_init() calls in several drivers, from Florian
Fainelli.
4) TCP can set the congestion window to an invalid ssthresh value
after congestion window reductions, from Yuchung Cheng.
5) Fix BPF jit branch generation on s390, from Daniel Borkmann.
6) Correct MIPS ebpf JIT merge, from David Daney.
7) Correct byte order test in BPF test_verifier.c, from Daniel
Borkmann.
8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins.
9) Handle SCTP checksums properly in mlx4 driver, from Davide
Caratti.
10) We can potentially enter tcp_connect() with a cached route
already, due to fastopen, so we have to explicitly invalidate it.
11) skb_warn_bad_offload() can bark in legitimate situations, fix from
Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
net: avoid skb_warn_bad_offload false positives on UFO
qmi_wwan: fix NULL deref on disconnect
ppp: fix xmit recursion detection on ppp channels
rds: Reintroduce statistics counting
tcp: fastopen: tcp_connect() must refresh the route
net: sched: set xt_tgchk_param par.net properly in ipt_init_target
net: dsa: mediatek: add adjust link support for user ports
net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets
qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'
hysdn: fix to a race condition in put_log_buffer
s390/qeth: fix L3 next-hop in xmit qeth hdr
asix: Fix small memory leak in ax88772_unbind()
asix: Ensure asix_rx_fixup_info members are all reset
asix: Add rx->ax_skb = NULL after usbnet_skb_return()
bpf: fix selftest/bpf/test_pkt_md_access on s390x
netvsc: fix race on sub channel creation
bpf: fix byte order test in test_verifier
xgene: Always get clk source, but ignore if it's missing for SGMII ports
MIPS: Add missing file for eBPF JIT.
bpf, s390: fix build for libbpf and selftest suite
...
|
|
Pull Xtensa fixes from Max Filippov:
- use asm-generic instances of asm/param.h and asm/device.h instead of
exact copies in arch/xtensa/include/asm;
- fix build error for xtensa cores with aliasing WT cache: define cache
flushing functions and copy_{to,from}_user_page;
- add missing EXPORT_SYMBOLs for clear_user_highpage, copy_user_highpage,
flush_dcache_page, local_flush_cache_range, local_flush_cache_page,
csum_partial and csum_partial_copy_generic.
* tag 'xtensa-20170807' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: mm/cache: add missing EXPORT_SYMBOLs
xtensa: don't limit csum_partial export by CONFIG_NET
xtensa: fix cache aliasing handling code for WT cache
xtensa: remove wrapper header for asm/param.h
xtensa: remove wrapper header for asm/device.h
|
|
Pull MIPS fixes from Ralf Baechle:
"This fixes two build issues for ralink platforms, both due to missing
#includes which used to be included indirectly via other headers"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: mt7620: Add missing header
MIPS: ralink: Fix build error due to missing header
|
|
Pull KVM fixes from Radim Krčmář:
"ARM:
- Yet another race with VM destruction plugged
- A set of small vgic fixes
x86:
- Preserve pending INIT
- RCU fixes in paravirtual async pf, VM teardown, and VMXOFF
emulation
- nVMX interrupt injection and dirty tracking fixes
- initialize to make UBSAN happy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Use READ_ONCE fo cmpxchg
KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"
KVM: nVMX: mark vmcs12 pages dirty on L2 exit
kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardown
KVM: nVMX: do not pin the VMCS12
KVM: avoid using rcu_dereference_protected
KVM: X86: init irq->level in kvm_pv_kick_cpu_op
KVM: X86: Fix loss of pending INIT due to race
KVM: async_pf: make rcu irq exit if not triggered from idle task
KVM: nVMX: fixes to nested virt interrupt injection
KVM: nVMX: do not fill vm_exit_intr_error_code in prepare_vmcs12
KVM: arm/arm64: Handle hva aging while destroying the vm
KVM: arm/arm64: PMU: Fix overflow interrupt injection
KVM: arm/arm64: Fix bug in advertising KVM_CAP_MSI_DEVID capability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"The recent irq core changes unearthed API abuse in the HPET code,
which manifested itself in a suspend/resume regression.
The fix replaces the cruft with the proper function calls and cures
the regression"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Cure interface abuse in the resume path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This comes a bit later than I planned, and as a consequence is a
larger than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic
Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple
randconfig build fixes. This includes making the CONFIG_MTD_XIP option
compile again, which had been broken for many years and probably has
not been missed, but it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards to
work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: dts: tango4: Request RGMII RX and TX clock delays
bus: uniphier-system-bus: set up registers when resuming
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
arm64: defconfig: enable missing HWSPINLOCK
ARM: pxa: select both FB and FB_W100 for eseries
ARM: ixp4xx: fix ioport_unmap definition
ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly
ARM: mmp: mark usb_dma_mask as __maybe_unused
ARM: omap2: mark unused functions as __maybe_unused
ARM: omap1: avoid unused variable warning
ARM: sirf: mark sirfsoc_init_late as __maybe_unused
ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}
ARM: omap1/ams-delta: warn about failed regulator enable
ARM: rpc: rename RAM_SIZE macro
ARM: w90x900: normalize clk API
ARM: ep93xx: normalize clk API
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here are some more arm64 fixes for 4.13. The main one is the PTE race
with the hardware walker, but there are a couple of other things too.
- Report correct timer frequency to userspace when trapping
CNTFRQ_EL0
- Fix race with hardware page table updates when updating access
flags
- Silence clang overflow warning in VA_START and PAGE_OFFSET
calculations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: avoid overflow in VA_START and PAGE_OFFSET
arm64: Fix potential race with hardware DBM in ptep_set_access_flags()
arm64: Use arch_timer_get_rate when trapping CNTFRQ_EL0
|
|
Inexplicably, commit f381bf6d82f0 ("MIPS: Add support for eBPF JIT.")
lost a file somewhere on its path to Linus' tree. Add back the
missing ebpf_jit.c so that we can build with CONFIG_BPF_JIT selected.
This version of ebpf_jit.c is identical to the original except for two
minor change need to resolve conflicts with changes merged from the
BPF branch:
A) Set prog->jited_len = image_size;
B) Use BPF_TAIL_CALL instead of BPF_CALL | BPF_X
Fixes: f381bf6d82f0 ("MIPS: Add support for eBPF JIT.")
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While testing some other work that required JIT modifications, I
run into test_bpf causing a hang when JIT enabled on s390. The
problematic test case was the one from ddc665a4bb4b (bpf, arm64:
fix jit branch offset related to ldimm64), and turns out that we
do have a similar issue on s390 as well. In bpf_jit_prog() we
update next instruction address after returning from bpf_jit_insn()
with an insn_count. bpf_jit_insn() returns either -1 in case of
error (e.g. unsupported insn), 1 or 2. The latter is only the
case for ldimm64 due to spanning 2 insns, however, next address
is only set to i + 1 not taking actual insn_count into account,
thus fix is to use insn_count instead of 1. bpf_jit_enable in
mode 2 provides also disasm on s390:
Before fix:
000003ff800349b6: a7f40003 brc 15,3ff800349bc ; target
000003ff800349ba: 0000 unknown
000003ff800349bc: e3b0f0700024 stg %r11,112(%r15)
000003ff800349c2: e3e0f0880024 stg %r14,136(%r15)
000003ff800349c8: 0db0 basr %r11,%r0
000003ff800349ca: c0ef00000000 llilf %r14,0
000003ff800349d0: e320b0360004 lg %r2,54(%r11)
000003ff800349d6: e330b03e0004 lg %r3,62(%r11)
000003ff800349dc: ec23ffeda065 clgrj %r2,%r3,10,3ff800349b6 ; jmp
000003ff800349e2: e3e0b0460004 lg %r14,70(%r11)
000003ff800349e8: e3e0b04e0004 lg %r14,78(%r11)
000003ff800349ee: b904002e lgr %r2,%r14
000003ff800349f2: e3b0f0700004 lg %r11,112(%r15)
000003ff800349f8: e3e0f0880004 lg %r14,136(%r15)
000003ff800349fe: 07fe bcr 15,%r14
After fix:
000003ff80ef3db4: a7f40003 brc 15,3ff80ef3dba
000003ff80ef3db8: 0000 unknown
000003ff80ef3dba: e3b0f0700024 stg %r11,112(%r15)
000003ff80ef3dc0: e3e0f0880024 stg %r14,136(%r15)
000003ff80ef3dc6: 0db0 basr %r11,%r0
000003ff80ef3dc8: c0ef00000000 llilf %r14,0
000003ff80ef3dce: e320b0360004 lg %r2,54(%r11)
000003ff80ef3dd4: e330b03e0004 lg %r3,62(%r11)
000003ff80ef3dda: ec230006a065 clgrj %r2,%r3,10,3ff80ef3de6 ; jmp
000003ff80ef3de0: e3e0b0460004 lg %r14,70(%r11)
000003ff80ef3de6: e3e0b04e0004 lg %r14,78(%r11) ; target
000003ff80ef3dec: b904002e lgr %r2,%r14
000003ff80ef3df0: e3b0f0700004 lg %r11,112(%r15)
000003ff80ef3df6: e3e0f0880004 lg %r14,136(%r15)
000003ff80ef3dfc: 07fe bcr 15,%r14
test_bpf.ko suite runs fine after the fix.
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull sparc fixes from David Miller:
- block interrupts properly across the entire MMU context change (both
the hw MMU context change and the TSB table change) so that we don't
get a perf event interrupt in the middle. From Rob Gardner.
- be sure to register hugepages early enough, from Nitin Gupta.
- UltraSPARC-III user copy exception handling would return garbage for
the copied length in some circumstances.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix exception handling in UltraSPARC-III memcpy.
sbus: Convert to using %pOF instead of full_name
sparc: defconfig: Cleanup from old Kconfig options
sparc64: Register hugepages during arch init
sparc64: Prevent perf from running during super critical sections
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for recently merged code:
- a fix for the _PAGE_DEVMAP support, which was breaking KVM on
Power9 radix
- avoid a (harmless) lockdep warning in the early SMP code
- return failure for some uses of dma_set_mask() rather than falling
back to 32-bits
- fix stack setup in watchdog soft_nmi_common() to use emergency
stack
- fix of_irq_to_resource() error check in of_fsl_spi_probe()
Two fixes going to stable:
- fix saving of Transactional Memory SPRs in core dump
- fix __check_irq_replay missing decrementer interrupt
And two misc:
- fix 64-bit boot wrapper build with non-biarch compiler
- work around a POWER9 PMU hang after state-loss idle
Thanks to: Alistair Popple, Aneesh Kumar K.V, Cyril Bur, Gustavo
Romero, Jose Ricardo Ziviani, Laurent Vivier, Nicholas Piggin, Oliver
O'Halloran, Sergei Shtylyov, Suraj Jitindar Singh, Thomas Gleixner"
* tag 'powerpc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix __check_irq_replay missing decrementer interrupt
powerpc/perf: POWER9 PMU stops after idle workaround
powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error check
powerpc/64s: Fix stack setup in watchdog soft_nmi_common()
powerpc/powernv/pci: Return failure for some uses of dma_set_mask()
powerpc/boot: Fix 64-bit boot wrapper build with non-biarch compiler
powerpc/smp: Call smp_ops->setup_cpu() directly on the boot CPU
powerpc/tm: Fix saving of TM SPRs in core dump
powerpc/mm: Fix pmd/pte_devmap() on non-leaf entries
|
|
Mikael Pettersson reported that some test programs in the strace-4.18
testsuite cause an OOPS.
After some debugging it turns out that garbage values are returned
when an exception occurs, causing the fixup memset() to be run with
bogus arguments.
The problem is that two of the exception handler stubs write the
successfully copied length into the wrong register.
Fixes: ee841d0aff64 ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.")
Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Tested-by: Mikael Pettersson <mikpelinux@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bitmask used to define these values produces overflow, as seen by
this compiler warning:
arch/arm64/kernel/head.S:47:8: warning:
integer overflow in preprocessor expression
#elif (PAGE_OFFSET & 0x1fffff) != 0
^~~~~~~~~~~
arch/arm64/include/asm/memory.h:52:46: note:
expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS -
1))
~~~~~~~~~~~~~~~~~~ ^
It would be preferrable to use GENMASK_ULL() instead, but it's not set
up to be used from assembly (the UL() macro token pastes UL suffixes
when not included in assembly sources).
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Yury Norov <ynorov@caviumnetworks.com>
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In a system with DBM (dirty bit management) capable agents there is a
possible race between a CPU executing ptep_set_access_flags() (maybe
non-DBM capable) and a hardware update of the dirty state (clearing of
PTE_RDONLY). The scenario:
a) the pte is writable (PTE_WRITE set), clean (PTE_RDONLY set) and old
(PTE_AF clear)
b) ptep_set_access_flags() is called as a result of a read access and it
needs to set the pte to writable, clean and young (PTE_AF set)
c) a DBM-capable agent, as a result of a different write access, is
marking the entry as young (setting PTE_AF) and dirty (clearing
PTE_RDONLY)
The current ptep_set_access_flags() implementation would set the
PTE_RDONLY bit in the resulting value overriding the DBM update and
losing the dirty state.
This patch fixes such race by setting PTE_RDONLY to the most permissive
(lowest value) of the current entry and the new one.
Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM")
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Pull "DaVinci fixes for v4.13" from Sekhar Nori:
Drop unused VPIF endpoints from device-tree.
They should be used only when an actual
remote-endpoint is connected.
* tag 'davinci-fixes-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: drop unused VPIF endpoints
ARM: dts: da850-evm: drop unused VPIF endpoints
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.13" from Chen-Yu Tsai:
Two fixes to correct the EMAC blocks memory region size to match the
datasheet. One that converts raw A83T clock indices to macros from the
clk dt-binding header, completing the A83T sunxi-ng clk driver.
* tag 'sunxi-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Pull "Qualcomm ARM64 based defconfig Fixes for v4.13-rc2" from Andy Gross:
* Enable missing HWSPINLOCK
* tag 'qcom-arm64-defconfig-fixes-for-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: defconfig: enable missing HWSPINLOCK
|
|
RX and TX clock delays are required. Request them explicitly.
Fixes: cad008b8a77e6 ("ARM: dts: tango4: Initial device trees")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Third Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
Fix deadlock in regulator quirk for R-Car Gen 2 SoCs
The da9063/da9210 regulator quirk for R-Car Gen2 boards uses a bus
notifier, and unregisters the notifier when it is no longer needed.
However, a notifier must not be unregistered from within the call chain.
This bug went unnoticed, as blocking_notifier_chain_unregister() didn't
take the semaphore during early boot. This is no longer the case as of
upstream commit 1c3c5eab171590f8 ("sched/core: Enable might_sleep() and
smp_processor_id() checks early") and a deadlock occurs.
* tag 'renesas-fixes3-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
|
|
Pull "mvebu fixes for 4.13 (part 2)" from Gregory CLEMENT:
All the fixes are for ARM64 mvebu:
- Fix the RTC interrupt on A7K/A8K which was missed when switching
from GIC to ICU
- Mark the A7K/A8K crypto engine as dma coherent
- Fix the number of GPIO on south bridge on Armada 3700
* tag 'mvebu-fixes-4.13-2' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
arm64: dts: marvell: mark the cp110 crypto engine as dma coherent
arm64: dts: marvell: use ICU for the CP110 slave RTC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes
Pull "Amlogic fixes for v4.13-rc" from Kevin Hilman:
- 2 minor DT fixes
* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition
ARM64: dts: meson-gx: use specific compatible for the AO pwms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts32 fixes for 4.13" from Heiko Stübner:
Fix for the recently added mali dt support. The example
showed a wrong value, so fix it before it gets copy-pasted
to much.
* tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix mali gpu node on rk3288
dt-bindings: gpu: drop wrong compatible from midgard binding example
|
|
If the decrementer wraps again and de-asserts the decrementer
exception while hard-disabled, __check_irq_replay() has a test to
notice the wrap when interrupts are re-enabled.
The decrementer check must be done when clearing the PACA_IRQ_HARD_DIS
flag, not when the PACA_IRQ_DEC flag is tested. Previously this worked
because the decrementer interrupt was always the first one checked
after clearing the hard disable flag, but HMI check was moved ahead of
that, which introduced this bug.
This can cause a missed decrementer interrupt if we soft-disable
interrupts then take an HMI which is recorded in irq_happened, then
hard-disable interrupts for > 4s to wrap the decrementer.
Fixes: e0e0d6b7390b ("powerpc/64: Replay hypervisor maintenance interrupt first")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
POWER9 DD2 PMU can stop after a state-loss idle in some conditions.
A solution is to set then clear MMCRA[60] after wake from state-loss
idle. MMCRA[60] is a non-architected bit, see the user manual for
details.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one introduced recently and one related
to recent changes, fix cpufreq documentation, fix up recently added
code in the Thunderbolt driver and update runtime PM framework
documentation.
Specifics:
- Fix the handling of the scaling_cur_freq cpufreq policy attribute
on x86 systems with the MPERF/APERF registers present to make it
behave more as expected after recent changes (Rafael Wysocki).
- Drop a leftover callback from the intel_pstate driver which also
prevents the cpuinfo_cur_freq cpufreq policy attribute from being
incorrectly exposed when intel_pstate works in the active mode
(Rafael Wysocki).
- Add a missing piece describing the cpuinfo_cur_freq policy
attribute to cpufreq documentation (Rafael Wysocki).
- Fix up a recently added part of the Thunderbolt driver to avoid
aborting system suspends if its mailbox commands time out (Rafael
Wysocki).
- Update device runtime PM framework documentation to reflect the
current behavior of the code (Johan Hovold)"
* tag 'pm-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thunderbolt: icm: Ignore mailbox errors in icm_suspend()
cpufreq: x86: Make scaling_cur_freq behave more as expected
PM / runtime: Document new pm_runtime_set_suspended() constraint
cpufreq: docs: Add missing cpuinfo_cur_freq description
cpufreq: intel_pstate: Drop ->get from intel_pstate structure
|
|
* pm-cpufreq-x86:
cpufreq: x86: Make scaling_cur_freq behave more as expected
* pm-cpufreq-docs:
cpufreq: docs: Add missing cpuinfo_cur_freq description
* intel_pstate:
cpufreq: intel_pstate: Drop ->get from intel_pstate structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.13-rc4
- Yet another race with VM destruction plugged
- A set of small vgic fixes
|
|
------------[ cut here ]------------
WARNING: CPU: 5 PID: 2288 at arch/x86/kvm/vmx.c:11124 nested_vmx_vmexit+0xd64/0xd70 [kvm_intel]
CPU: 5 PID: 2288 Comm: qemu-system-x86 Not tainted 4.13.0-rc2+ #7
RIP: 0010:nested_vmx_vmexit+0xd64/0xd70 [kvm_intel]
Call Trace:
vmx_check_nested_events+0x131/0x1f0 [kvm_intel]
? vmx_check_nested_events+0x131/0x1f0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x5dd/0x1be0 [kvm]
? vmx_vcpu_load+0x1be/0x220 [kvm_intel]
? kvm_arch_vcpu_load+0x62/0x230 [kvm]
kvm_vcpu_ioctl+0x340/0x700 [kvm]
? kvm_vcpu_ioctl+0x340/0x700 [kvm]
? __fget+0xfc/0x210
do_vfs_ioctl+0xa4/0x6a0
? __fget+0x11d/0x210
SyS_ioctl+0x79/0x90
do_syscall_64+0x8f/0x750
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL64_slow_path+0x25/0x25
This can be reproduced by booting L1 guest w/ 'noapic' grub parameter, which
means that tells the kernel to not make use of any IOAPICs that may be present
in the system.
Actually external_intr variable in nested_vmx_vmexit() is the req_int_win
variable passed from vcpu_enter_guest() which means that the L0's userspace
requests an irq window. I observed the scenario (!kvm_cpu_has_interrupt(vcpu) &&
L0's userspace reqeusts an irq window) is true, so there is no interrupt which
L1 requires to inject to L2, we should not attempt to emualte "Acknowledge
interrupt on exit" for the irq window requirement in this scenario.
This patch fixes it by not attempt to emulate "Acknowledge interrupt on exit"
if there is no L1 requirement to inject an interrupt to L2.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Added code comment to make it obvious that the behavior is not correct.
We should do a userspace exit with open interrupt window instead of the
nested VM exit. This patch still improves the behavior, so it was
accepted as a (temporary) workaround.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The host physical addresses of L1's Virtual APIC Page and Posted
Interrupt descriptor are loaded into the VMCS02. The CPU may write
to these pages via their host physical address while L2 is running,
bypassing address-translation-based dirty tracking (e.g. EPT write
protection). Mark them dirty on every exit from L2 to prevent them
from getting out of sync with dirty tracking.
Also mark the virtual APIC page and the posted interrupt descriptor
dirty when KVM is virtualizing posted interrupt processing.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
According to the Intel SDM, software cannot rely on the current VMCS to be
coherent after a VMXOFF or shutdown. So this is a valid way to handle VMCS12
flushes.
24.11.1 Software Use of Virtual-Machine Control Structures
...
If a logical processor leaves VMX operation, any VMCSs active on
that logical processor may be corrupted (see below). To prevent
such corruption of a VMCS that may be used either after a return
to VMX operation or on another logical processor, software should
execute VMCLEAR for that VMCS before executing the VMXOFF instruction
or removing power from the processor (e.g., as part of a transition
to the S3 and S4 power states).
...
This fixes a "suspicious rcu_dereference_check() usage!" warning during
kvm_vm_release() because nested_release_vmcs12() calls
kvm_vcpu_write_guest_page() without holding kvm->srcu.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Since the current implementation of VMCS12 does a memcpy in and out
of guest memory, we do not need current_vmcs12 and current_vmcs12_page
anymore. current_vmptr is enough to read and write the VMCS12.
And David Matlack noted:
This patch also fixes dirty tracking (memslot->dirty_bitmap) of the
VMCS12 page by using kvm_write_guest. nested_release_page() only marks
the struct page dirty.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[Added David Matlack's note and nested_release_page_clean() fix.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
'lapic_irq' is a local variable and its 'level' field isn't
initialized, so 'level' is random, it doesn't matter but
makes UBSAN unhappy:
UBSAN: Undefined behaviour in .../lapic.c:...
load of value 10 is not a valid value for type '_Bool'
...
Call Trace:
[<ffffffff81f030b6>] dump_stack+0x1e/0x20
[<ffffffff81f03173>] ubsan_epilogue+0x12/0x55
[<ffffffff81f03b96>] __ubsan_handle_load_invalid_value+0x118/0x162
[<ffffffffa1575173>] kvm_apic_set_irq+0xc3/0xf0 [kvm]
[<ffffffffa1575b20>] kvm_irq_delivery_to_apic_fast+0x450/0x910 [kvm]
[<ffffffffa15858ea>] kvm_irq_delivery_to_apic+0xfa/0x7a0 [kvm]
[<ffffffffa1517f4e>] kvm_emulate_hypercall+0x62e/0x760 [kvm]
[<ffffffffa113141a>] handle_vmcall+0x1a/0x30 [kvm_intel]
[<ffffffffa114e592>] vmx_handle_exit+0x7a2/0x1fa0 [kvm_intel]
...
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
When SMP VM start, AP may lost INIT because of receiving INIT between
kvm_vcpu_ioctl_x86_get/set_vcpu_events.
vcpu 0 vcpu 1
kvm_vcpu_ioctl_x86_get_vcpu_events
events->smi.latched_init = 0
send INIT to vcpu1
set vcpu1's pending_events
kvm_vcpu_ioctl_x86_set_vcpu_events
if (events->smi.latched_init == 0)
clear INIT in pending_events
This patch fixes it by just update SMM related flags if we are in SMM.
Thanks Peng Hao for the report and original commit message.
Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The number of pins in South Bridge is 30 and not 29. There is a fix for
the driver for the pinctrl, but a fix is also need at device tree level
for the GPIO.
Fixes: afda007feda5 ("ARM64: dts: marvell: Add pinctrl nodes for Armada
3700")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
of_irq_to_resource() has recently been fixed to return negative error #'s
along with 0 in case of failure, however the Freescale MPC832x RDB board
code still only regards 0 as a failure indication -- fix it up.
Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
WARNING: CPU: 5 PID: 1242 at kernel/rcu/tree_plugin.h:323 rcu_note_context_switch+0x207/0x6b0
CPU: 5 PID: 1242 Comm: unity-settings- Not tainted 4.13.0-rc2+ #1
RIP: 0010:rcu_note_context_switch+0x207/0x6b0
Call Trace:
__schedule+0xda/0xba0
? kvm_async_pf_task_wait+0x1b2/0x270
schedule+0x40/0x90
kvm_async_pf_task_wait+0x1cc/0x270
? prepare_to_swait+0x22/0x70
do_async_page_fault+0x77/0xb0
? do_async_page_fault+0x77/0xb0
async_page_fault+0x28/0x30
RIP: 0010:__d_lookup_rcu+0x90/0x1e0
I encounter this when trying to stress the async page fault in L1 guest w/
L2 guests running.
Commit 9b132fbe5419 (Add rcu user eqs exception hooks for async page
fault) adds rcu_irq_enter/exit() to kvm_async_pf_task_wait() to exit cpu
idle eqs when needed, to protect the code that needs use rcu. However,
we need to call the pair even if the function calls schedule(), as seen
from the above backtrace.
This patch fixes it by informing the RCU subsystem exit/enter the irq
towards/away from idle for both n.halted and !n.halted.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
There are three issues in nested_vmx_check_exception:
1) it is not taking PFEC_MATCH/PFEC_MASK into account, as reported
by Wanpeng Li;
2) it should rebuild the interruption info and exit qualification fields
from scratch, as reported by Jim Mattson, because the values from the
L2->L0 vmexit may be invalid (e.g. if an emulated instruction causes
a page fault, the EPT misconfig's exit qualification is incorrect).
3) CR2 and DR6 should not be written for exception intercept vmexits
(CR2 only for AMD).
This patch fixes the first two and adds a comment about the last,
outlining the fix.
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do this in the caller of nested_vmx_vmexit instead.
nested_vmx_check_exception was doing a vmwrite to the vmcs02's
VM_EXIT_INTR_ERROR_CODE field, so that prepare_vmcs12 would move
the field to vmcs12->vm_exit_intr_error_code. However that isn't
possible on pre-Haswell machines. Moving the vmcs12 write to the
callers fixes it.
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Changed nested_vmx_reflect_vmexit() return type to (int)1 from (bool)1,
thanks to fengguang.wu@intel.com]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Functions clear_user_highpage, copy_user_highpage, flush_dcache_page,
local_flush_cache_range and local_flush_cache_page may be used from
modules. Export them.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
csum_partial and csum_partial_copy_generic are defined unconditionally
and are available even when CONFIG_NET is disabled. They are used not
only by the network drivers, but also by scsi and media.
Don't limit these functions export by CONFIG_NET.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
In an ideal world, CNTFRQ_EL0 always contains the timer frequency
for the kernel to use. Sadly, we get quite a few broken systems
where the firmware authors cannot be bothered to program that
register on all CPUs, and rely on DT to provide that frequency.
So when trapping CNTFRQ_EL0, make sure to return the actual rate
(as known by the kernel), and not CNTFRQ_EL0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The HPET resume path abuses irq_domain_[de]activate_irq() to restore the
MSI message in the HPET chip for the boot CPU on resume and it relies on an
implementation detail of the interrupt core code, which magically makes the
HPET unmask call invoked via a irq_disable/enable pair. This worked as long
as the irq code did unconditionally invoke the unmask() callback. With the
recent changes which keep track of the masked state to avoid expensive
hardware access, this does not longer work. As a consequence the HPET timer
interrupts are not unmasked which breaks resume as the boot CPU waits
forever that a timer interrupt arrives.
Make the restore of the MSI message explicit and invoke the unmask()
function directly. While at it get rid of the pointless affinity setting as
nothing can change the affinity of the interrupt and the vector across
suspend/resume. The restore of the MSI message reestablishes the previous
affinity setting which is the correct one.
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-and-tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reported-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: jeffy.chen@rock-chips.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707312158590.2287@nanos
|
|
While working on enabling queued rwlock on SPARC, found this following
code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN
to clear a byte.
static inline u8 *__qrwlock_write_byte(struct qrwlock *lock)
{
return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN);
}
Problem is many of the fixed big endian architectures don't define
CPU_BIG_ENDIAN and clears the wrong byte.
Define CPU_BIG_ENDIAN for parisc architecture to fix it.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The watchdog soft-NMI exception stack setup loads a stack pointer
twice, which is an obvious error. It ends up using the system reset
interrupt (true-NMI) stack, which is also a bug because the watchdog
could be preempted by a system reset interrupt that overwrites the
NMI stack.
Change the soft-NMI to use the "emergency stack". The current kernel
stack is not used, because of the longer-term goal to prevent
asynchronous stack access using soft-disable.
Fixes: 2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The fixes branch is based off a random pre-rc1 commit, because we had
some fixes that needed to go in before rc1 was released.
However we now need to fix some code that went in after that point, but
before rc1, so merge rc1 to get that code into fixes so we can fix it!
|
|
Since kernel 4.11 the thread and irq stacks on parisc randomly overflow
the default size of 16k. The reason why stack usage suddenly grew is yet
unknown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Helge Deller <deller@gmx.de>
|