aboutsummaryrefslogtreecommitdiff
path: root/drivers/bluetooth/hci_qca.c
AgeCommit message (Collapse)Author
2019-08-14Bluetooth: hci_qca: Skip 1 error print in device_want_to_sleep()Rocky Liao
Don't fall through to print error message when receive sleep indication in HCI_IBS_RX_ASLEEP state, this is allowed behavior. Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: hci_qca: Send VS pre shutdown command.Harish Bandi
WCN399x chips are coex chips, it needs a VS pre shutdown command while turning off the BT. So that chip can inform BT is OFF to other active clients. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: hci_qca: Use kfree_skb() instead of kfree()Wei Yongjun
Use kfree_skb() instead of kfree() to free sk_buff. Fixes: 2faa3f15fa2f ("Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-31Bluetooth: hci_uart: check for missing tty operationsVladis Dronov
Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset() functions which are called by the certain HCI UART protocols (hci_ath, hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control() or directly. This leads to an execution at NULL and can be triggered by an unprivileged user. Fix this by adding a helper function and a check for the missing tty operations in the protocols code. This fixes CVE-2019-10207. The Fixes: lines list commits where calls to tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART protocols. Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.36+ Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Yu-Chen, Cho <acho@suse.com> Tested-by: Yu-Chen, Cho <acho@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-06Bluetooth: hci_qca: Load customized NVM based on the device propertyRocky Liao
QCA BTSOC NVM is a customized firmware file and different vendors may want to have different BTSOC configuration (e.g. Configure SCO over PCM or I2S, Setting Tx power, etc.) via this file. This patch will allow vendors to download different NVM firmware file by reading a device property "firmware-name". Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor eventMatthias Kaehlcke
Firmware download to the WCN3990 often fails with a 'TLV response size mismatch' error: [ 133.064659] Bluetooth: hci0: setting up wcn3990 [ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201 [ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch [ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84) This is caused by a vendor event that corresponds to an earlier command to change the baudrate. The event is not processed in the context of the baudrate change and is later interpreted as response to the firmware download command (which is also a vendor command), but the driver detects that the event doesn't have the expected amount of associated data. More details: For the WCN3990 the vendor command for a baudrate change isn't sent as synchronous HCI command, because the controller sends the corresponding vendor event with the new baudrate. The event is received and decoded after the baudrate change of the host port. Identify the 'unused' event when it is received and don't add it to the queue of RX frames. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>Matthias Kaehlcke
Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IBS_ENABLED. The constant represents a flag (multiple flags can be set at once), not a unique state of the controller or driver. Also make the flag an enum value instead of a pre-processor constant (more flags will be added to the enum group by another patch). Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-03Bluetooth: hci_qca: Added support for WCN3998Harish Bandi
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible. Changed driver code to support WCN3998 Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Fix crash with non-serdev devicesMatthias Kaehlcke
qca_set_baudrate() calls serdev_device_wait_until_sent() assuming that the HCI is always associated with a serdev device. This isn't true for ROME controllers instantiated through ldisc, where the call causes a crash due to a NULL pointer dereferentiation. Only call the function when we have a serdev device. The timeout for ROME devices at the end of qca_set_baudrate() is long enough to be reasonably sure that the command was sent. Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reported-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Rocky Liao <rjliao@codeaurora.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Give enough time to ROME controller to bootup.Balakrishna Godavarthi
This patch enables enough time to ROME controller to bootup after we bring the enable pin out of reset. Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support"). Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Add helper function to get the chip familyMatthias Kaehlcke
Many functions obtain a 'struct qca_serdev' only to read the btsoc_type field. Add a helper function that encapsulates this. This also fixes crashes observed on platforms with ROME controllers that are instantiated through ldisc and not as serdev clients. The crashes are caused by NULL pointer dereferentiations, which stem from the driver's assumption that a QCA HCI device is always associated with a serdev device. Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-03-02Bluetooth: hci_qca: Reduce delay after sending baudrate request for WCN3990Matthias Kaehlcke
The current 300ms delay after a baudrate change is extremely long. For WCN3990 it is sufficient to wait 10ms after the baudrate change request has been sent over the wire. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: hci_qca: Use msleep() instead of open coding itMatthias Kaehlcke
Call msleep() in qca_set_baudrate() instead of reimplementing it. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: hci_qca: Add delay after power-off pulseMatthias Kaehlcke
During initialization the power-on pulse is currently sent inmediately after the prior power-off pulse. With this initialization often fails at boot time: [ 15.205224] Bluetooth: hci0: setting up wcn3990 [ 17.341062] Bluetooth: hci0: command 0xfc00 tx timeout [ 22.101453] ERROR: Bluetooth initialization failed [ 25.337740] Bluetooth: hci0: Reading QCA version information failed (-110) After a power-off pulse wait 10ms to give the controller time to power off. Remove the previous short settling delay, it isn't needed anymore. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()Matthias Kaehlcke
After sending a power on pulse the driver has a delay of 100ms to allow the host controller to boot. Move the delay into qca_send_power_pulse(), since it is directly related with the power-on pulse. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()Matthias Kaehlcke
There are only two types of power pulses 'on' or 'off', pass a boolean instead of the power pulse 'command'. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990Matthias Kaehlcke
Set quirk for wcn3990 to read BD_ADDR from a firmware node property. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: Disable IBS state machine and flush Tx bufferBalakrishna Godavarthi
During hci down we observed IBS sleep commands are queued in the Tx buffer and hci_uart_write_work is sending data to the chip which is not required as the chip is powered off. This patch will disable IBS and flush the Tx buffer before we turn off the chip. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: Deassert RTS while baudrate change commandBalakrishna Godavarthi
This patch will help to stop frame reassembly errors while changing the baudrate. This is because host send a change baudrate request command to the chip with 115200 bps, Whereas chip will change their UART clocks to the enable for new baudrate and sends the response for the change request command with newer baudrate, On host side we are still operating in 115200 bps which results of reading garbage data. Here we are pulling RTS line, so that chip we will wait to send data to host until host change its baudrate. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: use wait_until_sent() for power pulsesBalakrishna Godavarthi
wcn3990 requires a power pulse to turn ON/OFF along with regulators. Sometimes we are observing the power pulses are sent out with some time delay, due to queuing these commands. This is causing synchronization issues with chip, which intern delay the chip setup or may end up with communication issues. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-01-22Bluetooth: hci_qca: Add helper to set device addressBalakrishna Godavarthi
This patch add qca_set_bdaddr() to set the device address for latest Qualcomm Bluetooth chipset wcn3990 and above. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-18Bluetooth: hci_qca: Add support for controller debug logs.Balakrishna Godavarthi
This patch will prevent error messages splashing on console. [ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 QCA wcn3990 will send the debug logs in the form of ACL packets. While decoding packet in qca_recv(), marking the received debug log packet as diagnostic packet. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05treewide: Replace more open-coded allocation size multiplicationsKees Cook
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-09-27Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990Balakrishna Godavarthi
This patch enables power off support for hci down and power on support for hci up. As wcn3990 power sources are ignited by regulators, we will turn off them during hci down, i.e. an complete power off of wcn3990. So while hci up, will call vendor setup which will turn on the regulators, requests BT chip version and download the firmware. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove hdev dereference in qca_close().Balakrishna Godavarthi
When flag KASAN is set, we are seeing an following crash while removing hci_uart module. [ 50.589909] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b73 [ 50.597902] Mem abort info: [ 50.600846] Exception class = DABT (current EL), IL = 32 bits [ 50.606959] SET = 0, FnV = 0 [ 50.610142] EA = 0, S1PTW = 0 [ 50.613396] Data abort info: [ 50.616401] ISV = 0, ISS = 0x00000004 [ 50.620373] CM = 0, WnR = 0 [ 50.623466] [006b6b6b6b6b6b73] address between user and kernel address ranges [ 50.630818] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 50.671670] PC is at qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.677593] LR is at qca_close+0x74/0xb0 [hci_uart] [ 50.775689] Process rmmod (pid: 2144, stack limit = 0xffffff801ba90000) [ 50.782493] Call trace: [ 50.872150] [<ffffff8000c3c81c>] qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.879138] [<ffffff8000c3c968>] qca_close+0x74/0xb0 [hci_uart] [ 50.885238] [<ffffff8000c3a71c>] hci_uart_unregister_device+0x44/0x50 [hci_uart] [ 50.892846] [<ffffff8000c3c9f4>] qca_serdev_remove+0x50/0x5c [hci_uart] [ 50.899654] [<ffffff800844f630>] serdev_drv_remove+0x28/0x38 [ 50.905489] [<ffffff800850fc44>] device_release_driver_internal+0x140/0x1e4 [ 50.912653] [<ffffff800850fd94>] driver_detach+0x78/0x84 [ 50.918121] [<ffffff800850edac>] bus_remove_driver+0x80/0xa8 [ 50.923942] [<ffffff80085107dc>] driver_unregister+0x4c/0x58 [ 50.929768] [<ffffff8000c3ca8c>] qca_deinit+0x24/0x598 [hci_uart] [ 50.936045] [<ffffff8000c3ca10>] hci_uart_exit+0x10/0x48 [hci_uart] [ 50.942495] [<ffffff8008136630>] SyS_delete_module+0x17c/0x224 This crash is due to dereference of hdev, after freeing it. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove serdev_device_open/close function callsBalakrishna Godavarthi
Removed serdev_device_open/close functions from qca_open/close as they are called in hci_uart_register_device() and hci_uart_unregister_device() functions. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990Balakrishna Godavarthi
Add support to set voltage/current of various regulators to power up/down Bluetooth chip wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.Balakrishna Godavarthi
Enable Qualcomm chips to operate at 3.2Mbps. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add wrapper functions for setting UART speedBalakrishna Godavarthi
In function qca_setup, we set initial and operating speeds for Qualcomm Bluetooth SoC's. This block of code is common across different Qualcomm Bluetooth SoC's. Instead of duplicating the code, created a wrapper function to set the speeds. So that future coming SoC's can use these wrapper functions to set speeds. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Redefine qca_uart_setup() to generic function.Balakrishna Godavarthi
Redefinition of qca_uart_setup will help future Qualcomm Bluetooth SoC, to use the same function instead of duplicating the function. Added new arguments soc_type and soc_ver to the functions. These arguments will help to decide type of firmware files to be loaded into Bluetooth chip. soc_type holds the Bluetooth chip connected to APPS processor. soc_ver holds the Bluetooth chip version. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Rename ROME specific functions to generic functionsBalakrishna Godavarthi
Some of the QCA BTSoC ROME functions, are used for different versions or different make of BTSoC's. Instead of duplicating the same functions for new chip, update names of the functions that are used for both chips to keep this generic and would help in future when we would have new BT SoC. To have generic text in logs updated from ROME to QCA where ever possible. This avoids confusion to user, when using the future Qualcomm Bluetooth SoC's. Updated BT_DBG, BT_ERR and BT_INFO with bt_dev_dbg, bt_dev_err and bt_dev_info where ever applicable. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-23bluetooth: hci_qca: Replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai
qca_open() and qca_set_baudrate() are never called in atomic context. They call kzalloc() and bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-30Bluetooth: hci_qca: Fix "Sleep inside atomic section" warningThierry Escande
This patch fixes the following warning during boot: do not call blocking ops when !TASK_RUNNING; state=1 set at [<(ptrval)>] qca_setup+0x194/0x750 [hci_uart] WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135 __might_sleep+0x7c/0x88 In qca_set_baudrate(), the current task state is set to TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then restored to TASK_INTERRUPTIBLE. This patch sets the current task state back to TASK_RUNNING instead. Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: hci_qca: Add serdev supportThierry Escande
Add support for Qualcomm serial slave devices. Probe the serial device, retrieve its maximum speed and register a new hci uart device. Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loaderAmit Pundir
AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain <loic.poulain@linaro.org> CC: Nicolas Dechesne <nicolas.dechesne@linaro.org> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13Bluetooth: hci_qca: Avoid setup failure on missing rampatchLoic Poulain
Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-30Bluetooth: Use bt_dev_err and bt_dev_info when possibleMarcel Holtmann
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and bt_dev_info when possible. This allows for controller specific reporting. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-10-06Bluetooth: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. As already done in hci_qca, add struct hci_uart pointer to priv structure. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-16networking: add and use skb_put_u8()Johannes Berg
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-18Bluetooth: hci_qca: fix spelling mistake: "Spurrious" -> "Spurious"Colin Ian King
trivial fix to spelling mistake in error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-27Bluetooth: hci_qca: Use setup_timer Kernel API instead of init_timerPrasanna Karthik
Replace init_timer function with setup_timer reported by coccinelle Signed-off-by: Prasanna Karthik <pkarthik@intrinsyc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "workqueue" queues multiple work items viz &qca->ws_awake_rx &qca->ws_rx_vote_off, &qca->ws_awake_device, &qca->ws_tx_vote_off which require strict execution ordering. Hence, an ordered dedicated workqueue has been used to replace the deprecated create_singlethread_workqueue instance. WQ_MEM_RECLAIM has not been set since the driver is not being used on a memory reclaim path. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Use new hci_skb_pkt_* wrappers for driversMarcel Holtmann
The new hci_skb_pkt_* wrappers are mainly intented for drivers to require less knowledge about bt_cb(sbk) handling. So after converting the core packet handling, convert all drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-04Merge tag 'driver-core-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-10-21Bluetooth: hci_uart: Provide initial manufacturer informationMarcel Holtmann
Provide an early indication about the manufacturer information so that it can be forwarded into monitor channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-04debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 23:09:46 +0000