aboutsummaryrefslogtreecommitdiff
path: root/drivers/firmware/xilinx
AgeCommit message (Collapse)Author
2020-05-15firmware: xilinx: Fix an error handling path in 'zynqmp_firmware_probe()'Christophe JAILLET
If 'mfd_add_devices()' fails, we must undo 'zynqmp_pm_api_debugfs_init()' otherwise some debugfs directory and files will be left. Just move the call to 'zynqmp_pm_api_debugfs_init()' a few lines below to fix the issue. Fixes: e23d9c6d0d49 ("drivers: soc: xilinx: Add ZynqMP power domain driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/20200510130357.233364-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-04firmware: xilinx: Export zynqmp_pm_fpga_{get_status,load}Nathan Chancellor
When building arm64 allmodconfig: ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined! ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined! These functions were added to drivers/fpga/zynqmp-fpga.c but not exported so the module build breaks. Export them so that they can be used in modules properly. Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200502025958.2714249-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs and API to set boot health statusRajan Vaja
Add sysfs interface to set boot health status from user space. Add API used by this interface to communicate with firmware. If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the healthy bit on FPD WDT expiration. If healthy bit is set by a user application running in Linux, PMUFW will do APU only restart. If healthy bit is not set during FPD WDT expiration, PMUFW will do system restart. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs to set shutdown scopeRajan Vaja
The Linux shutdown functionality implemented via PSCI system_off does not include an option to set a scope, i.e. which parts of the system to shut down. This patch creates sysfs that allows to set the shutdown scope for the next shutdown request. When the next shutdown is performed, the platform specific portion of PSCI-system_off can use the chosen shutdown scope. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add system shutdown API interfaceRajan Vaja
Add system shutdown API interface which asks firmware to perform system shutdown/restart. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add sysfs interfaceRajan Vaja
Add firmware-ggs sysfs interface which provides read/write interface to global storage registers. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Add APIs to read/write GGS/PGGS registersRajan Vaja
Add APIs to read/write PGGS and GGS registers. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-22-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for fpga related APIsRajan Vaja
Use direct function call instead of using eemi ops for fpga related APIs. Also remove eemi ops structure. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for aes engineRajan Vaja
Use direct function call for aes engine instead of using eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-20-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for set_requirementRajan Vaja
Use direct function call instead of using eemi ops for set_requirement. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-19-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for release_nodeRajan Vaja
Use direct function call instead of using eemi ops for release_node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-18-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for request_nodeRajan Vaja
Use direct function call instead of using eemi ops for request_node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-17-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for set_suspend_modeRajan Vaja
Use direct function call instead of eemi ops for set_suspend_mode. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-16-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for init_finalizeRajan Vaja
Use direct function call instead of eemi ops for init_finalize. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-15-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for reset_get_statusRajan Vaja
Use direct function call instead of using eemi ops for reset_get_status. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-14-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for reset_assertRajan Vaja
Use direct function call instead of using eemi ops for reset_assert. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-13-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Use APIs instead of IOCTLsRajan Vaja
Remove IOCTL API and use individual APIs for better readability. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-12-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock set/get parentRajan Vaja
Use direct function call instead of eemi ops for clock set/get parent. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-11-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock set/get rateRajan Vaja
Use direct function call instead of eemi ops for clock set/get rate. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-10-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getdividerRajan Vaja
Use direct function call instead of using eemi ops for clock_getdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_setdividerRajan Vaja
Use direct function call instead of using eemi ops for clock_setdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getstateRajan Vaja
Use direct function call instead of eemi ops for clock_getstate. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-7-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_disableRajan Vaja
Use direct function call for clock_disable instead using of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-6-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_enableRajan Vaja
Use direct function call for clock_enable instead of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-5-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for query_dataRajan Vaja
Use direct function call for query_data instead of using eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-4-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for get_chipidRajan Vaja
Use direct function call instead of eemi ops for get_chipid. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-3-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for get_api_versionRajan Vaja
Use direct function calls instead of using eemi ops. So remove eemi ops for get_api_version and use direct function call. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-2-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-15firmware: xilinx: make firmware_debugfs_root staticJason Yan
Fix the following sparse warning: drivers/firmware/xilinx/zynqmp-debug.c:38:15: warning: symbol 'firmware_debugfs_root' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200415084311.24857-1-yanaijie@huawei.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-03Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "The code changes are mostly for 32-bit platforms and include: - Lots of updates for the Nvidia Tegra platform, including cpuidle, pmc, and dt-binding changes - Microchip at91 power management updates for the recently added sam9x60 SoC - Treewide setup_irq deprecation by afzal mohammed - STMicroelectronics stm32 gains earlycon support - Renesas platforms with Cortex-A9 can now use the global timer - Some TI OMAP2+ platforms gain cpuidle support - Various cleanups for the i.MX6 and Orion platforms, as well as Kconfig files across all platforms" * tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits) ARM: qcom: Add support for IPQ40xx ARM: mmp: replace setup_irq() by request_irq() ARM: cns3xxx: replace setup_irq() by request_irq() ARM: spear: replace setup_irq() by request_irq() ARM: ep93xx: Replace setup_irq() by request_irq() ARM: iop32x: replace setup_irq() by request_irq() arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ...
2020-04-01Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ...
2020-03-24firmware: xilinx: Add DLL reset supportManish Narani
SD DLL resets are required for some of the operations on ZynqMP platform. Add DLL reset support in ZynqMP firmware driver for SD DLL reset. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1579602095-30060-3-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24firmware: xilinx: Add ZynqMP Tap Delay setup ioctl to the valid listManish Narani
The Tap Delay setup ioctl was not added to valid list due to which it may fail to set Tap Delays for SD. This patch fixes the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1579602095-30060-2-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-09arm64: zynqmp: Make zynqmp_firmware driver optionalTejas Patel
Make zynqmp_firmware driver as optional to disable it, if user don't want to use default zynqmp firmware interface. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28firmware: xilinx: Add ZynqMP aes API for AES functionalityKalyani Akula
Add ZynqMP firmware AES API to perform encryption/decryption of given data. Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-23clk: zynqmp: Warn user if clock user are more than allowedRajan Vaja
Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-12drivers: firmware: xilinx: Add support for feature checkRavi Patel
Query for corresponding feature before calling EEMI API from the driver. Signed-off-by: Ravi Patel <ravi.patel@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
2019-10-16firmware: xilinx: Add support for versal socJolly Shah
Versal is xilinx's next generation soc. This patch adds driver support required to be compatible with versal device. Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15firmware: xilinx: Add fpga API'sNava kishore Manne
This Patch Adds fpga API's to support the Bitstream loading by using firmware interface. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-03-18drivers: Defer probe if firmware is not readyRajan Vaja
Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-03-18firmware: xilinx: fix debugfs write handlerJann Horn
- Userspace wants to write a string with `len` bytes, not counting the terminating NULL, so we should allocate `len+1` bytes. It looks like the current code relied on having a nullbyte directly behind `kern_buff`, which happens to work reliably as long as `len` isn't one of the kmalloc size classes. - strncpy_from_user() is completely wrong here; userspace is giving us a (not necessarily null-terminated) buffer and its length. strncpy_from_user() is for cases in which we don't know the length. - Don't let broken userspace allocate arbitrarily big kmalloc allocations. Just use memdup_user_nul(), which is designed precisely for things like this. Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-12drivers: soc: xilinx: Add ZynqMP power domain driverJolly Shah
The zynqmp-genpd driver communicates the usage requirements for logical power domains / devices to the platform FW. FW is responsible for choosing appropriate power states, taking Linux' usage information into account. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-12firmware: xilinx: Add APIs to control node status/powerRajan Vaja
Add Xilinx ZynqMP firmware APIs to control node status and power. These APIs allows turning on/off power domain and setting capabilities of devices present in power domain. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-12firmware: xilinx: Implement ZynqMP power management APIsJolly Shah
Add Xilinx ZynqMP firmware APIs to set suspend mode and inform firmware that master has initialized its own power management. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-05firmware: xilinx: Add zynqmp_pm_get_chipid() APINava kishore Manne
This patch adds a new API to provide access to the hardware related data like soc revision, IDCODE... etc. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-29firmware: xilinx: Add reset API'sNava kishore Manne
This Patch Adds reset API's to support release, assert and status functionalities by using firmware interface. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-09firmware: xilinx: Add zynqmp IOCTL API for device controlRajan Vaja
Add ZynqMP firmware IOCTL API to control and configure devices like PLLs, SD, Gem, etc. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26firmware: xilinx: Add debugfs for query data APIRajan Vaja
Add debugfs file to query platform specific data from firmware using debugfs interface. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26firmware: xilinx: Add debugfs interfaceRajan Vaja
Firmware-debug provides debugfs interface to all APIs. Debugfs can be used to call firmware APIs with required parameters. Usage: * Calling firmware API through debugfs: # echo "<api-name> <arg1> .. <argn>" > /sys/.../zynqmp-firmware/pm * Read output of last called firmware API: # cat /sys/.../zynqmp-firmware/pm Refer ug1200 for more information on these APIs: * https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf Add basic debugfs file to get API version. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26firmware: xilinx: Add clock APIsRajan Vaja
Add clock APIs to control clocks through firmware interface. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 17:53:04 +0000