aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2013-10-09Merge tag 'v3.12-rc4' into sched/coreIngo Molnar
Merge Linux v3.12-rc4 to fix a conflict and also to refresh the tree before applying more scheduler patches. Conflicts: arch/avr32/include/asm/Kbuild Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-01ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device()Rafael J. Wysocki
Commit caf5c03f (ACPI: Move acpi_bus_get_device() from bus.c to scan.c) caused acpi_bus_get_device() to be exported using EXPORT_SYMBOL_GPL(), but that broke some binary drivers in existence, so revert that change. Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-25ACPI / scan: fix typo in comments of acpi_bus_unregister_driver()Hanjun Guo
"APIC" should be "ACPI" here. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-25sched, idle: Fix the idle polling state logicPeter Zijlstra
Mike reported that commit 7d1a9417 ("x86: Use generic idle loop") regressed several workloads and caused excessive reschedule interrupts. The patch in question failed to notice that the x86 code had an inverted sense of the polling state versus the new generic code (x86: default polling, generic: default !polling). Fix the two prominent x86 mwait based idle drivers and introduce a few new generic polling helpers (fixing the wrong smp_mb__after_clear_bit usage). Also switch the idle routines to using tif_need_resched() which is an immediate TIF_NEED_RESCHED test as opposed to need_resched which will end up being slightly different. Reported-by: Mike Galbraith <bitbucket@online.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: lenb@kernel.org Cc: tglx@linutronix.de Link: http://lkml.kernel.org/n/tip-nc03imb0etuefmzybzj7sprf@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-25ACPI / IPMI: Fix atomic context requirement of ipmi_msg_handler()Lv Zheng
This patch fixes the issues indicated by the test results that ipmi_msg_handler() is invoked in atomic context. BUG: scheduling while atomic: kipmi0/18933/0x10000100 Modules linked in: ipmi_si acpi_ipmi ... CPU: 3 PID: 18933 Comm: kipmi0 Tainted: G AW 3.10.0-rc7+ #2 Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.0027.070120100606 07/01/2010 ffff8838245eea00 ffff88103fc63c98 ffffffff814c4a1e ffff88103fc63ca8 ffffffff814bfbab ffff88103fc63d28 ffffffff814c73e0 ffff88103933cbd4 0000000000000096 ffff88103fc63ce8 ffff88102f618000 ffff881035c01fd8 Call Trace: <IRQ> [<ffffffff814c4a1e>] dump_stack+0x19/0x1b [<ffffffff814bfbab>] __schedule_bug+0x46/0x54 [<ffffffff814c73e0>] __schedule+0x83/0x59c [<ffffffff81058853>] __cond_resched+0x22/0x2d [<ffffffff814c794b>] _cond_resched+0x14/0x1d [<ffffffff814c6d82>] mutex_lock+0x11/0x32 [<ffffffff8101e1e9>] ? __default_send_IPI_dest_field.constprop.0+0x53/0x58 [<ffffffffa09e3f9c>] ipmi_msg_handler+0x23/0x166 [ipmi_si] [<ffffffff812bf6e4>] deliver_response+0x55/0x5a [<ffffffff812c0fd4>] handle_new_recv_msgs+0xb67/0xc65 [<ffffffff81007ad1>] ? read_tsc+0x9/0x19 [<ffffffff814c8620>] ? _raw_spin_lock_irq+0xa/0xc [<ffffffffa09e1128>] ipmi_thread+0x5c/0x146 [ipmi_si] ... Also Tony Camuso says: We were getting occasional "Scheduling while atomic" call traces during boot on some systems. Problem was first seen on a Cisco C210 but we were able to reproduce it on a Cisco c220m3. Setting CONFIG_LOCKDEP and LOCKDEP_SUPPORT to 'y' exposed a lockdep around tx_msg_lock in acpi_ipmi.c struct acpi_ipmi_device. ================================= [ INFO: inconsistent lock state ] 2.6.32-415.el6.x86_64-debug-splck #1 --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/3/17 [HC0[0]:SC1[1]:HE1:SE0] takes: (&ipmi_device->tx_msg_lock){+.?...}, at: [<ffffffff81337a27>] ipmi_msg_handler+0x71/0x126 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810ba11c>] __lock_acquire+0x63c/0x1570 [<ffffffff810bb0f4>] lock_acquire+0xa4/0x120 [<ffffffff815581cc>] __mutex_lock_common+0x4c/0x400 [<ffffffff815586ea>] mutex_lock_nested+0x4a/0x60 [<ffffffff8133789d>] acpi_ipmi_space_handler+0x11b/0x234 [<ffffffff81321c62>] acpi_ev_address_space_dispatch+0x170/0x1be The fix implemented by this change has been tested by Tony: Tested the patch in a boot loop with lockdep debug enabled and never saw the problem in over 400 reboots. Reported-and-tested-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-12Merge tag 'pm+acpi-fixes-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "All of these commits are fixes that have emerged recently and some of them fix bugs introduced during this merge window. Specifics: 1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events After the recent ACPIPHP changes we've seen some interesting breakage on a system that triggers device check notifications during boot for non-existing devices. Although those notifications are really spurious, we should be able to deal with them nevertheless and that shouldn't introduce too much overhead. Four commits to make that work properly. 2) Memory hotplug and hibernation mutual exclusion rework This was maent to be a cleanup, but it happens to fix a classical ABBA deadlock between system suspend/hibernation and ACPI memory hotplug which is possible if they are started roughly at the same time. Three commits rework memory hotplug so that it doesn't acquire pm_mutex and make hibernation use device_hotplug_lock which prevents it from racing with memory hotplug. 3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix The ACPI LPSS driver crashes during boot on Apple Macbook Air with Haswell that has slightly unusual BIOS configuration in which one of the LPSS device's _CRS method doesn't return all of the information expected by the driver. Fix from Mika Westerberg, for stable. 4) ACPICA fix related to Store->ArgX operation AML interpreter fix for obscure breakage that causes AML to be executed incorrectly on some machines (observed in practice). From Bob Moore. 5) ACPI core fix for PCI ACPI device objects lookup There still are cases in which there is more than one ACPI device object matching a given PCI device and we don't choose the one that the BIOS expects us to choose, so this makes the lookup take more criteria into account in those cases. 6) Fix to prevent cpuidle from crashing in some rare cases If the result of cpuidle_get_driver() is NULL, which can happen on some systems, cpuidle_driver_ref() will crash trying to use that pointer and the Daniel Fu's fix prevents that from happening. 7) cpufreq fixes related to CPU hotplug Stephen Boyd reported a number of concurrency problems with cpufreq related to CPU hotplug which are addressed by a series of fixes from Srivatsa S Bhat and Viresh Kumar. 8) cpufreq fix for time conversion in time_in_state attribute Time conversion carried out by cpufreq when user space attempts to read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state won't work correcty if cputime_t doesn't map directly to jiffies. Fix from Andreas Schwab. 9) Revert of a troublesome cpufreq commit Commit 7c30ed5 (cpufreq: make sure frequency transitions are serialized) was intended to address some known concurrency problems in cpufreq related to the ordering of transitions, but unfortunately it introduced several problems of its own, so I decided to revert it now and address the original problems later in a more robust way. 10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle. 11) cpufreq fixes related to system suspend/resume The recent cpufreq changes that made it preserve CPU sysfs attributes over suspend/resume cycles introduced a possible NULL pointer dereference that caused it to crash during the second attempt to suspend. Three commits from Srivatsa S Bhat fix that problem and a couple of related issues. 12) cpufreq locking fix cpufreq_policy_restore() should acquire the lock for reading, but it acquires it for writing. Fix from Lan Tianyu" * tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) cpufreq: Acquire the lock in cpufreq_policy_restore() for reading cpufreq: Prevent problems in update_policy_cpu() if last_cpu == new_cpu cpufreq: Restructure if/else block to avoid unintended behavior cpufreq: Fix crash in cpufreq-stats during suspend/resume intel_pstate: Add Haswell CPU models Revert "cpufreq: make sure frequency transitions are serialized" cpufreq: Use signed type for 'ret' variable, to store negative error values cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes cpufreq: Synchronize the cpufreq store_*() routines with CPU hotplug cpufreq: Invoke __cpufreq_remove_dev_finish() after releasing cpu_hotplug.lock cpufreq: Split __cpufreq_remove_dev() into two parts cpufreq: Fix wrong time unit conversion cpufreq: serialize calls to __cpufreq_governor() cpufreq: don't allow governor limits to be changed when it is disabled ACPI / bind: Prefer device objects with _STA to those without it ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks ACPI / hotplug / PCI: Use _OST to notify firmware about notify status ACPI / hotplug / PCI: Avoid doing too much for spurious notifies ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field. ACPI / hotplug / PCI: Don't trim devices before scanning the namespace ...
2013-09-11Merge branch 'acpi-bind'Rafael J. Wysocki
* acpi-bind: ACPI / bind: Prefer device objects with _STA to those without it
2013-09-10Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / LPSS: don't crash if a device has no MMIO resources
2013-09-10Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field.
2013-09-10Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: PM / hibernate / memory hotplug: Rework mutual exclusion PM / hibernate: Create memory bitmaps after freezing user space ACPI / scan: Change ordering of locks for device hotplug
2013-09-09ACPI / bind: Prefer device objects with _STA to those without itRafael J. Wysocki
As reported at https://bugzilla.kernel.org/show_bug.cgi?id=60829, there still are cases in which do_find_child() doesn't choose the ACPI device object it is "expected" to choose if there are more such objects matching one PCI device present. This particular problem may be worked around by making do_find_child() return device obejcts witn _STA whose result indicates that the device is enabled before device objects without _STA if there's more than one device object to choose from. This change doesn't affect the case in which there's only one matching ACPI device object per PCI device. References: https://bugzilla.kernel.org/show_bug.cgi?id=60829 Reported-by: Peter Wu <lekensteyn@gmail.com> Tested-by: Felix Lisczyk <felix.lisczyk@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-06ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field.Bob Moore
This change fixes a problem where a Store operation to an ArgX object that contained a reference to a field object did not complete the automatic dereference and then write to the actual field object. Instead, the object type of the field object was inadvertently changed to match the type of the source operand. The new behavior will actually write to the field object (buffer field or field unit), thus matching the correct ACPI-defined behavior. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-05Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - OF and ACPI helpers are now included in the core, and not in external files anymore. This removes dependency problems for modules and is cleaner, in general. - mv64xxx-driver gains fifo usage to support mv78230 - imx-driver overhaul to support VF610 - various cleanups, most notably related to devm_* and CONFIG_PM usage - driver bugfixes and smaller feature additions" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: rcar: add rcar-H2 support i2c: sirf: retry 3 times as sometimes we get random noack and timeout i2c: sirf: support reverse direction of address i2c: sirf: fix the typo for setting bitrate to less than 100k i2c: sirf: we need to wait I2C_RESET status in resume i2c: sirf: reset i2c controller early after we get a noack i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI i2c: designware: make HCNT/LCNT values configurable i2c: mpc: cleanup clock API use i2c: pnx: fix error return code in i2c_pnx_probe() i2c: ismt: add error return code in probe() i2c: mv64xxx: fix typo in binding documentation i2c: imx: use exact SoC revision to document binding i2c: move ACPI helpers into the core i2c: move OF helpers into the core i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889) i2c: mv64xxx: Add I2C Transaction Generator support i2c: powermac: fix return path on error Documentation: i2c: Fix example in instantiating-devices i2c: tiny-usb: do not use stack as URB transfer_buffer ...
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS changes from Ingo Molnar: "[ The reason for drivers/ updates is that Boris asked for the drivers/edac/ changes to go via x86/ras in this cycle ] Main changes: - AMD CPUs: . Add ECC event decoding support for new F15h models . Various erratum fixes . Fix single-channel on dual-channel-controllers bug. - Intel CPUs: . UC uncorrectable memory error parsing fix . Add support for CMC (Corrected Machine Check) 'FF' (Firmware First) flag in the APEI HEST - Various cleanups and fixes" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: amd64_edac: Fix incorrect wraparounds amd64_edac: Correct erratum 505 range cpc925_edac: Use proper array termination x86/mce, acpi/apei: Only disable banks listed in HEST if mce is configured amd64_edac: Get rid of boot_cpu_data accesses amd64_edac: Add ECC decoding support for newer F15h models x86, amd_nb: Clarify F15h, model 30h GART and L3 support pci_ids: Add PCI device ID functions 3 and 4 for newer F15h models. x38_edac: Make a local function static i3200_edac: Make a local function static x86/mce: Pay no attention to 'F' bit in MCACOD when parsing 'UC' errors APEI/ERST: Fix error message formatting amd64_edac: Fix single-channel setups EDAC: Replace strict_strtol() with kstrtol() mce: acpi/apei: Soft-offline a page on firmware GHES notification mce: acpi/apei: Add a boot option to disable ff mode for corrected errors mce: acpi/apei: Honour Firmware First for MCA banks listed in APEI HEST CMC
2013-09-03Merge tag 'please-pull-pstore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore changes from Tony Luck: "A big part of this is the addition of compression to the generic pstore layer so that all backends can use the pitiful amounts of storage they control more effectively. Three other small fixes/cleanups too. * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore/ram: (really) fix undefined usage of rounddown_pow_of_two pstore/ram: Read and write to the 'compressed' flag of pstore efi-pstore: Read and write to the 'compressed' flag of pstore erst: Read and write to the 'compressed' flag of pstore powerpc/pseries: Read and write to the 'compressed' flag of pstore pstore: Add file extension to pstore file if compressed pstore: Add decompression support to pstore pstore: Introduce new argument 'compressed' in the read callback pstore: Add compression support to pstore pstore/Kconfig: Select ZLIB_DEFLATE and ZLIB_INFLATE when PSTORE is selected pstore: Add new argument 'compressed' in pstore write callback powerpc/pseries: Remove (de)compression in nvram with pstore enabled pstore: d_alloc_name() doesn't return an ERR_PTR acpi/apei/erst: Add missing iounmap() on error in erst_exec_move_data()
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-02ACPI / LPSS: don't crash if a device has no MMIO resourcesMika Westerberg
Intel LPSS devices that are enumerated from ACPI have both MMIO and IRQ resources returned in their _CRS method. However, Apple Macbook Air with Haswell has LPSS devices enumerated from PCI bus instead and _CRS method returns only an interrupt number (but the device has _HID set that causes the scan handler to match it). The current ACPI / LPSS code sets pdata->dev_desc only when MMIO resource is found for the device and in case of Macbook Air it is never found. That leads to a NULL pointer dereference in register_device_clock(). Correct this by always setting the pdata->dev_desc. Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-31ACPI / scan: Change ordering of locks for device hotplugRafael J. Wysocki
Change the ordering of device hotplug locks in scan.c so that acpi_scan_lock is always acquired after device_hotplug_lock. This will make it possible to use device_hotplug_lock around some code paths that acquire acpi_scan_lock safely (most importantly system suspend and hibernation). Apart from that, acpi_scan_lock is platform-specific and device_hotplug_lock is general, so the new ordering appears to be more appropriate from the overall design viewpoint. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-08-30Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues
2013-08-30Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result
2013-08-29Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
2013-08-29PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when availableNeil Horman
This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29ACPI / hotplug: Remove containers synchronouslyRafael J. Wysocki
The current protocol for handling hot remove of containers is very fragile and causes acpi_eject_store() to acquire acpi_scan_lock which may deadlock with the removal of the device that it is called for (the reason is that device sysfs attributes cannot be removed while their callbacks are being executed and ACPI device objects are removed under acpi_scan_lock). The problem is related to the fact that containers are handled by acpi_bus_device_eject() in a special way, which is to emit an offline uevent instead of just removing the container. Then, user space is expected to handle that uevent and use the container's "eject" attribute to actually remove it. That is fragile, because user space may fail to complete the ejection (for example, by not using the container's "eject" attribute at all) leaving the BIOS kind of in a limbo. Moreover, if the eject event is not signaled for a container itself, but for its parent device object (or generally, for an ancestor above it in the ACPI namespace), the container will be removed straight away without doing that whole dance. For this reason, modify acpi_bus_device_eject() to remove containers synchronously like any other objects (user space will get its uevent anyway in case it does some other things in response to it) and remove the eject_pending ACPI device flag that is not used any more. This way acpi_eject_store() doesn't have a reason to acquire acpi_scan_lock any more and one possible deadlock scenario goes away (plus the code is simplified a bit). Reported-and-tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-08-28ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDTLan Tianyu
The ECDT of ASUSTEK L4R doesn't provide correct command and data I/O ports. The DSDT provides the correct information instead. For this reason, add this machine to quirk list for ECDT validation and use the EC information from the DSDT. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=60765 Reported-and-tested-by: Daniele Esposti <expo@expobrain.net> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-28ACPI / thermal: Add check of "_TZD" availability and evaluating resultLan Tianyu
Some machines don't provide _TZD, so check the availability of it before carrying out futher operations. If _TZD is present, also check the result of its evaluation. [rjw: Changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-27Merge branch 'acpi-video'Rafael J. Wysocki
* acpi-video: ACPI: blacklist win8 OSI for buggy laptops ACPI: blacklist win8 OSI for ASUS Zenbook Prime UX31A ACPI / video: drop unused fields from struct acpi_video_brightness_flags ACPI / video: remove unnecessary type casting ACPI / video: trivial style cleanups ACPI / video: trivial costmetic cleanups Conflicts: drivers/acpi/video.c
2013-08-27Merge branch 'acpi-processor'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Acquire writer lock to update CPU maps ACPI / processor: Remove acpi_processor_get_limit_info()
2013-08-27Merge branch 'acpi-bind'Rafael J. Wysocki
* acpi-bind: ACPI: Print diagnostic messages if device links cannot be created ACPI: Drop unnecessary label from acpi_bind_one() ACPI: Clean up error code path in acpi_unbind_one() ACPI: Use list_for_each_entry() in acpi_unbind_one() ACPI: acpi_bind_one()/acpi_unbind_one() whitespace cleanups ACPI: Create symlinks in acpi_bind_one() under physical_node_lock ACPI: Reduce acpi_bind_one()/acpi_unbind_one() code duplication ACPI: Do not fail acpi_bind_one() if device is already bound correctly
2013-08-27Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface
2013-08-27Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20130725. ACPICA: Update names for walk_namespace callbacks to clarify usage. ACPICA: Return error if DerefOf resolves to a null package element. ACPICA: Make ACPI Power Management Timer (PM Timer) optional. ACPICA: Fix divergences of the commit - ACPICA: Expose OSI version. ACPICA: Fix possible fault for methods that optionally have no return value. ACPICA: DeRefOf operator: Update to fully resolve FieldUnit and BufferField refs. ACPICA: Emit all unresolved method externals in a text block ACPICA: Export acpi_tb_validate_rsdp(). ACPI: Add facility to remove all _OSI strings ACPI: Add facility to disable all _OSI OS vendor strings ACPICA: Add acpi_update_interfaces() public interface ACPICA: Update version to 20130626 ACPICA: Fix compiler warnings for casting issues (only some compilers) ACPICA: Remove restriction of 256 maximum GPEs in any GPE block ACPICA: Disassembler: Expand maximum output string length to 64K ACPICA: TableManager: Export acpi_tb_scan_memory_for_rsdp() ACPICA: Update comments about behavior when _STA does not exist
2013-08-27Merge branch 'acpi-sleep'Rafael J. Wysocki
* acpi-sleep: x86 / tboot / ACPI: Fail extended mode reduced hardware sleep xen / ACPI: notify xen when reduced hardware sleep is available ACPI / sleep: Introduce acpi_os_prepare_extended_sleep() for extended sleep path
2013-08-27Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI / PM: Add state information to error message in acpi_device_set_power() ACPI / PM: Remove redundant power manageable check from acpi_bus_set_power() ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhere ACPI / PM: Make messages in acpi_device_set_power() print device names ACPI / PM: Only set power states of devices that are power manageable
2013-08-27Merge branch 'acpi-pci-hotplug'Rafael J. Wysocki
* acpi-pci-hotplug: (34 commits) ACPI / PM: Hold acpi_scan_lock over system PM transitions ACPI / hotplug / PCI: Fix NULL pointer dereference in cleanup_bridge() PCI / ACPI: Use dev_dbg() instead of dev_info() in acpi_pci_set_power_state() ACPI / hotplug / PCI: Get rid of check_sub_bridges() ACPI / hotplug / PCI: Clean up bridge_mutex usage ACPI / hotplug / PCI: Redefine enable_device() and disable_device() ACPI / hotplug / PCI: Sanitize acpiphp_get_(latch)|(adapter)_status() ACPI / hotplug / PCI: Get rid of unused constants in acpiphp.h ACPI / hotplug / PCI: Check for new devices on enabled slots ACPI / hotplug / PCI: Allow slots without new devices to be rescanned ACPI / hotplug / PCI: Do not check SLOT_ENABLED in enable_device() ACPI / hotplug / PCI: Do not exectute _PS0 and _PS3 directly ACPI / hotplug / PCI: Do not queue up event handling work items in vain ACPI / hotplug / PCI: Consolidate slot disabling and ejecting ACPI / hotplug / PCI: Drop redundant checks from check_hotplug_bridge() ACPI / hotplug / PCI: Rework namespace scanning and trimming routines ACPI / hotplug / PCI: Store parent in functions and bus in slots ACPI / hotplug / PCI: Drop handle field from struct acpiphp_bridge ACPI / hotplug / PCI: Drop handle field from struct acpiphp_func ACPI / hotplug / PCI: Embed function struct into struct acpiphp_context ...
2013-08-27Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (21 commits) ACPI / dock: fix error return code in dock_add() ACPI / dock: Drop unnecessary local variable from dock_add() ACPI / dock / PCI: Drop ACPI dock notifier chain ACPI / dock: Do not check CONFIG_ACPI_DOCK_MODULE ACPI / dock: Do not leak memory on falilures to add a dock station ACPI: Drop ACPI bus notifier call chain ACPI / dock: Rework the handling of notifications ACPI / dock: Simplify dock_init_hotplug() and dock_release_hotplug() ACPI / dock: Walk list in reverse order during removal of devices ACPI / dock: Rework and simplify find_dock_devices() ACPI / dock: Drop the hp_lock mutex from struct dock_station ACPI: simplify acpiphp driver with new helper functions ACPI: simplify dock driver with new helper functions ACPI: Export acpi_(bay)|(dock)_match() from scan.c ACPI: introduce two helper functions for _EJ0 and _LCK ACPI: introduce helper function acpi_execute_simple_method() ACPI: introduce helper function acpi_has_method() ACPI / dock: simplify dock_create_acpi_device() ACPI / dock: mark initialization functions with __init ACPI / dock: drop redundant spin lock in dock station object ...
2013-08-25ACPI: blacklist win8 OSI for buggy laptopsFelipe Contreras
Since v3.7 the acpi backlight driver doesn't work correctly in several machines because ACPI code has different code for Windows 8, and the rest. The commit ea45ea7 (in v3.11-rc2) tried to fix this problem by using the intel backlight driver, however it introduced several other issues in different machines. This patch fixes both regressions by blacklisting the win8 OSI, so we are back to v3.6 behavior, and it should remain that way until the intel backlight driver is fixed. Since v3.7, users have been forced to fix the initial regression by modifying the boot arguments (acpi_osi="!Windows 2012"). Once the Intel backlight driver works correctly for all machines, this blacklist can be removed and that driver can be used instead. References: https://bugzilla.kernel.org/show_bug.cgi?id=60682 Reported-by: Danny Baumann <dannybaumann@web.de> Reported-by: Philipp Richter <richterphilipp.pops@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-23i2c: move ACPI helpers into the coreMika Westerberg
This follows what has already been done for the DeviceTree helpers. Move the ACPI helpers from drivers/acpi/acpi_i2c.c to the I2C core and update documentation accordingly. This also solves a problem reported by Jerry Snitselaar that we can't build the ACPI I2C helpers as a module. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-22Revert "ACPI / video: Always call acpi_video_init_brightness() on init"Rafael J. Wysocki
Revert commit c04c697 (ACPI / video: Always call acpi_video_init_brightness() on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3 for Trevor Bortins. References: https://bugs.freedesktop.org/show_bug.cgi?id=68355 Reported-and-bisected-by: Trevor Bortins <enabfluw@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-22acpi: bgrt: fix build error due to attribute changeGreg Kroah-Hartman
No need to call sysfs_bin_attr_init, as the attribute is not dynamically created. Also, we renamed the attribute, so this one isn't even valid anymore. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21ACPI: bgrt: take advantage of binary sysfs groupsGreg KH
Attribute groups now can handle binary sysfs attributes, so clean up the code here by using a binary attribute array. This saves us the extra call to create the binary attribute at saves 6 lines overall. Cc: Len Brown <lenb@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- I can take this in my driver-core tree if someone from ACPI acks it, otherwise, feel free to take it through the ACPI trees instead, just let me know. drivers/acpi/bgrt.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-)
2013-08-21ACPI / PM: Hold acpi_scan_lock over system PM transitionsRafael J. Wysocki
Bad things happen if ACPI hotplug events are handled during system PM transitions, especially if devices are removed as a result. To prevent those bad things from happening, acquire acpi_scan_lock when a PM transition is started and release it when that transition is complete or has been aborted. This fixes resume lockup on my test-bed Acer Aspire S5 that happens when Thunderbolt devices are disconnected from the machine while suspended. Also fixes the analogous problem for Mika Westerberg on an Intel DZ77RE-75K board. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-08-19erst: Read and write to the 'compressed' flag of pstoreAruna Balakrishnaiah
In pstore write, set the section type to CPER_SECTION_TYPE_DMESG_COMPR if the data is compressed. In pstore read, read the section type and update the 'compressed' flag accordingly. Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-08-19pstore: Introduce new argument 'compressed' in the read callbackAruna Balakrishnaiah
Backends will set the flag 'compressed' after reading the log from persistent store to indicate the data being returned to pstore is compressed or not. Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-08-19pstore: Add new argument 'compressed' in pstore write callbackAruna Balakrishnaiah
Addition of new argument 'compressed' in the write call back will help the backend to know if the data passed from pstore is compressed or not (In case where compression fails.). If compressed, the backend can add a tag indicating the data is compressed while writing to persistent store. Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-08-19acpi/apei/erst: Add missing iounmap() on error in erst_exec_move_data()Wei Yongjun
Add the missing iounmap() before return from erst_exec_move_data() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-08-14ACPI / osl: Kill macro INVALID_TABLE().Tang Chen
The macro INVALID_TABLE() is defined like this: #define INVALID_TABLE(x, path, name) \ { pr_err("ACPI OVERRIDE: " x " [%s%s]\n", path, name); continue; } And it is used like this: for (...) { ... if (...) INVALID_TABLE() ... } The "continue" in the macro makes the code hard to understand. And also, this macro is only used several times in a single file. As suggested by Joe Perches <joe@perches.com>, we can remote it and use pr_err directly. So after this patch, this macro is removed, and pr_err() is used like this: for (...) { ... if (...) { pr_err("ACPI OVERRIDE: ......"); continue; } ... } Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Suggested-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace numberLan Tianyu
It's unreadable to pass "-1" as trip parameter directly to thermal_zone_bind_cooling_device(). Use THERMAL_TRIPS_NONE instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14ACPI / thermal: Remove unused macros in the driver/acpi/thermal.cLan Tianyu
The ACPI_THERMAL_FILE* macros are not used now, so remove them. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>