| Age | Commit message (Collapse) | Author |
|---|
|
The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while. Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows m68k q40 systems to switch from the deprecated IDE subsystem
to libata.
Enhance the byte-swapping falconide and pata_falcon platform drivers to
accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem
to co-exist with q40 IRQ arrangements without too much mess.
The new IO resources were added solely for the purpose of making
request_region() reservations identical to those made by q40ide: these
regions aren't used for actual IO.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.
This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.
BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ide fix from Jens Axboe:
"This is a leftover fix from 5.11, where I forgot to ship it your way"
* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
ide/falconide: Fix module unload
|
|
We can remove 'q' from blk_execute_rq as well after the previous change
in blk_execute_rq_nowait.
And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.
Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unloading the falconide module results in a crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
Oops: 00000000
Modules linked in: falconide(-)
PC: [<002930b2>] ide_host_remove+0x2e/0x1d2
SR: 2000 SP: 00b49e28 a2: 009b0f90
d0: 00000000 d1: 009b0f90 d2: 00000000 d3: 00b48000
d4: 003cef32 d5: 00299188 a0: 0086d000 a1: 0086d000
Process rmmod (pid: 322, task=009b0f90)
Frame format=7 eff addr=00000000 ssw=0505 faddr=00000000
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 00000000 00018da9
push data: 00000000 00000000 00000000 00000000
Stack from 00b49e90:
004c456a 0027f176 0027cb0a 0027cb9e 00000000 0086d00a 2187d3f0 0027f0e0
00b49ebc 2187d1f6 00000000 00b49ec8 002811e8 0086d000 00b49ef0 0028024c
0086d00a 002800d6 00279a1a 00000001 00000001 0086d00a 2187d3f0 00279a58
00b49f1c 002802e0 0086d00a 2187d3f0 004c456a 0086d00a ef96af74 00000000
2187d3f0 002805d2 800de064 00b49f44 0027f088 2187d3f0 00ac1cf4 2187d3f0
004c43be 2187d3f0 00000000 2187d3f0 800b66a8 00b49f5c 00280776 2187d3f0
Call Trace: [<0027f176>] __device_driver_unlock+0x0/0x48
[<0027cb0a>] device_links_busy+0x0/0x94
[<0027cb9e>] device_links_unbind_consumers+0x0/0x130
[<0027f0e0>] __device_driver_lock+0x0/0x5a
[<2187d1f6>] falconide_remove+0x12/0x18 [falconide]
[<002811e8>] platform_drv_remove+0x1c/0x28
[<0028024c>] device_release_driver_internal+0x176/0x17c
[<002800d6>] device_release_driver_internal+0x0/0x17c
[<00279a1a>] get_device+0x0/0x22
[<00279a58>] put_device+0x0/0x18
[<002802e0>] driver_detach+0x56/0x82
[<002805d2>] driver_remove_file+0x0/0x24
[<0027f088>] bus_remove_driver+0x4c/0xa4
[<00280776>] driver_unregister+0x28/0x5a
[<00281a00>] platform_driver_unregister+0x12/0x18
[<2187d2a0>] ide_falcon_driver_exit+0x10/0x16 [falconide]
[<000764f0>] sys_delete_module+0x110/0x1f2
[<000e83ea>] sys_rename+0x1a/0x1e
[<00002e0c>] syscall+0x8/0xc
[<00188004>] ext4_multi_mount_protect+0x35a/0x3ce
Code: 0029 9188 4bf9 0027 aa1c 283c 003c ef32 <265c> 4a8b 6700 00b8 2043 2028 000c 0280 00ff ff00 6600 0176 40c0 7202 b2b9 004c
Disabling lock debugging due to kernel taint
This happens because the driver_data pointer is uninitialized.
Add the missing platform_set_drvdata() call. For clarity, use the
matching platform_get_drvdata() as well.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers")
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
|
|
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
In the discussion about preempt count consistency across kernel
configurations:
https://lore.kernel.org/r/20200914204209.256266093@linutronix.de/
it was concluded that the usage of in_interrupt() and related context
checks should be removed from non-core code.
Both BUG_ON()s in ide-probe.c were introduced in commit
4015c949fb465 ("[PATCH] update ide core")
when ide_unregister() was extended with semaphore based locking. Both
checks won't complain about disabled preemption which is also wrong.
The might_sleep() in today's mutex_lock() will complain about the
missuses.
Remove the BUG_ON() statements.
Link: https://lkml.kernel.org/r/20201120092421.1023428-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
falconide_get_lock() is called by ide_lock_host() and its caller
(ide_issue_rq()) has already a might_sleep() check.
stdma_lock() has wait_event() which also has a might_sleep() check.
Remove the in_interrupt() check.
Link: https://lkml.kernel.org/r/20201113161021.2217361-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is another step that prepares for the removal of RQF_PREEMPT.
Link: https://lore.kernel.org/r/20201209052951.16136-5-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
RQF_PREEMPT is used for two different purposes in the legacy IDE code:
1. To mark power management requests.
2. To mark requests that should preempt another request. An (old)
explanation of that feature is as follows: "The IDE driver in the Linux
kernel normally uses a series of busywait delays during its
initialization. When the driver executes these busywaits, the kernel
does nothing for the duration of the wait. The time spent in these
waits could be used for other initialization activities, if they could
be run concurrently with these waits.
More specifically, busywait-style delays such as udelay() in module
init functions inhibit kernel preemption because the Big Kernel Lock is
held, while yielding APIs such as schedule_timeout() allow
preemption. This is true because the kernel handles the BKL specially
and releases and reacquires it across reschedules allowed by the
current thread.
This IDE-preempt specification requires that the driver eliminate these
busywaits and replace them with a mechanism that allows other work to
proceed while the IDE driver is initializing."
Since I haven't found an implementation of (2), do not set the PREEMPT flag
for sense requests. This patch causes sense requests to be postponed while
a drive is suspended instead of being submitted to ide_queue_rq().
If it would ever be necessary to restore the IDE PREEMPT functionality,
that can be done by introducing a new flag in struct ide_request.
Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ide is the last user of the blk_register_region framework except for the
tracking of allocated gendisk. Switch to __register_blkdev, even if that
doesn't allow us to trivially find out which command set to probe for.
That means we now always request all modules when a user tries to access
an unclaimed ide device node, but except for a few potentially loaded
modules for a fringe use case of a deprecated and soon to be removed
driver that doesn't make a difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to ever register the fake gendisk used for ide-tape.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Conversion of the Mac IDE driver to a platform driver
- Minor cleanups and fixes
* tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
ide/macide: Convert Mac IDE driver to platform driver
m68k: Replace HTTP links with HTTPS ones
m68k: mm: Remove superfluous memblock_alloc*() casts
m68k: mm: Use PAGE_ALIGNED() helper
m68k: Sort selects in main Kconfig
m68k: amiga: Clean up Amiga hardware configuration
m68k: Revive _TIF_* masks
m68k: Correct some typos in comments
m68k: Use get_kernel_nofault() in show_registers()
zorro: Fix address space collision message with RAM expansion boards
m68k: amiga: Fix Denise detection on OCS
|
|
Add platform devices for the Mac IDE controller variants. Convert the
macide module into a platform driver to support two of those variants.
For the third, use a generic "pata_platform" driver instead.
This enables automatic loading of the appropriate module and begins
the process of replacing the driver with libata alternatives.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Joshua Thompson <funaho@jurai.org>
References: commit 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers")
References: commit 7ad19a99ad431 ("ide: officially deprecated the legacy IDE driver")
Link: https://lore.kernel.org/r/edd106dad1bbea32500601c6071f37a9f02a8004.1600901284.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add a littler helper to make the somewhat arcane bd_contains checks a
little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ide-gd is only using the disk events mechanism to be able to force an
invalidation and partition scan on opening removable media. Just open
code the logic without invoving the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just merge the trivial function into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to use bdev_check_media_changed instead of check_disk_change and
call idecd_revalidate_disk manually. Given that idecd_revalidate_disk
only re-reads the TOC, and we already do the same at probe time, the
extra call into ->revalidate_disk from bdev_disk_changed is not required
either, so stop wiring up the method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings (e.g.
"unused variable"). If the compiler thinks it is uninitialized, either
simply initialize the variable or make compiler changes. As a precursor
to removing[2] this[3] macro[4], just remove this variable since it was
actually unused:
drivers/ide/ide-taskfile.c:232:34: warning: unused variable 'flags' [-Wunused-variable]
unsigned long uninitialized_var(flags);
^
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Fixes: ce1e518190ea ("ide: don't disable interrupts during kmap_atomic()")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Give the cdrom_read_tocentry function and ide_ prefix to not conflict
with the soon to be added generic function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a pointer to the CDROM information structure to struct gendisk.
This will allow various removable media file systems to call directly
into the CDROM layer instead of abusing ioctls with kernel pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue. Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drivers/ide/ide-scan-pci.c: In function 'ide_scan_pcibus':
>> drivers/ide/ide-scan-pci.c:104:13: error: incompatible type for argument 1 of 'list_del'
104 | list_del(d->node);
| ~^~~~~~
| |
| struct list_head
In file included from include/linux/module.h:12,
from drivers/ide/ide-scan-pci.c:12:
include/linux/list.h:144:47: note: expected 'struct list_head *' but argument is of type 'struct list_head'
144 | static inline void list_del(struct list_head *entry)
| ~~~~~~~~~~~~~~~~~~^~~~~
Fixes: 6a0033457f23 ("drivers/ide: convert to list_for_each_entry_safe()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use list_for_each_entry_safe() instead of list_for_each_safe()
to simplify the code.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux 5.6
|
|
Commit 54ff4a1d1732 ("MIPS: Alchemy: pata_platform for DB1200")
from year 2014 converted the only user of au1xxx-ide IDE host
driver (MIPS Alchemy DB1200 platform) to use pata_platform
libata host driver instead. This patch removes dead au1xxx-ide
driver code.
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
appropriate places
Arnd Bergmann inadvertently typoed these in d320a9551e394 and 64cbfa96551a;
they seem to be the cause of
https://bugzilla.redhat.com/show_bug.cgi?id=1801353 , invalid SCSI commands
when udev tries to query a DVD drive.
[arnd] Found another instance of the same bug, also introduced in my
compat_ioctl series.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801353
Link: https://lore.kernel.org/r/20200219165139.3467320-1-arnd@arndb.de
Fixes: c103d6ee69f9 ("compat_ioctl: ide: floppy: add handler")
Fixes: 64cbfa96551a ("compat_ioctl: move cdrom commands into cdrom.c")
Fixes: d320a9551e39 ("compat_ioctl: scsi: move ioctl handling into drivers")
Bisected-by: Chris Murphy <bugzilla@colorremedies.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull IDE updates from David Miller:
1) Fix mem region name in tx4949ide driver, from Christophe JAILLET.
2) Make drive->dn read only, it should not be changeable by users. From
Dan Carpenter.
3) Several cast fixups from Krzysztof Kozlowski.
There is also going to be a removal of a now unused IDE driver, but that
will come via the MIPS tree.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: make drive->dn read only
ide: serverworks: potential overflow in svwks_set_pio_mode()
cmd64x: potential buffer overflow in cmd64x_program_timings()
ide: remove unneeded header include path to drivers/ide
ide: qd65xx: Fix cast to pointer from integer of different size
ide: ht6560b: Fix cast to pointer from integer of different size
ide: remove set but not used variable 'hwif'
ide: remove unnecessary touch_softlockup_watchdog
ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' call
ide: Use dev_get_drvdata where possible
|
|
The IDE core always sets ->dn correctly so changing it is never
required.
Setting it to a different value than assigned by IDE core is very likely
to result in data corruption (due to wrong transfer timings being set on
the controller etc.)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "drive->dn" variable is a u8 controlled by root.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "drive->dn" value is a u8 and it is controlled by root only, but
it could be out of bounds here so let's check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I can build drivers/ide/ without this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Integer passed as pointer to drvdata should be cast to unsigned long to
avoid warning (compile testing on alpha architecture):
drivers/ide/qd65xx.c: In function ‘qd6580_init_dev’:
drivers/ide/qd65xx.c:312:27: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Integer passed as pointer to drvdata should be cast to unsigned long to
avoid warning (compile testing on alpha architecture):
drivers/ide/ht6560b.c: In function ‘ht6560b_init_dev’:
drivers/ide/ht6560b.c:318:27: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following gcc warning:
drivers/ide/pmac.c: In function pmac_ide_setup_device:
drivers/ide/pmac.c:1027:14: warning: variable hwif set but not used
[-Wunused-but-set-variable]
Fixes: d58b0c39e32f ("powerpc/macio: Rework hotplug media bay support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call touch_softlockup_watchdog before touch_nmi_watchdog is not needed,
since touch_softlockup_watchdog is called inside touch_nmi_watchdog.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This should be "tx4939ide" instead of "tx4938ide", but here MODNAME is even
better.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the HDIO ioctls are only used by the obsolete drivers/ide
subsystem, these can be handled by changing ide_cmd_ioctl() to be aware
of compat mode and doing the correct transformations in place and using
it as both native and compat handlers for all drivers.
The SCSI drivers implementing the same commands are already doing
this in the drivers, so the compat_blkdev_driver_ioctl() function
is no longer needed now.
The BLKSECTSET and HDIO_GETGEO_BIG ioctls are not implemented
in any driver any more and no longer need any conversion.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no need for the special cases for the cdrom ioctls any more now,
so make sure that each cdrom driver has a .compat_ioctl() callback and
calls cdrom_compat_ioctl() directly there.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rather than relying on fs/compat_ioctl.c, this adds support
for a compat_ioctl() callback in the ide-floppy driver directly,
which lets it translate the scsi commands.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
|
