| Age | Commit message (Collapse) | Author |
|---|
|
Pull ARM SoC late updates from Olof Johansson:
"This is some material that we picked up into our tree late, or that
had more complex dependencies on more than one topic branch that makes
sense to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to
better reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
ARM: dts: Configure interconnect target module for am437x sgx
ARM: dts: Configure sgx for dra7
ARM: dts: Configure rstctrl reset for am335x SGX
ARM: dts: dra7: Add ti-sysc node for VPE
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43xx: add support for clkout1 clock
arm: dts: dra76-evm: Add CAL and OV5640 nodes
arm: dtsi: dra76x: Add CAL dtsi node
arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
ARM: dts: DRA72: Add CAL dtsi node
ARM: dts: dra7-l4: Add ti-sysc node for CAM
ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
ARM: dts: dra7: add cam clkctrl node
ARM: OMAP2+: Drop legacy platform data for omap4 des
ARM: OMAP2+: Drop legacy platform data for omap4 sham
ARM: OMAP2+: Drop legacy platform data for omap4 aes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
|
|
Change the Hyper-V clocksource ratings to 250, below the TSC clocksource
rating of 300. In configurations where Hyper-V offers an InvariantTSC,
the TSC is not marked "unstable", so the TSC clocksource is available
and preferred. With the higher rating, it will be the default. On
older hardware and Hyper-V versions, the TSC is marked "unstable", so no
TSC clocksource is created and the selected Hyper-V clocksource will be
the default.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200109160650.16150-3-parri.andrea@gmail.com
|
|
hyperv_timer.c exports hyperv_cs, which is used by stimers and the
timesync mechanism. However, the clocksource dependency is not
needed: these mechanisms only depend on the partition reference
counter (which can be read via a MSR or via the TSC Reference Page).
Introduce the (function) pointer hv_read_reference_counter, as an
embodiment of the partition reference counter read, and export it
in place of the hyperv_cs pointer. The latter can be removed.
This should clarify that there's no relationship between Hyper-V
stimers & timesync and the Linux clocksource abstractions. No
functional or semantic change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com
|
|
Fix sparse warning:
"warning: Using plain integer as NULL pointer"
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578304688-14882-1-git-send-email-claudiu.beznea@microchip.com
|
|
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200104152107.11407-12-krzk@kernel.org
|
|
Clean-up commit 8c82723414d5 ("clocksource/drivers/timer-ti-dm: Switch to
platform_get_irq") caused a regression where we now try to access
uninitialized data for timer:
drivers/clocksource/timer-ti-dm.c: In function 'omap_dm_timer_probe':
drivers/clocksource/timer-ti-dm.c:798:13: warning: 'timer' may be used
uninitialized in this function [-Wmaybe-uninitialized]
On boot we now get:
Unable to handle kernel NULL pointer dereference at virtual address
00000004
...
(omap_dm_timer_probe) from [<c061ac7c>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c0618c04>] (really_probe+0x1dc/0x348)
(really_probe) from [<c0618ef4>] (driver_probe_device+0x5c/0x160)
Let's fix the issue by moving platform_get_irq to happen after timer has
been allocated.
Fixes: bc83caddf17b ("clocksource/drivers/timer-ti-dm: Switch to platform_get_irq")
Cc: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200106203700.21009-1-tony@atomide.com
|
|
platform_get_resource(pdev, IORESOURCE_IRQ) is not recommended for
requesting IRQ's resources, as they can be not ready yet. Using
platform_get_irq() instead is preferred for getting IRQ even if it
was not retrieved earlier.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191221173027.30716-5-tiny.windzz@gmail.com
|
|
Use devm_platform_ioremap_resource() to simplify code, which
wraps 'platform_get_resource' and 'devm_ioremap_resource' in a
single helper.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191221173027.30716-4-tiny.windzz@gmail.com
|
|
'irq' and 'ret' are variables of the same type and there is no
need to use two lines.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191221173027.30716-3-tiny.windzz@gmail.com
|
|
Use devm_platform_ioremap_resource() to simplify code, which
wraps 'platform_get_resource' and 'devm_ioremap_resource' in a
single helper.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191221173027.30716-2-tiny.windzz@gmail.com
|
|
Currently when setup_irq fails the error exit path will leak the
recently allocated timer structure. Originally the code would
throw a panic but a later commit changed the behaviour to return
via the err_iounmap path and hence we now have a memory leak. Fix
this by adding a err_timer_free error path that kfree's timer.
Addresses-Coverity: ("Resource Leak")
Fixes: 524a7f08983d ("clocksource/drivers/bcm2835_timer: Convert init function to return error")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191219213246.34437-1-colin.king@canonical.com
|
|
Currently TTC driver is TIMER_OF_DECLARE type driver. Because of
that, TTC driver may be initialized before other clock drivers. If
TTC driver is dependent on that clock driver then initialization of
TTC driver will failed.
So use TTC driver as platform driver instead of using
TIMER_OF_DECLARE.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1573122988-18399-1-git-send-email-rajan.vaja@xilinx.com
|
|
Add driver for Microchip PIT64B timer. Timer could be used in continuous
mode or oneshot mode. The hardware has 2x32 bit registers for period
emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to
set the period value (compare value). TLSB and TMSB keeps the current
value of the counter. After a compare the TLSB and TMSB register resets.
The driver uses PIT64B timer for clocksource or clockevent. First
requested timer would be registered as clockevent, second one would be
registered as clocksource. Individual PIT64B hardware resources were
used for clocksource and clockevent to be able to support high resolution
timers with this hardware implementation.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
|
|
Currently, the reserved size for a tsc page is 4K, which is enough for
communicating with hypervisor. However, in the case where we want to
export the tsc page to userspace (e.g. for vDSO to read the
clocksource), the tsc page should be at least PAGE_SIZE, otherwise, when
PAGE_SIZE is larger than 4K, extra kernel data will be mapped into
userspace, which means leaking kernel information.
Therefore reserve PAGE_SIZE space for tsc_pg as a preparation for the
vDSO support of ARM64 in the future. Also, while at it, replace all
reference to tsc_pg with hv_get_tsc_page() since it should be the only
interface to access tsc page.
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Cc: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191126021723.4710-1-boqun.feng@gmail.com
|
|
Fix lots of typo, spelling, punctuation, and grammar miscues in
drivers/clocksource/Kconfig.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/4deb42a9-82f2-72f9-891f-972a9a399f4f@infradead.org
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191120134236.15959-1-krzk@kernel.org
|
|
This is needed for hibernation, e.g. when we resume the old kernel, we need
to disable the "current" kernel's TSC page and then resume the old kernel's.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1574233946-48377-1-git-send-email-decui@microsoft.com
|
|
The DM365 platform has a strange quirk (only present when using ancient
u-boot - mainline u-boot v2013.01 and later works fine) where if we
enable the second half of the timer in periodic mode before we do its
initialization - the time won't start flowing and we can't boot.
When using more recent u-boot, we can enable the timer, then reinitialize
it and all works fine.
To work around this issue only enable clockevents once tim34 is
initialized i.e. move clockevents_config_and_register() below tim34
initialization.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
When enabling ftrace graph tracer, it gets the tracing clock in
ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock()
to get the clock value. If riscv_sched_clock() isn't marked with
'notrace', it will call ftrace_push_return_trace() and cause infinite
loop.
The result of failure as follow:
command: echo function_graph >current_tracer
[ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48
[ 46.177309] Oops [#1]
[ 46.177478] Modules linked in:
[ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47
[ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0
[ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968
[ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0
[ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411
[ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48
[ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005
[ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58
[ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003
[ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004
[ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90
[ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000
[ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[paul.walmsley@sifive.com: cleaned up patch description]
Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
"The main changes in the timer code in this cycle were:
- Clockevent updates:
- timer-of framework cleanups. (Geert Uytterhoeven)
- Use timer-of for the renesas-ostm and the device name to prevent
name collision in case of multiple timers. (Geert Uytterhoeven)
- Check if there is an error after calling of_clk_get in asm9260
(Chuhong Yuan)
- ABI fix: Zero out high order bits of nanoseconds on compat
syscalls. This got broken a year ago, with apparently no side
effects so far.
Since the kernel would use random data otherwise I don't think we'd
have other options but to fix the bug, even if there was a side
effect to applications (Dmitry Safonov)
- Optimize ns_to_timespec64() on 32-bit systems: move away from
div_s64_rem() which can be slow, to div_u64_rem() which is faster
(Arnd Bergmann)
- Annotate KCSAN-reported false positive data races in
hrtimer_is_queued() users by moving timer->state handling over to
the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
(Eric Dumazet)
- Misc cleanups and small fixes"
[ I undid the "ABI fix" and updated the comments instead. The reason
there were apparently no side effects is that the fix was a no-op.
The updated comment is to say _why_ it was a no-op. - Linus ]
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Zero the upper 32-bits in __kernel_timespec on 32-bit
time: Rename tsk->real_start_time to ->start_boottime
hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
time: Fix spelling mistake in comment
time: Optimize ns_to_timespec64()
hrtimer: Annotate lockless access to timer->state
clocksource/drivers/asm9260: Add a check for of_clk_get
clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
clocksource/drivers/renesas-ostm: Convert to timer_of
clocksource/drivers/timer-of: Use unique device name instead of timer
clocksource/drivers/timer-of: Convert last full_name to %pOF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"New features:
- SECCOMP support
- nommu support
- SBI-less system support
- M-Mode support
- TLB flush optimizations
Other improvements:
- Pass the complete RISC-V ISA string supported by the CPU cores to
userspace, rather than redacting parts of it in the kernel
- Add platform DMA IP block data to the HiFive Unleashed board DT
file
- Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
compression formats, in line with other architectures
Cleanups:
- Remove unnecessary PTE_PARENT_SIZE macro
- Standardize include guard naming across arch/riscv"
* tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
riscv: provide a flat image loader
riscv: add nommu support
riscv: clear the instruction cache and all registers when booting
riscv: read the hart ID from mhartid on boot
riscv: provide native clint access for M-mode
riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00
riscv: add support for MMIO access to the timer registers
riscv: implement remote sfence.i using IPIs
riscv: cleanup the default power off implementation
riscv: poison SBI calls for M-mode
riscv: don't allow selecting SBI based drivers for M-mode
RISC-V: Add multiple compression image format.
riscv: clean up the macro format in each header file
riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE
riscv: abstract out CSR names for supervisor vs machine mode
riscv: separate MMIO functions into their own header file
riscv: enter WFI in default_power_off() if SBI does not shutdown
RISC-V: Issue a tlb page flush if possible
RISC-V: Issue a local tlbflush if possible.
RISC-V: Do not invoke SBI call if cpumask is empty
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates to the hyperv guest code:
- Rework clockevents initialization to better support hibernation
- Allow guests to enable InvariantTSC
- Micro-optimize send_ipi_one"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Initialize clockevents earlier in CPU onlining
x86/hyperv: Allow guests to enable InvariantTSC
x86/hyperv: Micro-optimize send_ipi_one()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Hyper-V has historically initialized stimer-based clockevents late in the
process of onlining a CPU because clockevents depend on stimer
interrupts. In the original Hyper-V design, stimer interrupts generate a
VMbus message, so the VMbus machinery must be running first, and VMbus
can't be initialized until relatively late. On x86/64, LAPIC timer based
clockevents are used during early initialization before VMbus and
stimer-based clockevents are ready, and again during CPU offlining after
the stimer clockevents have been shut down.
Unfortunately, this design creates problems when offlining CPUs for
hibernation or other purposes. stimer-based clockevents are shut down
relatively early in the offlining process, so clockevents_unbind_device()
must be used to fallback to the LAPIC-based clockevents for the remainder
of the offlining process. Furthermore, the late initialization and early
shutdown of stimer-based clockevents doesn't work well on ARM64 since there
is no other timer like the LAPIC to fallback to. So CPU onlining and
offlining doesn't work properly.
Fix this by recognizing that stimer Direct Mode is the normal path for
newer versions of Hyper-V on x86/64, and the only path on other
architectures. With stimer Direct Mode, stimer interrupts don't require any
VMbus machinery. stimer clockevents can be initialized and shut down
consistent with how it is done for other clockevent devices. While the old
VMbus-based stimer interrupts must still be supported for backward
compatibility on x86, that mode of operation can be treated as legacy.
So add a new Hyper-V stimer entry in the CPU hotplug state list, and use
that new state when in Direct Mode. Update the Hyper-V clocksource driver
to allocate and initialize stimer clockevents earlier during boot. Update
Hyper-V initialization and the VMbus driver to use this new design. As a
result, the LAPIC timer is no longer used during boot or CPU
onlining/offlining and clockevents_unbind_device() is not called. But
retain the old design as a legacy implementation for older versions of
Hyper-V that don't support Direct Mode.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
|
|
When running in M-mode we can't use the SBI to set the timer, and
don't have access to the time CSR as that usually is emulated by
M-mode. Instead provide code that directly accesses the MMIO for
the timer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource
[paul.walmsley@sifive.com: updated to apply; fixed checkpatch
issue; timex.h now includes asm/mmio.h to resolve header file
problems]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Many of the privileged CSRs exist in a supervisor and machine version
that are used very similarly. Provide versions of the CSR names and
fields that map to either the S-mode or M-mode variant depending on
a new CONFIG_RISCV_M_MODE kconfig symbol.
Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>
and Paul Walmsley <paul.walmsley@sifive.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent updates from Daniel Lezcano:
- Some cleanups for the timer-of, use %p0F and the unique device name
(Geert Uytterhoeven)
- Use timer-of for the renesas-ostm and the device name to prevent
name collision in case of multiple timers (Geert Uytterhoeven)
- Check if there is an error after calling of_clk_get in asm9260
(Chuhong Yuan)
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevent fixes from Daniel Lezcano:
- Fix scary messages in sh_mtu2 by using platform_irq_count() helper
function (Geert Uytterhoeven)
- Fix double free when using timer-of in the mediatek timer driver
(Fabien Parent)
|
|
asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
|
|
Currently all OSTM devices are called "ostm", also in kernel messages.
As there can be multiple instances in an SoC, this can confuse the user.
Hence construct a unique name from the DT node name, like is done for
platform devices.
On RSK+RZA1, the boot log changes like:
-clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
+clocksource: timer@fcfec000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns
-ostm: used for clocksource
-ostm: used for clock events
+/soc/timer@fcfec000: used for clocksource
+/soc/timer@fcfec400: used for clock events
...
-clocksource: Switched to clocksource ostm
+clocksource: Switched to clocksource timer@fcfec000
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-5-geert+renesas@glider.be
|
|
Convert the Renesas OSTM driver to use the timer_of framework.
This reduces the driver object size by 367 bytes (with gcc 7.4.0).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-4-geert+renesas@glider.be
|
|
If a hardware-specific driver does not provide a name, the timer-of core
falls back to device_node.name. Due to generic DT node naming policies,
that name is almost always "timer", and thus doesn't identify the actual
timer used.
Fix this by using device_node.full_name instead, which includes the unit
addrees.
Example impact on /proc/timer_list:
-Clock Event Device: timer
+Clock Event Device: timer@fcfec400
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be
|
|
Commit 469869d18a886e04 ("clocksource: Convert to using %pOF instead of
full_name") converted all but the one just added before by commit
32f2fea6e77e64cd ("clocksource/drivers/timer-of: Handle
of_irq_get_byname() result correctly").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-2-geert+renesas@glider.be
|
|
We want the sysfs fix in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-11-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Fixed indentation]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
As platform_get_irq_by_name() now prints an error when the interrupt
does not exist, looping over possibly non-existing interrupts causes the
printing of scary messages like:
sh_mtu2 fcff0000.timer: IRQ tgi1a not found
sh_mtu2 fcff0000.timer: IRQ tgi2a not found
Fix this by using the platform_irq_count() helper, to avoid touching
non-existent interrupts. Limit the returned number of interrupts to the
maximum number of channels currently supported by the driver in a
future-proof way, i.e. using ARRAY_SIZE() instead of a hardcoded number.
Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016143003.28561-1-geert+renesas@glider.be
|
|
When timer_of_init fails, it cleans up after itself by undoing
everything it did during the initialization function.
mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if
timer_of_init fails. timer_of_cleanup try to release the resource
taken. Since these resources have already been cleaned up by
timer_of_init, we end up getting a few warnings printed:
[ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128
[ 0.002650] Modules linked in:
[ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1
[ 0.003852] Hardware name: MediaTek MT8183 (DT)
[ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO)
[ 0.005073] pc : __clk_put+0xe8/0x128
[ 0.005555] lr : clk_put+0xc/0x14
[ 0.005988] sp : ffffff80090b3ea0
[ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018
[ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001
[ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828
[ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb
[ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8
[ 0.010612] x17: ffffffc012996980 x16: 0000000000000000
[ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334
[ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0
[ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040
[ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000
[ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000
[ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000
[ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb
[ 0.016896] Call trace:
[ 0.017218] __clk_put+0xe8/0x128
[ 0.017654] clk_put+0xc/0x14
[ 0.018048] timer_of_cleanup+0x60/0x7c
[ 0.018551] mtk_syst_init+0x8c/0x9c
[ 0.019020] timer_probe+0x6c/0xe0
[ 0.019469] time_init+0x14/0x44
[ 0.019893] start_kernel+0x2d0/0x46c
[ 0.020378] ---[ end trace 8c1efabea1267649 ]---
[ 0.020982] ------------[ cut here ]------------
[ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____))
[ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8
[ 0.023119] Modules linked in:
[ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1
[ 0.024498] Hardware name: MediaTek MT8183 (DT)
[ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO)
[ 0.025718] pc : __vunmap+0xd0/0xd8
[ 0.026176] lr : __vunmap+0xd0/0xd8
[ 0.026632] sp : ffffff80090b3e90
[ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018
[ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001
[ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828
[ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[ 0.029858] x21: 0000000000000000 x20: 0000000000000000
[ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8
[ 0.031254] x17: 0000000000000000 x16: 0000000000000000
[ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334
[ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40
[ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470
[ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef
[ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000
[ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002
[ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100
[ 0.037536] Call trace:
[ 0.037859] __vunmap+0xd0/0xd8
[ 0.038271] vunmap+0x24/0x30
[ 0.038664] __iounmap+0x2c/0x34
[ 0.039088] timer_of_cleanup+0x70/0x7c
[ 0.039591] mtk_syst_init+0x8c/0x9c
[ 0.040060] timer_probe+0x6c/0xe0
[ 0.040507] time_init+0x14/0x44
[ 0.040932] start_kernel+0x2d0/0x46c
This commit remove the calls to timer_of_cleanup when timer_of_init
fails since it is unnecessary and actually cause warnings to be printed.
Fixes: a0858f937960 ("mediatek: Convert the driver to timer-of")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/20190919191315.25190-1-fparent@baylibre.com/
|
|
Old early platform device support is now sh-specific. Before moving on
to implementing new early platform framework based on real platform
devices, prefix all early platform symbols with 'sh_'.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SuperH is the only user of the current implementation of early platform
device support. We want to introduce a more robust approach to early
probing. As the first step - move all the current early platform code
to arch/sh.
In order not to export internal drivers/base functions to arch code for
this temporary solution - copy the two needed routines for driver
matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c.
Also: call early_platform_cleanup() from subsys_initcall() so that it's
called after all early devices are probed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Randy Dunlap reports on the sparse list that sparse warns about this
expression:
of_irq->percpu ? free_percpu_irq(of_irq->irq, clkevt) :
free_irq(of_irq->irq, clkevt);
and honestly, sparse is correct to warn. The return type of
free_percpu_irq() is 'void', while free_irq() returns a 'const void *'
that is the devname argument passed in to the request_irq().
You can't mix a void type with a non-void types in a conditional
expression according to the C standard. It so happens that gcc seems to
accept it - and the resulting type of the expression is void - but
there's really no reason for the kernel to have this kind of
non-standard expression with no real upside.
The natural way to write that expression is with an if-statement:
if (of_irq->percpu)
free_percpu_irq(of_irq->irq, clkevt);
else
free_irq(of_irq->irq, clkevt);
which is more legible anyway.
I'm not sure why that timer-of code seems to have this odd pattern. It
does the same at allocation time, but at least there the types match,
and it makes sense as an expression.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull MIPS updates from Paul Burton:
"Main MIPS changes:
- boot_mem_map is removed, providing a nice cleanup made possible by
the recent removal of bootmem.
- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
or MIPS32 systems using cmpxchg64().
- Conversion to the new generic VDSO infrastructure courtesy of
Vincenzo Frascino.
- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.
- Initial MIPS32 huge page support, functional on at least Ingenic
SoCs.
- pte_special() is now supported for some configurations, allowing
among other things generic fast GUP to be used.
- Miscellaneous fixes & cleanups.
And platform specific changes:
- Major improvements to Ingenic SoC support from Paul Cercueil,
mostly enabled by the inclusion of the new TCU (timer-counter unit)
drivers he's spent a very patient year or so working on. Plus some
fixes for X1000 SoCs from Zhou Yanjie.
- Netgear R6200 v1 systems are now supported by the bcm47xx platform.
- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"
* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
MIPS: Detect bad _PFN_SHIFT values
MIPS: Disable pte_special() for MIPS32 with RiXi
MIPS: ralink: deactivate PCI support for SOC_MT7621
mips: compat: vdso: Use legacy syscalls as fallback
MIPS: Drop Loongson _CACHE_* definitions
MIPS: tlbex: Remove cpu_has_local_ebase
MIPS: tlbex: Simplify r3k check
MIPS: Select R3k-style TLB in Kconfig
MIPS: PCI: refactor ioc3 special handling
mips: remove ioremap_cachable
mips/atomic: Fix smp_mb__{before,after}_atomic()
mips/atomic: Fix loongson_llsc_mb() wreckage
mips/atomic: Fix cmpxchg64 barriers
MIPS: Octeon: remove duplicated include from dma-octeon.c
firmware: bcm47xx_nvram: Allow COMPILE_TEST
firmware: bcm47xx_nvram: Correct size_t printf format
MIPS: Treat Loongson Extensions as ASEs
MIPS: Remove dev_err() usage after platform_get_irq()
MIPS: dts: mscc: describe the PTP ready interrupt
MIPS: dts: mscc: describe the PTP register range
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
|
|
If we just use the CSRs that these map to directly the code is simpler
and doesn't require extra inline assembly code. Also fix up the top-level
comment in timer-riscv.c to not talk about the cycle count or mention
details of the clocksource interface, of which this file is just a
consumer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Update the CMT driver to mark "renesas,cmt-48" as deprecated.
Instead of documenting a theoretical hardware device based on current software
support level, define DT bindings top-down based on available data sheet
information and make use of part numbers in the DT compat string.
In case of the only in-tree users r8a7740 and sh73a0 the compat strings
"renesas,r8a7740-cmt1" and "renesas,sh73a0-cmt1" may be used instead.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add SoC-specific matching for CMT1 on r8a7740 and sh73a0.
This allows us to move away from the old DT bindings such as
- "renesas,cmt-48-sh73a0"
- "renesas,cmt-48-r8a7740"
- "renesas,cmt-48"
in favour for the now commonly used format "renesas,<soc>-<device>"
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Deferred probe is an expected return value on many platforms and so
there's no need to output a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
