aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)Author
2020-10-23drm/panel: mantix: Fix panel resetGuido Günther
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-23drm/panel: mantix: Don't dereference NULL modeGuido Günther
Don't dereference mode which was just NULL checked. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-09-10drm/panel: s6e63m0: Add missing MODULE_LICENSEYueHaibing
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o Add the missing license/author/description tags. Fixes: b7b23e447687 ("drm/panel: s6e63m0: Break out SPI transport") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
2020-09-06drm/panel: s6e63m0: Fix up DRM_DEV* regressionLinus Walleij
Ooops the panel drivers stopped to use DRM_DEV* messages and we predictably create errors by merging code that still use it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20200906132903.5739-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Order enable/disable sequenceLinus Walleij
The upstream S6E63M0 driver has some peculiarities around the prepare/enable disable/unprepare sequence: the screen is taken out of sleep in prepare() as part of s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON in enable(). However it is just put into sleep mode directly in disable(). As disable()/enable() can be called without unprepare()/prepare() being called, this is unbalanced, we should take the display out of sleep in enable() then turn it off(). Further MIPI_DCS_SET_DISPLAY_OFF is never called balanced with MIPI_DCS_SET_DISPLAY_ON. The vendor driver for Samsung GT-I8190 (Golden) does all of these things in strict order. Augment the driver to do exit sleep/set display on in enable() and set display off/enter sleep in disable(). Further send an explicit reset pulse in power_on() so we come up in a known state, and issue the MCS_ERROR_CHECK command after setting display on like the vendor driver does. Also use the timings from the vendor driver in the sequence. Doing all of these things makes the display much more stable on the Samsung GT-I8190 when enabling/disabling the display pipeline. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add code to identify panelLinus Walleij
We add code to identify a few different panels mounted on the s6e63m0 controller. This is necessary to achieve the proper biasing with DSI versions of the panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add reading functionalityLinus Walleij
This adds code to send read commands to read a single byte from the display, in order to perform MTP ID look-up of the mounted panel on the s6e63m0 controller. This is needed for proper biasing on the DSI variants. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add DSI transportLinus Walleij
This makes it possible to use the s6e63m0 panel with a DSI host, such as in the Samsung GT-I8190 (Golden) mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Break out SPI transportLinus Walleij
This panel can be accessed using both SPI and DSI. To make it possible to probe and use the device also from a DSI bus, first break out the SPI support to its own file. Since all the panel driver does is write DCS commands to the panel, we pass a DCS write function to probe() from each subdriver. We make the Kconfig entry for SPI mode default so all current users will continue to work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/384873/
2020-08-30drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panelLaurent Pinchart
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
2020-08-29drm/panel: rm67191: Remove CLOCK_NON_CONTINUOUS flagRobert Chiras
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
2020-08-29drm/panel: simple: Add AM-1280800N3TZQW-T00HJagan Teki
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
2020-08-21drm: panel: simple: Add KD116N21-30NV-A010Douglas Anderson
Values come from the vendor and have been tested on hardware. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
2020-08-20drm/panel: novatek,nt39016: Remove 'dev' field in priv structPaul Cercueil
There is already a 'struct device' pointer in the drm_panel structure, that we can access easily from our priv structure, so there's no need for a separate 'dev' field there. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
2020-08-20drm/panel: novatek,nt39016: Reorder calls in probePaul Cercueil
The drm_panel_of_backlight() function must be called after drm_panel_init(), according to the function's documentation; otherwise the backlight won't be properly initialized. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
2020-08-18drm/panel: Use dev_ based loggingSam Ravnborg
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
2020-08-18drm/panel: sitronix: Use dev_ based loggingSam Ravnborg
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
2020-08-18drm/panel: raydium: Use dev_ based loggingSam Ravnborg
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
2020-08-18drm/panel: leadtek: Use dev_ based loggingSam Ravnborg
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
2020-08-18drm/panel: samsung: Use dev_ based loggingSam Ravnborg
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
2020-08-18drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panelGuido Günther
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org
2020-08-16drm/panel-simple: Read panel orientationDmitry Osipenko
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the panel-simple driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
2020-08-16drm/panel: lvds: Read panel orientationDmitry Osipenko
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the generic LVDS panel. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
2020-08-16drm/panel: Read panel orientation for BOE TV101WUM-NL6Derek Basehore
This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-15drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panelIcenowy Zheng
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C controller. Add this panel's initialzation sequence and timing to ILI9881C driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
2020-08-15drm/panel: ilitek-ili9881c: prepare for adding support for extra panelsIcenowy Zheng
There're more panels with ILI9881C controller than the Bananapi one supported by this driver. Extract the mode and init sequence part, to prepare the driver for adding new panels. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
2020-08-15drm/panel: simple: Add 50Hz mode for sharp,ls020b1dd01dPaul Cercueil
Add a perfect 50.00 Hz frame rate mode to the list of available modes for the Sharp LS020B1DD01D panel. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-6-paul@crapouillou.net
2020-08-15drm/panel: simple: Tweak timings of sharp,ls020b1dd01d for perfect 60HzPaul Cercueil
Modify the video mode in order to obtain a perfect 60.00 Hz frame rate using a 3 MHz pixel clock. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-5-paul@crapouillou.net
2020-08-15drm/panel: simple: Convert sharp,ls020b1dd01d from timings to videomodePaul Cercueil
Convert the Sharp LS020B1DD01D panel entry from using a struct display_timing to using a struct drm_display_mode, as display_timing seems to be the old and legacy format. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
2020-08-15drm/panel: novatek,nt39016: Add missing CR to error messagesPaul Cercueil
If you pass a string that is not terminated with a carriage return to dev_err(), it will eventually be printed with a carriage return, but not right away, since the kernel will wait for a pr_cont(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
2020-08-15drm/panel: novatek,nt39016: Handle backlight the standard wayPaul Cercueil
Instead of manipulating the backlight directly in this driver, register it in the probe using drm_panel_of_backlight() and let the drm_panel framework code handle it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
2020-08-13drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panelLaurent Pinchart
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel, set the bus format to MEDIA_BUS_FMT_RGB666_1X18. Fixes: 725c9d40f3fe ("drm/panel: Add support for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812220244.24500-1-laurent.pinchart@ideasonboard.com
2020-08-12Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging drm-next into drm-misc-next for nouveau and panel updates. Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got renamed to struct ttm_resource. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-08-11drm/panel-notatek-nt35510: Fix MTP read initLinus Walleij
In order to successfully read ID of the MTP panel the panel MTP control page must be unlocked. Previously this wasn't encountered because in the setup with this panel the power wasn't ever really dropped. When power gets dropped from the panel, MTP needs to be unlocked. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808224322.1507713-1-linus.walleij@linaro.org
2020-08-11Merge tag 'v5.8' into drm-nextDave Airlie
I need to backmerge 5.8 as I've got a bunch of fixes sitting on an rc7 base that I want to land. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-08-02drm/panel: simple: Add Chefree CH101OLHLWH-002 panelMarek Vasut
Add support for the Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel, connected over LVDS. Timings are taken from the datasheet version P0.5. Signed-off-by: Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200728201242.4336-3-marex@denx.de
2020-08-02drm/panel: remove return value of function drm_panel_addBernard Zhao
The function "int drm_panel_add(struct drm_panel *panel)" always returns 0, this return value is meaningless. Also, there is no need to check return value which calls "drm_panel_add and", error branch code will never run. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
2020-07-28drm/panel: simple: Add Powertip PH800480T013 panelMarek Vasut
Add support for Powertip PH800480T013 800x480 parallel LCD, this one is used in the Raspberry Pi 7" touchscreen display unit. Signed-off-by: Marek Vasut <marex@denx.de> To: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-3-marex@denx.de
2020-07-27drm/panel: panel-simple: add default connector_typeSam Ravnborg
All panels shall report a connector type. panel-simple has a lot of panels with no connector_type, and for these fall back to DPI as the default. v2: - Rebased on top of validation of panel description Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-3-sam@ravnborg.org
2020-07-27drm/panel: panel-simple: validate panel descriptionSam Ravnborg
Warn if we detect a panel with incomplete/wrong description. This is inspired by a similar patch by Laurent that introduced checks for LVDS panels - this extends the checks to the remaining type of connectors. This is known to warn for some of the existing panels but added despite this as we need help from people using the panels to add the missing info. The checks are not complete but will catch the most common mistakes. The checks at the same time serve as documentation for the minimum required description for a panel. The checks uses dev_warn() as we know this will hit. WARN() was too noisy at the moment for anything else than LVDS. v3: - %d => %u for bpc (Laurent) v2: - Use dev_warn (Laurent) - Check for empty bus_flags Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-2-sam@ravnborg.org
2020-07-26drm/panel: add connector type to boe,hv070wsa-100 panelSam Ravnborg
The boe,hv070wsa-100 panel is a LVDS panel. Fix connector type to reflect this. With this change users of this panel do not have to specify the connector type. v4: - Add .bpc = 4 (Laurent) v3: - Drop PIXDATA bus_flag, not relevant v2: - Add .bus_format (Laurent) - Add .bus_flags Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200703192417.372164-2-sam@ravnborg.org
2020-07-26drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panelJitao Shi
Fine tune the HBP and HFP to avoid the dot noise on the left and right edges. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200714123332.37609-1-jitao.shi@mediatek.com
2020-07-26drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 msDouglas Anderson
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows a small spike on the HPD line right when you power the panel on. The picture looks something like this: +-------------------------------------- | | | Power ---+ +--- | ++ | +----+| | HPD -----+ +---------------------------+ So right when power is applied there's a little bump in HPD and then there's small spike right before it goes low. The total time of the little bump plus the spike was measured on one panel as being 8 ms long. The total time for the HPD to go high on the same panel was 51.2 ms, though the datasheet only promises it is < 200 ms. When asked about this glitch, BOE indicated that it was expected and persisted until the TCON has been initialized. If this was a real hotpluggable DP panel then this wouldn't matter a whole lot. We'd debounce the HPD signal for a really long time and so the little blip wouldn't hurt. However, this is not a hotpluggable DP panel and the the debouncing logic isn't needed and just shows down the time needed to get the display working. This is why the code in panel_simple_prepare() doesn't do debouncing and just waits for HPD to go high once. Unfortunately if we get unlucky and happen to poll the HPD line right at the spike we can try talking to the panel before it's ready. Let's handle this situation by putting in a 15 ms prepare delay and decreasing the "hpd absent delay" by 15 ms. That means: * If you don't have HPD hooked up at all you've still got the hardcoded 200 ms delay. * If you've got HPD hooked up you will always wait at least 15 ms before checking HPD. The only case where this could be bad is if the panel is sharing a voltage rail with something else in the system and was already turned on long before the panel came up. In such a case we'll be delaying 15 ms for no reason, but it's not a huge delay and I don't see any other good solution to handle that case. Even though the delay was measured as 8 ms, 15 ms was chosen to give a bit of margin. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-16drm/panel-simple: Add 50 Hz mode to the Frida FRD350H54004 panelPaul Cercueil
By changing the pixel clock and the length of the back porch, it is possible to obtain a perfect 50 Hz refresh rate. v2: Rebase on drm-misc-next Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-2-paul@crapouillou.net
2020-07-16drm/panel-simple: Fix inverted V/H SYNC for Frida FRD350H54004 panelPaul Cercueil
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC signals, which sorts-of worked, but resulted in the picture fading out under certain circumstances. Fix this issue by marking VSYNC and HSYNC signals active-low. v2: Rebase on drm-misc-next Fixes: 7b6bd8433609 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel") Cc: stable@vger.kernel.org # v5.5 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net
2020-07-12drm: panel: simple: Fix bpc for LG LB070WV8 panelLaurent Pinchart
The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.com
2020-07-11drm/panel: auo,b116xw03: fix flash backlight when power onJitao Shi
Delay the backlight on to make sure the video stable. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200705094514.34526-1-jitao.shi@mediatek.com
2020-07-10drm/panel: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200709184755.24798-1-grandmaster@al2klimov.de
2020-07-01drm/panel: st7703: Assert reset prior to powering down the regulatorsOndrej Jirman
The reset pin is inverted, so if we don't assert reset, the actual gpio will be high and may keep driving the IO port of the panel. Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-04 13:10:51 +0000