aboutsummaryrefslogtreecommitdiff
path: root/certs
AgeCommit message (Collapse)Author
2018-02-21certs/blacklist_nohashes.c: fix const confusion in certs blacklistAndi Kleen
const must be marked __initconst, not __initdata. Link: http://lkml.kernel.org/r/20171222001335.1987-1-andi@firstfloor.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-14modsign: add markers to endif-statements in certs/MakefileJarkko Sakkinen
It's a bit hard for eye to track certs/Makefile if you are not accustomed to it. This commit adds comments to key endif statements in order to help to keep the context while reading this file. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-05-08scripts/spelling.txt: add "intialise(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: intialisation||initialisation intialised||initialised intialise||initialise This commit does not intend to change the British spelling itself. Link: http://lkml.kernel.org/r/1481573103-11329-18-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-04KEYS: Use structure to capture key restriction function and dataMat Martineau
Replace struct key's restrict_link function pointer with a pointer to the new struct key_restriction. The structure contains pointers to the restriction function as well as relevant data for evaluating the restriction. The garbage collector checks restrict_link->keytype when key types are unregistered. Restrictions involving a removed key type are converted to use restrict_link_reject so that restrictions cannot be removed by unregistering key types. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Split role of the keyring pointer for keyring restrict functionsMat Martineau
The first argument to the restrict_link_func_t functions was a keyring pointer. These functions are called by the key subsystem with this argument set to the destination keyring, but restrict_link_by_signature expects a pointer to the relevant trusted keyring. Restrict functions may need something other than a single struct key pointer to allow or reject key linkage, so the data used to make that decision (such as the trust keyring) is moved to a new, fourth argument. The first argument is now always the destination keyring. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Add a system blacklist keyringDavid Howells
Add the following: (1) A new system keyring that is used to store information about blacklisted certificates and signatures. (2) A new key type (called 'blacklist') that is used to store a blacklisted hash in its description as a hex string. The key accepts no payload. (3) The ability to configure a list of blacklisted hashes into the kernel at build time. This is done by setting CONFIG_SYSTEM_BLACKLIST_HASH_LIST to the filename of a list of hashes that are in the form: "<hash>", "<hash>", ..., "<hash>" where each <hash> is a hex string representation of the hash and must include all necessary leading zeros to pad the hash to the right size. The above are enabled with CONFIG_SYSTEM_BLACKLIST_KEYRING. Once the kernel is booted, the blacklist keyring can be listed: root@andromeda ~]# keyctl show %:.blacklist Keyring 723359729 ---lswrv 0 0 keyring: .blacklist 676257228 ---lswrv 0 0 \_ blacklist: 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 The blacklist cannot currently be modified by userspace, but it will be possible to load it, for example, from the UEFI blacklist database. A later commit will make it possible to load blacklisted asymmetric keys in here too. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11certs: Add a secondary system keyring that can be added to dynamicallyDavid Howells
Add a secondary system keyring that can be added to by root whilst the system is running - provided the key being added is vouched for by a key built into the kernel or already added to the secondary keyring. Rename .system_keyring to .builtin_trusted_keys to distinguish it more obviously from the new keyring (called .secondary_trusted_keys). The new keyring needs to be enabled with CONFIG_SECONDARY_TRUSTED_KEYRING. If the secondary keyring is enabled, a link is created from that to .builtin_trusted_keys so that the the latter will automatically be searched too if the secondary keyring is searched. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTEDDavid Howells
Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED as they're no longer meaningful. Also we can drop the trusted flag from the preparse structure. Given this, we no longer need to pass the key flags through to restrict_link(). Further, we can now get rid of keyring_restrict_trusted_only() also. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Move the point of trust determination to __key_link()David Howells
Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Make the system trusted keyring depend on the asymmetric key typeDavid Howells
Make the system trusted keyring depend on the asymmetric key type as there's not a lot of point having it if you can't then load asymmetric keys onto it. This requires the ASYMMETRIC_KEY_TYPE to be made a bool, not a tristate, as the Kconfig language doesn't then correctly force ASYMMETRIC_KEY_TYPE to 'y' rather than 'm' if SYSTEM_TRUSTED_KEYRING is 'y'. Making SYSTEM_TRUSTED_KEYRING *select* ASYMMETRIC_KEY_TYPE instead doesn't work as the Kconfig interpreter then wrongly complains about dependency loops. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11KEYS: Add a facility to restrict new links into a keyringDavid Howells
Add a facility whereby proposed new links to be added to a keyring can be vetted, permitting them to be rejected if necessary. This can be used to block public keys from which the signature cannot be verified or for which the signature verification fails. It could also be used to provide blacklisting. This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE. To this end: (1) A function pointer is added to the key struct that, if set, points to the vetting function. This is called as: int (*restrict_link)(struct key *keyring, const struct key_type *key_type, unsigned long key_flags, const union key_payload *key_payload), where 'keyring' will be the keyring being added to, key_type and key_payload will describe the key being added and key_flags[*] can be AND'ed with KEY_FLAG_TRUSTED. [*] This parameter will be removed in a later patch when KEY_FLAG_TRUSTED is removed. The function should return 0 to allow the link to take place or an error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the link. The pointer should not be set directly, but rather should be set through keyring_alloc(). Note that if called during add_key(), preparse is called before this method, but a key isn't actually allocated until after this function is called. (2) KEY_ALLOC_BYPASS_RESTRICTION is added. This can be passed to key_create_or_update() or key_instantiate_and_link() to bypass the restriction check. (3) KEY_FLAG_TRUSTED_ONLY is removed. The entire contents of a keyring with this restriction emplaced can be considered 'trustworthy' by virtue of being in the keyring when that keyring is consulted. (4) key_alloc() and keyring_alloc() take an extra argument that will be used to set restrict_link in the new key. This ensures that the pointer is set before the key is published, thus preventing a window of unrestrictedness. Normally this argument will be NULL. (5) As a temporary affair, keyring_restrict_trusted_only() is added. It should be passed to keyring_alloc() as the extra argument instead of setting KEY_FLAG_TRUSTED_ONLY on a keyring. This will be replaced in a later patch with functions that look in the appropriate places for authoritative keys. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-06PKCS#7: Make trust determination dependent on contents of trust keyringDavid Howells
Make the determination of the trustworthiness of a key dependent on whether a key that can verify it is present in the supplied ring of trusted keys rather than whether or not the verifying key has KEY_FLAG_TRUSTED set. verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust chain cannot be verified. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06KEYS: Generalise system_verify_data() to provide access to internal contentDavid Howells
Generalise system_verify_data() to provide access to internal content through a callback. This allows all the PKCS#7 stuff to be hidden inside this function and removed from the PE file parser and the PKCS#7 test key. If external content is not required, NULL should be passed as data to the function. If the callback is not required, that can be set to NULL. The function is now called verify_pkcs7_signature() to contrast with verify_pefile_signature() and the definitions of both have been moved into linux/verification.h along with the key_being_used_for enum. Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-29certs: Fix misaligned data in extra certificate listDavid Howells
Fix the following warning found by kbuild: certs/system_certificates.S:24: Error: misaligned data because: KEYS: Reserve an extra certificate symbol for inserting without recompiling doesn't correctly align system_extra_cert_used. Signed-off-by: David Howells <dhowells@redhat.com> cc: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com>
2016-02-26KEYS: Reserve an extra certificate symbol for inserting without recompilingMehmet Kayaalp
Place a system_extra_cert buffer of configurable size, right after the system_certificate_list, so that inserted keys can be readily processed by the existing mechanism. Added script takes a key file and a kernel image and inserts its contents to the reserved area. The system_certificate_list_size is also adjusted accordingly. Call the script as: scripts/insert-sys-cert -b <vmlinux> -c <certfile> If vmlinux has no symbol table, supply System.map file with -s flag. Subsequent runs replace the previously inserted key, instead of appending the new one. Signed-off-by: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-26modsign: hide openssl output in silent buildsArnd Bergmann
When a user calls 'make -s', we can assume they don't want to see any output except for warnings and errors, but instead they see this for a warning free build: ### ### Now generating an X.509 key pair to be used for signing modules. ### ### If this takes a long time, you might wish to run rngd in the ### background to keep the supply of entropy topped up. It ### needs to be run as root, and uses a hardware random ### number generator if one is available. ### Generating a 4096 bit RSA private key .................................................................................................................................................................................................................................++ ..............................................................................................................................++ writing new private key to 'certs/signing_key.pem' ----- ### ### Key pair generated. ### The output can confuse simple build testing scripts that just check for an empty build log. This patch silences all the output: - "echo" is changed to "@$(kecho)", which is dropped when "-s" gets passed - the openssl command itself is only printed with V=1, using the $(Q) macro - The output of openssl gets redirected to /dev/null on "-s" builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-09KEYS: Add an alloc flag to convey the builtinness of a keyDavid Howells
Add KEY_ALLOC_BUILT_IN to convey that a key should have KEY_FLAG_BUILTIN set rather than setting it after the fact. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-10-21certs: add .gitignore to stop git nagging about x509_certificate_listPaul Gortmaker
Currently we see this in "git status" if we build in the source dir: Untracked files: (use "git add <file>..." to include in what will be committed) certs/x509_certificate_list It looks like it used to live in kernel/ so we squash that .gitignore entry at the same time. I didn't bother to dig through git history to see when it moved, since it is just a minor annoyance at most. Cc: David Woodhouse <dwmw2@infradead.org> Cc: keyrings@linux-nfs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14modsign: Handle signing key in source treeDavid Woodhouse
Since commit 1329e8cc69 ("modsign: Extract signing cert from CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped with the signing key being specified as a relative path in either the source or or the build trees. However, the actual signing of modules has not worked if the filename is relative to the source tree. Fix that by moving the config_filename helper into scripts/Kbuild.include so that it can be used from elsewhere, and then using it in the top-level Makefile to find the signing key file. Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while we're at it. There's no need for them. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14modsign: Use if_changed rule for extracting cert from module signing keyDavid Woodhouse
We couldn't use if_changed for this before, because it didn't live in the kernel/ directory so we couldn't add it to $(targets). It was easier just to leave it as it was. Now it's in the certs/ directory we can use if_changed, the same as we do for the trusted certificate list. Aside from making things consistent, this means we don't need to depend explicitly on the include/config/module/sig/key.h file. And we also get to automatically do the right thing and re-extract the cert if the user does odd things like using a relative filename and then playing silly buggers with adding/removing that file in both the source and object trees. We always favour the one in the object tree if it exists, and now we'll correctly re-extract the cert when it changes. Previously we'd *only* re-extract the cert if the config option changed, even if the actual file we're using did change. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14Move certificate handling to its own directoryDavid Howells
Move certificate handling out of the kernel/ directory and into a certs/ directory to get all the weird stuff in one place and move the generated signing keys into this directory. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>