| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.18-rc1 fron Viresh Kumar:
"- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml
binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers
(Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
cpufreq: qcom-hw: Add support for per-core-dcvs
cpufreq: CPPC: Fix performance/frequency conversion
cpufreq: Add i.MX7S to cpufreq-dt-platdev blocklist
ARM: dts: imx7s: Define operating points table for cpufreq
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
cpufreq: replace cpumask_weight with cpumask_empty where appropriate
|
|
Merge power management utilities changes for 5.18-rc1:
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
* pm-tools:
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
turbostat: fix PC6 displaying on some systems
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
tools/power/cpupower/{ToDo => TODO}: Rename the todo file
tools: cpupower: fix typo in cpupower-idle-set(1) manpage
|
|
The powernow-k8 driver will do checks at startup that the current
active driver is acpi-cpufreq and show a warning when they're not
expected.
Because of this the following warning comes up on systems that
support amd-pstate and compiled in both drivers:
`WTF driver: amd-pstate`
The systems that support powernow-k8 will not support amd-pstate,
so re-order the checks to validate the CPU model number first to
avoid this warning being displayed on modern SOCs.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For some specific platforms (E.g. AlderLake) the balance performance
EPP is updated from the hard coded value in the driver. This acts as
the default and balance_performance EPP. The purpose of this EPP
update is to reach maximum 1 core turbo frequency (when possible) out
of the box.
Although we can achieve the objective by using hard coded value in the
driver, there can be other EPP which can be better in terms of power.
But that will be very subjective based on platform and use cases.
This is not practical to have a per platform specific default hard coded
in the driver.
If a platform wants to specify default EPP, it can be set in the firmware.
If this EPP is not the chipset default of 0x80 (balance_perf_epp unless
driver changed it) and more performance oriented but not 0, the driver
can use this as the default and balanced_perf EPP. In this case no driver
update is required every time there is some new platform and default EPP.
If the firmware didn't update the EPP from the chipset default then
the hard coded value is used as per existing implementation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Usually, sysfs attributes have .show and .store and their naming
convention is filename_show() and filename_store().
But in cpufreq the naming convention of these functions is
show_filename() and store_filename() which prevents __ATTR_RW() and
__ATTR_RO() from being used in there to simplify code.
Accordingly, change the naming convention of the sysfs .show and
.store methods in cpufreq to follow the one expected by __ATTR_RW()
and __ATTR_RO() and use these macros in that code.
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add frequency, mperf, aperf and tsc in the trace. This can be used
to debug and tune the performance of AMD P-state driver.
Use the time difference between amd_pstate_update to calculate CPU
frequency. There could be sleep in arch_freq_get_on_cpu, so do not
use it here.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Co-developed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
The Qualcomm sc8280xp and sa8540p platforms also uses the
qcom-cpufreq-hw driver, so add them to the cpufreq-dt-platdev driver's
blocklist.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OSM and EPSS hardware controls the frequency of each cluster in the
system based on requests from the OS and various limiting factors, such
as input from LMH.
In most systems the vote from the OS is done using a single register per
cluster, but some systems are configured to instead take one request per
core. In this configuration a set of consecutive registers are used for
the OS to request the frequency of each of the cores within the cluster.
The information is then aggregated in the hardware and the frequency for
the cluster is determined.
As the current implementation ends up only requesting a frequency for
the first core in each cluster and only the vote of non-idle cores are
considered it's often the case that the cluster will be clocked (much)
lower than expected.
It's possible that there are benefits of performing the per-core
requests from the OS, but more investigation of the outcome is needed
before introducing such support. As such this patch extends the request
for the cluster to be written to all the cores.
The weight of the policy's related_cpus is used to determine how many
cores, and hence consecutive registers, each cluster has.
The OS is not permitted to disable the per-core dcvs feature.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
CPUfreq governors request CPU frequencies using information
on current CPU usage. The CPPC driver converts them to
performance requests. Frequency targets are computed as:
target_freq = (util / cpu_capacity) * max_freq
target_freq is then clamped between [policy->min, policy->max].
The CPPC driver converts performance values to frequencies
(and vice-versa) using cppc_cpufreq_perf_to_khz() and
cppc_cpufreq_khz_to_perf(). These functions both use two different
factors depending on the range of the input value. For
cppc_cpufreq_khz_to_perf():
- (NOMINAL_PERF / NOMINAL_FREQ) or
- (LOWEST_PERF / LOWEST_FREQ)
and for cppc_cpufreq_perf_to_khz():
- (NOMINAL_FREQ / NOMINAL_PERF) or
- ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))
This means:
1- the functions are not inverse for some values:
(perf_to_khz(khz_to_perf(x)) != x)
2- cppc_cpufreq_perf_to_khz(LOWEST_PERF) can sometimes give
a different value from LOWEST_FREQ due to integer approximation
3- it is implied that performance and frequency are proportional
(NOMINAL_FREQ / NOMINAL_PERF) == (LOWEST_PERF / LOWEST_FREQ)
This patch changes the conversion functions to an affine function.
This fixes the 3 points above.
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The i.MX 7Solo currently does not have multiple operating points,
however, in order for the i.MX Thermal driver to successfully probe
a cpufreq device is required. Add it to the cpufreq-dt-platdev
driver's blocklist to allow using imx-cpufreq-dt.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
drivers/cpufreq calls cpumask_weight() to check if any bit of a given
cpumask is set. We can do it more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In the event that the SoC is under thermal pressure while booting it's
possible for the dcvs notification to happen inbetween the cpufreq
framework calling init and it actually updating the policy's
related_cpus cpumask.
Prior to the introduction of the thermal pressure update helper an empty
cpumask would simply result in the thermal pressure of no cpus being
updated, but the new code will attempt to dereference an invalid per_cpu
variable.
Avoid this problem by using the newly reintroduced "ready" callback, to
postpone enabling the IRQ until the related_cpus cpumask is filled in.
Fixes: 0258cb19c77d ("cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This effectively revert '4bf8e582119e ("cpufreq: Remove ready()
callback")', in order to reintroduce the ready callback.
This is needed in order to be able to leave the thermal pressure
interrupts in the Qualcomm CPUfreq driver disabled during
initialization, so that it doesn't fire while related_cpus are still 0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Viresh: Added the Chinese translation as well and updated commit msg ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
So it can be reused by other codes.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The AMD P-State driver is based on ACPI CPPC function, so ACPI should be
dependence of this driver in the kernel config.
In file included from ../drivers/cpufreq/amd-pstate.c:40:0:
../include/acpi/processor.h:226:2: error: unknown type name ‘phys_cpuid_t’
phys_cpuid_t phys_id; /* CPU hardware ID such as APIC ID for x86 */
^~~~~~~~~~~~
../include/acpi/processor.h:355:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
CC drivers/rtc/rtc-rv3029c2.o
../include/acpi/processor.h:356:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
phys_cpuid_t acpi_map_madt_entry(u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
../include/acpi/processor.h:357:20: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
See https://lore.kernel.org/lkml/20e286d4-25d7-fb6e-31a1-4349c805aae3@infradead.org/.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the description of @req and @boost_supported in struct amd_cpudata
kernel-doc comment to remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member
'req' not described in 'amd_cpudata'
drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member
'boost_supported' not described in 'amd_cpudata'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce sysfs attributes to get the different level AMD P-State
performances.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce sysfs attributes to get the different level processor
frequencies.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the sbios supports the boost mode of AMD P-State, let's switch to
boost enabled by default.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add trace event to monitor the performance value changes which is
controlled by cpu governors.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
memory solution
In some of Zen2 and Zen3 based processors, they are using the shared
memory that exposed from ACPI SBIOS. In this kind of the processors,
there is no MSR support, so we add acpi cppc function as the backend for
them.
It is using a module param (shared_mem) to enable related processors
manually. We will enable this by default once we address performance
issue on this solution.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the fast switch function for AMD P-State on the AMD processors
which support the full MSR register control. It's able to decrease the
latency on interrupt context.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
processors
AMD P-State is the AMD CPU performance scaling driver that introduces a
new CPU frequency control mechanism on AMD Zen based CPU series in Linux
kernel. The new mechanism is based on Collaborative processor
performance control (CPPC) which is finer grain frequency management
than legacy ACPI hardware P-States. Current AMD CPU platforms are using
the ACPI P-states driver to manage CPU frequency and clocks with
switching only in 3 P-states. AMD P-State is to replace the ACPI
P-states controls, allows a flexible, low-latency interface for the
Linux kernel to directly communicate the performance hints to hardware.
AMD P-State leverages the Linux kernel governors such as *schedutil*,
*ondemand*, etc. to manage the performance hints which are provided by CPPC
hardware functionality. The first version for AMD P-State is to support one
of the Zen3 processors, and we will support more in future after we verify
the hardware and SBIOS functionalities.
There are two types of hardware implementations for AMD P-State: one is full
MSR support and another is shared memory support. It can use
X86_FEATURE_CPPC feature flag to distinguish the different types.
Using the new AMD P-State method + kernel governors (*schedutil*,
*ondemand*, ...) to manage the frequency update is the most appropriate
bridge between AMD Zen based hardware processor and Linux kernel, the
processor is able to adjust to the most efficiency frequency according to
the kernel scheduler loading.
Please check the detailed CPU feature and MSR register description in
Processor Programming Reference (PPR) for AMD Family 19h Model 51h,
Revision A1 Processors:
https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar:
"- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd,
and Vladimir Zapolskiy).
- Fixes double devm_remap for mediatek driver (Hector Yuan).
- Introduces thermal pressure helpers (Lukasz Luba)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: qcom-hw: Use optional irq API
cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts
cpufreq: qcom-hw: Fix probable nested interrupt handling
cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name
arch_topology: Remove unused topology_set_thermal_pressure() and related
cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
thermal: cpufreq_cooling: Use new thermal pressure update function
arch_topology: Introduce thermal pressure update function
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the cpufreq code to use default_groups field which has been
the preferred way since aa30f47cf666 ("kobject: Add support for default
attribute groups to kobj_type") so that we can soon get rid of the
obsolete default_attrs field.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When hotpluging policy cpu, cpu policy init will be called multiple times.
Unplug CPU7 -> CPU6 -> CPU5 -> CPU4, then plug CPU4 again.
In this case, devm_remap will double remap and resource allocate fail.
So replace devm_remap to ioremap and release resources in cpu policy exit.
Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
With HWP enabled, when the turbo range of performance levels is
disabled by the platform firmware, the CPU capacity is given by
the "guaranteed performance" field in MSR_HWP_CAPABILITIES which
is generally dynamic. When it changes, the kernel receives an HWP
notification interrupt handled by notify_hwp_interrupt().
When the "guaranteed performance" value changes in the above
configuration, the CPU performance scaling needs to be adjusted so
as to use the new CPU capacity in computations, which means that
the cpuinfo.max_freq value needs to be updated for that CPU.
Accordingly, modify intel_pstate_notify_work() to read
MSR_HWP_CAPABILITIES and update cpuinfo.max_freq to reflect the
new configuration (this update can be carried out even if the
configuration doesn't actually change, because it simply doesn't
matter then and it takes less time to update it than to do extra
checks to decide whether or not a change has really occurred).
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is an expectation from users that they can get frequency specified
by cpufreq/cpuinfo_max_freq when conditions permit. But with AlderLake
mobile it may not be possible. This is possible that frequency is clipped
based on the system power-up EPP value. In this case users can update
cpufreq/energy_performance_preference to some performance oriented EPP to
limit clipping of frequencies.
To get out of box behavior as the prior generations of CPUs, update EPP
for AlderLake mobile CPUs on boot. On prior generations of CPUs EPP = 128
was enough to get maximum frequency, but with AlderLake mobile the
equivalent EPP is 102. Since EPP is model specific, this is possible that
they have different meaning on each generation of CPU.
The current EPP string "balance_performance" corresponds to EPP = 128.
Change the EPP corresponding to "balance_performance" to 102 for only
AlderLake mobile CPUs and update this on each CPU during boot.
To implement reuse epp_values[] array and update the modified EPP at the
index for BALANCE_PERFORMANCE. Add a dummy EPP_INDEX_DEFAULT to
epp_values[] to match indexes in the energy_perf_strings[].
After HWP PM is enabled also update EPP when "balance_performance" is
redefined for the very first time after the boot on each CPU. On
subsequent suspend/resume or offline/online the old EPP is restored,
so no specific action is needed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is not necessary to call intel_pstate_get_hwp_cap() from
intel_pstate_update_perf_limits(), because it gets called from
intel_pstate_verify_cpu_policy() which is either invoked directly
right before intel_pstate_update_perf_limits(), in
intel_cpufreq_verify_policy() in the passive mode, or called
from driver callbacks in a sequence that causes it to be followed
by an immediate intel_pstate_update_perf_limits().
Namely, in the active mode intel_cpufreq_verify_policy() is called
by intel_pstate_verify_policy() which is the ->verify() callback
routine of intel_pstate and gets called by the cpufreq core right
before intel_pstate_set_policy(), which is the driver's ->setoplicy()
callback routine, where intel_pstate_update_perf_limits() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use platform_get_irq_optional() to avoid a noisy error message when the
irq isn't specified. The irq is definitely optional given that we only
care about errors that are -EPROBE_DEFER here.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make the comment in blocking_notifier_call_chain() easier to
understand.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When I hot added a CPU, I found 'cpufreq' directory was not created
below /sys/devices/system/cpu/cpuX/.
It is because get_cpu_device() failed in add_cpu_dev_symlink().
cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface.
It will be called when the CPU device registered into the system.
The call chain is as follows:
register_cpu()
->device_register()
->device_add()
->bus_probe_device()
->cpufreq_add_dev()
But only after the CPU device has been registered, we can get the
CPU device by get_cpu_device(), otherwise it will return NULL.
Since we already have the CPU device in cpufreq_add_dev(), pass
it to add_cpu_dev_symlink().
I noticed that the 'kobj' of the CPU device has been added into
the system before cpufreq_add_dev().
Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In runtime CPU cluster specific dcvsh interrupts may be handled on
unrelated CPU cores, it leads to an issue of too excessive number of
received and handled interrupts, but this is not observed, if CPU
affinity of the interrupt handler is set in accordance to CPU clusters.
The change reduces a number of received interrupts in about 10-100 times.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Re-enabling an interrupt from its own interrupt handler may cause
an interrupt storm, if there is a pending interrupt and because its
handling is disabled due to already done entrance into the handler
above in the stack.
Also, apparently it is improper to lock a mutex in an interrupt contex.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Registering an IRQ requires the string buffer containing the name to
remain allocated, as the name is not copied into another buffer.
So let's add a irq_name field to the data struct instead, which is
guaranteed to have the appropriate lifetime.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
On systems with overclocking enabled, CPPC Highest Performance can be
hard coded to 0xff. In this case even if we have cores with different
highest performance, ITMT can't be enabled as the current implementation
depends on CPPC Highest Performance.
On such systems we can use MSR_HWP_CAPABILITIES maximum performance field
when CPPC.Highest Performance is 0xff.
Due to legacy reasons, we can't solely depend on MSR_HWP_CAPABILITIES as
in some older systems CPPC Highest Performance is the only way to identify
different performing cores.
Reported-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 4adcf2e5829f ("cpufreq: intel_pstate: Add ->offline and
->online callbacks") the EPP value set by the "performance" scaling
algorithm in the active mode is not restored after an offline/online
cycle which replaces it with the saved EPP value coming from user
space.
Address this issue by forcing intel_pstate_hwp_set() to set a new
EPP value when it runs first time after online.
Fixes: 4adcf2e5829f ("cpufreq: intel_pstate: Add ->offline and ->online callbacks")
Link: https://lore.kernel.org/linux-pm/adc7132c8655bd4d1c8b6129578e931a14fe1db2.camel@linux.intel.com/
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers
support in no-HWP mode") enabled the use of Intel P-State driver
for Ice Lake servers.
But it doesn't cover the case when OS can't control P-States.
Therefore, for Ice Lake server, if MSR_MISC_PWR_MGMT bits 8 or 18
are enabled, then the Intel P-State driver should exit as OS can't
control P-States.
Fixes: fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Thermal pressure provides a new API, which allows to use CPU frequency
as an argument. That removes the need of local conversion to capacity.
Use this new API and remove old local conversion code.
The new arch_update_thermal_pressure() also accepts boost frequencies,
which solves issue in the driver code with wrong reduced capacity
calculation. The reduced capacity was calculated wrongly due to
'policy->cpuinfo.max_freq' used as a divider. The value present there was
actually the boost frequency. Thus, even a normal maximum frequency value
which corresponds to max CPU capacity (arch_scale_cpu_capacity(cpu_id))
is not able to remove the capping.
The second side effect which is solved is that the reduced frequency wasn't
properly translated into the right reduced capacity,
e.g.
boost frequency = 3000MHz (stored in policy->cpuinfo.max_freq)
max normal frequency = 2500MHz (which is 1024 capacity)
2nd highest frequency = 2000MHz (which translates to 819 capacity)
Then in a scenario when the 'throttled_freq' max allowed frequency was
2000MHz the driver translated it into 682 capacity:
capacity = 1024 * 2000 / 3000 = 682
Then set the pressure value bigger than actually applied by the HW:
max_capacity - capacity => 1024 - 682 = 342 (<- thermal pressure)
Which was causing higher throttling and misleading task scheduler
about available CPU capacity.
A proper calculation in such case should be:
capacity = 1024 * 2000 / 2500 = 819
1024 - 819 = 205 (<- thermal pressure)
This patch relies on the new arch_update_thermal_pressure() handling
correctly such use case (with boost frequencies).
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when there is throttling
or throttling is removed.
Fixes: 275157b367f479 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It is possible that some performance excursions happened before OS boot
or enable HWP interrupts. So clear MSR_HWP_STATUS bits when we enable
HWP interrupt. In this way a next excursion will results in a HWP
interrupt.
The status bits of MSR_HWP_STATUS must be cleared (0) by software so
that a new status condition change will cause the hardware to set the
bit again and issue the notification.
Fixes: 57577c996d73 ("cpufreq: intel_pstate: Process HWP Guaranteed change notification")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible that on some platforms HWP interrupts are disabled. In
that case accessing MSR 0x773 will result in warning.
So check X86_FEATURE_HWP_NOTIFY feature to access MSR 0x773. The other
places in code where this MSR is accessed, already checks this feature
except during disable path called during cpufreq offline and suspend
callbacks.
Fixes: 57577c996d73 ("cpufreq: intel_pstate: Process HWP Guaranteed change notification")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the
->adjust_perf() callback") caused intel_pstate to use nonzero HWP
desired values in certain usage scenarios, but it did not prevent
them from being leaked into the confugirations in which HWP desired
is expected to be 0.
The failing scenarios are switching the driver from the passive
mode to the active mode and starting a new kernel via kexec() while
intel_pstate is running in the passive mode.
To address this issue, ensure that HWP desired will be cleared on
offline and suspend/shutdown.
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge Energy Model and power capping updates for 5.16-rc1:
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
* pm-em:
cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
PM: EM: Mark inefficiencies in CPUFreq
cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
cpufreq: Introducing CPUFREQ_RELATION_E
cpufreq: Add an interface to mark inefficient frequencies
cpufreq: Make policy min/max hard requirements
PM: EM: Allow skipping inefficient states
PM: EM: Extend em_perf_domain with a flag field
PM: EM: Mark inefficient states
PM: EM: Fix inefficient states detection
* powercap:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.16-rc1 from Viresh Kumar:
"- Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).
- Fix the parameter usage of the newly added perf-domain API (Hector
Yuan).
- Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
Guenter Roeck, and Arnd Bergmann)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: Fix parameter in parse_perf_domain()
cpufreq: tegra186/tegra194: Handle errors in BPMP response
cpufreq: remove useless INIT_LIST_HEAD()
cpufreq: s3c244x: add fallthrough comments for switch
cpufreq: vexpress: Drop unused variable
|
|
Fix a problem in active mode that cpu->pstate.turbo_freq is initialized
only if HWP-to-frequency scaling factor is refined.
In passive mode, this problem is not exposed, because
cpu->pstate.turbo_freq is set again, later in
intel_cpufreq_cpu_init()->intel_pstate_get_hwp_cap().
Fixes: eb3693f0521e ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
