| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
|
|
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM soc platform updates from Olof Johansson:
"This branch contains updates to OMAP and Marvell platforms (kirkwood,
dove, mvebu) that came in after we had done the big multiplatform
merges, so they were kept separate from the rest, and not separated
into the traditional topics of cleanup/driver/platform features.
For OMAP, the updates are:
- Runtime PM conversions for the GPMC and RNG IP blocks
- Preparation patches for the OMAP common clock framework conversion
- clkdev alias additions required by other drivers
- Performance Monitoring Unit (PMU) support for OMAP2, 3, and
non-4430 OMAP4
- OMAP hwmod code and data improvements
- Preparation patches for the IOMMU runtime PM conversion
- Preparation patches for OMAP4 full-chip retention support
For Kirkwood/Dove/mvebu:
- New driver for "address decoder controller" for mvebu, which is a
piece of hardware that configures addressable devices and
peripherals. First user is the boot rom aperture on armada XP
since it is needed for SMP support.
- New device tree bindings for peripherals such as gpio-fan, iconnect
nand, mv_cesa and the above address decoder controller.
- Some defconfig updates, mostly to enable new DT boards and a few
drivers.
- New drivers using the pincontrol subsystem for dove, kirkwood and
mvebu
- New clean gpio driver for mvebu"
* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
ARM: mvebu: fix build breaks from multi-platform conversion
ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
ARM: OMAP2+: PMU: Add runtime PM support
ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
ARM: OMAP3: hwmod data: Add debugss HWMOD data
ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
hwrng: OMAP: remove SoC restrictions from driver registration
ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
hwrng: OMAP: convert to use runtime PM
hwrng: OMAP: store per-device data in per-device variables, not file statics
ARM: OMAP2xxx: hwmod/CM: add RNG integration data
ARM: OMAP2+: gpmc: minimal driver support
ARM: OMAP2+: gpmc: Adapt to HWMOD
ARM: OMAP2/3: hwmod data: add gpmc
ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
ARM: OMAP3: hwmod data: add mmu data for iva and isp
ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
"Some highlights in addition to the usual batch of fixes:
- 64TB address space support for 64-bit processes by Aneesh Kumar
- Gavin Shan did a major cleanup & re-organization of our EEH support
code (IBM fancy PCI error handling & recovery infrastructure) which
paves the way for supporting different platform backends, along
with some rework of the PCIe code for the PowerNV platform in order
to remove home made resource allocations and instead use the
generic code (which is possible after some small improvements to it
done by Gavin).
- Uprobes support by Ananth N Mavinakayanahalli
- A pile of embedded updates from Freescale folks, including new SoC
and board supports, more KVM stuff including preparing for 64-bit
BookE KVM support, ePAPR 1.1 updates, etc..."
Fixup trivial conflicts in drivers/scsi/ipr.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
powerpc/iommu: Fix multiple issues with IOMMU pools code
powerpc: Fix VMX fix for memcpy case
driver/mtd:IFC NAND:Initialise internal SRAM before any write
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
powerpc: Remove tlb batching hack for nighthawk
powerpc: Set paca->data_offset = 0 for boot cpu
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
powerpc/mpc85xx: Update interrupt handling for IFC controller
powerpc/85xx: Enable USB support in p1023rds_defconfig
powerpc/smp: Do not disable IPI interrupts during suspend
powerpc/eeh: Fix crash on converting OF node to edev
powerpc/eeh: Lock module while handling EEH event
powerpc/kprobe: Don't emulate store when kprobe stwu r1
powerpc/kprobe: Complete kprobe and migrate exception frame
powerpc/kprobe: Introduce a new thread flag
powerpc: Remove unused __get_user64() and __put_user64()
powerpc/eeh: Global mutex to protect PE tree
powerpc/eeh: Remove EEH PE for normal PCI hotplug
...
|
|
Pull crypto update from Herbert Xu:
- Optimised AES/SHA1 for ARM.
- IPsec ESN support in talitos and caam.
- x86_64/avx implementation of cast5/cast6.
- Add/use multi-algorithm registration helpers where possible.
- Added IBM Power7+ in-Nest support.
- Misc fixes.
Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto
config options being added next to the new ARM ones.
[ Side note: cut-and-paste duplicate help texts make those conflicts
harder to read than necessary, thanks to git being smart about
minimizing conflicts and maximizing the common parts... ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: x86/glue_helper - fix storing of new IV in CBC encryption
crypto: cast5/avx - fix storing of new IV in CBC encryption
crypto: tcrypt - add missing tests for camellia and ghash
crypto: testmgr - make test_aead also test 'dst != src' code paths
crypto: testmgr - make test_skcipher also test 'dst != src' code paths
crypto: testmgr - add test vectors for CTR mode IV increasement
crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6)
crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template
crypto: caam - increase TRNG clocks per sample
crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable()
crypto: tegra-aes - fix error return code
crypto: crypto4xx - fix error return code
crypto: hifn_795x - fix error return code
crypto: ux500 - fix error return code
crypto: caam - fix error IDs for SEC v5.x RNG4
hwrng: mxc-rnga - Access data via structure
hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework
crypto: caam - add IPsec ESN support
crypto: 842 - remove .cra_list initialization
Revert "[CRYPTO] cast6: inline bloat--"
...
|
|
Pull sparc updates from David Miller:
"Largely this is simply adding support for the Niagara 4 cpu.
Major areas are perf events (chip now supports 4 counters and can
monitor any event on each counter), crypto (opcodes are availble for
sha1, sha256, sha512, md5, crc32c, AES, DES, CAMELLIA, and Kasumi
although the last is unsupported since we lack a generic crypto layer
Kasumi implementation), and an optimized memcpy.
Finally some cleanups by Peter Senna Tschudin."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (47 commits)
sparc64: Fix trailing whitespace in NG4 memcpy.
sparc64: Fix comment type in NG4 copy from user.
sparc64: Add SPARC-T4 optimized memcpy.
drivers/sbus/char: removes unnecessary semicolon
arch/sparc/kernel/pci_sun4v.c: removes unnecessary semicolon
sparc64: Fix function argument comment in camellia_sparc64_key_expand asm.
sparc64: Fix IV handling bug in des_sparc64_cbc_decrypt
sparc64: Add auto-loading mechanism to crypto-opcode drivers.
sparc64: Add missing pr_fmt define to crypto opcode drivers.
sparc64: Adjust crypto priorities.
sparc64: Use cpu_pgsz_mask for linear kernel mapping config.
sparc64: Probe cpu page size support more portably.
sparc64: Support 2GB and 16GB page sizes for kernel linear mappings.
sparc64: Fix bugs in unrolled 256-bit loops.
sparc64: Avoid code duplication in crypto assembler.
sparc64: Unroll CTR crypt loops in AES driver.
sparc64: Unroll ECB decryption loops in AES driver.
sparc64: Unroll ECB encryption loops in AES driver.
sparc64: Add ctr mode support to AES driver.
sparc64: Move AES driver over to a methods based implementation.
...
|
|
we need to configure the TRNG to use more clocks per sample
to handle the two back-to-back 64KiB random descriptor requests
on higher frequency P5040s.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Arun Murthy <arunrmurthy83@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
According to SEC v5.0-v5.3 reference manuals.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
into late/kirkwood
From Jason Cooper:
New bindings:
- iconnect nand and keys
- mv_cesa
- gpio-fan
* 'kirkwood/dt' of git://git.infradead.org/users/jcooper/linux:
ARM: kirkwood: Use devicetree to define DNS-32[05] fan
hwmon: Add devicetree bindings to gpio-fan
Crypto: CESA: Add support for DT based instantiation.
ARM: Kirkwood: Describe iconnect nand in DT.
ARM: Kirkwood: Describe iconnect keys in DT.
|
|
Based on work by Michael Walle and Jason Cooper.
Added support for getting the interrupt number and address of SRAM
from DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Conflicts:
arch/arm/mach-kirkwood/board-dt.c
|
|
* multiplatform/platform-data:
ARM: spear: move platform_data definitions
ARM: samsung: move platform_data definitions
ARM: orion: move platform_data definitions
ARM: nomadik: move platform_data definitions
ARM: w90x900: move platform_data definitions
ARM: vt8500: move platform_data definitions
ARM: tegra: move sdhci platform_data definition
ARM: sa1100: move platform_data definitions
ARM: pxa: move platform_data definitions
ARM: netx: move platform_data definitions
ARM: msm: move platform_data definitions
ARM: imx: move platform_data definitions
ARM: ep93xx: move platform_data definitions
ARM: davinci: move platform_data definitions
ARM: at91: move platform_data definitions
Conflicts due to removed files:
arch/arm/mach-tegra/board-harmony.c
arch/arm/mach-tegra/board-trimslice.c
Conflicts due to code removal:
arch/arm/mach-tegra/board-paz00.c
Context conflicts in:
drivers/mmc/host/sdhci-tegra.c
drivers/net/irda/pxaficp_ir.c
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Make the crypto opcode implementations have a higher priority than
those provides by the ring buffer based Niagara crypto device.
Also, several crypto opcode hashes were not setting the priority value
at all.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.
This moves such data out of the nomadik include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andreas Westin <andreas.westin@stericsson.com>
|
|
Pull crypto fixes from Herbert Xu:
"This fixes the authenc self-test crash as well as a missing export of
a symbol used by a module."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: authenc - Fix crash with zero-length assoc data
crypto/caam: Export gen_split_key symbol for other modules
|
|
Brings in various bug fixes from 3.6-rcX
|
|
Support for ESNs (extended sequence numbers).
Tested with strongswan by connecting back-to-back P1010RDB with P2020RDB.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
module_pci_driver makes the code simpler by eliminating
module_init and module_exit calls.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
use true/false for bool, fix code alignment, and fix two allocs with
no test.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In 3.6-rc3, without this patch, the following error occurs with a modular build:
ERROR: "gen_split_key" [drivers/crypto/caam/caamhash.ko] undefined!
ERROR: "gen_split_key" [drivers/crypto/caam/caamalg.ko] undefined!
Signed-off-by: Ben Collins <ben.c@servergy.com>
Cc: Yuan Kang <Yuan.Kang@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
driver
phys_to_abs() is a nop, don't use it.
virt_to_abs() is just a wrapper around __pa(), call __pa() directly.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Support for ESNs (extended sequence numbers).
Tested with strongswan on a P2020RDB back-to-back setup.
Extracted from /etc/ipsec.conf:
esp=aes-sha1-esn-modp4096!
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Generate a link table in case assoc data is a scatterlist.
While at it, add support for handling non-contiguous assoc data and iv.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It's more natural to think of these vars as bool rather than int.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
talitos_edesc_alloc does not need hash_result param.
Checking whether dst scatterlist is NULL or not is all that is required.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For IPsec encryption, in the case when:
-the input buffer is fragmented (edesc->src_nents > 0)
-the output buffer is not fragmented (edesc->dst_nents = 0)
the ICV is not output in the link table, but after the encrypted payload.
Copying the ICV must be avoided in this case; consequently the condition
edesc->dma_len > 0 must be more specific, i.e. must depend on the type
of the output buffer - fragmented or not.
Testing was performed by modifying testmgr to support src != dst,
since currently native kernel IPsec does in-place encryption
(src == dst).
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
the entry points and geniv definitions for all aead,
ablkcipher, and hash algorithms are all common; move them to a
single assignment in talitos_alg_alloc().
This assumes it's ok to assign a setkey() on non-hmac algs.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
lighten driver_algs[] by moving them to talitos_alg_alloc().
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a build error on 32-bit archs in the hifn driver as
well as a potential deadlock in the caam driver."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix possible deadlock condition
crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs
|
|
commit "crypto: caam - use non-irq versions of spinlocks for job rings"
made two bad assumptions:
(a) The caam_jr_enqueue lock isn't used in softirq context.
Not true: jr_enqueue can be interrupted by an incoming net
interrupt and the received packet may be sent for encryption,
via caam_jr_enqueue in softirq context, thereby inducing a
deadlock.
This is evidenced when running netperf over an IPSec tunnel
between two P4080's, with spinlock debugging turned on:
[ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70
[ 892.098747] Call Trace:
[ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50
[ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8
[ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70
[ 892.129629] Call Trace:
[ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50
[ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8
[ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334
[ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818
[ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408
[ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898
[ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c
[ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94
[ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4
[ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0
[ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24
[ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104
[ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8
[ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0
[ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18
[ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0
[ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430
[ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84
[ 892.281474]
[ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334
[ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818
[ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408
[ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898
[ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c
[ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94
[ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4
[ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0
[ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24
[ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104
[ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8
[ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0
[ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18
[ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70
[ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570
[ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0
[ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28
[ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98
[ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98
[ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490
[ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4
[ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04
[ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec
[ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164
[ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc
[ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc
[ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c
[ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c
(b) since the caam_jr_dequeue lock is only used in bh context,
then semantically it should use _bh spin_lock types. spin_lock_bh
semantics are to disable back-halves, and used when a lock is shared
between softirq (bh) context and process and/or h/w IRQ context.
Since the lock is only used within softirq context, and this tasklet
is atomic, there is no need to do the additional work to disable
back halves.
This patch adds back-half disabling protection to caam_jr_enqueue
spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b).
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit bd3c7b5c2aba ("crypto: atmel - add Atmel AES driver") possibly
has a typo error of adding an extra CONFIG_.
CC: Nicolas Royer <nicolas@eukrea.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
virt_to_abs() is just a wrapper around __pa(), use __pa() directly.
We should be including <asm/page.h> to get __pa(). abs_addr.h will be
removed shortly so drop that.
We were getting of.h via abs_addr.h so we need to include that directly.
Having done all that, clean up the ordering of the includes.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the driver for interacting with the 842
compression accelerator on IBM Power7+ systems.
The device is a child of the Platform Facilities Option (PFO)
and shows up as a child of the IBM VIO bus.
The compression/decompression API takes the same arguments
as existing compression methods like lzo and deflate. The 842
hardware operates on 4K hardware pages and the driver breaks up
input on 4K boundaries to submit it to the hardware accelerator.
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch creates a new submenu for the NX cryptographic
hardware accelerator and breaks the NX options into their own
Kconfig file under drivers/crypto/nx/Kconfig.
This will permit additional NX functionality to be easily
and more cleanly added in the future without touching
drivers/crypto/Makefile|Kconfig.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SHARE_WAIT, whilst more optimal for association-less crypto,
has the ability to start thrashing the CCB descriptor/key
caches, given high levels of traffic across multiple security
associations (and thus keys).
Switch to using the SERIAL sharing type, which prefers
the last used CCB for the SA. On a 2-DECO platform
such as the P3041, this can improve performance by
about 3.7%.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In some device trees of previous version, there were string "fsl,sec4.0".
To be backward compatible with device trees, we first check "fsl,sec-v4.0",
if it fails, then check for "fsl,sec4.0".
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
extended to include new hash and rng code, which was omitted from
the previous version of this patch during a rebase of the SDK
version.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
commit "crypto: caam - use non-irq versions of spinlocks for job rings"
made two bad assumptions:
(a) The caam_jr_enqueue lock isn't used in softirq context.
Not true: jr_enqueue can be interrupted by an incoming net
interrupt and the received packet may be sent for encryption,
via caam_jr_enqueue in softirq context, thereby inducing a
deadlock.
This is evidenced when running netperf over an IPSec tunnel
between two P4080's, with spinlock debugging turned on:
[ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70
[ 892.098747] Call Trace:
[ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50
[ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8
[ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70
[ 892.129629] Call Trace:
[ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50
[ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8
[ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334
[ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818
[ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408
[ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898
[ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c
[ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94
[ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4
[ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0
[ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24
[ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104
[ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8
[ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0
[ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18
[ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0
[ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430
[ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84
[ 892.281474]
[ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334
[ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818
[ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408
[ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898
[ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c
[ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94
[ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4
[ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0
[ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24
[ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104
[ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8
[ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0
[ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18
[ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250
[ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70
[ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570
[ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0
[ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28
[ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98
[ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98
[ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490
[ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4
[ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04
[ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec
[ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164
[ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc
[ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc
[ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c
[ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c
(b) since the caam_jr_dequeue lock is only used in bh context,
then semantically it should use _bh spin_lock types. spin_lock_bh
semantics are to disable back-halves, and used when a lock is shared
between softirq (bh) context and process and/or h/w IRQ context.
Since the lock is only used within softirq context, and this tasklet
is atomic, there is no need to do the additional work to disable
back halves.
This patch adds back-half disabling protection to caam_jr_enqueue
spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b).
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Initialization of cra_list is currently mixed, most ciphers initialize this
field and most shashes do not. Initialization however is not needed at all
since cra_list is initialized/overwritten in __crypto_register_alg() with
list_add(). Therefore perform cleanup to remove all unneeded initializations
of this field in 'crypto/drivers/'.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-geode@lists.infradead.org
Cc: Michal Ludvig <michal@logix.cz>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Cc: Varun Wadekar <vwadekar@nvidia.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Kent Yoder <key@linux.vnet.ibm.com>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random subsystem patches from Ted Ts'o:
"This patch series contains a major revamp of how we collect entropy
from interrupts for /dev/random and /dev/urandom.
The goal is to addresses weaknesses discussed in the paper "Mining
your Ps and Qs: Detection of Widespread Weak Keys in Network Devices",
by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman,
which will be published in the Proceedings of the 21st Usenix Security
Symposium, August 2012. (See https://factorable.net for more
information and an extended version of the paper.)"
Fix up trivial conflicts due to nearby changes in
drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c}
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits)
random: mix in architectural randomness in extract_buf()
dmi: Feed DMI table to /dev/random driver
random: Add comment to random_initialize()
random: final removal of IRQF_SAMPLE_RANDOM
um: remove IRQF_SAMPLE_RANDOM which is now a no-op
sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op
[ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op
board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op
isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op
pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out
uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op
xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op
n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op
pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op
i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op
input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op
mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op
...
|
|
Commit feb7b7ab928afa97a79a9c424e4e0691f49d63be changed NSEC_PER_SEC to 64-bit
constant, which causes "DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq)" to
generate __divdi3 call on 32-bit archs. Fix this by changing DIV_ROUND_UP to
DIV_ROUND_UP_ULL.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A mixed bag of fixes, some for merge window fallout (tegra, MXS), and
a short series of fixes for marvell platforms that didn't make it in
before 3.5."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mxs: fix compile error caused by prom_update_property change
ARM: dt: tegra trimslice: enable USB2 port
ARM: dt: tegra trimslice: add vbus-gpio property
ARM: vt8500: Add maintainer for VT8500 architecture
ARM: Kirkwood: Replace mrvl with marvell
ARM: Orion: fix driver probe error handling with respect to clk
ARM: Dove: Fixup ge00 initialisation
ARM: Kirkwood: Fix PHY disable clk problems
ARM: Kirkwood: Ensure runit clock always ticks.
ARM: versatile: Don't use platform clock for Integrator & VE
ARM: tegra: harmony: add regulator supply name and its input supply
|
|
Pull crypto updates from Herbert Xu:
- Fixed algorithm construction hang when self-test fails.
- Added SHA variants to talitos AEAD list.
- New driver for Exynos random number generator.
- Performance enhancements for arc4.
- Added hwrng support to caam.
- Added ahash support to caam.
- Fixed bad kfree in aesni-intel.
- Allow aesni-intel in FIPS mode.
- Added atmel driver with support for AES/3DES/SHA.
- Bug fixes for mv_cesa.
- CRC hardware driver for BF60x family processors.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
crypto: twofish-avx - remove useless instruction
crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors
crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms
crypto: talitos - export the talitos_submit function
crypto: talitos - move talitos structures to header file
crypto: atmel - add new tests to tcrypt
crypto: atmel - add Atmel SHA1/SHA256 driver
crypto: atmel - add Atmel DES/TDES driver
crypto: atmel - add Atmel AES driver
ARM: AT91SAM9G45: add crypto peripherals
crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode
hwrng: exynos - Add support for Exynos random number generator
crypto: aesni-intel - fix wrong kfree pointer
crypto: caam - ERA retrieval and printing for SEC device
crypto: caam - Using alloc_coherent for caam job rings
crypto: algapi - Fix hang on crypto allocation
crypto: arc4 - now arc needs blockcipher support
crypto: caam - one tasklet per job ring
crypto: caam - consolidate memory barriers from job ring en/dequeue
crypto: caam - only query h/w in job ring dequeue path
...
|
|
From Andrew Lunn <andrew@lunn.ch>:
* 'v3.5-rc7-fixes' of git://github.com/lunn/linux:
ARM: Kirkwood: Replace mrvl with marvell
ARM: Orion: fix driver probe error handling with respect to clk
ARM: Dove: Fixup ge00 initialisation
ARM: Kirkwood: Fix PHY disable clk problems
ARM: Kirkwood: Ensure runit clock always ticks.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The clk patches added code to get and enable clocks in the
respective driver probe functions. If the probe function failed
for some reason after enabling the clock, the clock was not
disabled again in many cases.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lumm <andrew@lunn.ch>
|
|
Pull arm-soc clk changes from Arnd Bergmann:
"Clock support is moving to the clk subsystem. These tegra, omap and
imx changes are for code that is still platform specific and not (yet)
part of that subsystem."
Fix up conflicts in arch/arm/mach-{imx/clk-imx51-imx53.c,omap2/Makefile}
* tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
ARM: imx: clk-imx31: Fix clock id for rnga driver
ARM: imx: add missing item to the list of clock event modes
ARM: i.MX5x CSPI: Fixed clock name for CSPI
ARM: i.MX5x clocks: Fix GPT clocks
ARM: i.MX5x clocks: Fix parent for PWM clocks
ARM: i.MX5x clocks: Add EPIT support
ARM: mx27: Reenable silicon version print
ARM: clk-imx27: Fix rtc clock id
ARM: tegra: Provide clock for only one PWM controller
ARM: tegra: Fix PWM clock programming
ARM: OMAP3+: clock33xx: Add AM33XX clock tree data
ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file
ARM: tegra: dma: rename driver name for clock to "tegra-apbdma"
ARM: tegra: Remove second instance of uart clk
crypto: add clk_prepare/clk_unprepare
ASoC: tegra: add clk_prepare/clk_unprepare
staging: nvec: add clk_prepare/clk_unprepare
spi/tegra: add clk_prepare/clk_unprepare
Input: tegra-kbc - add clk_prepare/clk_unprepare
USB: ehci-tegra: add clk_prepare/clk_unprepare
...
|
