aboutsummaryrefslogtreecommitdiff
path: root/block/elevator.c
AgeCommit message (Collapse)Author
2018-01-18block: Document scheduler modification locking requirementsBart Van Assche
This patch does not change any functionality. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-18block: Unexport elv_register_queue() and elv_unregister_queue()Bart Van Assche
These two functions are only called from inside the block layer so unexport them. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06blk-mq: quiesce queue during switching io sched and updating nr_requestsMing Lei
Dispatch may still be in-progress after queue is frozen, so we have to quiesce queue before switching IO scheduler and updating nr_requests. Also when switching io schedulers, blk_mq_run_hw_queue() may still be called somewhere(such as from nvme_reset_work()), and io scheduler's per-hctx data may not be setup yet, so cause oops even inside blk_mq_hctx_has_pending(), such as it can be run just between: ret = e->ops.mq.init_sched(q, e); AND ret = e->ops.mq.init_hctx(hctx, i) inside blk_mq_init_sched(). This reverts commit 7a148c2fcff8330(block: don't call blk_mq_quiesce_queue() after queue is frozen) basically, and makes sure blk_mq_hctx_has_pending won't be called if queue is quiesced. Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 7a148c2fcff83309(block: don't call blk_mq_quiesce_queue() after queue is frozen) Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25elevator: allow name aliasesJens Axboe
Since we now lookup elevator types with the appropriate multiqueue capability, allow schedulers to register with an alias alongside the real name. This is in preparation for allowing 'mq-deadline' to register an alias of 'deadline' as well. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25elevator: lookup mq vs non-mq elevatorsJens Axboe
If an IO scheduler is selected via elevator= and it doesn't match the driver in question wrt blk-mq support, then we fail to boot. The elevator= parameter is deprecated and only supported for non-mq devices. Augment the elevator lookup API so that we pass in if we're looking for an mq capable scheduler or not, so that we only ever return a valid type for the queue in question. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695 Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-05block: remove QUEUE_FLAG_STACKABLEChristoph Hellwig
We already have a queue_is_rq_based helper to check if a request_queue is request based, so we can remove the flag for it. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28block: fix warning when I/O elevator is changed as request_queue is being ↵David Jeffery
removed There is a race between changing I/O elevator and request_queue removal which can trigger the warning in kobject_add_internal. A program can use sysfs to request a change of elevator at the same time another task is unregistering the request_queue the elevator would be attached to. The elevator's kobject will then attempt to be connected to the request_queue in the object tree when the request_queue has just been removed from sysfs. This triggers the warning in kobject_add_internal as the request_queue no longer has a sysfs directory: kobject_add_internal failed for iosched (error: -2 parent: queue) ------------[ cut here ]------------ WARNING: CPU: 3 PID: 14075 at lib/kobject.c:244 kobject_add_internal+0x103/0x2d0 To fix this warning, we can check the QUEUE_FLAG_REGISTERED flag when changing the elevator and use the request_queue's sysfs_lock to serialize between clearing the flag and the elevator testing the flag. Signed-off-by: David Jeffery <djeffery@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-21block: Add fallthrough markers to switch statementsBart Van Assche
This patch suppresses gcc 7 warnings about falling through in switch statements when building with W=1. From the gcc documentation: The -Wimplicit-fallthrough=3 warning is enabled by -Wextra. See also https://gcc.gnu.org/onlinedocs/gcc-7.1.0/gcc/Warning-Options.html. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-05-10elevator: remove redundant warnings on IO scheduler switchJens Axboe
We warn twice for switching to a scheduler, if that switch fails. As we also report the failure in the return value to the sysfs write, remove the dmesg induced failures. Keep the failure print for warning to switch to the kconfig selected IO scheduler, as we can't report errors for that in any other way. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02block: don't call blk_mq_quiesce_queue() after queue is frozenMing Lei
After queue is frozen, no request in this queue can be in use at all, so there can't be any .queue_rq() running on this queue. It isn't necessary to call blk_mq_quiesce_queue() any more, so remove it in both elevator_switch_mq() and blk_mq_update_nr_requests(). Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Fixed up the description a bit. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02block: Remove elevator_change()Bart Van Assche
Since commit 84253394927c ("remove the mg_disk driver") removed the only caller of elevator_change(), also remove the elevator_change() function itself. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-01Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ was initially a fork of CFQ, but subsequently changed to implement fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant to be used on desktop type single drives, providing good fairness. From Paolo. - Add Kyber IO scheduler. This is a full multiqueue aware scheduler, using a scalable token based algorithm that throttles IO based on live completion IO stats, similary to blk-wbt. From Omar. - A series from Jan, moving users to separately allocated backing devices. This continues the work of separating backing device life times, solving various problems with hot removal. - A series of updates for lightnvm, mostly from Javier. Includes a 'pblk' target that exposes an open channel SSD as a physical block device. - A series of fixes and improvements for nbd from Josef. - A series from Omar, removing queue sharing between devices on mostly legacy drivers. This helps us clean up other bits, if we know that a queue only has a single device backing. This has been overdue for more than a decade. - Fixes for the blk-stats, and improvements to unify the stats and user windows. This both improves blk-wbt, and enables other users to register a need to receive IO stats for a device. From Omar. - blk-throttle improvements from Shaohua. This provides a scalable framework for implementing scalable priotization - particularly for blk-mq, but applicable to any type of block device. The interface is marked experimental for now. - Bucketized IO stats for IO polling from Stephen Bates. This improves efficiency of polled workloads in the presence of mixed block size IO. - A few fixes for opal, from Scott. - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics. From a variety of folks, mostly Sagi and James Smart. - A series from Bart, improving our exposed info and capabilities from the blk-mq debugfs support. - A series from Christoph, cleaning up how handle WRITE_ZEROES. - A series from Christoph, cleaning up the block layer handling of how we track errors in a request. On top of being a nice cleanup, it also shrinks the size of struct request a bit. - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was never used by platforms, and the latter has outlived it's usefulness. - Various little bug fixes and cleanups from a wide variety of folks. * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits) block: hide badblocks attribute by default blk-mq: unify hctx delay_work and run_work block: add kblock_mod_delayed_work_on() blk-mq: unify hctx delayed_run_work and run_work nbd: fix use after free on module unload MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler blk-mq-sched: alloate reserved tags out of normal pool mtip32xx: use runtime tag to initialize command header scsi: Implement blk_mq_ops.show_rq() blk-mq: Add blk_mq_ops.show_rq() blk-mq: Show operation, cmd_flags and rq_flags names blk-mq: Make blk_flags_show() callers append a newline character blk-mq: Move the "state" debugfs attribute one level down blk-mq: Unregister debugfs attributes earlier blk-mq: Only unregister hctxs for which registration succeeded blk-mq-debugfs: Rename functions for registering and unregistering the mq directory blk-mq: Let blk_mq_debugfs_register() look up the queue name blk-mq: Register <dev>/queue/mq after having registered <dev>/queue ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset ide-pm: always pass 0 error to __blk_end_request_all ..
2017-04-19block: respect BLK_MQ_F_NO_SCHEDMing Lei
If one driver claims that it doesn't support io scheduler via BLK_MQ_F_NO_SCHED, we should not allow to change and show the availabe io schedulers. This patch adds check to enhance this behaviour. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19block: Make writeback throttling defaults consistent for SQ devicesJan Kara
When CFQ is used as an elevator, it disables writeback throttling because they don't play well together. Later when a different elevator is chosen for the device, writeback throttling doesn't get enabled again as it should. Make sure CFQ enables writeback throttling (if it should be enabled by default) when we switch from it to another IO scheduler. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq-sched: fix crash in switch error pathOmar Sandoval
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall back to the original scheduler. However, at this point, we've already torn down the original scheduler's tags, so this causes a crash. Doing the fallback like the legacy elevator path is much harder for mq, so fix it by just falling back to none, instead. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07blk-mq-sched: refactor scheduler initializationOmar Sandoval
Preparation cleanup for the next couple of fixes, push blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02block: don't call ioc_exit_icq() with the queue lock held for blk-mqJens Axboe
For legacy scheduling, we always call ioc_exit_icq() with both the ioc and queue lock held. This poses a problem for blk-mq with scheduling, since the queue lock isn't what we use in the scheduler. And since we don't need the queue lock held for ioc exit there, don't grab it and leave any extra locking up to the blk-mq scheduler. Reported-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22block: get rid of blk-mq default scheduler choice Kconfig entriesJens Axboe
The wording in the entries were poor and not understandable by even deities. Kill the selection for default block scheduler, and impose a policy with sane defaults. Architected-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14elevator: fix loading wrong elevator type for blk-mq devicesJens Axboe
The old elevator= boot parameter blindly attempts to load the same scheduler for mq and !mq devices, leading to a crash if we specify the wrong one. Ensure that we only apply this boot parameter to old !mq devices. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08block: enumify ELEVATOR_*_MERGEChristoph Hellwig
Switch these constants to an enum, and make let the compiler ensure that all callers of blk_try_merge and elv_merge handle all potential values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-01blk-mq-debug: Avoid that sparse complains about req_flags_t usageBart Van Assche
Avoid that sparse reports the following complaints: block/elevator.c:541:29: warning: incorrect type in assignment (different base types) block/elevator.c:541:29: expected bool [unsigned] [usertype] next_sorted block/elevator.c:541:29: got restricted req_flags_t block/blk-mq-debugfs.c:92:54: warning: cast from restricted req_flags_t Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31block: introduce blk_rq_is_passthroughChristoph Hellwig
This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-19elevator: fix unnecessary put of elevator in failure caseJens Axboe
We already checked that e is NULL, so no point in calling elevator_put() to free it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: dc877dbd088f ("blk-mq-sched: add framework for MQ capable IO schedulers") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-17blk-mq-sched: allow setting of default IO schedulerJens Axboe
Add Kconfig entries to manage what devices get assigned an MQ scheduler, and add a blk-mq flag for drivers to opt out of scheduling. The latter is useful for admin type queues that still allocate a blk-mq queue and tag set, but aren't use for normal IO. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17blk-mq-sched: add framework for MQ capable IO schedulersJens Axboe
This adds a set of hooks that intercepts the blk-mq path of allocating/inserting/issuing/completing requests, allowing us to develop a scheduler within that framework. We reuse the existing elevator scheduler API on the registration side, but augment that with the scheduler flagging support for the blk-mq interfce, and with a separate set of ops hooks for MQ devices. We split driver and scheduler tags, so we can run the scheduling independently of device queue depth. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17block: move existing elevator ops to unionJens Axboe
Prep patch for adding MQ ops as well, since doing anon unions with named initializers doesn't work on older compilers. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-12-09elevator: make the rqhash helpers exportedJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-10-28block: better op and flags encodingChristoph Hellwig
Now that we don't need the common flags to overflow outside the range of a 32-bit type we can encode them the same way for both the bio and request fields. This in addition allows us to place the operation first (and make some room for more ops while we're at it) and to stop having to shift around the operation values. In addition this allows passing around only one value in the block layer instead of two (and eventuall also in the file systems, but we can do that later) and thus clean up a lot of code. Last but not least this allows decreasing the size of the cmd_flags field in struct request to 32-bits. Various functions passing this value could also be updated, but I'd like to avoid the churn for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: split out request-only flags into a new namespaceChristoph Hellwig
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16block: Fix secure eraseAdrian Hunter
Commit 288dab8a35a0 ("block: add a separate operation type for secure erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering all the places REQ_OP_DISCARD was being used to mean either. Fix those. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 288dab8a35a0 ("block: add a separate operation type for secure erase") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: do not merge requests without consulting with io schedulerTahsin Erdogan
Before merging a bio into an existing request, io scheduler is called to get its approval first. However, the requests that come from a plug flush may get merged by block layer without consulting with io scheduler. In case of CFQ, this can cause fairness problems. For instance, if a request gets merged into a low weight cgroup's request, high weight cgroup now will depend on low weight cgroup to get scheduled. If high weigt cgroup needs that io request to complete before submitting more requests, then it will also lose its timeslice. Following script demonstrates the problem. Group g1 has a low weight, g2 and g3 have equal high weights but g2's requests are adjacent to g1's requests so they are subject to merging. Due to these merges, g2 gets poor disk time allocation. cat > cfq-merge-repro.sh << "EOF" #!/bin/bash set -e IO_ROOT=/mnt-cgroup/io mkdir -p $IO_ROOT if ! mount | grep -qw $IO_ROOT; then mount -t cgroup none -oblkio $IO_ROOT fi cd $IO_ROOT for i in g1 g2 g3; do if [ -d $i ]; then rmdir $i fi done mkdir g1 && echo 10 > g1/blkio.weight mkdir g2 && echo 495 > g2/blkio.weight mkdir g3 && echo 495 > g3/blkio.weight RUNTIME=10 (echo $BASHPID > g1/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=0k &> /dev/null)& (echo $BASHPID > g2/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=64k &> /dev/null)& (echo $BASHPID > g3/cgroup.procs && fio --readonly --name name1 --filename /dev/sdb \ --rw read --size 64k --bs 64k --time_based \ --runtime=$RUNTIME --offset=256k &> /dev/null)& sleep $((RUNTIME+1)) for i in g1 g2 g3; do echo ---- $i ---- cat $i/blkio.time done EOF # ./cfq-merge-repro.sh ---- g1 ---- 8:16 162 ---- g2 ---- 8:16 165 ---- g3 ---- 8:16 686 After applying the patch: # ./cfq-merge-repro.sh ---- g1 ---- 8:16 90 ---- g2 ---- 8:16 445 ---- g3 ---- 8:16 471 Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: prepare elevator to use REQ_OPs.Mike Christie
This patch converts the elevator code to use separate variables for the operation and flags, and to check req_op for the REQ_OP. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21block: check bio_mergeable() early before mergingMing Lei
After bio splitting is introduced, one bio can be splitted and it is marked as NOMERGE because it is too fat to be merged, so check bio_mergeable() earlier to avoid to try to merge it unnecessarily. Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-25Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
2015-06-25Merge branch 'for-4.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block IO update from Jens Axboe: "Nothing really major in here, mostly a collection of smaller optimizations and cleanups, mixed with various fixes. In more detail, this contains: - Addition of policy specific data to blkcg for block cgroups. From Arianna Avanzini. - Various cleanups around command types from Christoph. - Cleanup of the suspend block I/O path from Christoph. - Plugging updates from Shaohua and Jeff Moyer, for blk-mq. - Eliminating atomic inc/dec of both remaining IO count and reference count in a bio. From me. - Fixes for SG gap and chunk size support for data-less (discards) IO, so we can merge these better. From me. - Small restructuring of blk-mq shared tag support, freeing drivers from iterating hardware queues. From Keith Busch. - A few cfq-iosched tweaks, from Tahsin Erdogan and me. Makes the IOPS mode the default for non-rotational storage" * 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits) cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL cfq-iosched: fix sysfs oops when attempting to read unconfigured weights cfq-iosched: move group scheduling functions under ifdef cfq-iosched: fix the setting of IOPS mode on SSDs blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file block, cgroup: implement policy-specific per-blkcg data block: Make CFQ default to IOPS mode on SSDs block: add blk_set_queue_dying() to blkdev.h blk-mq: Shared tag enhancements block: don't honor chunk sizes for data-less IO block: only honor SG gap prevention for merges that contain data block: fix returnvar.cocci warnings block, dm: don't copy bios for request clones block: remove management of bi_remaining when restoring original bi_end_io block: replace trylock with mutex_lock in blkdev_reread_part() block: export blkdev_reread_part() and __blkdev_reread_part() suspend: simplify block I/O handling block: collapse bio bit space block: remove unused BIO_RW_BLOCK and BIO_EOF flags block: remove BIO_EOPNOTSUPP ...
2015-06-10cfq-iosched: fix the setting of IOPS mode on SSDsJens Axboe
A previous commit wanted to make CFQ default to IOPS mode on non-rotational storage, however it did so when the queue was initialized and the non-rotational flag is only set later on in the probe. Add an elevator hook that gets called off the add_disk() path, at that point we know that feature probing has finished, and we can reliably check for the various flags that drivers can set. Fixes: 41c0126b ("block: Make CFQ default to IOPS mode on SSDs") Tested-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02blkcg: move block/blk-cgroup.h to include/linux/blk-cgroup.hTejun Heo
cgroup aware writeback support will require exposing some of blkcg details. In preprataion, move block/blk-cgroup.h to include/linux/blk-cgroup.h. This patch is pure file move. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-23elevator: fix double release of elevator moduleChao Yu
Our issue is descripted in below call path: ->elevator_init ->elevator_init_fn ->{cfq,deadline,noop}_init_queue ->elevator_alloc ->kzalloc_node fail to call kzalloc_node and then put module in elevator_alloc; fail to call elevator_init_fn and then put module again in elevator_init. Remove elevator_put invoking in error path of elevator_alloc to avoid double release issue. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-04block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the block device core. Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23block: fix wrong error return in elevator_init()Sudip Mukherjee
while compiling integer err was showing as a set but unused variable. elevator_init_fn can be either cfq_init_queue or deadline_init_queue or noop_init_queue. all three of these functions are returning -ENOMEM if they fail to allocate the queue. so we should actually be returning the error code rather than returning 0 always. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-22Revert "block: add __init to elv_register"Jens Axboe
This reverts commit b5097e956a4d2919ee248d6481e4204c5568ed5c. The original commit is buggy, we do use the registration functions at runtime, for instance when loading IO schedulers through sysfs. Reported-by: Damien Wyart <damien.wyart@gmail.com>
2014-06-11block: remove elv_abort_queue and blk_abort_flushesChristoph Hellwig
elv_abort_queue has no callers, and blk_abort_flushes is only called by elv_abort_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-10block: add __init to elv_registerFabian Frederick
elv_register is only called by elevator init functions: __init cfq_init __init deadline_init __init noop_init Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09block: fix regression with block enabled taggingJens Axboe
Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2013-11-23block: Abstract out bvec iteratorKent Overstreet
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-11-08elevator: acquire q->sysfs_lock in elevator_change()Tomoki Sekiyama
Add locking of q->sysfs_lock into elevator_change() (an exported function) to ensure it is held to protect q->elevator from elevator_init(), even if elevator_change() is called from non-sysfs paths. sysfs path (elv_iosched_store) uses __elevator_change(), non-locking version, as the lock is already taken by elv_iosched_store(). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08elevator: Fix a race in elevator switching and md device initializationTomoki Sekiyama
The soft lockup below happens at the boot time of the system using dm multipath and the udev rules to switch scheduler. [ 356.127001] BUG: soft lockup - CPU#3 stuck for 22s! [sh:483] [ 356.127001] RIP: 0010:[<ffffffff81072a7d>] [<ffffffff81072a7d>] lock_timer_base.isra.35+0x1d/0x50 ... [ 356.127001] Call Trace: [ 356.127001] [<ffffffff81073810>] try_to_del_timer_sync+0x20/0x70 [ 356.127001] [<ffffffff8118b08a>] ? kmem_cache_alloc_node_trace+0x20a/0x230 [ 356.127001] [<ffffffff810738b2>] del_timer_sync+0x52/0x60 [ 356.127001] [<ffffffff812ece22>] cfq_exit_queue+0x32/0xf0 [ 356.127001] [<ffffffff812c98df>] elevator_exit+0x2f/0x50 [ 356.127001] [<ffffffff812c9f21>] elevator_change+0xf1/0x1c0 [ 356.127001] [<ffffffff812caa50>] elv_iosched_store+0x20/0x50 [ 356.127001] [<ffffffff812d1d09>] queue_attr_store+0x59/0xb0 [ 356.127001] [<ffffffff812143f6>] sysfs_write_file+0xc6/0x140 [ 356.127001] [<ffffffff811a326d>] vfs_write+0xbd/0x1e0 [ 356.127001] [<ffffffff811a3ca9>] SyS_write+0x49/0xa0 [ 356.127001] [<ffffffff8164e899>] system_call_fastpath+0x16/0x1b This is caused by a race between md device initialization by multipathd and shell script to switch the scheduler using sysfs. - multipathd: SyS_ioctl -> do_vfs_ioctl -> dm_ctl_ioctl -> ctl_ioctl -> table_load -> dm_setup_md_queue -> blk_init_allocated_queue -> elevator_init q->elevator = elevator_alloc(q, e); // not yet initialized - sh -c 'echo deadline > /sys/$DEVPATH/queue/scheduler': elevator_switch (in the call trace above) struct elevator_queue *old = q->elevator; q->elevator = elevator_alloc(q, new_e); elevator_exit(old); // lockup! (*) - multipathd: (cont.) err = e->ops.elevator_init_fn(q); // init fails; q->elevator is modified (*) When del_timer_sync() is called, lock_timer_base() will loop infinitely while timer->base == NULL. In this case, as timer will never initialized, it results in lockup. This patch introduces acquisition of q->sysfs_lock around elevator_init() into blk_init_allocated_queue(), to provide mutual exclusion between initialization of the q->scheduler and switching of the scheduler. This should fix this bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=902012 Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-11block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)Joe Perches
Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-07-03elevator: Fix a race in elevator switchingJianpeng Ma
There's a race between elevator switching and normal io operation. Because the allocation of struct elevator_queue and struct elevator_data don't in a atomic operation.So there are have chance to use NULL ->elevator_data. For example: Thread A: Thread B blk_queu_bio elevator_switch spin_lock_irq(q->queue_block) elevator_alloc elv_merge elevator_init_fn Because call elevator_alloc, it can't hold queue_lock and the ->elevator_data is NULL.So at the same time, threadA call elv_merge and nedd some info of elevator_data.So the crash happened. Move the elevator_alloc into func elevator_init_fn, it make the operations in a atomic operation. Using the follow method can easy reproduce this bug 1:dd if=/dev/sdb of=/dev/null 2:while true;do echo noop > scheduler;echo deadline > scheduler;done The test method also use this method. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 13:13:47 +0000