aboutsummaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)Author
2021-08-19Bluetooth: btusb: Remove WAKEUP_DISABLE and add WAKEUP_AUTOSUSPEND for ↵Max Chou
Realtek devices For the commit of 9e45524a011107a73bc2cdde8370c61e82e93a4d, wakeup is always disabled for Realtek devices. However, there's the capability for Realtek devices to apply USB wakeup. In this commit, remove WAKEUP_DISABLE feature for Realtek devices. If users would switch wakeup, they should access "/sys/bus/usb/.../power/wakeup" In this commit, it also adds the feature as WAKEUP_AUTOSUSPEND for Realtek devices because it should set do_remote_wakeup on autosuspend. Signed-off-by: Max Chou <max.chou@realtek.com> Tested-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-16Bluetooth: btbcm: add patch ram for bluetoothAngus Ainslie
Bluetooth on the BCM43752 needs a patchram file to function correctly. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-10Bluetooth: btusb: check conditions before enabling USB ALT 3 for WBSPauli Virtanen
Some USB BT adapters don't satisfy the MTU requirement mentioned in commit e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS") and have ALT 3 setting that produces no/garbled audio. Some adapters with larger MTU were also reported to have problems with ALT 3. Add a flag and check it and MTU before selecting ALT 3, falling back to ALT 1. Enable the flag for Realtek, restoring the previous behavior for non-Realtek devices. Tested with USB adapters (mtu<72, no/garbled sound with ALT3, ALT1 works) BCM20702A1 0b05:17cb, CSR8510A10 0a12:0001, and (mtu>=72, ALT3 works) RTL8761BU 0bda:8771, Intel AX200 8087:0029 (after disabling ALT6). Also got reports for (mtu>=72, ALT 3 reported to produce bad audio) Intel 8087:0a2b. Signed-off-by: Pauli Virtanen <pav@iki.fi> Fixes: e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS") Tested-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Jonathan Lampérth <jon@h4n.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-06Bluetooth: btusb: Fix fall-through warningsmark-yw.chen
Fix fall-through warnings: drivers/bluetooth/btusb.c: In function ‘btusb_recv_acl_mtk’: drivers/bluetooth/btusb.c:4033:3: warning: this statement may fall through [-Wimplicit-fallthrough=] 4033 | usb_disable_autosuspend(data->udev); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btusb.c:4034:2: note: here 4034 | case 0x05ff: /* Firmware debug logging 1 */ | ^~~~ Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Combine setting up MSFT extensionTedd Ho-Jeong An
This patch combines the setting up MSFT extension for the legacy and TLV based bootloader into the common function based on hw_variant. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Fix the legacy bootloader returns tlv based versionTedd Ho-Jeong An
From the ThP, it supports both legacy and TLV based HCI_Intel_Read_Version command after downloading the operational firmware, and it causes the driver to choose the wrong setup routines and missing firmware/ddc file. So, as a workaround, this patch checks the fw variant from the TLV based version, and if the device is legacy bootloader device, the legacy HCI_Intel_Read_Version command is used to get the legacy version information and run the legacy bootloader setup with it. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Clean the exported function to staticTedd Ho-Jeong An
This patch changes the exported functions to static if they are no longer used by others. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Move hci quirks to setup routineTedd Ho-Jeong An
This patch moves the hci quirks for Intel devices into the setup routines and cleaned up the driver flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Refactoring setup routine for bootloader devicesTedd Ho-Jeong An
This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add combined set_diag functionsTedd Ho-Jeong An
This patch adds a combined set_diag functions. It also changes the btintel_set_diag_mfg() to static since it is no longer used by others. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Fix the LED is not turning off immediatelyTedd Ho-Jeong An
Some platforms have an issue with BT LED when the interface is down or BT radio is turned off, which takes 5 seconds to BT LED goes off. This command turns off the BT LED immediately. This patch sends the Intel vendor command to turn off the LED. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Fix the first HCI command not work with ROM deviceTedd Ho-Jeong An
The some legacy ROM controllers have a bug with the first HCI command sent to it returning number of completed commands as zero, which would stall the command processing in the Bluetooth core. As a workaround, send HCI Rest command first which will reset the controller to fix the issue. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add btintel data structTedd Ho-Jeong An
This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Refactoring setup routine for legacy ROM skuTedd Ho-Jeong An
This patch refactors the setup routines for legacy ROM product into combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add combined setup and shutdown functionsTedd Ho-Jeong An
There are multiple setup and shutdown functions for Intel device and the setup function to be used is depends on the USB PID/VID, which makes difficult to maintain the code and increases the code size. This patch adds combined setup and shutdown functions to provide a single entry point for all Intel devices and choose the setup functions based on the information read with HCI_Intel_Read_Version command. Starting from TyP device, the command and response parameters for HCI_Intel_Read_Version command are changed even though OCF remains same. However, the legacy devices still can handle the command without error even if it has a extra parameter, so to simplify the flow, the new command format is used to read the version information for both legacy and new (tlv based) format. Also, it also adds a routine to setup the hdev callbacks in btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-04Bluetooth: Add additional Bluetooth part for Realtek 8852AELarry Finger
This Realtek device has both wifi and BT components. The latter reports a USB ID of 04ca:4006, which is not in the table. The portion of /sys/kernel/debug/usb/devices pertaining to this device is T: Bus=02 Lev=01 Prnt=01 Port=12 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4006 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-04Bluetooth: btusb: Support Bluetooth Reset for Mediatek Chip(MT7921)mark-yw.chen
When the firmware hang or command no response, driver can reset the bluetooth mcu via USB to recovery it. The reset steps as follows. 1. Cancel USB transfer requests before reset. 2. It use speicific USB HW Register to reset Bluetooth MCU, at the same time, the USB Endpoint0 still keep alive. 3. Poll the USB HW register until reset is completed by Endpoint0. 4. To recovery unexpected USB state and behavior during resetting the Bluetooth MCU, the driver need to reset the USB device for MT7921. 5. After the reset is completed, the Bluetooth MCU need to re-setup, such as download patch, power-on sequence and etc. Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Reviewed-by: Michael Sun <michaelfsun@google.com> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-04Bluetooth: btusb: Record debug log for Mediatek Chip.mark-yw.chen
Mediatek Bluetooth controller sends the FW log and FW dump via EP2. This patch creates an MTK specified callback(btusb_recv_acl_mtk) to replace the original one (hci_recv_frame) when an MTK controller is detected. The new callback will separate the firmware dump traffics from the ACL data to have them process separately. 1. Add a new field (recv_acl) to the btusb_data struct to store vendor-specific ACL callback handler. 2. Add the MTK-specific ACL callback handler (btusb_recv_acl_mtk) to process ACL data, debug log, and firmware dump. 3. The debug log traces LMP/LL events and connection quality reports. 4. The upper layer can use hci_channel_monitor to receive these packets. Example btmon: firmware debug log. 1. Enable firmware debug log. < HCI Command: Vendor (0x3f|0x005d) plen 4 00 00 02 02 .... > HCI Event: Command Complete (0x0e) plen 8 Vendor (0x3f|0x005d) ncmd 1 Status: Success (0x00) 00 00 02 02 .... 2. Diagnostic packet from controller = Vendor Diagnostic (len 500) ff 05 f0 01 fd ff 02 0e 08 01 5d fc 00 00 00 02 02 aa aa aa cb e3 f0 15 b0 0c 5f 01 00 d1 0f 33 01 7f 00 08 57 61 0c 00 00 00 00 00 23 37 17 00 fd ff 00 00 29 60 ff ff b1 56 e8 00 57 40 0a 40 39 95 f2 00 47 40 43 00 fc f0 16 00 57 61 0c 00 00 00 00 00 23 37 17 00 fd ff 00 00 29 60 ff ff 65 95 f2 00 57 40 0a 40 ec d3 fc 00 47 40 3b 00 2c f1 17 00 57 61 0c 00 00 00 00 00 23 37 17 00 fd ff 00 00 29 60 ff ff 19 d4 fc 00 57 40 76 1c b2 61 01 01 47 40 b3 04 0b 63 18 00 fe ff 02 01 04 05 33 8b 9e 08 00 aa aa aa aa aa 27 38 01 02 01 00 00 00 02 e0 10 00 20 00 20 00 2a 08 40 00 20 00 20 08 2a 08 02 00 40 00 00 01 2e 08 40 00 01 67 b0 c2 2e 08 3e 07 ff ff ff ff 40 08 01 00 02 00 00 00 34 08 a3 00 00 00 00 00 34 08 a3 00 00 00 00 00 35 08 45 01 00 00 00 00 2e 08 40 00 01 67 b0 c2 30 35 01 02 00 00 00 00 2c 31 01 00 02 00 00 40 2d 19 03 00 00 40 00 00 fd ff 02 0f 04 00 01 01 04 aa aa aa aa aa aa aa 57 61 0c 00 00 00 00 00 23 46 32 00 01 00 00 00 2f 35 00 02 00 00 00 00 29 35 ff 02 00 22 00 00 2d 31 a6 02 02 00 00 00 31 6c 40 00 14 63 18 1b 31 6c 40 00 14 63 18 23 51 08 53 00 12 63 18 00 2c 35 12 01 fe 00 00 00 2b 35 fe 02 02 00 00 00 2f 31 21 00 00 00 02 00 75 61 01 00 4c 1b 93 00 79 61 01 00 00 00 00 00 12 e3 63 18 20 31 86 01 74 61 68 03 00 00 04 00 a1 73 ff 00 b9 01 00 00 a1 73 04 00 00 00 00 00 a1 73 00 00 00 00 00 00 a1 73 00 00 02 00 00 00 31 6c 40 00 16 63 18 0c 31 6c 40 00 16 63 18 1c 77 61 40 00 48 33 40 00 14 e3 63 18 40 31 86 01 00 d1 02 c5 07 23 a1 34 73 61 37 02 02 00 00 a1 Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Reviewed-by: Michael Sun <michaelfsun@google.com> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-04Bluetooth: hci_bcm: Fix kernel doc commentsAndy Shevchenko
Kernel doc validator complains about few missed parameter descriptions. Fill the gap by describing them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-02Bluetooth: btusb: Enable MSFT extension for Mediatek Chip (MT7921)mark-yw.chen
The Mdiatek MT7921(7961) support MSFT HCI extensions, we are using 0xFD30 for VsMsftOpCode. Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more genericIsmael Ferreras Morezuelas
Turns out Hans de Goede completed the work I started last year trying to improve Chinese-clone detection of CSR controller chips. Quirk after quirk these Bluetooth dongles are more usable now. Even after a few BlueZ regressions; these clones are so fickle that some days they stop working altogether. Except on Windows, they work fine. But this force-suspend initialization quirk seems to mostly do the trick, after a lot of testing Bluetooth now seems to work *all* the time. The only problem is that the solution ended up being masked under a very stringent check; when there are probably hundreds of fake dongle models out there that benefit from a good reset. Make it so. Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor") Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers") Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134") Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers") Cc: stable@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: btusb: Enable MSFT extension for Intel next generation controllersChethan T N
The Intel TyphoonPeak, GarfieldPeak Bluetooth controllers support the Microsoft vendor extension and they are using 0xFC1E for VsMsftOpCode. Verified on a GarfieldPeak device through bluetoothctl show Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Michael Sun <michaelfsun@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: btusb: Enable MSFT extension for WCN6855 controllerMichael Sun
The Qualcomm WCN6855 Bluetooth controller supports the Microsoft vendor extension, enable them by setting VsMsftOpCode to 0xFD70. Verified on a WCN6855 device through bluetoothctl show Signed-off-by: Michael Sun <michaelfsun@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: btusb: Load Broadcom firmware for Dell device 413c:8197Ian Mackinnon
Remove the btusb_table entry for 413c:8197 so the device is handled by the later Dell vendor entry, which specifies patchram loading. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev= 1.12 S: Manufacturer=Dell Computer Corp S: Product=DW380 Bluetooth Module S: SerialNumber=74E54354F609 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Ian Mackinnon <imackinnon@gmail.com> Tested-By: Aathif Naseer <aathif394@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: btmrvl_sdio: Remove all strcpy() usesLen Baker
strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy() but in this case it is better to use the scnprintf to simplify the arithmetic. This is a previous step in the path to remove the strcpy() function entirely from the kernel. Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-24Bluetooth: btusb: Add valid le states quirkMichael Sun
Add the valid le states quirk for WCN6855 and GarfieldPeak controller so the 'central-peripheral' role is exposed in userspace. Signed-off-by: Michael Sun <michaelfsun@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-23Bluetooth: hci_h5: Add runtime suspendArchie Pusaka
This patch allows the controller to suspend after a short period of inactivity. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-23Bluetooth: hci_h5: btrtl: Maintain flow control if wakeup is enabledArchie Pusaka
For chips that doesn't reset on suspend, we need to provide the correct value of flow_control when it resumes. Therefore, store the flow control value when reading from the config file to be reused upon suspend. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-23Bluetooth: hci_h5: add WAKEUP_DISABLE flagArchie Pusaka
Some RTL chips resets the FW on suspend, so wakeup is disabled on those chips. This patch introduces this WAKEUP_DISABLE flag so that chips that doesn't reset FW on suspend can leave the flag unset and is allowed to wake the host. This patch also left RTL8822 WAKEUP_DISABLE flag unset, therefore allowing it to wake the host, and preventing reprobing on resume. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btusb: Add support for Foxconn Mediatek ChipAaron Ma
Add support for another Foxconn / Hon Hai device with MT7921 chip. T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0cd Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btrsi: use non-kernel-doc comment for copyrightRandy Dunlap
kernel-doc complains about a non-kernel-doc comment that uses "/**" to begin the comment, so change it to just "/*". drivers/bluetooth/btrsi.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Copyright (c) 2017 Redpine Signals Inc. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com> Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btrtl: Set MSFT opcode for RTL8852Archie Pusaka
RTL8852 support MSFT HCI extension, therefore set the proper MSFT opcode. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btusb: Add support for LG LGSBWAC92/TWCM-K505DForest Crossman
The LG LGSBWAC92/TWCM-K505D/EAT64454801/EAT64454802 (it goes by many names) is a combo WiFi/Bluetooth module that's used in several models of LG TVs. It uses the MediaTek MT7668AUN, which is already supported in btusb, but this device has a non-MediaTek VID:PID pair so to get it to work we just need to add it to the list of devices to probe. Device from /sys/kernel/debug/usb/devices: T: Bus=09 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=3109 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Forest Crossman <cyrozap@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btusb: Fix a unspported condition to set available debug featuresJun Miao
When reading the support debug features failed, there are not available features init. Continue to set the debug features is illogical, we should skip btintel_set_debug_features(), even if check it by "if (!features)". Fixes: c453b10c2b28 ("Bluetooth: btusb: Configure Intel debug feature based on available support") Signed-off-by: Jun Miao <jun.miao@windriver.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btusb: Add support for IMC Networks Mediatek ChipWai Paulo Valerio Wang
This add supports for IMC Networks Wireless_Device Media Chip which contains the MT7921 chipset. $ lsusb Bus 001 Device 004: ID 13d3:3563 IMC Networks Wireless_Device $ cat /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3563 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Wai Paulo Valerio Wang <waicool20@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: hci_h5: Disable the hci_suspend_notifier for btrtl devicesHans de Goede
The hci_suspend_notifier which was introduced last year, is causing problems for uart attached btrtl devices. These devices may loose their firmware and their baudrate setting over a suspend/resume. Since we don't even know the baudrate after a suspend/resume recovering from this is tricky. The driver solves this by treating these devices the same as USB BT HCIs which drop of the bus during suspend. Specifically the driver: 1. Simply unconditionally turns the device fully off during system-suspend to save maximum power. 2. Calls device_reprobe() from a workqueue to fully re-init the device from scratch on system-resume (unregistering the old HCI and registering a new HCI). This means that these devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But in practice this is actually causing problems: 1. These btrtl devices seem to not like the HCI_OP_WRITE_SCAN_ENABLE( SCAN_DISABLED) request being send to them when entering the BT_SUSPEND_CONFIGURE_WAKE state. The same request send on BT_SUSPEND_DISCONNECT works fine, but the second one send (unnecessarily?) from the BT_SUSPEND_CONFIGURE_WAKE transition causes the device to hang: [ 573.497754] PM: suspend entry (s2idle) [ 573.554615] Filesystems sync: 0.056 seconds [ 575.837753] Bluetooth: hci0: Timed out waiting for suspend events [ 575.837801] Bluetooth: hci0: Suspend timeout bit: 4 [ 575.837925] Bluetooth: hci0: Suspend notifier action (3) failed: -110 2. The PM_POST_SUSPEND / BT_RUNNING transition races with the driver-unbinding done by the device_reprobe() work. If the hci_suspend_notifier wins the race it is talking to a dead device leading to the following errors being logged: [ 598.686060] Bluetooth: hci0: Timed out waiting for suspend events [ 598.686124] Bluetooth: hci0: Suspend timeout bit: 5 [ 598.686237] Bluetooth: hci0: Suspend notifier action (4) failed: -110 In both cases things still work, but the suspend-notifier is causing these ugly errors getting logged and ut increase both the suspend- and the resume-time by 2 seconds. This commit avoids these problems by disabling the hci_suspend_notifier. Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-05Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-26Bluetooth: hci_uart: Remove redundant assignment to fw_ptrNigel Christian
The variable fw_ptr is assigned a value that is not read and the same value is assigned in the patch goto. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btmrvl: remove redundant continue statementColin Ian King
The continue statement in the for-loop has no effect, remove it. Addresses-Coverity: ("Continue has no effect") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.Tim Jiang
This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btusb: use default nvm if boardID is 0 for wcn6855.Tim Jiang
if boardID is 0, will use the default nvm file without surfix. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btmtkuart: using pm_runtime_resume_and_get instead of ↵Zhang Qilong
pm_runtime_get_sync Using pm_runtime_resume_and_get is more appropriate for simplifing code Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btrtl: rename USB fw for RTL8761Joakim Tjernlund
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB. Change existing 8761B to UART and add an 8761BU entry for USB Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.Joakim Tjernlund
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=190e Rev= 2.00 S: Manufacturer=Realtek S: Product=ASUS USB-BT500 S: SerialNumber=xxxxxxxx C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hci_h5: Add RTL8822CS capabilitiesArchie Pusaka
RTL8822 chipset supports WBS, and this information is conveyed in btusb.c. However, the UART driver doesn't have this information just yet. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btusb: Add support USB ALT 3 for WBSHilda Wu
Because mSBC frames do not need to be aligned to the SCO packet boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC data satisfy 60 Bytes avoid payload unaligned situation and fixed some headset no voise issue. USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btusb: Add a new QCA_ROME device (0cf3:e500)Daniel Lenski
This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a QCA_ROME device. It appears to be functionally identical to another device ID, also from a QCA9377 board, which was previously marked as QCA_ROME in 0a03f98b98c201191e3ba15a0e33f46d8660e1fd ("Bluetooth: Add a new 04ca:3015 QCA_ROME device"). Without this patch, the WiFi side of the QCA9377 board is slow or unusable when the Bluetooth side is in use. See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing this issue for this device ID. /sys/kernel/debug/usb/devices: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e500 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Lenski <dlenski@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btqca: Moved extracting rom version info to common placeVenkata Lakshmi Narayana Gubba
Moved extracting rom version info to common place as this code is common in all if else ladder in qca_uart_setup. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750Venkata Lakshmi Narayana Gubba
1. Added support to download firmware image with mbn type for wcn6750 as it supports mbn type image. 2. If mbn type image is not present then check for tlv type image. 3. Added debug logs for mbn type image. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750Venkata Lakshmi Narayana Gubba
Added regulators,GPIOs and changes required to power on/off wcn6750. Added support for firmware download for wcn6750. Changes done in detail: 1. Added regulators and corresponding current values. 2. Added sw_ctrl GPIO pin which is output from BT SoC and indicates status of clock supply to BT SoC. 3. Added inline function to check if the SoC type is wcn6750. 4. Modified the function qca_wcn3990_init() to support wcn6750 and renamed it to qca_regulator_init(). Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 05:11:41 +0000