aboutsummaryrefslogtreecommitdiff
path: root/block/blk-merge.c
AgeCommit message (Collapse)Author
2020-01-14block: fix get_max_segment_size() overflow on 32bit archMing Lei
Commit 429120f3df2d starts to take account of segment's start dma address when computing max segment size, and data type of 'unsigned long' is used to do that. However, the segment mask may be 0xffffffff, so the figured out segment size may be overflowed in case of zero physical address on 32bit arch. Fix the issue by returning queue_max_segment_size() directly when that happens. Fixes: 429120f3df2d ("block: fix splitting segments on boundary masks") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Christoph Hellwig <hch@lst.de> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-30block: fix splitting segments on boundary masksMing Lei
We ran into a problem with a mpt3sas based controller, where we would see random (and hard to reproduce) file corruption). The issue seemed specific to this controller, but wasn't specific to the file system. After a lot of debugging, we find out that it's caused by segments spanning a 4G memory boundary. This shouldn't happen, as the default setting for segment boundary masks is 4G. Turns out there are two issues in get_max_segment_size(): 1) The default segment boundary mask is bypassed 2) The segment start address isn't taken into account when checking segment boundary limit Fix these two issues by removing the bypass of the segment boundary check even if the mask is set to the default value, and taking into account the actual start address of the request when checking if a segment needs splitting. Cc: stable@vger.kernel.org # v5.1+ Reviewed-by: Chris Mason <clm@fb.com> Tested-by: Chris Mason <clm@fb.com> Fixes: dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count") Signed-off-by: Ming Lei <ming.lei@redhat.com> Dropped const on the page pointer, ppc page_to_phys() doesn't mark the page as const... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21Revert "block: split bio if the only bvec's length is > SZ_4K"Jens Axboe
We really don't need this, as the slow path will do the right thing anyway. This reverts commit 6952a7f8446ee85ea9d10ab87b64797a031eaae3. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08block: split bio if the only bvec's length is > SZ_4KMing Lei
64K PAGE_SIZE is popular on ARM64 or other ARCHs, and 64K has been big enough to break some devices probably, so change the logic to split bio if the only bvec's length is > SZ_4K instead of PAGE_SIZE. Fixes: fa5322872187 (block: avoid blk_bio_segment_split for small I/O operations) Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08block: still try to split bio if the bvec crosses pagesMing Lei
Some device may set segment boundary as PAGE_SIZE - 1. If the bvec crosses pages, and meantime its length is <= PAGE_SIZE, we still need to split the bvec into 2 segments. Fixes this issue by still splitting bio if the single bvec crosses pages. Reported-by: kernel test robot <lkp@intel.com> Fixes: fa5322872187 (block: avoid blk_bio_segment_split for small I/O operations) Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: avoid blk_bio_segment_split for small I/O operationsChristoph Hellwig
__blk_queue_split() adds significant overhead for small I/O operations. Add a shortcut to avoid it for cases where we know we never need to split. Based on a patch from Ming Lei. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Improve physical block alignment of split biosBart Van Assche
Consider the following example: * The logical block size is 4 KB. * The physical block size is 8 KB. * max_sectors equals (16 KB >> 9) sectors. * A non-aligned 4 KB and an aligned 64 KB bio are merged into a single non-aligned 68 KB bio. The current behavior is to split such a bio into (16 KB + 16 KB + 16 KB + 16 KB + 4 KB). The start of none of these five bio's is aligned to a physical block boundary. This patch ensures that such a bio is split into four aligned and one non-aligned bio instead of being split into five non-aligned bios. This improves performance because most block devices can handle aligned requests faster than non-aligned requests. Since the physical block size is larger than or equal to the logical block size, this patch preserves the guarantee that the returned value is a multiple of the logical block size. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Simplify blk_bio_segment_split()Bart Van Assche
Move the max_sectors check into bvec_split_segs() such that a single call to that function can do all the necessary checks. This patch optimizes the fast path further, namely if a bvec fits in a page. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Simplify bvec_split_segs()Bart Van Assche
Simplify this function by by removing two if-tests. Other than requiring that the @sectors pointer is not NULL, this patch does not change the behavior of bvec_split_segs(). Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Document the bio splitting functionsBart Van Assche
Since what the bio splitting functions do is nontrivial, document these functions. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Declare several function pointer arguments 'const'Bart Van Assche
Make it clear to the compiler and also to humans that the functions that query request queue properties do not modify any member of the request_queue data structure. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-03block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROESChristoph Hellwig
Fix a regression introduced when removing bi_phys_segments for Write Zeroes requests, which need to have a segment count of zero, as they don't have a payload. Fixes: 14ccb66b3f58 ("block: remove the bi_phys_segments field in struct bio") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: untangle the end of blk_bio_segment_splitChristoph Hellwig
Now that we don't need to assign the front/back segment sizes, we can duplicating the segs assignment for the split vs no-split case and remove a whole chunk of boilerplate code. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: simplify blk_recalc_rq_segmentsChristoph Hellwig
Return the segement and let the callers assign them, which makes the code a littler more obvious. Also pass the request instead of q plus bio chain, allowing for the use of rq_for_each_bvec. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: remove the bi_phys_segments field in struct bioChristoph Hellwig
We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23block: remove the bi_seg_{front,back}_size fields in struct bioChristoph Hellwig
At this point these fields aren't used for anything, so we can remove them. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23block: remove the segment size check in bio_will_gapChristoph Hellwig
We fundamentally do not have a maximum segement size for devices with a virt boundary. So don't bother checking it, especially given that the existing checks didn't properly work to start with as we never fully update the front/back segment size and miss the bi_seg_front_size that wuld have been required for some cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23block: don't decrement nr_phys_segments for physically contigous segmentsChristoph Hellwig
Currently ll_merge_requests_fn, unlike all other merge functions, reduces nr_phys_segments by one if the last segment of the previous, and the first segment of the next segement are contigous. While this seems like a nice solution to avoid building smaller than possible requests it causes a mismatch between the segments actually present in the request and those iterated over by the bvec iterators, including __rq_for_each_bio. This can for example mistrigger the single segment optimization in the nvme-pci driver, and might lead to mismatching nr_phys_segments number when recalculating the number of request when inserting a cloned request. We could possibly work around this by making the bvec iterators take the front and back segment size into account, but that would require moving them from the bio to the bio_iter and spreading this mess over all users of bvecs. Or we could simply remove this optimization under the assumption that most users already build good enough bvecs, and that the bio merge patch never cared about this optimization either. The latter is what this patch does. dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests"). Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22block: avoid scatterlist offsets > PAGE_SIZEChristoph Hellwig
While we generally allow scatterlists to have offsets larger than page size for an entry, and other subsystems like the crypto code make use of that, the block layer isn't quite ready for that. Flip the switch back to avoid them for now, and revisit that decision early in a merge window once the known offenders are fixed. Fixes: 8a96a0e40810 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call") Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12block: rewrite blk_bvec_map_sg to avoid a nth_page callChristoph Hellwig
The offset in scatterlists is allowed to be larger than the page size, so don't go to great length to avoid that case and simplify the arithmetics. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08block: fix build warning in merging bvecsMing Lei
Commit f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable") changes bvec merge by only considering two bvecs from different bios. However, if the former bio doesn't inlcude any io bvec, then the following warning may be triggered: warning: ‘bvec.bv_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized] In practice, it shouldn't be triggered. Fixes it by adding check on former bio, the check shouldn't add any cost given 'bio->bi_iter' can be hit in cache. Reported-by: Jens Axboe <axboe@kernel.dk> Fixes: f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: don't check if adjacent bvecs in one bio can be mergeableMing Lei
Now both passthrough and FS IO have supported multi-page bvec, and bvec merging has been handled actually when adding page to bio, then adjacent bvecs won't be mergeable any more if they belong to same bio. So only try to merge bvecs if they are from different bios. Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: reuse __blk_bvec_map_sg() for mapping page sized bvecMing Lei
Inside __blk_segment_map_sg(), page sized bvec mapping is optimized a bit with one standalone branch. So reuse __blk_bvec_map_sg() to do that. Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: remove argument of 'request_queue' from __blk_bvec_map_sgMing Lei
The argument of 'request_queue' isn't used by __blk_bvec_map_sg(), so remove it. Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: don't merge adjacent bvecs to one segment in bio blk_queue_splitMing Lei
For normal filesystem IO, each page is added via blk_add_page(), in which bvec(page) merge has been handled already, and basically not possible to merge two adjacent bvecs in one bio. So not try to merge two adjacent bvecs in blk_queue_split(). Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-06block: fix segment calculation for passthrough IOMing Lei
blk_recount_segments() can be called in bio_add_pc_page() for calculating how many segments this bio will has after one page is added to this bio. If the resulted segment number is beyond the queue limit, the added page will be removed. The try-and-fix policy requires blk_recount_segments(__blk_recalc_rq_segments) to not consider the segment number limit. Unfortunately bvec_split_segs() does check this limit, and causes small segment number returned to bio_add_pc_page(), then page still may be added to the bio even though segment number limit becomes broken. Fixes this issue by not considering segment number limit when calcualting bio's segment number. Fixes: dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count") Cc: Christoph Hellwig <hch@lst.de> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-02block: fix updating bio's front segment sizeMing Lei
When the current bvec can be merged to the 1st segment, the bio's front segment size has to be updated. However, dcebd755926b doesn't consider that case, then bio's front segment size may not be correct. This patch fixes this issue. Cc: Christoph Hellwig <hch@lst.de> Cc: Omar Sandoval <osandov@fb.com> Fixes: dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27block: optimize blk_bio_segment_split for single-page bvecMing Lei
Introduce a fast path for single-page bvec IO, then we can avoid to call bvec_split_segs() unnecessarily. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27block: optimize __blk_segment_map_sg() for single-page bvecMing Lei
Introduce a fast path for single-page bvec IO, then blk_bvec_map_sg() can be avoided. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27block: introduce bvec_nth_page()Ming Lei
Single-page bvec can often be seen in small BS workloads, so introduce bvec_nth_page() for avoiding to call nth_page() unnecessarily, which looks not cheap. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-19block: avoid to READ fields of null bioMing Lei
rq->bio can be NULL sometimes, such as flush request, so don't read bio->bi_seg_front_size until this 'bio' is checked as valid. Cc: Bart Van Assche <bvanassche@acm.org> Reported-by: Bart Van Assche <bvanassche@acm.org> Fixes: dcebd755926b0f39dd1e ("block: use bio_for_each_bvec() to compute multi-page bvec count") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: kill QUEUE_FLAG_NO_SG_MERGEMing Lei
Since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting"), physical segment number is mainly figured out in blk_queue_split() for fast path, and the flag of BIO_SEG_VALID is set there too. Now only blk_recount_segments() and blk_recalc_rq_segments() use this flag. Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID is set in blk_queue_split(). For another user of blk_recalc_rq_segments(): - run in partial completion branch of blk_update_request, which is an unusual case - run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed since dm-rq is the only user. Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the current setup of the I/O path, as it isn't going to save you a significant amount of cycles. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: use bio_for_each_bvec() to map sgMing Lei
It is more efficient to use bio_for_each_bvec() to map sg, meantime we have to consider splitting multipage bvec as done in blk_bio_segment_split(). Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: use bio_for_each_bvec() to compute multi-page bvec countMing Lei
First it is more efficient to use bio_for_each_bvec() in both blk_bio_segment_split() and __blk_recalc_rq_segments() to compute how many multi-page bvecs there are in the bio. Secondly once bio_for_each_bvec() is used, the bvec may need to be splitted because its length can be very longer than max segment size, so we have to split the big bvec into several segments. Thirdly when splitting multi-page bvec into segments, the max segment limit may be reached, so the bio split need to be considered under this situation too. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: don't use bio->bi_vcnt to figure out segment numberMing Lei
It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced. So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting"). Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-27Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"Jens Axboe
We can't touch a bio after ->make_request_fn(), for all we know it could already have been completed by the time this function returns. This reverts commit 698cef173983b086977e633e46476e0f925ca01e. Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22block: cover another queue enter recursion via BIO_QUEUE_ENTEREDMing Lei
Except for blk_queue_split(), bio_split() is used for splitting bio too, then the remained bio is often resubmit to queue via generic_make_request(). So the same queue enter recursion exits in this case too. Unfortunatley commit cd4a4ae4683dc2 doesn't help this case. This patch covers the above case by setting BIO_QUEUE_ENTERED before calling q->make_request_fn. In theory the per-bio flag is used to simulate one stack variable, it is just fine to clear it after q->make_request_fn is returned. Especially the same bio can't be submitted from another context. Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits") Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: NeilBrown <neilb@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-18scsi: block: remove the cluster flagChristoph Hellwig
Now that the the SCSI layer replaced the use of the cluster flag with segment size limits and the DMA boundary we can remove the cluster flag from the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-14block: remove the blk_recount_segments exportChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: delete part_round_stats and switch to less precise countingMikulas Patocka
We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: stop passing 'cpu' to all percpu stats methodsMike Snitzer
All of part_stat_* and related methods are used with preempt disabled, so there is no need to pass cpu around to allow of them. Just call smp_processor_id() as needed. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-11-30block: fix single range discard mergeMing Lei
There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0f4d329a ("blk-mq: fix discard merge with scheduler attached") Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Guangwu Zhang <guazhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: prevent merging of requests with different prioritiesDamien Le Moal
Growing in size a high priority request by merging it with a lower priority BIO or request will increase the request execution time. This is the opposite result of the desired effect of high I/O priorities, namely getting low I/O latencies. Prevent merging of requests and BIOs that have different I/O priorities to fix this. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-18Merge tag 'v4.20-rc3' into for-4.21/blockJens Axboe
Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14block: make blk_try_req_merge() staticEric Biggers
blk_try_req_merge() is only used in block/blk-merge.c, so make it static. This addresses a gcc warning when -Wmissing-prototypes is enabled. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: make sure discard bio is aligned with logical block sizeMing Lei
Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7cbb56a6 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: kill request ->cpu memberJens Axboe
This was used for completion placement for the legacy path, but for mq we have rq->mq_ctx->cpu for that. Add a helper to get the request CPU assignment, as the mq_ctx type is private to blk-mq. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-merge: kill dead queue lock held checkJens Axboe
This is dead code, any queue reaching this part has mq_ops attached. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>