| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Rather large, but nothing exiting:
- new range check for settimeofday() to prevent that boot time
becomes negative.
- fix for file time rounding
- a few simplifications of the hrtimer code
- fix for the proc/timerlist code so the output of clock realtime
timers is accurate
- more y2038 work
- tree wide conversion of clockevent drivers to the new callbacks"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
hrtimer: Handle failure of tick_init_highres() gracefully
hrtimer: Unconfuse switch_hrtimer_base() a bit
hrtimer: Simplify get_target_base() by returning current base
hrtimer: Drop return code of hrtimer_switch_to_hres()
time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
time: Introduce current_kernel_time64()
time: Introduce struct itimerspec64
time: Add the common weak version of update_persistent_clock()
time: Always make sure wall_to_monotonic isn't positive
time: Fix nanosecond file time rounding in timespec_trunc()
timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
cris/time: Migrate to new 'set-state' interface
kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
xtensa/time: Migrate to new 'set-state' interface
unicore/time: Migrate to new 'set-state' interface
um/time: Migrate to new 'set-state' interface
sparc/time: Migrate to new 'set-state' interface
sh/localtimer: Migrate to new 'set-state' interface
score/time: Migrate to new 'set-state' interface
s390/time: Migrate to new 'set-state' interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Michael Turquette:
"The clk framework changes for 4.3 are mostly updates to existing
drivers and the addition of new clock drivers. Stephen Boyd has also
done a lot of subsystem-wide driver clean-ups (thanks!). There are
also fixes to the framework core and changes to better split clock
provider drivers from clock consumer drivers"
* tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: s5pv210: add missing call to samsung_clk_of_add_provider()
clk: pistachio: correct critical clock list
clk: pistachio: Fix PLL rate calculation in integer mode
clk: pistachio: Fix override of clk-pll settings from boot loader
clk: pistachio: Fix 32bit integer overflows
clk: tegra: Fix some static checker problems
clk: qcom: Fix MSM8916 prng clock enable bit
clk: Add missing header for 'bool' definition to clk-conf.h
drivers/clk: appropriate __init annotation for const data
clk: rockchip: register pll mux before pll itself
clk: add bindings for the Ux500 clocks
clk/ARM: move Ux500 PRCC bases to the device tree
clk: remove duplicated code with __clk_set_parent_after
clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
clk: Constify clk_hw argument to provider APIs
clk: Hi6220: add stub clock driver
dt-bindings: clk: Hi6220: Document stub clock driver
dt-bindings: arm: Hi6220: add doc for SRAM controller
clk: atlas7: fix pll missed divide NR in fraction mode
clk: atlas7: fix bit field and its root clk for coresight_tpiu
...
|
|
Commit 6dd747825b20 ("ARM: imx: move timer resources into a structure")
moved initialization parameters into a data structure, but neglected to set
the irq field in that data structure for non-DT boots. This causes the system
to hang if a non-DT boot is attempted.
Fixes: 6dd747825b20 ("ARM: imx: move timer resources into a structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Migrate h8300_timer8 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Traceback in -next due to commit 'clockevents/drivers/sh_tmu: Migrate to new
'set-state' interface'.
Commit ("clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface")
in -next causes the following traceback. This is seen with qemu runs for the sh
target.
------------[ cut here ]------------
WARNING: at drivers/clocksource/sh_tmu.c:202
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc3-next-20150720 #1
task: 8c411ed8 ti: 8c40e000 task.ti: 8c40e000
PC is at sh_tmu_disable+0x40/0x60
PR is at sh_tmu_clock_event_shutdown+0x8/0x20
PC : 8c271220 SP : 8c40ff10 SR : 400081f1 TEA : 00000000
R0 : 8c271240 R1 : 8fc08cfc R2 : 00000000 R3 : 3fffffff
R4 : 8fc08c00 R5 : 00000001 R6 : 00000002 R7 : ffffffff
R8 : 00000001 R9 : 8fc08c20 R10 : 00000000 R11 : 00000000
R12 : 8c012820 R13 : 00000000 R14 : 00000000
MACH: 3b9ac9ff MACL: 80000000 GBR : 00000000 PR : 8c271248
Call trace:
[<8c065836>] clockevents_switch_state+0x16/0x60
[<8c06588c>] clockevents_shutdown+0xc/0x40
[<8c066330>] tick_check_new_device+0x90/0xc0
[<8c065556>] clockevents_register_device+0x56/0x120
[<8c0662a0>] tick_check_new_device+0x0/0xc0
[<8c27167a>] sh_tmu_probe+0x29a/0x4e0
[<8c18a994>] kasprintf+0x14/0x20
[<8c442782>] early_platform_driver_probe+0x20e/0x2bc
[<8c1fade0>] platform_match+0x0/0x100
[<8c33babc>] printk+0x0/0x24
[<8c434892>] start_kernel+0x32e/0x574
[<8c33babc>] printk+0x0/0x24
[<8c17d320>] strlen+0x0/0x58
[<8c43430c>] unknown_bootoption+0x0/0x1e0
[<8c011024>] _stext+0x24/0x30
---[ end trace cb88537fdc8fa200 ]---
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate timer-sp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
There are few more changes worth noticing:
- The clockevent device was disabled by writing: 'TIMER_CTRL_32BIT |
TIMER_CTRL_IE' to ctrl register earlier. i.e. by un-setting the
TIMER_CTRL_ENABLE bit. Its done by writing zero now and should have
the same effect.
- For shutdown and resume we were writing the same value twice to the
register (to disable the timer), which is fixed now.
- Switching to oneshot mode was divided into two parts earlier:
- Firstly set_mode() was writing:
'TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ONESHOT'
to ctrl register (device not enabled yet)
- Then sp804_set_next_event() was enabling the device by writing
'readl(ctrl) | TIMER_CTRL_ENABLE' to the ctrl register. This was
unnecessarily complicated.
- Change this to: Stop device on set_state_oneshot and configure it in
sp804_set_next_event().
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate timer-imx-gpt driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also drop:
- 'imx_timer.cem': It was caching the last state of the clockevent
device. The same behavior can be achieved by using clockevents state
helpers. These helpers are only required for oneshot mode as
shutdown/resume wouldn't be done twice by the core.
- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
by drivers. The prints are modified to print the set-state functions
name now to debug the driver.
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), all former users of the "sh-cmt-48-gen2" platform device name are
only supported in generic DT-only ARM multi-platform builds. The driver
doesn't need to match platform devices by name anymore, hence remove the
corresponding platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commit d2348fb6fdc6 ("tick: Dynamically set broadcast irq affinity")
adds one excellent feature CLOCK_EVT_FEAT_DYNIRQ to let the core set the
interrupt affinity of the broadcast interrupt to the cpu which has the
earliest expiry time. This patch adds CLOCK_EVT_FEAT_DYNIRQ flag to
avoid unnecessary wakeups and IPIs when the dw_apb_timer is used as
broadcast timer.
A simple test:
~ # rm /tmp/test.sh
~ # cat > /tmp/test.sh
cat /proc/interrupts
for i in `seq 10` ; do sleep $i; done
cat /proc/interrupts
~ # chmod +x /tmp/test.sh
~ # taskset 0x2 /tmp/test.sh
without the patch:
CPU0 CPU1
27: 115 36 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 88 0 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4 f7e81400.i2c
228: 0 0 interrupt-controller 5 f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21 f7e84000.i2c
231: 0 0 interrupt-controller 20 f7e84800.i2c
265: 445 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 0 11 Timer broadcast interrupts
IPI2: 56 104 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 25 27 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
CPU0 CPU1
27: 115 38 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 160 0 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4 f7e81400.i2c
228: 0 0 interrupt-controller 5 f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21 f7e84000.i2c
231: 0 0 interrupt-controller 20 f7e84800.i2c
265: 514 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 0 83 Timer broadcast interrupts
IPI2: 56 104 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 25 46 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
cpu0 get 160-88=72 timer interrupts, CPU1 got 83-11=72 broadcast timer
IPIs
So, overall system got 72+72=144 wake ups and 72 broadcast timer IPIs
With the patch:
CPU0 CPU1
27: 107 37 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 66 7 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4 f7e81400.i2c
228: 0 0 interrupt-controller 5 f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21 f7e84000.i2c
231: 0 0 interrupt-controller 20 f7e84800.i2c
265: 311 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 2 4 Timer broadcast interrupts
IPI2: 58 100 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 21 24 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
CPU0 CPU1
27: 107 39 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 69 75 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4 f7e81400.i2c
228: 0 0 interrupt-controller 5 f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21 f7e84000.i2c
231: 0 0 interrupt-controller 20 f7e84800.i2c
265: 380 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 3 6 Timer broadcast interrupts
IPI2: 60 100 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 21 45 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
cpu0 got 69-66=3, cpu1 got 75-7=68 timer interrupts. cpu0 got 3-2=1
broadcast timer IPIs, cpu1 got 6-4=2 broadcast timer IPIs.
So, overall system got 3+68+1+2=74 wakeups and 1+2=3 broadcast timer
IPIs
This patch removes 50% wakeups and almost 100% broadcast timer IPIs!
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate exynos_mct driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate tcb_clksrc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate zevio driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate vt8500 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate vf_pit driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jingchang Lu <b35083@freescale.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stefan Agner <stefan@agner.ch>
|
|
Migrate u300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Migrate sun5i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Migrate stm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
|
Migrate prima2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate keystone driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also pass the mode-mask to keystone_timer_config() instead of the mode
as mode macro's aren't valid anymore.
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate integrator driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
For oneshot mode the clkevt device was first getting disabled by
clearing TIMER_CTRL_ENABLE bits in TIMER_CTRL register, followed by
clearing TIMER_CTRL_PERIODIC bit. Both these are done with a single
write operation now.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Migrate digicolor driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
|
|
Migrate atmel-st driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Migrate atmel driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Migrate atlas7 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate efm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
There is nothing to be done for resume state and so isn't implemented.
Cc: Uwe Kleine-König <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate time-armada-370-xp driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate tegra20 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Thierry Reding <treding@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate sun4i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Migrate sh_tmu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Migrate sh_mtu2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Migrate sh_cmt driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Migrate samsung_pwm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate rockchip driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything for oneshot or resume modes, and so the
callbacks aren't provided.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate qcom driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Periodic mode isn't supported by the driver and so the callback isn't
provided anymore.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Migrate pxa driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Both oneshot and shutdown modes had exactly same code and so only a
single callback is sufficient now, which will be called for both the
modes.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
Migrate nomadik-mtu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Migrate mxs driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also drop:
- 'mxs_clockevent_mode': as we have helpers available from core for the
same.
same state twice and so perhaps the check wasn't required.
- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
by drivers and it was used just to print old-state:new-state. The
debug prints are called from mxs_irq_clear() now based on the
state-name passed to it. The printed name will be same for shutdown
and resume states as they use the same callback pointer.
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate mtk driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate moxart driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate mips-gic driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate metag_generic driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. Even the WARN()
for periodic or unused modes isn't required anymore as the core is
taking care of that now. So, this patch doesn't provide any set-state
callbacks.
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate meson6 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Carlo Caione <carlo@caione.org>
|
|
Migrate i8253 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate fsl_ftm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate dw_apb driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate dummy_timer driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumae <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate clps711x driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Migrate cadence_ttc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
|
