| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- proper annotation of USB buffers in bcm5974 touchpad dirver
- a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F
- a fix for missing dependency in raspberrypi-ts driver to avoid
compile breakages with random configs.
* tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
Input: raspberrypi-ts - add missing HAS_IOMEM dependency
|
|
dmi_use_low_level_irq
Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.
Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.
usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"
Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
|
|
Since JOYSTICK_SENSEHAT selects MFD_SIMPLE_MFD_I2C and the latter
depends on HAS_IOMEM, and since 'select' does not follow any
dependency chains, JOYSTICK_SENSEHAT should also depend on HAS_IOMEM
to prevent a kconfig warning and a build error:
WARNING: unmet direct dependencies detected for MFD_SIMPLE_MFD_I2C
Depends on [n]: HAS_IOMEM [=n] && I2C [=y]
Selected by [y]:
- JOYSTICK_SENSEHAT [=y] && INPUT_JOYSTICK [=y] && INPUT [=y] && I2C [=y]
s390-linux-ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe':
simple-mfd-i2c.c:(.text+0xc8): undefined reference to `devm_mfd_add_devices'
Fixes: 41657514c796 ("Input: add Raspberry Pi Sense HAT joystick driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220531022942.16340-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS7222A/B/C capacitive touch controller
- a new driver for Raspberry Pi Sense HAT joystick
- sun4i-lradc-keys gained support of R329 and D1 variants, plus it can
be now used as a wakeup source
- pm8941-pwrkey can now properly handle PON GEN3 variants; the driver
also implements software debouncing and has a workaround for missing
key press events
- assorted driver fixes and cleanups
* tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: stmfts - do not leave device disabled in stmfts_input_open
Input: gpio-keys - cancel delayed work only in case of GPIO
Input: cypress_ps2 - fix typo in comment
Input: vmmouse - disable vmmouse before entering suspend mode
dt-bindings: google,cros-ec-keyb: Fixup bad compatible match
Input: cros-ec-keyb - allow skipping keyboard registration
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
Input: psmouse-smbus - avoid flush_scheduled_work() usage
Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Input: sun4i-lradc-keys - add support for R329 and D1
Input: sun4i-lradc-keys - add optional clock/reset support
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
Input: sun4i-lradc-keys - add wakeup support
Input: pm8941-pwrkey - simulate missed key press events
Input: pm8941-pwrkey - add software key press debouncing support
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Input: pm8941-pwrkey - fix error message
Input: synaptics-rmi4 - remove unnecessary flush_workqueue()
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
...
|
|
Prepare input updates for 5.19 merge window.
|
|
Instead of a virtual kernel address use a pointer of the associated
struct page as second parameter of gnttab_end_foreign_access().
Most users have that pointer available already and are creating the
virtual address from it, risking problems in case the memory is
located in highmem.
gnttab_end_foreign_access() itself won't need to get the struct page
from the address again.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
"This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which is
the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of
the mach/*.h headers to allow the platform to be part of a generic
ARMv4/v5 multiplatform kernel.
The last bit that enables this support is still missing here while we
wait for some last dependencies to make it into the mainline kernel
through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets
completed here along with a few additional cleanup. At the same time,
the s3c24xx and s3c64xx are now deprecated and expected to get removed
in the future.
The PXA and OMAP1 bits are in a separate branch because of
dependencies. Once both branches are merged, only the three Intel
StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
need separate kernels, and there are no plans to include these"
* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: ixp4xx: Consolidate Kconfig fixing issue
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: config: Refresh IXP4xx config after multiplatform
ARM: omap1: add back omap_set_dma_priority() stub
ARM: omap: fix missing declaration warnings
ARM: omap: fix address space warnings from sparse
ARM: spear: remove include/mach/ subdirectory
ARM: davinci: remove include/mach/ subdirectory
ARM: omap2: remove include/mach/ subdirectory
integrator: remove empty ap_init_early()
ARM: s3c: fix include path
MAINTAINERS: omap1: Add Janusz as an additional maintainer
ARM: omap1: htc_herald: fix typos in comments
ARM: OMAP1: fix typos in comments
ARM: OMAP1: clock: Remove noop code
ARM: OMAP1: clock: Remove unused code
ARM: OMAP1: clock: Fix UART rate reporting algorithm
ARM: OMAP1: clock: Fix early UART rate issues
ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
ARM: omap1: fix build with no SoC selected
...
|
|
The commit 26623eea0da3 attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.
Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.
Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.
This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:
[ 360.297569] ------------[ cut here ]------------
[ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
[ 360.310531] Modules linked in: gpio_keys(-)
[ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
[ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
[ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 360.338318] pc : __flush_work+0x414/0x470
[ 360.342385] lr : __cancel_work_timer+0x140/0x1b0
[ 360.347065] sp : ffff80000a7fba00
[ 360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000
[ 360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001
[ 360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000
[ 360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48
[ 360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40
[ 360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c
[ 360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008
[ 360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080
[ 360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458
[ 360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000
[ 360.422818] Call trace:
[ 360.425299] __flush_work+0x414/0x470
[ 360.429012] __cancel_work_timer+0x140/0x1b0
[ 360.433340] cancel_delayed_work_sync+0x10/0x18
[ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
[ 360.443327] devm_action_release+0x10/0x18
[ 360.447481] release_nodes+0x8c/0x1a0
[ 360.451194] devres_release_all+0x90/0x100
[ 360.455346] device_unbind_cleanup+0x14/0x60
[ 360.459677] device_release_driver_internal+0xe8/0x168
[ 360.464883] driver_detach+0x4c/0x90
[ 360.468509] bus_remove_driver+0x54/0xb0
[ 360.472485] driver_unregister+0x2c/0x58
[ 360.476462] platform_driver_unregister+0x10/0x18
[ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys]
[ 360.486088] __arm64_sys_delete_module+0x1e0/0x270
[ 360.490945] invoke_syscall+0x40/0xf8
[ 360.494661] el0_svc_common.constprop.3+0xf0/0x110
[ 360.499515] do_el0_svc+0x20/0x78
[ 360.502877] el0_svc+0x48/0xf8
[ 360.505977] el0t_64_sync_handler+0x88/0xb0
[ 360.510216] el0t_64_sync+0x148/0x14c
[ 360.513930] irq event stamp: 4306
[ 360.517288] hardirqs last enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0
[ 360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88
[ 360.534204] softirqs last enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0
[ 360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0
[ 360.550591] ---[ end trace 0000000000000000 ]---
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A small fixup to ili210x touchscreen driver, and updated maintainer
entry for the device tree binding of Mediatek 6779 keypad:
- fix reset timing of Ilitek touchscreens
- update maintainer entry of DT binding of Mediatek 6779 keypad"
* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ili210x - use one common reset implementation
Input: ili210x - fix reset timing
dt-bindings: input: mediatek,mt6779-keypad: update maintainer
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-27-Julia.Lawall@inria.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge changes to ChromeOS EC Keyboard driver.
|
|
Currently, when trying to suspend and resume with VirtualPS/2 VMMouse
there is an error message after resuming:
psmouse serio1: vmmouse: Unable to re-enable mouse when reconnecting, err: -6
and the mouse will no longer be operable, requiring full rescan to find a
another driver to use for the port.
This error is due to QEMU still generating PS2 events which the kernel is
not consuming until resume time, where they interfere with mouse
identification and ultimately resulting in an error getting
VMMOUSE_VERSION_ID.
Test scenario:
1) start virtual machine with qemu command "vmport=on"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in the kernel logs
Let's fix this by disabling the vmmouse in its reset handler. This will
notify qemu to stop vmmouse and remove the handler.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20220322021046.1087954-1-zhouzongmin@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.
This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.
Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If the device is a detachable (and therefore lacks full keyboard), we may
still want to load this driver because the device might have some other
buttons or switches (e.g. volume and power buttons or a tablet mode
switch). In such case we do not want to register the "main" keyboard device
to allow userspace detect when the detachable keyboard is disconnected and
adjust the system behavior for the tablet mode.
Originally it was suggested to simply skip keyboard registration if row and
columns properties didn't exist, but that approach did not convey the
intent strongly enough and also had a slight problem for migrating existing
DTBs without updating the kernel first, so it was decided to introduce new
google,cros-ec-keyb-switches to explicitly mark devices that only have
axillary buttons and switches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-3-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local psmouse_wq.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for kp->clk.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220516085511.10679-1-wanjiabing@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Now that we are using oneshot threaded IRQ this method is not used anymore.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[arnd: add the db1300 change as well]
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Instead of manually disabling and enabling interrupts and scheduling work
to access the device, let's use threaded oneshot interrupt handler. It
simplifies things.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To avoid a dependency on the pxa platform header files with
hardcoded registers, change the driver to call a wrapper
in the pxa2xx-ac97-lib that encapsulates all the other
ac97 stuff.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The two drivers are almost identical and can work on a variety
of hardware in principle. The mainstone driver supports additional
hardware, and the zylonite driver has a few cleanup patches.
Sync the two by adding the zylonite changes into the mainstone
one, and checking for the zylonite board to order to keep the
default behavior (interrupt enabled) there.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are two different ways of flushing the ac97 queue
in this driver, selected by a compile time option.
Change this to a runtime selection to make it work when both
are enabled.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-input@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The mach/mfp.h header is only used by this one driver
for hardcoded gpio numbers. Change that to use a lookup
table instead.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver hardcodes gpio numbers without a header file.
Use lookup tables instead.
Cc: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This LRADC variant uses the same 3/4*AVCC reference voltage as the A83T
variant. The R329 and D1 LRADCs appear to be identical, so D1 support is
accomplished through having the R329 LRADC as a fallback compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220414002349.24332-3-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Until the R329, the LRADC hardware was always active. Now it requires
enabling a clock gate and deasserting a reset line. Add support for this
variant of the hardware.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220414002349.24332-2-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow the driver to wake the system on key press if the "wakeup-source"
property is provided in the device tree. Using the LRADC as a wakeup
source requires keeping the AVCC domain active during sleep. Since this
has a nontrivial impact on power consumption (sometimes doubling it),
disable the LRADC wakeup source by default.
Signed-off-by: Ondrej Jirman <x@xff.cz>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The status of the keys connected to the KPDPWR_N and RESIN_N pins
is identified by reading corresponding bits in the interrupt real
time status register. If the status has changed by the time that
the interrupt is handled then a press event will be missed.
Maintain a last known status variable to find unbalanced release
events and simulate press events for each accordingly.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the
positive logic hardware debounced power key signal) may be seen
during the falling edge of KPDPWR_N (i.e. a power key press) when
it occurs close to the rising edge of SLEEP_CLK. This then
triggers a spurious KPDPWR interrupt.
Handle this issue by adding software debouncing support to ignore
key events that occur within the hardware debounce delay after the
most recent key release event.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-5-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently, PON address is read from the "reg" property. For PON GEN3,
which starts with PMK8350, the "reg" property will have both the PON
HLOS and PON PBS addesses defined. Add support so that all PON
generations can be configured.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-4-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently, error message reads "failed to set debounce". However,
code is attempting to read revision not set debounce. Fix this.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-3-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
All work currently pending will be done first by calling destroy_workqueue,
so there is unnecessary to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Link: https://lore.kernel.org/r/20220422093304.2781183-1-ran.jianping@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. This
makes the code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20220418015036.2556731-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD
key events when moved in any of the four directions and the BTN_SELECT
event when depressed.
Co-developed-by: Daniel Bauman <dbauman@redhat.com>
Signed-off-by: Daniel Bauman <dbauman@redhat.com>
Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://lore.kernel.org/r/20220419205158.28088-3-cmirabil@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Link: https://lore.kernel.org/r/20220420062725.25614-1-eagle.alexander923@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Link: https://lore.kernel.org/r/20220419064255.2563333-1-deng.changcheng@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new set of keycodes to be used by marine navigation systems
- minor fixes to omap4-keypad and cypress-sf drivers
* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: add Marine Navigation Keycodes
Input: omap4-keypad - fix pm_runtime_get_sync() error checking
Input: cypress-sf - register a callback to disable the regulators
|
|
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).
N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.
CC: Ville Syrjala <syrjala@sci.fi>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The omap-keypad driver currently relies on including mach/memory.h
implicitly, but that won't happen once omap1 is converted to
CONFIG_ARCH_MULTIPLATFORM. Include the required header
explicitly.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Variable ret is being assigned a value that is never read, it is
being re-assigned again in either path of the if statement. The
assignment is redundant and can be removed.
Cleans up clang scan build warning:
Although the value stored to 'ret' is used in the enclosing expression,
the value is never actually read from 'ret' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220418142457.84708-1-colin.i.king@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:
- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros
Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.
linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Select callers of iqs7222_parse_props() do not expect a child node
to be derived and returned via pointer. As such, these callers set
**child_node to NULL. However, this pointer is dereferenced in all
cases.
To solve this problem, dereference the pointer only for cases that
expect a child node in the first place. In these cases, the caller
provides a valid pointer.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If fwnode_property_count_u32() returns a negative error code then,
because of type promotion, the "count > ARRAY_SIZE(pins)" condition
will be true. The negative "count" is type promoted to a high unsigned
size_t value.
That means the "else if (count < 0)" condition will always be false and
we don't print that error message or propagate the error code from
fwnode_property_count_u32() as intended.
Fix this by re-ordering the checks so that we check for negative first.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220412153954.GA15406@kili
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
