| Age | Commit message (Collapse) | Author |
|---|
|
If the user-space sets the chip label to an empty string - we should
check the length and not override the default name or else line hogs
will not be properly attached.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Fix the same error check issue in two drivers. And then the drivers
are fixed even more because the first patches were incomplete which I
missed.
Summary:
- fix the error checks of platform_get_irq() in gpio-mpc8xxx and
gpio-idt3243x"
* tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix IRQ check in idt_gpio_probe
gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe
|
|
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irqn', so making 'irqn' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression
compared with zero: mpc8xxx_gc -> irqn < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 0b39536cc699 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'parent_irq', so making 'parent_irq' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression
compared with zero: parent_irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 30fee1d7462a ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
|
|
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Lakefield PCH to Intel LPSS PCI
Remove Device Support:
- Remove support for ROHM BD70528 Power Management IC
New Functionality:
- Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC
- Enable I2C4 on Microsoft Surface Go & Go 2
Fix-ups:
- Device Tree changes (inc. YAML conversion); maxim,max77686,
rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec
- Use __maybe_unused instead of #ifery; atmel-flexcom
- Allow the Regmap API to handle endianess internally; ntxec
- Utilise I2C's .resume_noirq call-back; atmel-flexcom
- Remove unused code; ti_am335x_tscadc
- Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core
- Allow device to power-off right from .probe(); tps65910
- Trivial (whitespace, typos, etc); da9063
Bug Fixes:
- Fix ordering issues during probe; intel-lpss-acpi
- Fix correct clock speed; intel-lpss-pci"
* tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
mfd: google,cros-ec: Fix property name for MediaTek rpmsg
dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16
mfd: tps65910: Set PWR_OFF bit during driver probe
mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants
mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2
dt-bindings: mfd: Add Broadcom's Timer-Watchdog block
dt-bindings: mfd: Add Freecom system controller
mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool
dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg
mfd: da9062: Support SMBus and I2C mode
mfd: intel-lpss-pci: Fix clock speed for 38a8 UART
mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()
mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro
mfd: stmpe: Support disabling sub-functions
mfd: atmel-flexcom: Use .resume_noirq
mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
dt-bindings: mfd: bd9571mwv: Convert to json-schema
mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs
dt-bindings: mfd: maxim,max77686: Convert to dtschema
...
|
|
The driver overrides the error code returned by devm_request_irq() to
-ENOENT. Switch to propagating the error code upstream.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
GPIO library now accepts fwnode as a firmware node, so
switch the driver to use it and hence rectify the ACPI
case which uses software nodes.
Note, in this case it's rather logical fix that doesn't
affect functionality, thus no backporting required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
If the driver sets the fwnode in struct gpio_chip, let it take
precedence over the parent's fwnode.
This is a follow up to the commit 9126a738edc1 ("gpiolib: of: make
fwnode take precedence in struct gpio_chip").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
kfree() and bitmap_free() are the same. But using the later is more
consistent when freeing memory allocated with bitmap_alloc().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
GPIO library now accepts fwnode as a firmware node, so
switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra241 (Grace). While the programming model
remains the same, the number of pins has slightly changed.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
We already have a local variable that contains a copy of OF node pointer.
Use it instead of dereferencing it again from struct device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
After the commit 448cf90513d9 ("gpio: Get rid of duplicate of_node
assignment in the drivers") the OF node local pointers become unused.
Remove them for good and make compiler happy about.
Fixes: 448cf90513d9 ("gpio: Get rid of duplicate of_node assignment in the drivers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bart: removed unrelated change in gpio-brcmstb]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The driver imposes an arbitrary one second timeout on virtio requests,
but the specification doesn't prevent the virtio device from taking
longer to process requests, so remove this timeout to support all
systems and device implementations.
Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Calling fwnode_handle_put() when break out of device_for_each_child_node(),
or the device node reference will be leakd.
Fixes: 83960fcf4818 ("gpio: sim: new testing module")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
This adds GPIO support for the SSD201 and SSD202D chips.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
- Remove the unneeded assignment of ret before returning it.
- Remove an unneeded blank line
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When replugging the device the following message shows up:
gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver.
This also has the effect that interrupts won't work.
The same problem would also show up if multiple devices where plugged in.
Fix this by allocating the irq_chip data structure per instance like other
drivers do.
I don't know when this problem appeared, but it is present in 5.10.
Cc: <stable@vger.kernel.org> # 5.10+
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Building with clang returns this error:
gpio-sim.c:889:7: error: variable 'ret' is uninitialized
when used here
ret should be the status of the call to
gpio_sim_make_bank_swnode stored in bank->swnode.
Fixes: 83960fcf4818 ("gpio: sim: new testing module")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When creating MFD platform devices the firmware node is left unset.
This, in particular, prevents GPIO library to use it for different
purposes. Propagate firmware node from the parent device and let
GPIO library do the right thing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Some of the drivers do not set parent device. This may lead to obstacles
during debugging or understanding the device relations from the Linux
point of view. Assign parent device for GPIO chips created by these
drivers.
While at it, let GPIO library to assign of_node from the parent device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
While at it, remove duplicate parent device assignment where it is the case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.17-1
- Don't set type for IRQ already in use in case of ACPI
- Drop unused call from GPIO ACPI library
- Clean up ML IOH and PCH GPIO drivers to make it closer to each other
- Clarify use of register file version in DesignWare driver
- other minor tweaks
|
|
Some GPIO providers set names for GPIO lines that match the names of
the pins on the SoC, or variations on that theme. These names are
generic more often that not, such as pioC12 in the at91 case. These
generic names block the possibility to set more useful GPIO line
names with device properties (i.e. gpio-line-names).
Allow overriding a generic name given by the GPIO driver if there is
a name given to the GPIO line using device properties, but leave the
generic name alone if no better name is available.
However, there is a risk. If user space is depending on the above
mentioned fixed GPIO names, AND there are device properties that
previously did not reach the surface, the name change might cause
regressions. But hopefully this stays below the radar...
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add an ACPI HID(AMDIF031) and pin number in the pt_gpio_acpi_match.
Signed-off-by: Yuchang Hsu <Richard_Hsu@asmedia.com.tw>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra234. While the programming model remains
the same, the number of pins has slightly changed.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The double `all' in the comment in line 327 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If the driver sets the fwnode in struct gpio_chip, let it take
precedence over the of_node. This only affects OF-based systems,
ACPI needs to be converted separately.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Software nodes allow us to represent hierarchies for device components
that don't have their struct device representation yet - for instance:
banks of GPIOs under a common GPIO expander. The core gpiolib core
however doesn't offer any way of passing this information from the
drivers.
This extends struct gpio_chip with a pointer to fwnode that can be set
by the driver and used to pass device properties for child nodes.
This is similar to how we handle device-tree sub-nodes with
CONFIG_OF_GPIO enabled.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently all users of gpiod_add_hogs() call it only once at system
init so there never was any need for a mechanism allowing to remove
them. Now the upcoming gpio-sim will need to tear down chips with hogged
lines so provide a function that allows to remove hogs.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The double `the' in the comment in line 142 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The gpio-aspeed-sgpio driver implements an irq_chip which need to be
invoked from hardirq context. Since spin_lock() can sleep with
PREEMPT_RT, it is no longer legal to invoke it while interrupts are
disabled.
This also causes lockdep to complain about:
[ 25.919465] [ BUG: Invalid wait context ]
because aspeed_sgpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[ 0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Several drivers read the 'ngpios' device property on their own, but
since it's defined as a standard GPIO property in the device tree bindings
anyway, it's a good candidate for generalization. If the driver didn't
set its gc->ngpio, try to read the 'ngpios' property from the GPIO
device's firmware node before bailing out.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Drop unneeded whitespaces and put the variables of the same type
together for consistency with the rest of the code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Commit ea708ac5bf41 ("gpio: xlp: Remove Netlogic XLP variants") has
build errors with CONFIG_ACPI:
drivers/gpio/gpio-xlp.c:300:23: error: 'GPIO_VARIANT_VULCAN' undeclared here (not in a function)
and !CONFIG_OF:
drivers/gpio/gpio-xlp.c:267:11: error: 'struct gpio_chip' has no member named 'of_node'
Fix these errors.
Fixes: ea708ac5bf41 ("gpio: xlp: Remove Netlogic XLP variants")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Use the standard gpiochip request/release resource functions so that any
GPIOs used as interrupts are properly locked. This allows libgpiod to
correctly show these GPIOs as in-use.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Currently the GPIO Aggregator does not support interrupts. This means
that kernel drivers going from a GPIO to an IRQ using gpiod_to_irq(),
and userspace applications using line events do not work.
Add interrupt support by providing a gpio_chip.to_irq() callback, which
just calls into the parent GPIO controller.
Note that this does not implement full interrupt controller (irq_chip)
support, so using e.g. gpio-keys with "interrupts" instead of "gpios"
still does not work.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
This saves 20 bytes on arm32, and 44 bytes on arm64.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
First of all, it's obvious that different versions can't be provided
simultaneously. Hence, versions can't be bit masks.
Second, due to above we have to mask out the version field in the flags
and only that can be evaluated against the certain version.
Clarify all above by:
- introducing GPIO_REG_OFFSET_V1 and GPIO_REG_OFFSET_MASK
- replacing conditional to mask out bits and compare to a version
Luckily there is no functional change, so no need to backport this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
