aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-12-18clk: qcom: Avoid SMMU/cx gdsc corner casesJeffrey Hugo
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid corner cases with SMMU per hardware documentation. Fixes: 3f7df5baa259 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCsMatthias Kaehlcke
Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: Move clk_core_reparent_orphans() under CONFIG_OFOlof Johansson
A recent addition exposed a helper that is only used for CONFIG_OF. Move it into the CONFIG_OF zone in this file to make the compiler stop warning about an unused function. Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration") Signed-off-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org [sboyd@kernel.org: "Simply" move the function instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-16clk: at91: fix possible deadlockAlexandre Belloni
Lockdep warns about a possible circular locking dependency because using syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use the recently introduced device_node_to_regmap to solve that as it looks up the regmap in the same list but doesn't care about the clocks. Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-12Merge tag 'imx-clk-fixes-5.5' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes Pull i.MX clk fixes from Shawn Guo: - Add missing lock to divider in the composite driver for exclusive register access - Add missing sentinel for ulp_div_table in clk-imx7ulp driver - Fix clk_pll14xx_wait_lock() function which calls into readl_poll_timeout() with incorrect parameter * tag 'imx-clk-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux
2019-12-12clk: walk orphan list on clock provider registrationJerome Brunet
So far, we walked the orphan list every time a new clock was registered in CCF. This was fine since the clocks were only referenced by name. Now that the clock can be referenced through DT, it is not enough: * Controller A register first a reference clocks from controller B through DT. * Controller B register all its clocks then register the provider. Each time controller B registers a new clock, the orphan list is walked but it can't match since the provider is registered yet. When the provider is finally registered, the orphan list is not walked unless another clock is registered afterward. This can lead to situation where some clocks remain orphaned even if the parent is available. Walking the orphan list on provider registration solves the problem. Reported-by: Jian Hu <jian.hu@amlogic.com> Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-11clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_tablePeng Fan
There should be a sentinel of ulp_div_table, otherwise _get_table_div may access data out of the array. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-composite-8m: add lock to gate/muxPeng Fan
There is a lock to divider in the composite driver, but that's not enough. lock to gate/mux are also needed to provide exclusive access to the register. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-05Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "Most of these are for MMP (seeing a bunch of cleanups and refactorings for the first time in a while), and for OMAP (a bunch of cleanups and added support for voltage controller on OMAP4430)" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED ARM: imx: use generic function to exit coherency ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 ARM: hisi: drop useless depend on ARCH_MULTI_V7 arm64: realtek: Select reset controller ARM: shmobile: rcar-gen2: Drop legacy DT clock support ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support ...
2019-12-05Merge branch 'thermal/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...
2019-12-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-27Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' ↵Stephen Boyd
into clk-next - Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers
2019-11-27Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and ↵Stephen Boyd
'clk-pxa' into clk-next - Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and ↵Stephen Boyd
'clk-aspeed' into clk-next - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and ↵Stephen Boyd
'clk-imx' into clk-next * clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-27Merge branches 'clk-rohm', 'clk-hisilicon', 'clk-marvell', 'clk-unused' and ↵Stephen Boyd
'clk-devm-ioremap-resource' into clk-next - Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() * clk-rohm: clk: bd718x7: Add MODULE_ALIAS() * clk-hisilicon: clk: hisilicon: fix sparse warnings in clk-hi3660.c clk: hisilicon: fix sparse warnings in clk-hi3670.c * clk-marvell: dt-bindings: clk: armada3700: document the PCIe clock dt-bindings: clk: armada3700: fix typo in SoC name clk: mvebu: armada-37xx-periph: change suspend/resume time clk: mvebu: armada-37xx-periph: add PCIe gated clock * clk-unused: clk: armada-xp: remove unused code clk: imx: imx8mn: drop unused pll enum clk: ast2600: remove unused variable 'eclk_parent_names' * clk-devm-ioremap-resource: clk: sprd: Change to use devm_platform_ioremap_resource() clk: s3c2410: use devm_platform_ioremap_resource() to simplify code clk: axs10x: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code clk: davinci: use devm_platform_ioremap_resource() to simplify code clk: hisilicon: use devm_platform_ioremap_resource() to simplify code clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
2019-11-26clk: aspeed: Add RMII RCLK gates for both AST2500 MACsAndrew Jeffery
RCLK is a fixed 50MHz clock derived from HPLL that is described by a single gate for each MAC. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lkml.kernel.org/r/20191010020655.3776-3-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Add common clock driver for BM1880 SoCManivannan Sadhasivam
Add common clock driver for Bitmain BM1880 SoC. The clock controller on BM1880 has supplies clocks to all peripherals in the form of gate clocks and composite clocks (fixed factor + gate). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-7-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Add clk_hw_unregister_composite helper function definitionManivannan Sadhasivam
This function has been delcared but not defined anywhere. Hence, this commit adds definition for it. Fixes: 49cb392d3639 ("clk: composite: Add hw based registration APIs") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-3-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: Zero init clk_init_data in helpersManivannan Sadhasivam
The clk_init_data struct needs to be initialized to zero for the new parent_map implementation to work correctly. Otherwise, the member which is available first will get processed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-22clk: ingenic: Allow drivers to be built with COMPILE_TESTStephen Boyd
We don't need the MIPS architecture or even a MIPS compiler to compile test these drivers. Let's add a COMPILE_TEST possibility on the menuconfig here so that we can build these drivers on more configurations. Cc: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191114001925.159276-1-sboyd@kernel.org Reviewed-by: Paul Cercueil <paul@crapouillou.net>
2019-11-19clk: mark clk_disable_unused() as __initRasmus Villemoes
clk_disable_unused is only called once, as a late_initcall, so reclaim a bit of memory by marking it (and the functions and data it is the sole user of) as __init/__initdata. This moves ~1900 bytes from .text to .init.text for a imx_v6_v7_defconfig. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lkml.kernel.org/r/20191004094826.8320-1-linux@rasmusvillemoes.dk Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-19clk: Fix memory leak in clk_unregister()Kishon Vijay Abraham I
Memory allocated in alloc_clk() for 'struct clk' and 'const char *con_id' while invoking clk_register() is never freed in clk_unregister(), resulting in kmemleak showing the following backtrace. backtrace: [<00000000546f5dd0>] kmem_cache_alloc+0x18c/0x270 [<0000000073a32862>] alloc_clk+0x30/0x70 [<0000000082942480>] __clk_register+0xc8/0x760 [<000000005c859fca>] devm_clk_register+0x54/0xb0 [<00000000868834a8>] 0xffff800008c60950 [<00000000d5a80534>] platform_drv_probe+0x50/0xa0 [<000000001b3889fc>] really_probe+0x108/0x348 [<00000000953fa60a>] driver_probe_device+0x58/0x100 [<0000000008acc17c>] device_driver_attach+0x6c/0x90 [<0000000022813df3>] __driver_attach+0x84/0xc8 [<00000000448d5443>] bus_for_each_dev+0x74/0xc8 [<00000000294aa93f>] driver_attach+0x20/0x28 [<00000000e5e52626>] bus_add_driver+0x148/0x1f0 [<000000001de21efc>] driver_register+0x60/0x110 [<00000000af07c068>] __platform_driver_register+0x40/0x48 [<0000000060fa80ee>] 0xffff800008c66020 Fix it here. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lkml.kernel.org/r/20191022071153.21118-1-kishon@ti.com Fixes: 1df4046a93e0 ("clk: Combine __clk_get() and __clk_create_clk()") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: Ingenic: Add CGU driver for X1000.Zhou Yanjie
Add support for the clocks provided by the CGU in the Ingenic X1000 SoC, making use of the cgu code to do the heavy lifting. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lkml.kernel.org/r/1573378102-72380-3-git-send-email-zhouyanjie@zoho.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: tegra: Use match_string() helper to simplify the codeYueHaibing
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191109034226.21044-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: pxa: fix one of the pxa RTC clocksRobert Jarzmik
The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and rtc-pxa drivers. A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't fixed. This patch completes the previous one. Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: sprd: Use IS_ERR() to validate the return value of ↵Baolin Wang
syscon_regmap_lookup_by_phandle() The syscon_regmap_lookup_by_phandle() will never return NULL, thus use IS_ERR() to validate the return value instead of IS_ERR_OR_NULL(). Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lkml.kernel.org/r/1995139bee5248ff3e9d46dc715968f212cfc4cc.1570520268.git.baolin.wang@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13clk: armada-xp: remove unused codeYueHaibing
drivers/clk/mvebu/armada-xp.c:171:38: warning: mv98dx3236_coreclks defined but not used [-Wunused-const-variable=] drivers/clk/mvebu/armada-xp.c:213:41: warning: mv98dx3236_gating_desc defined but not used [-Wunused-const-variable=] They are not used since commit 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support"). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191111140420.36092-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11clk: tegra: Fix build error without CONFIG_PM_SLEEPYueHaibing
If CONFIG_PM_SLEEP is n, build fails: drivers/clk/tegra/clk-tegra210.c:3426:13: error: tegra210_clk_suspend undeclared here (not in a function); did you mean tegra_clk_ndspeed? .suspend = tegra210_clk_suspend, ^~~~~~~~~~~~~~~~~~~~ tegra_clk_ndspeed drivers/clk/tegra/clk-tegra210.c:3427:12: error: tegra210_clk_resume undeclared here (not in a function); did you mean tegra210_clk_suspend? .resume = tegra210_clk_resume, Use ifdef to guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 27d10d548c04 ("clk: tegra: Add suspend and resume support on Tegra210") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Optimize PLLX restore on Tegra20/30Dmitry Osipenko
There is no need to re-configure PLLX if its configuration in unchanged on return from suspend / cpuidle, this saves 300us if PLLX is already enabled (common case for cpuidle). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Add suspend and resume support on Tegra210Sowjanya Komatineni
All the CAR controller settings are lost on suspend when core power goes off. This implement saving and restoring context for all PLLs and clocks during system suspend and resume to have the clocks back to same state for normal operation. Clock driver suspend and resume are registered as syscore_ops as clocks restore need to happen before the other drivers resume to have all their clocks back to the same state as before suspend. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Share clk and rst register defines with Tegra clock driverSowjanya Komatineni
Move CLK_OUT_ENB and RST_DEVICES registers to clk.h to share these with Tegra clock driver. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Use fence_udelay() during PLLU initSowjanya Komatineni
This patch uses fence_udelay rather than udelay during PLLU initialization to ensure writes to clock registers happens before waiting for specified delay. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-dfll: Add suspend and resume supportSowjanya Komatineni
This patch implements DFLL suspend and resume operation. During system suspend entry, CPU clock will switch CPU to safe clock source of PLLP and disables DFLL clock output. DFLL driver suspend confirms DFLL disable state and errors out on being active. DFLL is re-initialized during the DFLL driver resume as it goes through complete reset during suspend entry. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-super: Add restore-context supportSowjanya Komatineni
This patch implements restore_context for clk_super_mux and clk_super. During system supend, core power goes off the and context of Tegra CAR registers is lost. So on system resume, context of super clock registers are restored to have them in same state as before suspend. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: clk-super: Fix to enable PLLP branches to CPUSowjanya Komatineni
This patch has a fix to enable PLLP branches to CPU before changing the CPU cluster clock source to PLLP for Gen5 Super clock and disables PLLP branches to CPU when not in use. During system suspend entry and exit, CPU source will be switched to PLLP and this needs PLLP branches to be enabled to CPU prior to the switch. On system resume, warmboot code enables PLLP branches to CPU and powers up the CPU with PLLP clock source. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: periph: Add restore_context supportSowjanya Komatineni
This patch implements restore_context support for clk-periph and clk-sdmmc-mux clock operations to restore clock parent and rates on system resume. During system suspend, core power goes off and looses the context of the Tegra clock controller registers. So on system resume, clocks parent and rate are restored back to the context before suspend based on cached data. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Support for OSC context save and restoreSowjanya Komatineni
This patch adds support for saving OSC clock frequency and the drive-strength during OSC clock init and creates an API to restore OSC control register value from the saved context. This API is invoked by Tegra210 clock driver during system resume to restore the OSC clock settings. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: pll: Save and restore pll contextSowjanya Komatineni
This patch implements save and restore of PLL context. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So during resume, pll context is restored based on cached rate and state. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: pllout: Save and restore pllout contextSowjanya Komatineni
This patch implements save and restore of pllout context. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So during suspend entry the state of pllout is saved and on resume it is restored back to have pllout in same state as before suspend. pllout rate is saved and restore in clock divider so it will be at same rate as before suspend when pllout state is restored. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: divider: Save and restore divider rateSowjanya Komatineni
This patch implements context restore for clock divider. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So on resume, clock dividers are restored back for normal operation. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Reimplement SOR clocks on Tegra210Thierry Reding
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Reimplement SOR clock on Tegra124Thierry Reding
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Rename sor0_lvds to sor0_outThierry Reding
This makes Tegra124 and Tegra210 consistent with subsequent Tegra generations. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Move SOR0 implementation to Tegra124Thierry Reding
The SOR0 clock on Tegra210 is very different from the SOR0 clock found on Tegra124. Move the Tegra124 implementation to the Tegra124 driver so that a custom implementation can be provided on Tegra210 without clashing with the existing clock. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRCThierry Reding
Later SoC generations implement this clock as SOR1_OUT. For consistency, the Tegra210 implementation was adapted to match the same name in commit 4d1dc4018573 ("dt-bindings: clock: tegra: Add sor1_out clock"). Clean up the remaining pieces by adopting the new name for the internal identifiers and remove the old alias. Note that since both SOR1_SRC and SOR1_OUT were referring to the same device tree clock ID, this does not break device tree ABI. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11Merge branch 'for-5.5/clk-core' into for-5.5/clkThierry Reding
2019-11-11clk: tegra: Add Tegra20/30 EMC clock implementationDmitry Osipenko
A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: Add API to get index of the clock parentSowjanya Komatineni
This patch adds a new clk_hw_get_parent_index() function that can be used to retrieve the index of a given clock's parent. This can be useful for restoring a clock on system resume. Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 22:00:59 +0000