aboutsummaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)Author
2021-01-20X.509: Fix crash caused by NULL pointerTianjia Zhang
On the following call path, `sig->pkey_algo` is not assigned in asymmetric_key_verify_signature(), which causes runtime crash in public_key_verify_signature(). keyctl_pkey_verify asymmetric_key_verify_signature verify_signature public_key_verify_signature This patch simply check this situation and fixes the crash caused by NULL pointer. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Reported-by: Tobias Markus <tobias@markus-regensburg.de> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: João Fonseca <jpedrofonseca@ua.pt> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-18Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed()
2021-01-10Merge tag 'char-misc-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ...
2021-01-08crypto: xor - Fix divide error in do_xor_speed()Kirill Tkhai
crypto: Fix divide error in do_xor_speed() From: Kirill Tkhai <ktkhai@virtuozzo.com> Latest (but not only latest) linux-next panics with divide error on my QEMU setup. The patch at the bottom of this message fixes the problem. xor: measuring software checksum speed divide error: 0000 [#1] PREEMPT SMP KASAN PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-next-20201223+ #2177 RIP: 0010:do_xor_speed+0xbb/0xf3 Code: 41 ff cc 75 b5 bf 01 00 00 00 e8 3d 23 8b fe 65 8b 05 f6 49 83 7d 85 c0 75 05 e8 84 70 81 fe b8 00 00 50 c3 31 d2 48 8d 7b 10 <f7> f5 41 89 c4 e8 58 07 a2 fe 44 89 63 10 48 8d 7b 08 e8 cb 07 a2 RSP: 0000:ffff888100137dc8 EFLAGS: 00010246 RAX: 00000000c3500000 RBX: ffffffff823f0160 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000808 RDI: ffffffff823f0170 RBP: 0000000000000000 R08: ffffffff8109c50f R09: ffffffff824bb6f7 R10: fffffbfff04976de R11: 0000000000000001 R12: 0000000000000000 R13: ffff888101997000 R14: ffff888101994000 R15: ffffffff823f0178 FS: 0000000000000000(0000) GS:ffff8881f7780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000220e000 CR4: 00000000000006a0 Call Trace: calibrate_xor_blocks+0x13c/0x1c4 ? do_xor_speed+0xf3/0xf3 do_one_initcall+0xc1/0x1b7 ? start_kernel+0x373/0x373 ? unpoison_range+0x3a/0x60 kernel_init_freeable+0x1dd/0x238 ? rest_init+0xc6/0xc6 kernel_init+0x8/0x10a ret_from_fork+0x1f/0x30 ---[ end trace 5bd3c1d0b77772da ]--- Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking") Cc: <stable@vger.kernel.org> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03crypto: ecdh - avoid buffer overflow in ecdh_set_secret()Ard Biesheuvel
Pavel reports that commit 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") fixes one problem but introduces another: the unconditional memcpy() introduced by that commit may overflow the target buffer if the source data is invalid, which could be the result of intentional tampering. So check params.key_size explicitly against the size of the target buffer before validating the key further. Fixes: 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-31crypto: asym_tpm: correct zero out potential secretsGreg Kroah-Hartman
The function derive_pub_key() should be calling memzero_explicit() instead of memset() in case the complier decides to optimize away the call to memset() because it "knows" no one is going to touch the memory anymore. Cc: stable <stable@vger.kernel.org> Reported-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com> Tested-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/X8ns4AfwjKudpyfe@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04crypto: aegis128 - avoid spurious references crypto_aegis128_update_simdArd Biesheuvel
Geert reports that builds where CONFIG_CRYPTO_AEGIS128_SIMD is not set may still emit references to crypto_aegis128_update_simd(), which cannot be satisfied and therefore break the build. These references only exist in functions that can be optimized away, but apparently, the compiler is not always able to prove this. So add some explicit checks for CONFIG_CRYPTO_AEGIS128_SIMD to help the compiler figure this out. Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-04crypto: seed - remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-04crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()Ard Biesheuvel
ecdh_set_secret() casts a void* pointer to a const u64* in order to feed it into ecc_is_key_valid(). This is not generally permitted by the C standard, and leads to actual misalignment faults on ARMv6 cores. In some cases, these are fixed up in software, but this still leads to performance hits that are entirely avoidable. So let's copy the key into the ctx buffer first, which we will do anyway in the common case, and which guarantees correct alignment. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: tcrypt - include 1420 byte blocks in aead and skcipher benchmarksArd Biesheuvel
WireGuard and IPsec both typically operate on input blocks that are ~1420 bytes in size, given the default Ethernet MTU of 1500 bytes and the overhead of the VPN metadata. Many aead and sckipher implementations are optimized for power-of-2 block sizes, and whether they perform well when operating on 1420 byte blocks cannot be easily extrapolated from the performance on power-of-2 block size. So let's add 1420 bytes explicitly, and round it up to the next blocksize multiple of the algo in question if it does not support 1420 byte blocks. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: tcrypt - permit tcrypt.ko to be builtinArd Biesheuvel
When working on crypto algorithms, being able to run tcrypt quickly without booting an entire Linux installation can be very useful. For instance, QEMU/kvm can be used to boot a kernel from the command line, and having tcrypt.ko builtin would allow tcrypt to be executed to run benchmarks, or to run tests for algorithms that need to be instantiated from templates, without the need to make it past the point where the rootfs is mounted. So let's relax the requirement that tcrypt can only be built as a module when CONFIG_EXPERT is enabled. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: tcrypt - don't initialize at subsys_initcall timeArd Biesheuvel
Commit c4741b2305979 ("crypto: run initcalls for generic implementations earlier") converted tcrypt.ko's module_init() to subsys_initcall(), but this was unintentional: tcrypt.ko currently cannot be built into the core kernel, and so the subsys_initcall() gets converted into module_init() under the hood. Given that tcrypt.ko does not implement a generic version of a crypto algorithm that has to be available early during boot, there is no point in running the tcrypt init code earlier than implied by module_init(). However, for crypto development purposes, we will lift the restriction that tcrypt.ko must be built as a module, and when builtin, it makes sense for tcrypt.ko (which does its work inside the module init function) to run as late as possible. So let's switch to late_initcall() instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: aegis128 - expose SIMD code path as separate driverArd Biesheuvel
Wiring the SIMD code into the generic driver has the unfortunate side effect that the tcrypt testing code cannot distinguish them, and will therefore not use the latter to fuzz test the former, as it does for other algorithms. So let's refactor the code a bit so we can register two implementations: aegis128-generic and aegis128-simd. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: aegis128/neon - move final tag check to SIMD domainArd Biesheuvel
Instead of calculating the tag and returning it to the caller on decryption, use a SIMD compare and min across vector to perform the comparison. This is slightly more efficient, and removes the need on the caller's part to wipe the tag from memory if the decryption failed. While at it, switch to unsigned int when passing cryptlen and assoclen - we don't support input sizes where it matters anyway. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: aegis128/neon - optimize tail block handlingArd Biesheuvel
Avoid copying the tail block via a stack buffer if the total size exceeds a single AEGIS block. In this case, we can use overlapping loads and stores and NEON permutation instructions instead, which leads to a modest performance improvement on some cores (< 5%), and is slightly cleaner. Note that we still need to use a stack buffer if the entire input is smaller than 16 bytes, given that we cannot use 16 byte NEON loads and stores safely in this case. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: aegis128 - wipe plaintext and tag if decryption failsArd Biesheuvel
The AEGIS spec mentions explicitly that the security guarantees hold only if the resulting plaintext and tag of a failed decryption are withheld. So ensure that we abide by this. While at it, drop the unused struct aead_request *req parameter from crypto_aegis128_process_crypt(). Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: Kconfig - CRYPTO_MANAGER_EXTRA_TESTS requires the managerJason A. Donenfeld
The extra tests in the manager actually require the manager to be selected too. Otherwise the linker gives errors like: ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor': chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test' Fixes: 2343d1529aff ("crypto: Kconfig - allow tests to be disabled when manager is disabled") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: af_alg - avoid undefined behavior accessing salg_nameEric Biggers
Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") made the kernel start accepting arbitrarily long algorithm names in sockaddr_alg. However, the actual length of the salg_name field stayed at the original 64 bytes. This is broken because the kernel can access indices >= 64 in salg_name, which is undefined behavior -- even though the memory that is accessed is still located within the sockaddr structure. It would only be defined behavior if the array were properly marked as arbitrary-length (either by making it a flexible array, which is the recommended way these days, or by making it an array of length 0 or 1). We can't simply change salg_name into a flexible array, since that would break source compatibility with userspace programs that embed sockaddr_alg into another struct, or (more commonly) declare a sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'. One solution would be to change salg_name into a flexible array only when '#ifdef __KERNEL__'. However, that would keep userspace without an easy way to actually use the longer algorithm names. Instead, add a new structure 'sockaddr_alg_new' that has the flexible array field, and expose it to both userspace and the kernel. Make the kernel use it correctly in alg_bind(). This addresses the syzbot report "UBSAN: array-index-out-of-bounds in alg_bind" (https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e). Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: testmgr - WARN on test failureEric Biggers
Currently, by default crypto self-test failures only result in a pr_warn() message and an "unknown" status in /proc/crypto. Both of these are easy to miss. There is also an option to panic the kernel when a test fails, but that can't be the default behavior. A crypto self-test failure always indicates a kernel bug, however, and there's already a standard way to report (recoverable) kernel bugs -- the WARN() family of macros. WARNs are noisier and harder to miss, and existing test systems already know to look for them in dmesg or via /proc/sys/kernel/tainted. Therefore, call WARN() when an algorithm fails its self-tests. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: testmgr - always print the actual skcipher driver nameEric Biggers
When alg_test() is called from tcrypt.ko rather than from the algorithm registration code, "driver" is actually the algorithm name, not the driver name. So it shouldn't be used in places where a driver name is wanted, e.g. when reporting a test failure or when checking whether the driver is the generic driver or not. Fix this for the skcipher algorithm tests by getting the driver name from the crypto_skcipher that actually got allocated. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: testmgr - always print the actual AEAD driver nameEric Biggers
When alg_test() is called from tcrypt.ko rather than from the algorithm registration code, "driver" is actually the algorithm name, not the driver name. So it shouldn't be used in places where a driver name is wanted, e.g. when reporting a test failure or when checking whether the driver is the generic driver or not. Fix this for the AEAD algorithm tests by getting the driver name from the crypto_aead that actually got allocated. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: testmgr - always print the actual hash driver nameEric Biggers
When alg_test() is called from tcrypt.ko rather than from the algorithm registration code, "driver" is actually the algorithm name, not the driver name. So it shouldn't be used in places where a driver name is wanted, e.g. when reporting a test failure or when checking whether the driver is the generic driver or not. Fix this for the hash algorithm tests by getting the driver name from the crypto_ahash or crypto_shash that actually got allocated. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-30crypto: sm2 - remove unnecessary reset operationsTianjia Zhang
This is an algorithm optimization. The reset operation when setting the public key is repeated and redundant, so remove it. At the same time, `sm2_ecc_os2ec()` is optimized to make the function more simpler and more in line with the Linux code style. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-13Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Here are the driver updates for 5.10. A few SCSI updates in here too, in coordination with Martin as they depend on core block changes for the shared tag bitmap. This contains: - NVMe pull requests via Christoph: - fix keep alive timer modification (Amit Engel) - order the PCI ID list more sensibly (Andy Shevchenko) - cleanup the open by controller helper (Chaitanya Kulkarni) - use an xarray for the CSE log lookup (Chaitanya Kulkarni) - support ZNS in nvmet passthrough mode (Chaitanya Kulkarni) - fix nvme_ns_report_zones (Christoph Hellwig) - add a sanity check to nvmet-fc (James Smart) - fix interrupt allocation when too many polled queues are specified (Jeffle Xu) - small nvmet-tcp optimization (Mark Wunderlich) - fix a controller refcount leak on init failure (Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni) - major refactoring of the scanning code (Christoph Hellwig) - MD updates via Song: - Bug fixes in bitmap code, from Zhao Heming - Fix a work queue check, from Guoqing Jiang - Fix raid5 oops with reshape, from Song Liu - Clean up unused code, from Jason Yan - Discard improvements, from Xiao Ni - raid5/6 page offset support, from Yufen Yu - Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap, Hannes) - null_blk open/active zone limit support (Niklas) - Set of bcache updates (Coly, Dongsheng, Qinglang)" * tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits) md/raid5: fix oops during stripe resizing md/bitmap: fix memory leak of temporary bitmap md: fix the checking of wrong work queue md/bitmap: md_bitmap_get_counter returns wrong blocks md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks md/raid0: remove unused function is_io_in_chunk_boundary() nvme-core: remove extra condition for vwc nvme-core: remove extra variable nvme: remove nvme_identify_ns_list nvme: refactor nvme_validate_ns nvme: move nvme_validate_ns nvme: query namespace identifiers before adding the namespace nvme: revalidate zone bitmaps in nvme_update_ns_info nvme: remove nvme_update_formats nvme: update the known admin effects nvme: set the queue limits in nvme_update_ns_info nvme: remove the 0 lba_shift check in nvme_update_ns_info nvme: clean up the check for too large logic block sizes nvme: freeze the queue over ->lba_shift updates nvme: factor out a nvme_configure_metadata helper ...
2020-10-13Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Allow DRBG testing through user-space af_alg - Add tcrypt speed testing support for keyed hashes - Add type-safe init/exit hooks for ahash Algorithms: - Mark arc4 as obsolete and pending for future removal - Mark anubis, khazad, sead and tea as obsolete - Improve boot-time xor benchmark - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity Drivers: - Fixes and enhancement for XTS in caam - Add support for XIP8001B hwrng in xiphera-trng - Add RNG and hash support in sun8i-ce/sun8i-ss - Allow imx-rngc to be used by kernel entropy pool - Use crypto engine in omap-sham - Add support for Ingenic X1830 with ingenic" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits) X.509: Fix modular build of public_key_sm2 crypto: xor - Remove unused variable count in do_xor_speed X.509: fix error return value on the failed path crypto: bcm - Verify GCM/CCM key length in setkey crypto: qat - drop input parameter from adf_enable_aer() crypto: qat - fix function parameters descriptions crypto: atmel-tdes - use semicolons rather than commas to separate statements crypto: drivers - use semicolons rather than commas to separate statements hwrng: mxc-rnga - use semicolons rather than commas to separate statements hwrng: iproc-rng200 - use semicolons rather than commas to separate statements hwrng: stm32 - use semicolons rather than commas to separate statements crypto: xor - use ktime for template benchmarking crypto: xor - defer load time benchmark to a later time crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num' crypto: hisilicon/zip - fix the return value when device is busy crypto: hisilicon/zip - fix zero length input in GZIP decompress crypto: hisilicon/zip - fix the uncleared debug registers lib/mpi: Fix unused variable warnings crypto: x86/poly1305 - Remove assignments with no effect hwrng: npcm - modify readl to readb ...
2020-10-08X.509: Fix modular build of public_key_sm2Herbert Xu
The sm2 code was split out of public_key.c in a way that breaks modular builds. This patch moves the code back into the same file as the original motivation was to minimise ifdefs and that has nothing to do with splitting the code out. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3...") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08crypto: xor - Remove unused variable count in do_xor_speedNathan Chancellor
Clang warns: crypto/xor.c:101:4: warning: variable 'count' is uninitialized when used here [-Wuninitialized] count++; ^~~~~ crypto/xor.c:86:17: note: initialize the variable 'count' to silence this warning int i, j, count; ^ = 0 1 warning generated. After the refactoring to use ktime that happened in this function, count is only assigned, never read. Just remove the variable to get rid of the warning. Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking") Link: https://github.com/ClangBuiltLinux/linux/issues/1171 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08X.509: fix error return value on the failed pathTianjia Zhang
When memory allocation fails, an appropriate return value should be set. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: xor - use ktime for template benchmarkingArd Biesheuvel
Currently, we use the jiffies counter as a time source, by staring at it until a HZ period elapses, and then staring at it again and perform as many XOR operations as we can at the same time until another HZ period elapses, so that we can calculate the throughput. This takes longer than necessary, and depends on HZ, which is undesirable, since HZ is system dependent. Let's use the ktime interface instead, and use it to time a fixed number of XOR operations, which can be done much faster, and makes the time spent depend on the performance level of the system itself, which is much more reasonable. To ensure that we have the resolution we need even on systems with 32 kHz time sources, while not spending too much time in the benchmark on a slow CPU, let's switch to 3 attempts of 800 repetitions each: that way, we will only misidentify algorithms that perform within 10% of each other as the fastest if they are faster than 10 GB/s to begin with, which is not expected to occur on systems with such coarse clocks. On ThunderX2, I get the following results: Before: [72625.956765] xor: measuring software checksum speed [72625.993104] 8regs : 10169.000 MB/sec [72626.033099] 32regs : 12050.000 MB/sec [72626.073095] arm64_neon: 11100.000 MB/sec [72626.073097] xor: using function: 32regs (12050.000 MB/sec) After: [72599.650216] xor: measuring software checksum speed [72599.651188] 8regs : 10491 MB/sec [72599.652006] 32regs : 12345 MB/sec [72599.652871] arm64_neon : 11402 MB/sec [72599.652873] xor: using function: 32regs (12345 MB/sec) Link: https://lore.kernel.org/linux-crypto/20200923182230.22715-3-ardb@kernel.org/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: xor - defer load time benchmark to a later timeArd Biesheuvel
Currently, the XOR module performs its boot time benchmark at core initcall time when it is built-in, to ensure that the RAID code can make use of it when it is built-in as well. Let's defer this to a later stage during the boot, to avoid impacting the overall boot time of the system. Instead, just pick an arbitrary implementation from the list, and use that as the preliminary default. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25X.509: support OSCCA SM2-with-SM3 certificate verificationTianjia Zhang
The digital certificate format based on SM2 crypto algorithm as specified in GM/T 0015-2012. It was published by State Encryption Management Bureau, China. The method of generating Other User Information is defined as ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02. The x509 certificate supports SM2-with-SM3 type certificate verification. Because certificate verification requires ZA in addition to tbs data, ZA also depends on elliptic curve parameters and public key data, so you need to access tbs in sig and calculate ZA. Finally calculate the digest of the signature and complete the verification work. The calculation process of ZA is declared in specifications GM/T 0009-2012 and GM/T 0003.2-2012. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25X.509: support OSCCA certificate parseTianjia Zhang
The digital certificate format based on SM2 crypto algorithm as specified in GM/T 0015-2012. It was published by State Encryption Management Bureau, China. This patch adds the OID object identifier defined by OSCCA. The x509 certificate supports SM2-with-SM3 type certificate parsing. It uses the standard elliptic curve public key, and the sm2 algorithm signs the hash generated by sm3. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: sm2 - add SM2 test vectors to testmgrTianjia Zhang
Add testmgr test vectors for SM2 algorithm. These vectors come from `openssl pkeyutl -sign` and libgcrypt. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: testmgr - Fix potential memory leak in test_akcipher_one()Tianjia Zhang
When the 'key' allocation fails, the 'req' will not be released, which will cause memory leakage on this path. This patch adds a 'free_req' tag used to solve this problem, and two new err values are added to reflect the real reason of the error. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: testmgr - support test with different ciphertext per encryptionTianjia Zhang
Some asymmetric algorithms will get different ciphertext after each encryption, such as SM2, and let testmgr support the testing of such algorithms. In struct akcipher_testvec, set c and c_size to be empty, skip the comparison of the ciphertext, and compare the decrypted plaintext with m to achieve the test purpose. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: sm2 - introduce OSCCA SM2 asymmetric cipher algorithmTianjia Zhang
This new module implement the SM2 public key algorithm. It was published by State Encryption Management Bureau, China. List of specifications for SM2 elliptic curve public key cryptography: * GM/T 0003.1-2012 * GM/T 0003.2-2012 * GM/T 0003.3-2012 * GM/T 0003.4-2012 * GM/T 0003.5-2012 IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02 oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml scctc: http://www.gmbz.org.cn/main/bzlb.html Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: sm3 - export crypto_sm3_final functionTianjia Zhang
Both crypto_sm3_update and crypto_sm3_finup have been exported, exporting crypto_sm3_final, to avoid having to use crypto_sm3_finup(desc, NULL, 0, dgst) to calculate the hash in some cases. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: af_alg - add extra parameters for DRBG interfaceElena Petrova
Extend the user-space RNG interface: 1. Add entropy input via ALG_SET_DRBG_ENTROPY setsockopt option; 2. Add additional data input via sendmsg syscall. This allows DRBG to be tested with test vectors, for example for the purpose of CAVP testing, which otherwise isn't possible. To prevent erroneous use of entropy input, it is hidden under CRYPTO_USER_API_RNG_CAVP config option and requires CAP_SYS_ADMIN to succeed. Signed-off-by: Elena Petrova <lenaptr@google.com> Acked-by: Stephan Müller <smueller@chronox.de> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: proc - Removing some useless only space linesCorentin Labbe
Some line got only spaces, remove them Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-24md/raid6: let async recovery function support different page offsetYufen Yu
For now, asynchronous raid6 recovery calculate functions are require common offset for pages. But, we expect them to support different page offset after introducing stripe shared page. Do that by simplily adding page offset where each page address are referred. Then, replace the old interface with the new ones in raid6 and raid6test. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-09-24md/raid6: let syndrome computor support different page offsetYufen Yu
For now, syndrome compute functions require common offset in the pages array. However, we expect them to support different offset when try to use shared page in the following. Simplily covert them by adding page offset where each page address are referred. Since the only caller of async_gen_syndrome() and async_syndrome_val() are in raid6, we don't want to reserve the old interface but modify the interface directly. After that, replacing old interfaces with new ones for raid6 and raid6test. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-09-24md/raid5: add new xor function to support different page offsetYufen Yu
raid5 will call async_xor() and async_xor_val() to compute xor. For now, both of them require the common src/dst page offset. But, we want them to support different src/dst page offset for following shared page. Here, adding two new function async_xor_offs() and async_xor_val_offs() respectively for async_xor() and async_xor_val(). Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-09-18crypto: Kconfig - mark unused ciphers as obsoleteArd Biesheuvel
We have a few interesting pieces in our cipher museum, which are never used internally, and were only ever provided as generic C implementations. Unfortunately, we cannot simply remove this code, as we cannot be sure that it is not being used via the AF_ALG socket API, however unlikely. So let's mark the Anubis, Khazad, SEED and TEA algorithms as obsolete, which means they can only be enabled in the build if the socket API is enabled in the first place. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-11crypto: cbc - Remove cbc.hHerbert Xu
Now that crypto/cbc.h is only used by the generic cbc template, we can merge it back into the CBC code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-11crypto: arc4 - mark ecb(arc4) skcipher as obsoleteArd Biesheuvel
Cryptographic algorithms may have a lifespan that is significantly shorter than Linux's, and so we need to start phasing out algorithms that are known to be broken, and are no longer fit for general use. RC4 (or arc4) is a good example here: there are a few areas where its use is still somewhat acceptable, e.g., for interoperability with legacy wifi hardware that can only use WEP or TKIP data encryption, but that should not imply that, for instance, use of RC4 based EAP-TLS by the WPA supplicant for negotiating TKIP keys is equally acceptable, or that RC4 should remain available as a general purpose cryptographic transform for all in-kernel and user space clients. Now that all in-kernel users that need to retain support have moved to the arc4 library interface, and the known users of ecb(arc4) via the socket API (iwd [0] and libell [1][2]) have been updated to switch to a local implementation, we can take the next step, and mark the ecb(arc4) skcipher as obsolete, and only provide it if the socket API is enabled in the first place, as well as provide the option to disable all algorithms that have been marked as obsolete. [0] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=1db8a85a60c64523 [1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=53482ce421b727c2 [2] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=7f6a137809d42f6b Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-30Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix regression in af_alg that affects iwd - restore polling delay in qat - fix double free in ingenic on error path - fix potential build failure in sa2ul due to missing Kconfig dependency * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - Work around empty control messages without MSG_MORE crypto: sa2ul - add Kconfig selects to fix build error crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc crypto: qat - add delay before polling mailbox
2020-08-28crypto: ahash - Add init_tfm/exit_tfmHerbert Xu
This patch adds the type-safe init_tfm/exit_tfm functions to the ahash interface. This is meant to replace the unsafe cra_init and cra_exit interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-27crypto: af_alg - Work around empty control messages without MSG_MOREHerbert Xu
The iwd daemon uses libell which sets up the skcipher operation with two separate control messages. As the first control message is sent without MSG_MORE, it is interpreted as an empty request. While libell should be fixed to use MSG_MORE where appropriate, this patch works around the bug in the kernel so that existing binaries continue to work. We will print a warning however. A separate issue is that the new kernel code no longer allows the control message to be sent twice within the same request. This restriction is obviously incompatible with what iwd was doing (first setting an IV and then sending the real control message). This patch changes the kernel so that this is explicitly allowed. Reported-by: Caleb Jorden <caljorden@hotmail.com> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>