aboutsummaryrefslogtreecommitdiff
path: root/drivers/idle/intel_idle.c
AgeCommit message (Collapse)Author
2013-02-13intel_idle: export both C1 and C1ELen Brown
Here we disable HW promotion of C1 to C1E and export both C1 and C1E and distinct C-states. This allows a cpuidle governor to choose a lower latency C-state than C1E when necessary to satisfy performance and QOS constraints -- and still save power versus polling. This also corrects the erroneous latency previously reported for C1E -- it is 10usec, not 1usec. Note that if you use "intel_idle.max_cstate=N", then you must increment N by 1 to get the same behavior after this change. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08intel_idle: remove assumption of one C-state per MWAIT flagLen Brown
Remove the assumption that cstate_tables are indexed by MWAIT flag values. Each entry identifies itself via its own flags value. This change is needed to support multiple states that share the same MWAIT flags. Note that this can have an effect on what state is described by 'N' on cmdline intel_idle.max_cstate=N on some systems. intel_idle.max_cstate=0 still disables the driver intel_idle.max_cstate=1 still results in just C1(E) However, "place holders" in the sparse C-state name-space (eg. Atom) have been removed. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08intel_idle: remove use and definition of MWAIT_MAX_NUM_CSTATESLen Brown
Cosmetic only. Replace use of MWAIT_MAX_NUM_CSTATES with CPUIDLE_STATE_MAX. They are both 8, so this patch has no functional change. The reason to change is that intel_idle will soon be able to export more than the 8 "major" states supported by MWAIT. When we hit that limit, it is important to know where the limit comes from. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08intel_idle: support HaswellLen Brown
This patch enables intel_idle to run on the next-generation Intel(R) Microarchitecture code named "Haswell". Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-01intel_idle: stop using driver_data for static flagsLen Brown
The commit, 4202735e8ab6ecfb0381631a0d0b58fefe0bd4e2 (cpuidle: Split cpuidle_state structure and move per-cpu statistics fields) observed that the MWAIT flags for Cn on every processor to date were the same, and created get_driver_data() to supply them. Unfortunately, that assumption is false, going forward. So here we restore the MWAIT flags to the cpuidle_state table. However, instead restoring the old "driver_data" field, we put the flags into the existing "flags" field, where they probalby should have lived all along. This patch does not change any operation. This patch removes 1 of the 3 users of cpuidle_state_usage.driver_data. Perhaps some day we'll get rid of the other 2. Signed-off-by: Len Brown <len.brown@intel.com>
2013-01-18intel_idle: Don't register CPU notifier if we are not running.Konrad Rzeszutek Wilk
The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff814d956c>] [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [<ffffffff8107f2d0>] ? collect_cpu_info_local+0x30/0x30 [<ffffffff810c2fb7>] ? __might_sleep+0xe7/0x100 [<ffffffff814d9882>] cpuidle_register_device+0x32/0x70 [<ffffffff81340afd>] intel_idle_cpu_init+0xad/0x110 [<ffffffff81340bc8>] cpu_hotplug_notify+0x68/0x80 [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 [<ffffffff811a1024>] vfs_write+0xb4/0x130 [<ffffffff811a17ea>] sys_write+0x5a/0xa0 [<ffffffff816643a9>] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP <ffff88009dacfcb8> This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: 3.6+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03intel_idle: pr_debug information need separatedYouquan Song
When debug kernel, the the below information is found: intel_idle: unaware of model 0x1a MWAIT 4 please contact lenb@kernel.orgACPI: Device input0 -> No ACPI support so this patch separates it. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpuidle: Measure idle state durations with monotonic clockJulius Werner
Many cpuidle drivers measure their time spent in an idle state by reading the wallclock time before and after idling and calculating the difference. This leads to erroneous results when the wallclock time gets updated by another processor in the meantime, adding that clock adjustment to the idle state's time counter. If the clock adjustment was negative, the result is even worse due to an erroneous cast from int to unsigned long long of the last_residency variable. The negative 32 bit integer will zero-extend and result in a forward time jump of roughly four billion milliseconds or 1.3 hours on the idle state residency counter. This patch changes all affected cpuidle drivers to either use the monotonic clock for their measurements or make use of the generic time measurement wrapper in cpuidle.c, which was already working correctly. Some superfluous CLIs/STIs in the ACPI code are removed (interrupts should always already be disabled before entering the idle function, and not get reenabled until the generic wrapper has performed its second measurement). It also removes the erroneous cast, making sure that negative residency values are applied correctly even though they should not appear anymore. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-09-26intel_idle: enable IVB Xeon supportLen Brown
IVB Xeon currently shares the same parameters IVB client. Signed-off-by: Len Brown <len.brown@intel.com>
2012-08-17intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it.Konrad Rzeszutek Wilk
If the machine is booted without any cpu_idle driver set (b/c disable_cpuidle() has been called) we should follow other users of cpu_idle API and check the return value for NULL before using it. Reported-and-tested-by: Mark van Dijk <mark@internecto.net> Suggested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
2012-07-05ACPI: intel_idle : break dependency between modulesDaniel Lezcano
When the system is booted with some cpus offline, the idle driver is not initialized. When a cpu is set online, the acpi code call the intel idle init function. Unfortunately this code introduce a dependency between intel_idle and acpi. This patch is intended to remove this dependency by using the notifier of intel_idle. This patch has the benefit of encapsulating the intel_idle driver and remove some exported functions. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-05intel_idle: initial IVB supportLen Brown
From an OS point of view, IVB looks like SNB, but quicker. Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-21drivers/idle/intel_idle.c: fix confusing code identationMarcos Paulo de Souza
Fix a code indentation in the function intel_idle_cpu_init that looks confusing.o Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-15intel_idle: Revert change of auto_demotion_disable_flags for NehalemBen Hutchings
Commit b66b8b9a4a79087dde1b358a016e5c8739ccf186 ('intel-idle: convert to x86_cpu_id auto probing') added a distinction between Nehalem and Westemere processors and changed auto_demotion_disable_flags for the former to 0. This was not explained in the commit message, so change it back. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13intel_idle: Fix ID for Nehalem-EX Xeon in device ID tableBen Hutchings
Commit b66b8b9a4a79087dde1b358a016e5c8739ccf186 ('intel-idle: convert to x86_cpu_id auto probing') put two entries for model 0x2f (Westmere-EX Xeon) in the device ID table and left out model 0x2e (Nehalem-EX Xeon). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26intel-idle: convert to x86_cpu_id auto probingAndi Kleen
With this it should be automatically loaded on suitable systems by udev. The old switch () is replaced with a table based approach, this also cleans up the code. Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-19ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged coresThomas Renninger
Delay the setting up of features (cpuidle, throttling by calling acpi_processor_start()) to the time when the hotplugged core got onlined the first time and got fully initialized. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-18Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into ↵Len Brown
release
2012-01-17intel_idle: Split up and provide per CPU initialization funcThomas Renninger
Function split up, should have no functional change. Provides entry point for physically hotplugged CPUs to initialize and activate cpuidle. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> CC: Shaohua Li <shaohua.li@intel.com> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17intel idle: Make idle driver more robustThomas Renninger
kvm -cpu host passes the original cpuid info to the guest. Latest kvm version seem to return true for mwait_leaf cpuid function on recent Intel CPUs. But it does not return mwait C-states (mwait_substates), instead zero is returned. While real CPUs seem to always return non-zero values, the intel idle driver should not get active in kvm (mwait_substates == 0) case and bail out. Otherwise a Null pointer exception will happen later when the cpuidle subsystem tries to get active: [0.984807] BUG: unable to handle kernel NULL pointer dereference at (null) [0.984807] IP: [<(null)>] (null) ... [0.984807][<ffffffff8143cf34>] ? cpuidle_idle_call+0xb4/0x340 [0.984807][<ffffffff8159e7bc>] ? __atomic_notifier_call_chain+0x4c/0x70 [0.984807][<ffffffff81001198>] ? cpu_idle+0x78/0xd0 Reference: https://bugzilla.novell.com/show_bug.cgi?id=726296 Cc: stable@vger.kernel.org Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Bruno Friedmann <bruno@ioda-net.ch> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17intel_idle: Fix a cast to pointer from integer of different size warning in ↵David Howells
intel_idle Fix the following warning: drivers/idle/intel_idle.c: In function 'intel_idle_cpuidle_devices_init': drivers/idle/intel_idle.c:518:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] By making get_driver_data() return a long instead of an int. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17intel_idle: remove redundant local_irq_disable() callYanmin Zhang
irq disabling happens earlier in process_32.c:cpu_idle. Basically, cpuidle_state->enter is called, cpu irq is disabled. cpuidle_state->enter would turn on irq when exiting. intel_idle doesn't follow this assumption. Although it doesn't cause real issue, it misleads developers. Remove the call to local_irq_disable() at entry. [akpm@linux-foundation.org: add comment] Signed-off-by: Mingming Zhang <mingmingx.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17intel_idle: fix API misuseShaohua Li
smp_call_function() only lets all other CPUs execute a specific function, while we expect all CPUs do in intel_idle. Without the fix, we could have one cpu which has auto_demotion enabled or has no broadcast timer setup. Usually we don't see impact because auto demotion just harms power and the intel_idle init is called in CPU 0, where boradcast timer delivers interrupt, but this still could be a problem. Cc: stable@vger.kernel.org Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-06cpuidle: Single/Global registration of idle statesDeepthi Dharwar
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Split cpuidle_state structure and move per-cpu statistics fieldsDeepthi Dharwar
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Move dev->last_residency update to driver enter routine; remove ↵Deepthi Dharwar
dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-10-31x86: fix up files really needing to include module.hPaul Gortmaker
These files aren't just exporting symbols -- they are also defining a MODULE_LICENSE etc. so give them the full module.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-28intel_idle: Rename cpuidle statesThomas Renninger
Userspace apps might have to cut off parts off the idle state name for display reasons. Switch NHM-C1 to C1-NHM (and others) so that a cut off name is unique and makes sense to the user. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: lenb@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-17intel_idle: disable Atom/Lincroft HW C-state auto-demotionLen Brown
Just as we had to disable auto-demotion for NHM/WSM, we need to do the same for Atom (Lincroft version). In particular, auto-demotion will prevent Lincroft from entering the S0i3 idle power saving state. https://bugzilla.kernel.org/show_bug.cgi?id=25252 Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-17intel_idle: disable NHM/WSM HW C-state auto-demotionLen Brown
Hardware C-state auto-demotion is a mechanism where the HW overrides the OS C-state request, instead demoting to a shallower state, which is less expensive, but saves less power. Modern Linux should generally get exactly the states it requests. In particular, when a CPU is taken off-line, it must not be demoted, else it can prevent the entire package from reaching deep C-states. https://bugzilla.kernel.org/show_bug.cgi?id=25252 Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-25fix a shutdown regression in intel_idleShaohua Li
Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open broadcast clock event"). The clockevent framework can automatically shutdown broadcast timers for hotremove CPUs. And we get a shutdown regression when we shutdown broadcast timer for hot remove CPU, so just delete some code. Also fix some section mismatch. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-12Merge branch 'cpuidle-perf-events' into idle-testLen Brown
2011-01-12Merge branch 'linus' into idle-testLen Brown
2011-01-12cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle ↵Thomas Renninger
events from the cpuidle layer Currently intel_idle and acpi_idle driver show double cpu_idle "exit idle" events -> this patch fixes it and makes cpu_idle events throwing less complex. It also introduces cpu_idle events for all architectures which use the cpuidle subsystem, namely: - arch/arm/mach-at91/cpuidle.c - arch/arm/mach-davinci/cpuidle.c - arch/arm/mach-kirkwood/cpuidle.c - arch/arm/mach-omap2/cpuidle34xx.c - arch/drivers/acpi/processor_idle.c (for all cases, not only mwait) - arch/x86/kernel/process.c (did throw events before, but was a mess) - drivers/idle/intel_idle.c (did throw events before) Convention should be: Fire cpu_idle events inside the current pm_idle function (not somewhere down the the callee tree) to keep things easy. Current possible pm_idle functions in X86: c1e_idle, poll_idle, cpuidle_idle_call, mwait_idle, default_idle -> this is really easy is now. This affects userspace: The type field of the cpu_idle power event can now direclty get mapped to: /sys/devices/system/cpu/cpuX/cpuidle/stateX/{name,desc,usage,time,...} instead of throwing very CPU/mwait specific values. This change is not visible for the intel_idle driver. For the acpi_idle driver it should only be visible if the vendor misses out C-states in his BIOS. Another (perf timechart) patch reads out cpuidle info of cpu_idle events from: /sys/.../cpuidle/stateX/*, then the cpuidle events are mapped to the correct C-/cpuidle state again, even if e.g. vendors miss out C-states in their BIOS and for example only export C1 and C3. -> everything is fine. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Robert Schoene <robert.schoene@tu-dresden.de> CC: Jean Pihet <j-pihet@ti.com> CC: Arjan van de Ven <arjan@linux.intel.com> CC: Ingo Molnar <mingo@elte.hu> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: linux-pm@lists.linux-foundation.org CC: linux-acpi@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-perf-users@vger.kernel.org CC: linux-omap@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12intel_idle: open broadcast clock eventShaohua Li
Intel_idle driver uses CLOCK_EVT_NOTIFY_BROADCAST_ENTER CLOCK_EVT_NOTIFY_BROADCAST_EXIT for broadcast clock events. The _ENTER/_EXIT doesn't really open broadcast clock events, please see processor_idle.c for an example. In some situation, this will cause boot hang, because some CPUs enters idle but local APIC timer stalls. Reported-and-tested-by: Yan Zheng <zheng.z.yan@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> cc: stable@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idleLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI, intel_idle: Cleanup idle= internal variablesThomas Renninger
Having four variables for the same thing: idle_halt, idle_nomwait, force_mwait and boot_option_idle_overrides is rather confusing and unnecessary complex. if idle= boot param is passed, only set up one variable: boot_option_idle_overrides Introduces following functional changes/fixes: - intel_idle driver does not register if any idle=xy boot param is passed. - processor_idle.c will also not register a cpuidle driver and get active if idle=halt is passed. Before a cpuidle driver with one (C1, halt) state got registered Now the default_idle function will be used which finally uses the same idle call to enter sleep state (safe_halt()), but without registering a whole cpuidle driver. That means idle= param will always avoid cpuidle drivers to register with one exception (same behavior as before): idle=nomwait may still register acpi_idle cpuidle driver, but C1 will not use mwait, but hlt. This can be a workaround for IO based deeper sleep states where C1 mwait causes problems. Signed-off-by: Thomas Renninger <trenn@suse.de> cc: x86@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12intel_idle: update Sandy Bridge core C-state residency targetsLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-04perf: Clean up power events by introducing new, more generic onesThomas Renninger
Add these new power trace events: power:cpu_idle power:cpu_frequency power:machine_suspend The old C-state/idle accounting events: power:power_start power:power_end Have now a replacement (but we are still keeping the old tracepoints for compatibility): power:cpu_idle and power:power_frequency is replaced with: power:cpu_frequency power:machine_suspend is newly introduced. Jean Pihet has a patch integrated into the generic layer (kernel/power/suspend.c) which will make use of it. the type= field got removed from both, it was never used and the type is differed by the event type itself. perf timechart userspace tool gets adjusted in a separate patch. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04perf: Do not export power_frequency, but power_start eventThomas Renninger
power_frequency moved to drivers/cpufreq/cpufreq.c which has to be compiled in, no need to export it. intel_idle can a be module though... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2010-12-02intel_idle: recognize ARAT on WSM-EXLen Brown
We erroneously ignored the Always Running APIC Timer on WSM-EX. Move the check for ARAT down so that it can apply to any/all models. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: do not use the LAPIC timer for ATOM C2 intel_idle: add initial Sandy Bridge support acpi_idle: delete bogus data from cpuidle_state.power_usage intel_idle: delete bogus data from cpuidle_state.power_usage intel_idle: simplify test for leave_mm()
2010-10-26intel_idle: do not use the LAPIC timer for ATOM C2Len Brown
If we use the LAPIC timer during ATOM C2 on some nvidia chisets, the system stalls. https://bugzilla.kernel.org/show_bug.cgi?id=21032 Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23Merge branch 'intel_idle+snb' into idle-releaseLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23intel_idle: add initial Sandy Bridge supportLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-21Merge branch 'x86-idle-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line x86, hotplug: Move WBINVD back outside the play_dead loop x86, hotplug: Use mwait to offline a processor, fix the legacy case x86, mwait: Move mwait constants to a common header file
2010-10-15intel_idle: delete bogus data from cpuidle_state.power_usageLen Brown
The mW data in this field is a total fabrication and serves no purpose other than to mislead those who might see it in sysfs. Delete it. Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 12:48:56 +0000