aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid/usbhid
AgeCommit message (Collapse)Author
2014-07-07HID: use multi input quirk for 22b9:2968Wen-chien Jesse Sung
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-27HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.John Sung
These device needs to be added to the quirks list with HID_QUIRK_NOGET, otherwise they will reset upon receiving the get input report requests. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-sensor-hub.c
2014-06-02HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB KeykoardJiri Kosina
The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0023 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. This patch adds the quirk for this device, which causes the delay to disappear. [jkosina@suse.cz: remove superfluous comment and fix ordering] Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103SHans de Goede
This touchpad seriously dislikes init reports, not only timeing out, but also refusing to work after this. Cc: stable@vger.kernel.org Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-01Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-sony.c drivers/hid/i2c-hid/i2c-hid.c
2014-04-01Merge branch 'for-3.15/ll-driver-new-callbacks' into for-linusJiri Kosina
2014-03-14HID: remove hid_output_raw_report transport implementationsBenjamin Tissoires
Nobody calls hid_output_raw_report anymore, and nobody should. We can now remove the various implementation in the different transport drivers and the declarations. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-14HID: sony: do not rely on hid_output_raw_reportBenjamin Tissoires
hid_out_raw_report is going to be obsoleted as it is not part of the unified HID low level transport documentation (Documentation/hid/hid-transport.txt) To do so, we need to introduce two new quirks: * HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP: this quirks prevents the transport driver to use the interrupt channel to send output report (and thus force to use HID_REQ_SET_REPORT command) * HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not include the report ID in the buffer it sends to the device through HID_REQ_SET_REPORT in case of an output report This also fixes a regression introduced in commit 3a75b24949a8 (HID: hidraw: replace hid_output_raw_report() calls by appropriates ones). The hidraw API was not able to communicate with the PS3 SixAxis controllers in USB mode. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: usbhid: change return error of usbhid_output_reportBenjamin Tissoires
If there is no urbout when sending a output report, ENOSYS (Function not implemented) is a better error than EIO (I/O error). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: remove hid_get_raw_report in struct hid_deviceBenjamin Tissoires
dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT) are strictly equivalent. Switch the hid subsystem to the hid_hw notation and remove the field .hid_get_raw_report in struct hid_device. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: usbhid: remove duplicated codeBenjamin Tissoires
Well, no use to keep twice the same code. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-29HID: Add transport-driver functions to the USB HID interface.Frank Praznik
Add raw_request, set_raw_report and output_report transport-driver functions to the USB HID driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-28HID: usbhid: quirk for CY-TM75 75 inch Touch OverlayYufeng Shen
There is timeout error during initialization: kernel: [ 11.733104] hid-multitouch 0003:1870:0110.0001: usb_submit_urb(ctrl) failed: -1 kernel: [ 11.734093] hid-multitouch 0003:1870:0110.0001: timeout initializing reports Adding quirk HID_QUIRK_NO_INIT_REPORTS can solve the problem. Signed-off-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-13HID: add support for SiS multitouch panel in the touch monitor LG 23ET83VEmanuel Krenz
[jkosina@suse.cz: refresh to apply after SIS quirk merging] Signed-off-by: Emanuel Krenz <emanuelkrenz@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: quirk for Synaptics Quad HD touchscreenAceLan Kao
Add Synaptics HD touchscreen(06cb:1ac3) to no init report quirk Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: quirk for Synaptics HD touchscreenAceLan Kao
Add Synaptics HD touchscreen(06cb:0ac3) to no init report quirk. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: merge the sis quirkAceLan Kao
USB_VENDOR_ID_SIS and USB_VENDOR_ID_SIS2_TOUCH are identical, so refine the code and merge the quirks. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-19HID: usbkbd: fix inconsistent debugging outputAdam Cozzette
It looks like this typo was introduced by a mistake in a copy-and-paste in commit ddbe32491951. Signed-off-by: Adam Cozzette <acozzette@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-16Merge branches 'for-3.12/upstream-fixes', 'for-3.13/holtek', ↵Jiri Kosina
'for-3.13/i2c-hid', 'for-3.13/logitech', 'for-3.13/multitouch', 'for-3.13/roccat', 'for-3.13/upstream' and 'for-3.13/wiimote' into for-linus
2013-10-25HID: hid-multitouch: add support for SiS panelsForest Bond
Add support for SiS multitouch panels. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-09HID: usbhid: quirk for SiS TouchscreenAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1180881 This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. [12431.828467] hid-multitouch 0003:0457:1013.0475: usb_submit_urb(ctrl) failed: -1 [12431.828507] hid-multitouch 0003:0457:1013.0475: timeout initializing reports Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-09HID: usbhid: quirk for Synaptics Large TouchccreenAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1180881 Synaptics large touchscreen doesn't support some of the report request while initializing. The unspoorted request will make the device unreachable, and will lead to the following usb_submit_urb() function call timeout. So, add the IDs into HID_QUIRK_NO_INIT_REPORTS quirk. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-06Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', ↵Jiri Kosina
'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus
2013-09-02HID: usbhid: quirk for N-Trig DuoSense Touch ScreenVasily Titskiy
The DuoSense touchscreen device causes a 10 second timeout. This fix removes the delay. Signed-off-by: Vasily Titskiy <qehgt0@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27HID: do not init input reports for Win 8 multitouch devicesBenjamin Tissoires
Some multitouch screens do not like to be polled for input reports. However, the Win8 spec says that all touches should be sent during each report, making the initialization of reports unnecessary. The Win7 spec is less precise, so do not use this for those devices. Add the quirk HID_QUIRK_NO_INIT_INPUT_REPORTS so that we do not have to introduce a quirk for each problematic device. This quirk makes the driver behave the same way the Win 8 does. It actually retrieves the features, but not the inputs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-31HID: usbhid: use generic hidinput_input_event()David Herrmann
HID core provides the same functionality as we do, so drop the custom hidinput_input_event() handler. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-31HID: usbhid: update LED fields unlockedDavid Herrmann
Report fields can be updated from HID drivers unlocked via hid_set_field(). It is protected by input_lock in HID core so only a single input event is handled at a time. USBHID can thus update the field unlocked and doesn't conflict with any HID vendor/device drivers. Note, many HID drivers make heavy use of hid_set_field() in that way. But usbhid also schedules a work to gather multiple LED changes in a single report. Hence, we used to lock the LED field update so the work can read a consistent state. However, hid_set_field() only writes a single integer field, which is guaranteed to be allocated all the time. So the worst possible race-condition is a garbage read on the LED field. Therefore, there is no need to protect the update. In fact, the only thing that is prevented by locking hid_set_field(), is an LED update while the scheduled work currently writes an older LED update out. However, this means, a new work is scheduled directly when the old one is done writing the new state to the device. So we actually _win_ by not protecting the write and allowing the write to be combined with the current write. A new worker is still scheduled, but will not write any new state. So the LED will not blink unnecessarily on the device. Assume we have the LED set to 0. Two request come in which enable the LED and immediately disable it. The current situation with two CPUs would be: usb_hidinput_input_event() | hid_led() ---------------------------------+---------------------------------- spin_lock(&usbhid->lock); hid_set_field(1); spin_unlock(&usbhid->lock); schedule_work(...); spin_lock(&usbhid->lock); __usbhid_submit_report(..1..); spin_unlock(&usbhid->lock); spin_lock(&usbhid->lock); hid_set_field(0); spin_unlock(&usbhid->lock); schedule_work(...); spin_lock(&usbhid->lock); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); With the locking removed, we _might_ end up with (look at the changed __usbhid_submit_report() parameters in the first try!): usb_hidinput_input_event() | hid_led() ---------------------------------+---------------------------------- hid_set_field(1); schedule_work(...); spin_lock(&usbhid->lock); hid_set_field(0); schedule_work(...); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); ... next work ... spin_lock(&usbhid->lock); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); As one can see, we no longer send the "LED ON" signal as it is disabled immediately afterwards and the following "LED OFF" request overwrites the pending "LED ON". It is important to note that hid_set_field() is not atomic, so we might also end up with any other value. But that doesn't matter either as we _always_ schedule the next work with a correct value and schedule_work() acts as memory barrier, anyways. So in the worst case, we run __usbhid_submit_report(..<garbage>..) in the first case and the following __usbhid_submit_report() will write the correct value. But LED states are booleans so any garbage will be converted to either 0 or 1 and the remote device will never see invalid requests. Why all this? It avoids any custom locking around hid_set_field() in usbhid and finally allows us to provide a generic hidinput_input_event() handler for all HID transport drivers. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-31HID: usbhid: make usbhid_set_leds() staticDavid Herrmann
usbhid_set_leds() is only used inside of usbhid/hid-core.c so no need to export it. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-22HID: fix data access in implement()Jiri Kosina
implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - hid driver transport cleanup, finalizing the long-desired decoupling of core from transport layers, by Benjamin Tissoires and Henrik Rydberg - support for hybrid finger/pen multitouch HID devices, by Benjamin Tissoires - fix for long-standing issue in Logitech unifying driver sometimes not inializing properly due to device specifics, by Andrew de los Reyes - Wii remote driver updates to support 2nd generation of devices, by David Herrmann - support for Apple IR remote - roccat driver now supports new devices (Roccat Kone Pure, IskuFX), by Stefan Achatz - debugfs locking fixes in hid debug interface, by Jiri Kosina * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits) HID: protect hid_debug_list HID: debug: break out hid_dump_report() into hid-debug HID: Add PID for Japanese version of NE4K keyboard HID: hid-lg4ff add support for new version of DFGT wheel HID: icade: u16 which never < 0 HID: clarify Magic Mouse Kconfig description HID: appleir: add support for Apple ir devices HID: roccat: added media key support for Kone HID: hid-lenovo-tpkbd: remove doubled hid_get_drvdata HID: i2c-hid: fix length for set/get report in i2c hid HID: wiimote: parse reduced status reports HID: wiimote: add 2nd generation Wii Remote IDs HID: wiimote: use unique battery names HID: hidraw: warn if userspace headers are outdated HID: multitouch: force BTN_STYLUS for pen devices HID: multitouch: append " Pen" to the name of the stylus input HID: multitouch: add handling for pen in dual-sensors device HID: multitouch: change touch sensor detection in mt_input_configured() HID: multitouch: do not map usage from non used reports HID: multitouch: breaks out touch handling in specific functions ...
2013-04-30Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', ↵Jiri Kosina
'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus
2013-04-01Merge v3.9-rc5 into usb-nextGreg Kroah-Hartman
We want the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USBHID: don't recover device if suspend fails in system sleepMing Lei
If suspend callback fails in system sleep context, usb core will ignore the failure and let the system sleep go ahead further, so this patch doesn't recover device under this situation, otherwise may cause resume() confused. Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18HID: usbhid: fix build problemJiri Kosina
Fix build problem caused by typo introduced by 620ae90ed8 ("HID: usbhid: quirk for MSI GX680R led panel"). Reported-by: fengguang.wu@intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-18HID: usbhid: quirk for MSI GX680R led panelJosh Boyer
This keyboard backlight device causes a 10 second delay to boot. Add it to the quirk list with HID_QUIRK_NO_INIT_REPORTS. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221 Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-18HID: usbhid: quirk for Realtek Multi-card readerJosh Boyer
This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587 Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-07HID: ll_driver: Extend the interface with idle requestsBenjamin Tissoires
Some drivers send the idle command directly to underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds hid_hw_idle() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_wait() instead of direct call to usbhidBenjamin Tissoires
This removes most of the dependencies between hid drivers and usbhid. The patch was constructed by replacing all occurences of usbhid_wait_io() by its hid_hw_wait() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. As of today, few drivers are still requiring an explicit USB layer dependency: * ntrig (a patch is on its way) * multitouch (one patch following and another on its way) * lenovo tpkbd * roccat * sony The last three are two deeply using direct calls to the usb subsystem to be able to be cleaned right now. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_request() instead of direct call to usbhidBenjamin Tissoires
This allows the hid drivers to be independent from the transport layer. The patch was constructed by replacing all occurences of usbhid_submit_report() by its hid_hw_request() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. Finally, few drivers still depends on USB_HID. Many of them are requiring the io wait callback. They are found in the next patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> For the sensor-hub part: Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: Extend the interface with wait io requestHenrik Rydberg
Some drivers need to wait for an io from the underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds wait() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: Extend the interface with report requestsHenrik Rydberg
Some drivers send reports directly to underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds hid_hw_request() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: usbhid: quirk for Formosa IR receiverNicholas Santos
Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10 second timeout when the usbhid driver attempts to initialze the device. Adding this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the delay. Signed-off-by: Nicholas Santos <nicholas.santos@gmail.com> [jkosina@suse.cz: fix ordering] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', ↵Jiri Kosina
'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2012-11-28HID: hiddev: fix nonblocking read semantics wrt EIO/ERESTARTSYSJiri Kosina
When the file has been open in non-blocking mode, EIO or ERESTARTSYS would never be returned even if they should (for example when device has been unplugged, you want EIO and not EAGAIN to be returned). Move the O_NONBLOCK check after other checks have been performed. Base on similar patch done to hidraw by Founder Fang <founder.fang@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26HID: add quirk for Freescale i.MX23 ROM recoveryMarek Vasut
The USB recovery mode present in i.MX23 ROM emulates USB HID. It needs this quirk to behave properly. Even if the official branding of the chip is Freescale i.MX23, I named it Sigmatel STMP3780 since that's what the chip really is and it even reports itself as STMP3780. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-22HID: add support to novatec wireless mouseMarco Biscaro
This patch adds support to Novatec wireless mouse (device ID 0603:1602). Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031 Signed-off-by: Marco Biscaro <marcobiscaro2112@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-16HID: hiddev: Remove redundant check on unsigned variableTushar Behera
No need to check whether unsigned variable is less than 0. CC: Jiri Kosina <jkosina@suse.cz> CC: linux-usb@vger.kernel.org CC: linux-input@vger.kernel.org Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15HID: usbhid: add quirk HID_QUIRK_NOGET to TPV optical touchscreenBenjamin Tissoires
Without this, the device is blocked in dmesg at: hid-multitouch 0003:25AA:8883.000X: usb_submit_urb(ctrl) failed: -1 hid-multitouch 0003:25AA:8883.000X: timeout initializing reports Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/usbhid/hid-quirks.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 23:39:43 +0000