aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/imx/clk-pllv3.c
AgeCommit message (Collapse)Author
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-07clk: imx: clk-pllv3: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_hw_pllv3 function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159Thomas Gleixner
Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03clk: imx: clk-pllv3: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/clk/imx/clk-pllv3.c: In function ‘imx_clk_pllv3’: drivers/clk/imx/clk-pllv3.c:446:18: warning: this statement may fall through [-Wimplicit-fallthrough=] pll->div_shift = 1; ~~~~~~~~~~~~~~~^~~ drivers/clk/imx/clk-pllv3.c:447:2: note: here case IMX_PLLV3_USB: ^~~~ drivers/clk/imx/clk-pllv3.c:453:21: warning: this statement may fall through [-Wimplicit-fallthrough=] pll->denom_offset = PLL_IMX7_DENOM_OFFSET; ^ drivers/clk/imx/clk-pllv3.c:454:2: note: here case IMX_PLLV3_AV: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b4a4cb5a0454 ("clk: imx: correct i.MX7D AV PLL num/denom offset") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-29clk: imx: correct i.MX7D AV PLL num/denom offsetAnson Huang
According reference manual, i.MX7D's audio/video PLL's num/denom register offset are 0x20/0x30, they are different from i.MX6's audio/video PLL, correct it by introducing new offset variables for audio/video PLL and using runtime assignment based on PLL type. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-06-06clk: imx7d: Fix the DDR PLL enable bitFabio Estevam
Commit ad14972422899b6 ("clk: imx7d: Fix the powerdown bit location of PLL DDR") used the incorrect bit for the IMX_PLLV3_DDR_IMX7 case. Fix it accordingly to avoid a kernel hang. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-01clk: imx7d: Fix the powerdown bit location of PLL DDRFabio Estevam
According to the MX7D Reference Manual the powerdown bit of CCM_ANALOG_PLL_DDRn register is bit 20, so fix it accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09clk: imx: pllv3: support fractional multiplier on vf610 PLL1/PLL2Nikita Yushchenko
On vf610, PLL1 and PLL2 have registers to configure fractional part of frequency multiplier. This patch adds support for these registers. This fixes "fast system clock" issue on boards where bootloader sets fractional multiplier for PLL1. Suggested-by: Andrey Smirnov <andrew.smirnov@gmail.com> CC: Chris Healy <cphealy@gmail.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: imx: improve precision of AV PLL to 1 HzEmil Lundmark
The audio and video PLLs are designed to have a precision of 1 Hz if some conditions are met. The current implementation only allows a precision that depends on the rate of the parent clock. E.g., if the parent clock is 24 MHz, the precision will be 24 Hz; or more generally the precision will be p / 10^6 Hz where p is the parent clock rate. This comes down to how the register values for the PLL's fractional loop divider are chosen. The clock rate calculation for the PLL is PLL output frequency = Fref * (DIV_SELECT + NUM / DENOM) or with a shorter notation r = p * (d + a / b) In addition to all variables being integers, we also have the following conditions: 27 <= d <= 54 -2^29 <= a <= 2^29-1 0 < b <= 2^30-1 |a| < b Here, d, a and b are register values for the fractional loop divider. We want to chose d, a and b such that f(p, r) = p, i.e. f is our round_rate function. Currently, d and b are chosen as d = r / p b = 10^6 hence we get the poor precision. And a is defined in terms of r, d, p and b: a = (r - d * p) * b / p I propose that if p <= 2^30-1 (i.e., the max value for b), we chose b as b = p We can do this since |a| < b |(r - d * p) * b / p| < b |r - d * p| < p Which have two solutions, one of them is when p < 0, so we can skip that one. The other is when p > 0 and p * (d - 1) < r < p * (d + 1) Substitute d = r / p: (r - p) < r < (r + p) <=> p > 0 So, as long as p > 0, we can chose b = p. This is a good choise for b since a = (r - d * p) * b / p = (r - d * p) * p / p = r - d * p r = p * (d + a / b) = p * d + p * a / b = p * d + p * a / p = p * d + a and if d = r / p: a = r - d * p = r - r / p * p = 0 r = p * d + a = p * d + 0 = p * r / p = r I reckon this is the intention by the design of the clock rate formula. Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: imx: fix integer overflow in AV PLL round rateEmil Lundmark
Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-16clk: imx: refine the powerdown bit of clk-pllv3Dong Aisheng
The powerdown bit is a bit confused, let's change it to power_bit to relfect both powerdown and powerup case according to different plls. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-13clk: imx: clk-pllv3: fix incorrect handle of enet powerdown bitDong Aisheng
After commit f53947456f98 ("ARM: clk: imx: update pllv3 to support imx7"), the former used BM_PLL_POWER bit is not correct anymore for IMX7 ENET. Instead, pll->powerdown holds the correct bit, so using powerdown bit in clk_pllv3_{prepare | unprepare} functions. Fixes: f53947456f98 ("ARM: clk: imx: update pllv3 to support imx7") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-12clk: imx: correct AV PLL rate formulaAnson Huang
The audio/video PLL's rate calculation is as below in RM: Fref * (DIV_SELECT + NUM / DENOM), in origin clk-pllv3's code, below code is used: (parent_rate * div) + ((parent_rate / mfd) * mfn as it does NOT consider the float data using div, so below formula should be used as a decent method: (parent_rate * div) + ((parent_rate * mfn) / mfd) and we also need to consider parent_rate * mfd may overflow a 32 bit value, 64 bit value should be used. After updating this formula, the dram PLL's rate is 1066MHz, which is correct, while the old formula gets 1056MHz. [Aisheng: fix clk_pllv3_av_round_rate too] Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27clk: imx: return correct frequency for Ethernet PLLStefan Agner
The i.MX 7 designs Ethernet PLL provides a 1000MHz reference clock. Store the reference clock in the clk_pllv3 structure according to the PLL type. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-25clk: imx: add 'is_prepared' clk_ops callback for pllv3 clkBai Ping
Add 'is_prepared' callback function for pllv3 type clk to make sure when the system is bootup, the unused clk is in a known state to match the prepare count info. Signed-off-by: Bai Ping <b51503@freescale.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-20clk: i.MX: Remove clk.h includeStephen Boyd
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Remove the include here because this is a provider driver. Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-03ARM: clk: imx: update pllv3 to support imx7Frank Li
Add type IMX_PLLV3_ENET_IMX7 Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: using unsigned variable for do_divAnson Huang
The definition of do_div uses unsigned long long variable as its first parameter, better to pass a u64 variable as first parameter when calling do_div function. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: move clock drivers into drivers/clkShawn Guo
After the cleanup on clock drivers, they are now ready to be moved into drivers/clk. Let's move them into drivers/clk/imx folder. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>