aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2019-12-04Merge tag 'acpi-5.5-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional ACPI updates from Rafael Wysocki: "These close a nasty race condition in the ACPI memory mappings management code and an invalid parameter check in a library routing, allow GPE 0xFF to be masked via kernel command line, add a new lid switch blacklist entry and clean up Kconfig. Specifics: - Fix locking issue in acpi_os_map_cleanup() leading to a race condition that can be harnessed for provoking a kernel panic from user space (Francesco Ruggeri) - Fix parameter check in acpi_bus_get_private_data() (Vamshi K Sthambamkadi) - Allow GPE 0xFF to be masked via kernel command line (Yunfeng Ye) - Add a new lid switch blacklist entry for Acer Switch 10 SW5-032 to the ACPI button driver (Hans de Goede) - Clean up Kconfig (Krzysztof Kozlowski)" * tag 'acpi-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data() ACPI: Fix Kconfig indentation ACPI: OSL: only free map once in osl.c ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switch ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100
2019-12-04Merge tag 'pm-5.5-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional power management updates from Rafael Wysocki: "These fix an ACPI EC driver bug exposed by the recent rework of the suspend-to-idle code flow, reintroduce frequency constraints into device PM QoS (in preparation for adding QoS support to devfreq), drop a redundant field from struct cpuidle_state and clean up Kconfig in some places. Specifics: - Avoid a race condition in the ACPI EC driver that may cause systems to be unable to leave suspend-to-idle (Rafael Wysocki) - Drop the "disabled" field, which is redundant, from struct cpuidle_state (Rafael Wysocki) - Reintroduce device PM QoS frequency constraints (temporarily introduced and than dropped during the 5.4 cycle) in preparation for adding QoS support to devfreq (Leonard Crestez) - Clean up indentation (in multiple places) and the cpuidle drivers help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)" * tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work PM / devfreq: Add missing locking while setting suspend_freq PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs PM / QoS: Initial kunit test PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX power: avs: Fix Kconfig indentation cpufreq: Fix Kconfig indentation cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation
2019-12-04Merge branches 'acpi-bus', 'acpi-button', 'acpi-sysfs' and 'acpi-misc'Rafael J. Wysocki
* acpi-bus: ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data() * acpi-button: ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switch * acpi-sysfs: ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100 * acpi-misc: ACPI: Fix Kconfig indentation
2019-12-04Merge branches 'pm-sleep', 'pm-cpuidle', 'pm-cpufreq', 'pm-devfreq' and 'pm-avs'Rafael J. Wysocki
* pm-sleep: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work * pm-cpuidle: cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation * pm-cpufreq: cpufreq: Fix Kconfig indentation * pm-devfreq: PM / devfreq: Add missing locking while setting suspend_freq * pm-avs: power: avs: Fix Kconfig indentation
2019-12-02ACPI: PM: s2idle: Rework ACPI events synchronizationRafael J. Wysocki
Note that the EC GPE processing need not be synchronized in acpi_s2idle_wake() after invoking acpi_ec_dispatch_gpe(), because that function checks the GPE status and dispatches its handler if need be and the SCI action handler is not going to run anyway at that point. Moreover, it is better to drain all of the pending ACPI events before restoring the working-state configuration of GPEs in acpi_s2idle_restore(), because those events are likely to be related to system wakeup, in which case they will not be relevant going forward. Rework the code to take these observations into account. Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-02ACPI: EC: Rework flushing of pending workRafael J. Wysocki
There is a race condition in the ACPI EC driver, between __acpi_ec_flush_event() and acpi_ec_event_handler(), that may cause systems to stay in suspended-to-idle forever after a wakeup event coming from the EC. Namely, acpi_s2idle_wake() calls acpi_ec_flush_work() to wait until the delayed work resulting from the handling of the EC GPE in acpi_ec_dispatch_gpe() is processed, and that function invokes __acpi_ec_flush_event() which uses wait_event() to wait for ec->nr_pending_queries to become zero on ec->wait, and that wait queue may be woken up too early. Suppose that acpi_ec_dispatch_gpe() has caused acpi_ec_gpe_handler() to run, so advance_transaction() has been called and it has invoked acpi_ec_submit_query() to queue up an event work item, so ec->nr_pending_queries has been incremented (under ec->lock). The work function of that work item, acpi_ec_event_handler() runs later and calls acpi_ec_query() to process the event. That function calls acpi_ec_transaction() which invokes acpi_ec_transaction_unlocked() and the latter wakes up ec->wait under ec->lock, but it drops that lock before returning. When acpi_ec_query() returns, acpi_ec_event_handler() acquires ec->lock and decrements ec->nr_pending_queries, but at that point __acpi_ec_flush_event() (woken up previously) may already have acquired ec->lock, checked the value of ec->nr_pending_queries (and it would not have been zero then) and decided to go back to sleep. Next, if ec->nr_pending_queries is equal to zero now, the loop in acpi_ec_event_handler() terminates, ec->lock is released and acpi_ec_check_event() is called, but it does nothing unless ec_event_clearing is equal to ACPI_EC_EVT_TIMING_EVENT (which is not the case by default). In the end, if no more event work items have been queued up while executing acpi_ec_transaction_unlocked(), there is nothing to wake up __acpi_ec_flush_event() again and it sleeps forever, so the suspend-to-idle loop cannot make progress and the system is permanently suspended. To avoid this issue, notice that it actually is not necessary to wait for ec->nr_pending_queries to become zero in every case in which __acpi_ec_flush_event() is used. First, during platform-based system suspend (not suspend-to-idle), __acpi_ec_flush_event() is called by acpi_ec_disable_event() after clearing the EC_FLAGS_QUERY_ENABLED flag, which prevents acpi_ec_submit_query() from submitting any new event work items, so calling flush_scheduled_work() and flushing ec_query_wq subsequently (in order to wait until all of the queries in that queue have been processed) would be sufficient to flush all of the pending EC work in that case. Second, the purpose of the flushing of pending EC work while suspended-to-idle described above really is to wait until the first event work item coming from acpi_ec_dispatch_gpe() is complete, because it should produce system wakeup events if that is a valid EC-based system wakeup, so calling flush_scheduled_work() followed by flushing ec_query_wq is also sufficient for that purpose. Rework the code to follow the above observations. Fixes: 56b9918490 ("PM: sleep: Simplify suspend-to-idle control flow") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-01Merge tag 'libnvdimm-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The highlight this cycle is continuing integration fixes for PowerPC and some resulting optimizations. Summary: - Updates to better support vmalloc space restrictions on PowerPC platforms. - Cleanups to move common sysfs attributes to core 'struct device_type' objects. - Export the 'target_node' attribute (the effective numa node if pmem is marked online) for regions and namespaces. - Miscellaneous fixups and optimizations" * tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) MAINTAINERS: Remove Keith from NVDIMM maintainers libnvdimm: Export the target_node attribute for regions and namespaces dax: Add numa_node to the default device-dax attributes libnvdimm: Simplify root read-only definition for the 'resource' attribute dax: Simplify root read-only definition for the 'resource' attribute dax: Create a dax device_type libnvdimm: Move nvdimm_bus_attribute_group to device_type libnvdimm: Move nvdimm_attribute_group to device_type libnvdimm: Move nd_mapping_attribute_group to device_type libnvdimm: Move nd_region_attribute_group to device_type libnvdimm: Move nd_numa_attribute_group to device_type libnvdimm: Move nd_device_attribute_group to device_type libnvdimm: Move region attribute group definition libnvdimm: Move attribute groups to device type libnvdimm: Remove prototypes for nonexistent functions libnvdimm/btt: fix variable 'rc' set but not used libnvdimm/pmem: Delete include of nd-core.h libnvdimm/namespace: Differentiate between probe mapping and runtime mapping libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe libnvdimm: Trivial comment fix ...
2019-11-29ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()Vamshi K Sthambamkadi
kmemleak reported backtrace: [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260 [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0 [<1180f4fc>] i2c_register_adapter+0x186/0x400 [<6083baf7>] i2c_add_adapter+0x4e/0x70 [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915] [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915] [<81911d4b>] i915_pci_probe+0x48/0x160 [i915] [<4b159af1>] pci_device_probe+0xdc/0x160 [<b3c64704>] really_probe+0x1ee/0x450 [<bc029f5a>] driver_probe_device+0x142/0x1b0 [<d8829d20>] device_driver_attach+0x49/0x50 [<de71f045>] __driver_attach+0xc9/0x150 [<df33ac83>] bus_for_each_dev+0x56/0xa0 [<80089bba>] driver_attach+0x19/0x20 [<cc73f583>] bus_add_driver+0x177/0x220 [<7b29d8c7>] driver_register+0x56/0xf0 In i2c_acpi_remove_space_handler(), a leak occurs whenever the "data" parameter is initialized to 0 before being passed to acpi_bus_get_private_data(). This is because the NULL pointer check in acpi_bus_get_private_data() (condition->if(!*data)) returns EINVAL and, in consequence, memory is never freed in i2c_acpi_remove_space_handler(). Fix the NULL pointer check in acpi_bus_get_private_data() to follow the analogous check in acpi_get_data_full(). Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29ACPI: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29ACPI: OSL: only free map once in osl.cFrancesco Ruggeri
acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock before freeing the map. This creates a race condition the can result in the map being freed more than once. A panic can be caused by running for ((i=0; i<10; i++)) do for ((j=0; j<100000; j++)) do cat /sys/firmware/acpi/tables/data/BERT >/dev/null done & done This patch makes sure that only the process that drops the reference to 0 does the freeing. Fixes: b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switchHans de Goede
The Acer Switch 10 SW5-032 _LID method is quite broken, it looks like this: Method (_LID, 0, NotSerialized) // _LID: Lid Status { If ((STAS & One)) { Local0 = One PBCG |= 0x05000000 HMCG |= 0x05000000 } Else { Local0 = Zero PBCG &= 0xF0FFFFFF HMCG &= 0xF0FFFFFF } ^^PCI0.GFX0.CLID = Local0 Return (Local0) } The problem here is the accesses to the PBCG and HMCG, these are the pinconf0 registers for the power, resp. the home button GPIO, e.g. PBCG is declared as: OperationRegion (PWBT, SystemMemory, 0xFED0E080, 0x10) Field (PWBT, DWordAcc, NoLock, Preserve) { PBCG, 32, PBV1, 32, PBSA, 32, PBV2, 32 } Where 0xFED0E000 is the base address of the GPO2 device and 0x80 is the offset for the pin used for the powerbutton. The problem here is this line in _LID: PBCG |= 0x05000000 This changes the trigger flags of the GPIO, changing when it generates interrupts. Note it does not clear the original flags. Linux uses an edge triggered interrupt on both positive and negative edges. This |= adds the BYT_TRIG_LVL flag to this, so now it is turned into a level interrupt which fires both when low and high, iow it simply always fires leading to an interrupt storm, the tablet immediately waking up from suspend again, etc. There is nothing we can do to fix this, except for a DSDT override, which the user needs to do manually. The only thing we can do is never call _LID, which requires disabling the lid-switch functionality altogether. This commit adds a quirk for this, as no lid-switch function is better then the interrupt storm. A user manually applying a DSDT override can also override the quirk on the kernel cmdline. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-28Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-26Merge tag 'devprop-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Add support for printing fwnode names using a new conversion specifier "%pfw" (Sakari Ailus), clean up the software node and efi/apple-properties code in preparation for improved software node reference properties handling (Dmitry Torokhov) and fix the struct fwnode_operations description (Heikki Krogerus)" * tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) software node: simplify property_entry_read_string_array() software node: unify PROPERTY_ENTRY_XXX macros software node: remove property_entry_read_uNN_array functions software node: get rid of property_set_pointer() software node: clean up property_copy_string_array() software node: mark internal macros with double underscores efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN() software node: remove DEV_PROP_MAX device property: Fix the description of struct fwnode_operations lib/test_printf: Add tests for %pfw printk modifier lib/vsprintf: Add %pfw conversion specifier for printing fwnode names lib/vsprintf: OF nodes are first and foremost, struct device_nodes lib/vsprintf: Make use of fwnode API to obtain node names and separators lib/vsprintf: Add a note on re-using %pf or %pF lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps device property: Add a function to obtain a node's prefix device property: Add fwnode_get_name for returning the name of a node device property: Add functions for accessing node's parents device property: Move fwnode_get_parent() up ...
2019-11-26Merge tag 'acpi-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20191018, add support for EFI specific purpose memory, update the ACPI EC driver to make it work on systems with hardware-reduced ACPI, improve ACPI-based device enumeration for some platforms, rework the lid blacklist handling in the button driver and add more lid quirks to it, unify ACPI _HID/_UID matching, fix assorted issues and clean up the code and documentation. Specifics: - Update the ACPICA code in the kernel to upstream revision 20191018 including: * Fixes for Clang warnings (Bob Moore) * Fix for possible overflow in get_tick_count() (Bob Moore) * Introduction of acpi_unload_table() (Bob Moore) * Debugger and utilities updates (Erik Schmauss) * Fix for unloading tables loaded via configfs (Nikolaus Voss) - Add support for EFI specific purpose memory to optionally allow either application-exclusive or core-kernel-mm managed access to differentiated memory (Dan Williams) - Fix and clean up processing of the HMAT table (Brice Goglin, Qian Cai, Tao Xu) - Update the ACPI EC driver to make it work on systems with hardware-reduced ACPI (Daniel Drake) - Always build in support for the Generic Event Device (GED) to allow one kernel binary to work both on systems with full hardware ACPI and hardware-reduced ACPI (Arjan van de Ven) - Fix the table unload mechanism to unregister platform devices created when the given table was loaded (Andy Shevchenko) - Rework the lid blacklist handling in the button driver and add more lid quirks to it (Hans de Goede) - Improve ACPI-based device enumeration for some platforms based on Intel BayTrail SoCs (Hans de Goede) - Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and prevent handlers from being registered for unhandled PMIC OpRegions (Hans de Goede) - Unify ACPI _HID/_UID matching (Andy Shevchenko) - Clean up documentation and comments (Cao jin, James Pack, Kacper Piwiński)" * tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) ACPI: OSI: Shoot duplicate word ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory ACPICA: Update version to 20191018 ACPICA: debugger: remove leading whitespaces when converting a string to a buffer ACPICA: acpiexec: initialize all simple types and field units from user input ACPICA: debugger: add field unit support for acpi_db_get_next_token ...
2019-11-26Merge tag 'pm-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include cpuidle changes to use nanoseconds (instead of microseconds) as the unit of time and to simplify checks for disabled idle states in the idle loop, some cpuidle fixes and governor updates, assorted cpufreq updates (driver updates mostly and a few core fixes and cleanups), devfreq updates (dominated by the tegra30 driver changes), new CPU IDs for the RAPL power capping driver, relatively minor updates of the generic power domains (genpd) and operation performance points (OPP) frameworks, and assorted fixes and cleanups. There are also two maintainer information updates: Chanwoo Choi will be maintaining the devfreq subsystem going forward and Todd Brandt is going to maintain the pm-graph utility (created by him). Specifics: - Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki) - Fix and clean up the teo cpuidle governor (Rafael Wysocki) - Fix the cpuidle registration error code path (Zhenzhong Duan) - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei) - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano) - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar) - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen) - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef) * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard) * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller) * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla) * Fix for imx's default speed grade value (Anson Huang) * Minor cleanup of the s3c64xx driver (Nathan Chancellor) * CPU speed bin detection fix for sun50i (Ondrej Jirman) - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez) * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko) * Improve an error message in devfreq_add_device() (Matthias Kaehlcke) - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko) * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny) * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski) - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui) - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson) - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd) - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft) - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan) - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven) - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas) - Add pm-graph utility entry to MAINTAINERS (Todd Brandt) - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel) * Fix build warnings (Nathan Chancellor) * Improve mperf_monitor handling (Janakarajan Natarajan)" * tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) PM: Wrap documentation to fit in 80 columns cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpufreq: Register drivers only after CPU devices have been registered cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition PM / wakeirq: remove unnecessary parentheses power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call cpuidle: Use nanoseconds as the unit of time PM / OPP: Support adjusting OPP voltages at runtime PM / core: Clean up some function headers in power.h cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse ...
2019-11-26Merge branch 'acpi-mm'Rafael J. Wysocki
* acpi-mm: ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
2019-11-26Merge branches 'acpi-utils', 'acpi-platform', 'acpi-video' and 'acpi-doc'Rafael J. Wysocki
* acpi-utils: iommu/amd: Switch to use acpi_dev_hid_uid_match() mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match() ACPI / LPSS: Switch to use acpi_dev_hid_uid_match() ACPI / utils: Introduce acpi_dev_hid_uid_match() helper ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI ACPI / utils: Describe function parameters in kernel-doc * acpi-platform: ACPI: platform: Unregister stale platform devices ACPI: Always build evged in * acpi-video: ACPI: video: update doc for acpi_video_bus_DOS() * acpi-doc: ACPI: Documentation: Minor spelling fix in namespace.rst
2019-11-26Merge branches 'acpi-ec', 'acpi-soc', 'acpi-pmic' and 'acpi-button'Rafael J. Wysocki
* acpi-ec: ACPI: EC: add support for hardware-reduced systems ACPI: EC: tweak naming in preparation for GpioInt support * acpi-soc: ACPI: LPSS: Add dmi quirk for skipping _DEP check for some device-links ACPI: LPSS: Add LNXVIDEO -> BYT I2C1 to lpss_device_links ACPI: LPSS: Add LNXVIDEO -> BYT I2C7 to lpss_device_links * acpi-pmic: ACPI / PMIC: Add Cherry Trail Crystal Cove PMIC OpRegion driver ACPI / PMIC: Add byt prefix to Crystal Cove PMIC OpRegion driver ACPI / PMIC: Do not register handlers for unhandled OpRegions * acpi-button: ACPI: button: Remove unused acpi_lid_notifier_[un]register() functions ACPI: button: Add DMI quirk for Asus T200TA ACPI: button: Add DMI quirk for Medion Akoya E2215T ACPI: button: Turn lid_blacklst DMI table into a generic quirk table ACPI: button: Allow disabling LID support with the lid_init_state module option ACPI: button: Refactor lid_init_state module parsing code
2019-11-26Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20191018 ACPICA: debugger: remove leading whitespaces when converting a string to a buffer ACPICA: acpiexec: initialize all simple types and field units from user input ACPICA: debugger: add field unit support for acpi_db_get_next_token ACPICA: debugger: surround field unit output with braces '{' ACPICA: debugger: add command to dump all fields of particular subtype ACPICA: utilities: add flag to only display data when dumping buffers ACPICA: make acpi_load_table() return table index ACPICA: Add new external interface, acpi_unload_table() ACPICA: More Clang changes ACPICA: Win OSL: Replace get_tick_count with get_tick_count64 ACPICA: Results from Clang
2019-11-26Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations cpuidle: Use nanoseconds as the unit of time cpuidle: Consolidate disabled state checks ACPI: processor_idle: Skip dummy wait if kernel is in guest cpuidle: Do not unset the driver if it is there already cpuidle: teo: Fix "early hits" handling for disabled idle states cpuidle: teo: Consider hits and misses metrics of disabled states cpuidle: teo: Rename local variable in teo_select() cpuidle: teo: Ignore disabled idle states that are too deep
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-21dma-mapping: treat dev->bus_dma_mask as a DMA limitNicolas Saenz Julienne
Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-19libnvdimm: Move nvdimm_bus_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nvdimm_bus_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309903815.1582359.6418211876315050283.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nvdimm_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nvdimm_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309903201.1582359.10966209746585062329.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_mapping_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_mapping_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309902686.1582359.6749533709859492704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_region_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_region_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309902169.1582359.16828508538444551337.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_numa_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_numa_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157401269537.43284.14411189404186877352.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-11-19ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100Yunfeng Ye
The commit 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs") says: "Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256 GPEs can be masked" But the masking of GPE 0xFF it not supported and the check condition "gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of gpe is u8. So modify the macro ACPI_MASKABLE_GPE_MAX to 0x100, and drop the "gpe > ACPI_MASKABLE_GPE_MAX" check. In addition, update the docs "Format" for acpi_mask_gpe parameter. Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs") Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> [ rjw: Use u16 as gpe data type in acpi_gpe_apply_masked_gpes() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-17libnvdimm: Move nd_device_attribute_group to device_typeDan Williams
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_device_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. For regions this creates a new nd_region_attribute_groups[] added to the per-region device-type instances. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309901138.1582359.12909354140826530394.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-11-13ACPI: OSI: Shoot duplicate wordCao jin
"this" is duplicated. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-12ACPI: HMAT: use %u instead of %d to print u32 valuesTao Xu
Use %u instead of %d to print u32 values to expand the value range, especially when latency or bandwidth value is bigger than INT_MAX. Then HMAT latency can support up to 4.29s and bandwidth can support up to 4PB/s. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jingqi Liu <Jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-12ACPI: NUMA: HMAT: fix a section mismatchQian Cai
Commit cf8741ac57ed ("ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device") introduced a linker warning, WARNING: vmlinux.o(.text+0x64ec3c): Section mismatch in reference from the function hmat_register_target() to the function .init.text:hmat_register_target_devices() The function hmat_register_target() references the function __init hmat_register_target_devices(). Since hmat_register_target() is also called from hmat_callback(), and then register_hotmemory_notifier(), where it should not be freed when hmat_init() is done, it indicates that the __init annotation of hmat_register_target_devices() is incorrect. Fixes: cf8741ac57ed ("ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-07ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxmBrice Goglin
On systems where PXMs and nids are in different order, memory initiators exposed in sysfs could be wrong: On dual-socket CLX with SNC enabled (4 nodes, 1 and 2 swapped between PXMs and nids), node1 would only get node2 as initiator, and node2 would only get node1. With this patch, we get node1 as the only initiator of itself, and node2 as the only initiator of itself, as expected. This should likely go to stable up to 5.2. Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-07ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" deviceDan Williams
Memory that has been tagged EFI_MEMORY_SP, and has performance properties described by the ACPI HMAT is expected to have an application specific consumer. Those consumers may want 100% of the memory capacity to be reserved from any usage by the kernel. By default, with this enabling, a platform device is created to represent this differentiated resource. The device-dax "hmem" driver claims these devices by default and provides an mmap interface for the target application. If the administrator prefers, the hmem resource range can be made available to the core-mm via the device-dax hotplug facility, kmem, to online the memory with its own numa node. This was tested with an emulated HMAT produced by qemu (with the pending HMAT enabling patches), and "efi_fake_mem=8G@9G:0x40000" on the kernel command line to mark the memory ranges associated with node2 and node3 as EFI_MEMORY_SP. qemu numa configuration options: -numa node,mem=4G,cpus=0-19,nodeid=0 -numa node,mem=4G,cpus=20-39,nodeid=1 -numa node,mem=4G,nodeid=2 -numa node,mem=4G,nodeid=3 -numa dist,src=0,dst=0,val=10 -numa dist,src=0,dst=1,val=21 -numa dist,src=0,dst=2,val=21 -numa dist,src=0,dst=3,val=21 -numa dist,src=1,dst=0,val=21 -numa dist,src=1,dst=1,val=10 -numa dist,src=1,dst=2,val=21 -numa dist,src=1,dst=3,val=21 -numa dist,src=2,dst=0,val=21 -numa dist,src=2,dst=1,val=21 -numa dist,src=2,dst=2,val=10 -numa dist,src=2,dst=3,val=21 -numa dist,src=3,dst=0,val=21 -numa dist,src=3,dst=1,val=21 -numa dist,src=3,dst=2,val=21 -numa dist,src=3,dst=3,val=10 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,base-lat=10,latency=5 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,base-lat=10,latency=10 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10 -numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-latency,base-lat=10,latency=15 -numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=15 -numa hmat-lb,initiator=0,target=3,hierarchy=memory,data-type=access-latency,base-lat=10,latency=20 -numa hmat-lb,initiator=0,target=3,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=20 -numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-latency,base-lat=10,latency=10 -numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=10 -numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-latency,base-lat=10,latency=5 -numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=5 -numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-latency,base-lat=10,latency=15 -numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=15 -numa hmat-lb,initiator=1,target=3,hierarchy=memory,data-type=access-latency,base-lat=10,latency=20 -numa hmat-lb,initiator=1,target=3,hierarchy=memory,data-type=access-bandwidth,base-bw=20,bandwidth=20 Result: [ { "path":"\/platform\/hmem.1", "id":1, "size":"4.00 GiB (4.29 GB)", "align":2097152, "devices":[ { "chardev":"dax1.0", "size":"4.00 GiB (4.29 GB)" } ] }, { "path":"\/platform\/hmem.0", "id":0, "size":"4.00 GiB (4.29 GB)", "align":2097152, "devices":[ { "chardev":"dax0.0", "size":"4.00 GiB (4.29 GB)" } ] } ] [..] 240000000-43fffffff : Soft Reserved 240000000-33fffffff : hmem.0 240000000-33fffffff : dax0.0 340000000-43fffffff : hmem.1 340000000-43fffffff : dax1.0 Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-07ACPI: NUMA: HMAT: Register HMAT at device_initcall levelDan Williams
In preparation for registering device-dax instances for accessing EFI specific-purpose memory, arrange for the HMAT registration to occur later in the init process. Critically HMAT initialization needs to occur after e820__reserve_resources_late() which is the point at which the iomem resource tree is populated with "Application Reserved" (IORES_DESC_APPLICATION_RESERVED). e820__reserve_resources_late() happens at subsys_initcall time. Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-07ACPI: NUMA: Establish a new drivers/acpi/numa/ directoryDan Williams
Currently hmat.c lives under an "hmat" directory which does not enhance the description of the file. The initial motivation for giving hmat.c its own directory was to delineate it as mm functionality in contrast to ACPI device driver functionality. As ACPI continues to play an increasing role in conveying memory location and performance topology information to the OS take the opportunity to co-locate these NUMA relevant tables in a combined directory. numa.c is renamed to srat.c and moved to drivers/acpi/numa/ along with hmat.c. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-01Merge tag 'pm-5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a recently introduced (mostly theoretical) issue that the requests to confine the maximum CPU frequency coming from the platform firmware may not be taken into account if multiple CPUs are covered by one cpufreq policy on a system with ACPI" * tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Add QoS requests for all CPUs
2019-10-28ACPICA: debugger: remove leading whitespaces when converting a string to a ↵Erik Schmauss
buffer ACPICA commit 1b7228072f254a5b02625586ff7d561757b7fc2d By removing leading whitespaces, the conversion computes the correct number of elements in a given buffer or field encoding that contains leading whitespaces. Link: https://github.com/acpica/acpica/commit/1b722807 Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: acpiexec: initialize all simple types and field units from user inputErik Schmauss
ACPICA commit 367b363edc5fa1f93bbc14e4a1e05f34fef765a2 acpiexec allows a user to provide a file that indicates values to initialize named objects during table load with the -fi option. This can provide more accurate simulation by setting named objects to values found during OS runtime. Previously, this option only supported integer objects. This change adds user initialization support for field units, strings, buffers, and packages. Link: https://github.com/acpica/acpica/commit/367b363e Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: debugger: add field unit support for acpi_db_get_next_tokenErik Schmauss
ACPICA commit d509afa88e9415f13a3283c38ce9ee034634ae24 Since field unit data output from the debugger are now surrounded by braces '{', support has been added to acpi_db_get_next_token to recognize strings beginning with this character as a ACPI_TYPE_FIELD_UNIT. Link: https://github.com/acpica/acpica/commit/d509afa8 Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: debugger: surround field unit output with braces '{'Erik Schmauss
ACPICA commit 76ca57291d007d33087982a4b28cd1ee9bcd37a6 This helps differentiate the type of named objects between field units and buffers. In other words, without this symbol, it would be difficult to tell whether a particular named object is a buffer or a field unit. Link: https://github.com/acpica/acpica/commit/76ca5729 Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: debugger: add command to dump all fields of particular subtypeErik Schmauss
In acpiexec, this can be invoked by typing "fields" followed by a number representing the address space ID of that field. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: utilities: add flag to only display data when dumping buffersErik Schmauss
ACPICA commit fb18935fcf940c5854a055975c6b9ee31f0e1a5a Link: https://github.com/acpica/acpica/commit/fb18935f Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: make acpi_load_table() return table indexNikolaus Voss
ACPICA commit d1716a829d19be23277d9157c575a03b9abb7457 For unloading an ACPI table, it is necessary to provide the index of the table. The method intended for dynamically loading or hotplug addition of tables, acpi_load_table(), should provide this information via an optional pointer to the loaded table index. This patch fixes the table unload function of acpi_configfs. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: d06c47e3dd07f ("ACPI: configfs: Resolve objects on host-directed table loads") Link: https://github.com/acpica/acpica/commit/d1716a82 Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: Add new external interface, acpi_unload_table()Bob Moore
ACPICA commit c69369cd9cf0134e1aac516e97d612947daa8dc2 Unload a table via the table_index. Link: https://github.com/acpica/acpica/commit/c69369cd Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: More Clang changesBob Moore
ACPICA commit 54b3aefb5de860306951c8c3339b1c37dcdf1b39 V8.0.1: Fixed all "dead assignment" warnings. Link: https://github.com/acpica/acpica/commit/54b3aefb Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: Win OSL: Replace get_tick_count with get_tick_count64Bob Moore
ACPICA commit 7bc16c650317001bc82d4bae227b888a49c51f5e Avoid possible overflow from get_tick_count. Also, cast math using ACPI_100NSEC_PER_MSEC to uint64. Link: https://github.com/acpica/acpica/commit/7bc16c65 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPICA: Results from ClangBob Moore
ACPICA commit 1f08279b3eb13f17004159c28c391a390cd68feb Changes/fixes From Clang V5.0.1. Mostly "set but never read" warnings. Link: https://github.com/acpica/acpica/commit/1f08279b Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPI: EC: add support for hardware-reduced systemsDaniel Drake
As defined in the ACPI spec section 12.11, ACPI hardware-reduced platforms define the EC SCI interrupt as a GpioInt in the _CRS object. This replaces the previous way of using a GPE for this interrupt; GPE blocks are not available on reduced hardware platforms. Add support for handling this interrupt as an EC event source, and avoid GPE usage on reduced hardware platforms. This enables the use of several media keys (e.g. screen brightness up/down) on Asus UX434DA. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-28ACPI: EC: tweak naming in preparation for GpioInt supportDaniel Drake
In preparation for supporting reduced hardware platforms which use a GpioInt instead of a GPE, rename some functions and constants to have more appropriate names. No logical changes. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>