aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2012-11-08drbd: Renamed (old|new)_conf into (old|new)_net_conf in receive_SyncParamPhilipp Reisner
Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Split drbd_alter_sa() into drbd_sync_after_valid() and ↵Philipp Reisner
drbd_sync_after_changed() Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_dew_dev_size() gets the user requests disk_size as argumentPhilipp Reisner
Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Renamed the net_conf_update mutex to conf_updatePhilipp Reisner
Preparing to use the same mutex for disk_conf updates Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed dead codePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.hAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix schedule in atomicLars Ellenberg
An administrative detach used to request a state change directly to D_DISKLESS, first suspending IO to avoid the last put_ldev() occuring from an endio handler, potentially in irq context. This is not enough on the receiving side (typically secondary), we may miss some peer_req on the way to local disk, which then may do the last put_ldev() from their drbd_peer_request_endio(). This patch makes the detach always go through the intermediate D_FAILED state. We may consider to rename it D_DETACHING. Alternative approach would be to create yet an other work item to be scheduled on the worker, do the destructor work from there, and get the timing right. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix thread stop deadlockLars Ellenberg
There are races where the receiver may be exiting, but still need the worker to process some stuff. Do not wait for the receiver to die from an exiting worker. The receiver must already be dead in case the worker decides to exit. If the receiver was still alive, it may still want to queue work, and do drbd_flush_workqueue() from it's disconnect cleanup code, which would no longer be processed by an exiting worker. This also would deadlock, if the worker was to synchornously wait for the receiver to die. Do not implicitly stop the worker. The worker will only be stopped from configuration context, from conn_reconfig_done(), drbd_adm_down() or drbd_adm_delete_connection(), after making sure the receiver is already stopped. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix race when forcefully disconnectingLars Ellenberg
If a forced disconnect hits a restarting receiver right after it passed its final "if (C_DISCONNECTING)" test in drbdd_init(), but before it was actually restarted by drbd_thread_setup, we could be left with a connection stuck in C_DISCONNECTING, never reaching C_STANDALONE, which would be necessary to take it down or reconfigure it. Move the last cleanup into w_after_conn_state_ch(), and do an additional state change request in conn_try_disconnect(), just in case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allow to change data-integrity-alg on the flyAndreas Gruenbacher
The main purpose of this is to allow to turn data integrity checking on and off on demand without causing interruptions. Implemented by allocating tconn->peer_integrity_tfm only when receiving a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in worker context, and no further synchronization is necessary. On the sender side, tconn->integrity_tfm is modified under tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All accesses to tconn->integrity_tfm already happen under this mutex. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce a "lockless" variant of drbd_send_protocoll()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove obsolete drbd_crypto_is_hash()Andreas Gruenbacher
We allocate hash transformations with crypto_alloc_hash() which will only return hash algorithms. It is not necessary to reconfirm that we actually got a hash algorithm. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_r_tfm -> peer_integrity_tfmAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_w_tfm -> integrity_tfmAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Wrong use of RCU in receive_protocol()Andreas Gruenbacher
It is not enough to grab net_conf->integrity_alg under rcu_read_lock() and access it outside of it; the entire net_conf object may be gone by then. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix copy/paste error in commentLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rename variable sc to res_optsLars Ellenberg
sc was short for syncer conf, which does not exist anymore anyways. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rename variable ndc to new_disk_confLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: on reconfiguration requests, mind the SET_DEFAULTS flagLars Ellenberg
The DRBD_GENL_F_SET_DEFAULTS flag was ignored for drbd_adm_disk_opts() and drbd_adm_net_opts(). Factor out drbd_set_*_defaults() helper functions, and call them appropriately. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Consider all crypto options in connect and in net-optionsPhilipp Reisner
So for this was simply not considered after the options have been re-arranged. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix various disconnecting racesLars Ellenberg
If an admin requests disconnect at a time when the state handling already disconnects/reconnects, there have been some races. Make sure to always really stop the network threads before returning success for disconnect. Do not pretend successfull forced disconnect, if the state handling returned an error. Return success from drbd_adm_down() only after all threads are finished. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: remove useless kobject_uevent from drbd_adm_connectLars Ellenberg
Calling kobject_uevent, which may sleep, from within rcu_read_lock() protected regions is not possible. This particular kobject_uevent also is also wrong. It was supposed to trigger a udev run, just in case something relevant to udev symlink magic has changed, when adjusting runtime re-configurable settings while we still had the "syncer conf". It was improperly placed in connect when we dropped the "syncer conf". The right thing to do is probably to call "udevadm trigger" directly in those cases where drbdadm thinks there was a need to trigger extra udev runs. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed the OBJECT_DYING and the CONFIG_PENDING bitsPhilipp Reisner
superseded by refcounting Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Take a reference on tconn when finding a tconn by namePhilipp Reisner
Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Basic refcounting for drbd_tconnPhilipp Reisner
References hold by: * Each (running) drbd thread has a reference on tconn * Each mdev has a referenc on tconn * Beeing in the all_tconn list counts for one reference * Each after_conn_state_chg_work has a reference to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Eliminated drbd_free_resoruces() it is superseeded by conn_free_crypto()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: move comment about stopping the receiver thread to where it belongsLars Ellenberg
When the last volume of a replication group is unconfigured, the worker thread exits. To not interfere with cleanup of other threads, before the the last cleanups run, we need to make sure the receiver has already exited. The commend explaining that clearly belongs above drbd_thread_stop(&tconn->receiver), not in the cleanup loop below. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: cmdname() enum to string convertion was missing a few constantsLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix setsockopt for user mode linuxLars Ellenberg
We use our own copy of kernel_setsockopt, and did not mess around with get_fs/set_fs, since we thought we knew we would always be KERNEL_DS anyways. Apparently not so for at least user mode linux, so put the set_fs(KERNEL_DS) in there. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: allow status dump request all volumes of a specific resourceLars Ellenberg
We had drbd_adm_get_status (one single volume), and drbd_adm_get_status_all (dump of all volumes of all resources). This enhances the latter to be able to dump all volumes of just one specific resource. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Considering that the two_primaries config flag can changePhilipp Reisner
Now since it is possible to change the two_primaries config flag while the connection is up, make sure we treat a peer_req in a consistent way if the config flag changes while the peer_req is under IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Proper locking for updates to net_conf under RCUPhilipp Reisner
Removing the get_net_conf()/put_net_conf() functions Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rcu_read_lock() and rcu_dereference() for tconn->net_confPhilipp Reisner
Removing the get_net_conf()/put_net_conf() calls Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allow online change of replication protocol only with agreed_pv >= 100Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Check consistency of net options when the get changed onlinePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Runtime changeable wire protocolPhilipp Reisner
The wire protocol is no longer a property that is negotiated between the two peers. It is now expressed with two bits (DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data packet. Therefore the primary node is free to change the wire protocol at any time without disconnect/reconnect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: protect all idr accesses that might sleep with drbd_cfg_rwsemPhilipp Reisner
With this commit the locking for all accesses to IDRs is complete: * Non sleeping read accesses are protected by RCU * sleeping read accesses are protocted by a read lock on drbd_cfg_rwsem * accesses that add anything are protected by a write lock * accesses that remove an object are protoected by a write lock and a call to synchronize_rcu() after it is removed from the IDR and before the object is actually free()ed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Converted drbd_cfg_mutex into drbd_cfg_rwsemPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rcu_read_[un]lock() for all idr accesses that do not sleepPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Inlined drbd_free_mdev(); it got called only from one placePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_delete_device() takes a struct drbd_conf * nowPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_pp_free() to drbd_free_pages()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_pp_alloc() to drbd_alloc_pages() and make it non-staticAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_pp_first_pages_or_try_alloc() to __drbd_alloc_pages()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make drbd_wait_ee_list_empty() and _drbd_wait_ee_list_empty() staticAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_{ ee -> peer_req }_has_active_pageAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename reclaim_net_ee(), drbd_process_done_ee(), ↵Andreas Gruenbacher
drbd_process_done_ee(), tconn_process_done_ee() to *_peer_reqs Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_release_ee() to drbd_free_peer_reqs()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_free_ee() and variants to *_peer_req()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_alloc_ee() to drbd_alloc_peer_req()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>