aboutsummaryrefslogtreecommitdiff
path: root/drivers/iommu/intel-iommu.c
AgeCommit message (Collapse)Author
2019-08-09iommu/vt-d: Fix possible use-after-free of private domainLu Baolu
Multiple devices might share a private domain. One real example is a pci bridge and all devices behind it. When remove a private domain, make sure that it has been detached from all devices to avoid use-after-free case. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Detach domain before using a private oneLu Baolu
When the default domain of a group doesn't work for a device, the iommu driver will try to use a private domain. The domain which was previously attached to the device must be detached. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Reported-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lkml.org/lkml/2019/8/2/1379 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-06iommu/vt-d: Detach domain when move device out of groupLu Baolu
When removing a device from an iommu group, the domain should be detached from the device. Otherwise, the stale domain info will still be cached by the driver and the driver will refuse to attach any domain to the device again. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: b7297783c2bb6 ("iommu/vt-d: Remove duplicated code for device hotplug") Reported-and-tested-by: Vlad Buslov <vladbu@mellanox.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Link: https://lkml.org/lkml/2019/7/26/1133 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Check if domain->pgd was allocatedDmitry Safonov
There is a couple of places where on domain_init() failure domain_exit() is called. While currently domain_init() can fail only if alloc_pgtable_page() has failed. Make domain_exit() check if domain->pgd present, before calling domain_unmap(), as it theoretically should crash on clearing pte entries in dma_pte_clear_level(). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Don't queue_iova() if there is no flush queueDmitry Safonov
Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Avoid duplicated pci dma alias considerationLu Baolu
As we have abandoned the home-made lazy domain allocation and delegated the DMA domain life cycle up to the default domain mechanism defined in the generic iommu layer, we needn't consider pci alias anymore when mapping/unmapping the context entries. Without this fix, we see kernel NULL pointer dereference during pci device hot-plug test. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"Joerg Roedel
This reverts commit 123b2ffc376e1b3e9e015c75175b61e88a8b8518. This commit reportedly caused boot failures on some systems and needs to be reverted for now. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-04Merge branches 'x86/vt-d', 'x86/amd', 'arm/smmu', 'arm/omap', ↵Joerg Roedel
'generic-dma-ops' and 'core' into next
2019-06-22Revert "iommu/vt-d: Fix lock inversion between iommu->lock and ↵Peter Xu
device_domain_lock" This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu/vt-d: Silence a variable set but not usedQian Cai
The commit "iommu/vt-d: Probe DMA-capable ACPI name space devices" introduced a compilation warning due to the "iommu" variable in for_each_active_iommu() but never used the for each element, i.e, "drhd->iommu". drivers/iommu/intel-iommu.c: In function 'probe_acpi_namespace_devices': drivers/iommu/intel-iommu.c:4639:22: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct intel_iommu *iommu; Silence the warning the same way as in the commit d3ed71e5cc50 ("drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu/vt-d: Remove an unused variable "length"Qian Cai
The linux-next commit "iommu/vt-d: Duplicate iommu_resv_region objects per device list" [1] left out an unused variable, drivers/iommu/intel-iommu.c: In function 'dmar_parse_one_rmrr': drivers/iommu/intel-iommu.c:4014:9: warning: variable 'length' set but not used [-Wunused-but-set-variable] [1] https://lore.kernel.org/patchwork/patch/1083073/ Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-14Merge tag 'iommu-fixes-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three fixes for Intel VT-d to fix a potential dead-lock, a formatting fix and a bit setting fix - one fix for the ARM-SMMU to make it work on some platforms with sub-optimal SMMU emulation * tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Avoid constant zero in TLBI writes iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type
2019-06-12iommu/vt-d: Consolidate domain_init() to avoid duplicationLu Baolu
The domain_init() and md_domain_init() do almost the same job. Consolidate them to avoid duplication. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Cleanup after delegating DMA domain to generic iommuSai Praneeth Prakhya
[No functional changes] 1. Starting with commit df4f3c603aeb ("iommu/vt-d: Remove static identity map code") there are no callers for iommu_prepare_rmrr_dev() but the implementation of the function still exists, so remove it. Also, as a ripple effect remove get_domain_for_dev() and iommu_prepare_identity_map() because they aren't being used either. 2. Remove extra new line in couple of places. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()Lu Baolu
The drhd and device scope list should be iterated with the iommu global lock held. Otherwise, a suspicious RCU usage message will be displayed. [ 3.695886] ============================= [ 3.695917] WARNING: suspicious RCU usage [ 3.695950] 5.2.0-rc2+ #2467 Not tainted [ 3.695981] ----------------------------- [ 3.696014] drivers/iommu/intel-iommu.c:4569 suspicious rcu_dereference_check() usage! [ 3.696069] other info that might help us debug this: [ 3.696126] rcu_scheduler_active = 2, debug_locks = 1 [ 3.696173] no locks held by swapper/0/1. [ 3.696204] stack backtrace: [ 3.696241] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2467 [ 3.696370] Call Trace: [ 3.696404] dump_stack+0x85/0xcb [ 3.696441] intel_iommu_init+0x128c/0x13ce [ 3.696478] ? kmem_cache_free+0x16b/0x2c0 [ 3.696516] ? __fput+0x14b/0x270 [ 3.696550] ? __call_rcu+0xb7/0x300 [ 3.696583] ? get_max_files+0x10/0x10 [ 3.696631] ? set_debug_rodata+0x11/0x11 [ 3.696668] ? e820__memblock_setup+0x60/0x60 [ 3.696704] ? pci_iommu_init+0x16/0x3f [ 3.696737] ? set_debug_rodata+0x11/0x11 [ 3.696770] pci_iommu_init+0x16/0x3f [ 3.696805] do_one_initcall+0x5d/0x2e4 [ 3.696844] ? set_debug_rodata+0x11/0x11 [ 3.696880] ? rcu_read_lock_sched_held+0x6b/0x80 [ 3.696924] kernel_init_freeable+0x1f0/0x27c [ 3.696961] ? rest_init+0x260/0x260 [ 3.696997] kernel_init+0xa/0x110 [ 3.697028] ret_from_fork+0x3a/0x50 Fixes: fa212a97f3a36 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Allow DMA domain attaching to rmrr locked deviceLu Baolu
We don't allow a device to be assigned to user level when it is locked by any RMRR's. Hence, intel_iommu_attach_device() will return error if a domain of type IOMMU_DOMAIN_UNMANAGED is about to attach to a device locked by rmrr. But this doesn't apply to a domain of type other than IOMMU_DOMAIN_UNMANAGED. This adds a check to fix this. Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-and-tested-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Don't enable iommu's which have been ignoredLu Baolu
The iommu driver will ignore some iommu units if there's no device under its scope or those devices have been explicitly set to bypass the DMA translation. Don't enable those iommu units, otherwise the devices under its scope won't work. Fixes: d8190dc638866 ("iommu/vt-d: Enable DMA remapping after rmrr mapped") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Set domain type for a private domainLu Baolu
Otherwise, domain_get_iommu() will be broken. Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Don't return error when device gets right domainLu Baolu
If a device gets a right domain in add_device ops, it shouldn't return error. Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Differentiate relaxable and non relaxable RMRRsEric Auger
Now we have a new IOMMU_RESV_DIRECT_RELAXABLE reserved memory region type, let's report USB and GFX RMRRs as relaxable ones. We introduce a new device_rmrr_is_relaxable() helper to check whether the rmrr belongs to the relaxable category. This allows to have a finer reporting at IOMMU API level of reserved memory regions. This will be exploitable by VFIO to define the usable IOVA range and detect potential conflicts between the guest physical address space and host reserved regions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Handle PCI bridge RMRR device scopes in intel_iommu_get_resv_regionsEric Auger
In the case the RMRR device scope is a PCI-PCI bridge, let's check the device belongs to the PCI sub-hierarchy. Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Handle RMRR with PCI bridge device scopesEric Auger
When reading the vtd specification and especially the Reserved Memory Region Reporting Structure chapter, it is not obvious a device scope element cannot be a PCI-PCI bridge, in which case all downstream ports are likely to access the reserved memory region. Let's handle this case in device_has_rmrr. Fixes: ea2447f700ca ("intel-iommu: Prevent devices with RMRRs from being placed into SI Domain") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Introduce is_downstream_to_pci_bridge helperEric Auger
Several call sites are about to check whether a device belongs to the PCI sub-hierarchy of a candidate PCI-PCI bridge. Introduce an helper to perform that check. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Duplicate iommu_resv_region objects per device listEric Auger
intel_iommu_get_resv_regions() aims to return the list of reserved regions accessible by a given @device. However several devices can access the same reserved memory region and when building the list it is not safe to use a single iommu_resv_region object, whose container is the RMRR. This iommu_resv_region must be duplicated per device reserved region list. Let's remove the struct iommu_resv_region from the RMRR unit and allocate the iommu_resv_region directly in intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead of the rcu-lock to allow sleeping. Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03iommu/vt-d: Fix a variable set but not usedQian Cai
The commit "iommu/vt-d: Delegate the dma domain to upper layer" left an unused variable, drivers/iommu/intel-iommu.c: In function 'disable_dmar_iommu': drivers/iommu/intel-iommu.c:1652:23: warning: variable 'domain' set but not used [-Wunused-but-set-variable] Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-01drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not usedQian Cai
Commit cf04eee8bf0e ("iommu/vt-d: Include ACPI devices in iommu=pt") added for_each_active_iommu() in iommu_prepare_static_identity_mapping() but never used the each element, i.e, "drhd->iommu". drivers/iommu/intel-iommu.c: In function 'iommu_prepare_static_identity_mapping': drivers/iommu/intel-iommu.c:3037:22: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct intel_iommu *iommu; Fixed the warning by appending a compiler attribute __maybe_unused for it. Link: http://lkml.kernel.org/r/20190523013314.2732-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-28iommu/vt-d: Remove static identity map codeLu Baolu
The code to prepare the static identity map for various reserved memory ranges in intel_iommu_init() is duplicated with the default domain mechanism now. Remove it to avoid duplication. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Remove duplicated code for device hotplugLu Baolu
The iommu generic code has handled the device hotplug cases. Remove the duplicated code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Remove startup parameter from device_def_domain_type()Lu Baolu
It isn't used anywhere. Remove it to make code concise. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Cleanup get_valid_domain_for_dev()Lu Baolu
Previously, get_valid_domain_for_dev() is used to retrieve the DMA domain which has been attached to the device or allocate one if no domain has been attached yet. As we have delegated the DMA domain management to upper layer, this function is used purely to allocate a private DMA domain if the default domain doesn't work for ths device. Cleanup the code for readability. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Implement is_attach_deferred iommu ops entryLu Baolu
As a domain is now attached to a device earlier, we should implement the is_attach_deferred call-back and use it to defer the domain attach from iommu driver init to device driver init when iommu is pre-enabled in kdump kernel. Suggested-by: Tom Murphy <tmurphy@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Probe DMA-capable ACPI name space devicesLu Baolu
Some platforms may support ACPI name-space enumerated devices that are capable of generating DMA requests. Platforms which support DMA remapping explicitly declares any such DMA-capable ACPI name-space devices in the platform through ACPI Name-space Device Declaration (ANDD) structure and enumerate them through the Device Scope of the appropriate remapping hardware unit. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Handle 32bit device with identity default domainLu Baolu
The iommu driver doesn't know whether the bit width of a PCI device is sufficient for access to the whole system memory. Hence, the driver checks this when the driver calls into the dma APIs. If a device is using an identity domain, but the bit width is less than the system requirement, we need to use a dma domain instead. This also applies after we delegated the domain life cycle management to the upper layer. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Identify default domains replaced with privateLu Baolu
When we put a device into an iommu group, the group's default domain will be attached to the device. There are some corner cases where the type (identity or dma) of the default domain doesn't work for the device and the request of a new default domain results in failure (e.x. multiple devices have already existed in the group). In order to be compatible with the past, we used a private domain. Mark the private domains and disallow some iommu apis (map/unmap/iova_to_phys) on them. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Delegate the dma domain to upper layerLu Baolu
This allows the iommu generic layer to allocate a dma domain and attach it to a device through the iommu api's. With all types of domains being delegated to upper layer, we can remove an internal flag which was used to distinguish domains mananged internally or externally. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Delegate the identity domain to upper layerLu Baolu
This allows the iommu generic layer to allocate an identity domain and attach it to a device. Hence, the identity domain is delegated to upper layer. As a side effect, iommu_identity_mapping can't be used to check the existence of identity domains any more. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Add device_def_domain_type() helperLu Baolu
This helper returns the default domain type that the device requires. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Enable DMA remapping after rmrr mappedLu Baolu
The rmrr devices require identity map of the rmrr regions before enabling DMA remapping. Otherwise, there will be a window during which DMA from/to the rmrr regions will be blocked. In order to alleviate this, we move enabling DMA remapping after all rmrr regions get mapped. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regionsLu Baolu
To support mapping ISA region via iommu_group_create_direct_mappings, make sure its exposed by iommu_get_resv_regions. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu/vt-d: Implement apply_resv_region iommu ops entryJames Sewart
Used by iommu.c before creating identity mappings for reserved ranges to ensure dma-ops won't ever remap these ranges. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lockDave Jiang
Lockdep debug reported lock inversion related with the iommu code caused by dmar_insert_one_dev_info() grabbing the iommu->lock and the device_domain_lock out of order versus the code path in iommu_flush_dev_iotlb(). Expanding the scope of the iommu->lock and reversing the order of lock acquisition fixes the issue. [ 76.238180] dsa_bus wq0.0: dsa wq wq0.0 disabled [ 76.248706] [ 76.250486] ======================================================== [ 76.257113] WARNING: possible irq lock inversion dependency detected [ 76.263736] 5.1.0-rc5+ #162 Not tainted [ 76.267854] -------------------------------------------------------- [ 76.274485] systemd-journal/521 just changed the state of lock: [ 76.280685] 0000000055b330f5 (device_domain_lock){..-.}, at: iommu_flush_dev_iotlb.part.63+0x29/0x90 [ 76.290099] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 76.297093] (&(&iommu->lock)->rlock){+.+.} [ 76.297094] [ 76.297094] [ 76.297094] and interrupts could create inverse lock ordering between them. [ 76.297094] [ 76.314257] [ 76.314257] other info that might help us debug this: [ 76.321448] Possible interrupt unsafe locking scenario: [ 76.321448] [ 76.328907] CPU0 CPU1 [ 76.333777] ---- ---- [ 76.338642] lock(&(&iommu->lock)->rlock); [ 76.343165] local_irq_disable(); [ 76.349422] lock(device_domain_lock); [ 76.356116] lock(&(&iommu->lock)->rlock); [ 76.363154] <Interrupt> [ 76.366134] lock(device_domain_lock); [ 76.370548] [ 76.370548] *** DEADLOCK *** Fixes: 745f2586e78e ("iommu/vt-d: Simplify function get_domain_for_dev()") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu/vt-d: Introduce macros useful for dumping DMAR tableSai Praneeth Prakhya
A scalable mode DMAR table walk would involve looking at bits in each stage of walk, like, 1. Is PASID enabled in the context entry? 2. What's the size of PASID directory? 3. Is the PASID directory entry present? 4. Is the PASID table entry present? 5. Number of PASID table entries? Hence, add these macros that will later be used during this walk. Apart from adding new macros, move existing macros (like pasid_pde_is_present(), get_pasid_table_from_pde() and pasid_supported()) to appropriate header files so that they could be reused. Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu/vt-d: Remove unnecessary rcu_read_locksLukasz Odzioba
We use RCU's for rarely updated lists like iommus, rmrr, atsr units. I'm not sure why domain_remove_dev_info() in domain_exit() was surrounded by rcu_read_lock. Lock was present before refactoring in d160aca527, but it was related to rcu list, not domain_remove_dev_info function. dmar_remove_one_dev_info() doesn't touch any of those lists, so it doesn't require a lock. In fact it is called 6 times without it anyway. Fixes: d160aca5276d ("iommu/vt-d: Unify domain->iommu attach/detachment") Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-03iommu/vt-d: Make kernel parameter igfx_off work with vIOMMULu Baolu
The kernel parameter igfx_off is used by users to disable DMA remapping for the Intel integrated graphic device. It was designed for bare metal cases where a dedicated IOMMU is used for graphic. This doesn't apply to virtual IOMMU case where an include-all IOMMU is used. This makes the kernel parameter work with virtual IOMMU as well. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-03iommu/vt-d: Set intel_iommu_gfx_mapped correctlyLu Baolu
The intel_iommu_gfx_mapped flag is exported by the Intel IOMMU driver to indicate whether an IOMMU is used for the graphic device. In a virtualized IOMMU environment (e.g. QEMU), an include-all IOMMU is used for graphic device. This flag is found to be clear even the IOMMU is used. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com> Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-03iommu/vt-d: Cleanup: no spaces at the start of a lineLu Baolu
Replace the whitespaces at the start of a line with tabs. No functional changes. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-29iommu/vt-d: Use pci_dev_id() helperHeiner Kallweit
Use new helper pci_dev_id() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2019-04-26iommu/vt-d: Don't request page request irq under dmar_global_lockLu Baolu
Requesting page reqest irq under dmar_global_lock could cause potential lock race condition (caught by lockdep). [ 4.100055] ====================================================== [ 4.100063] WARNING: possible circular locking dependency detected [ 4.100072] 5.1.0-rc4+ #2169 Not tainted [ 4.100078] ------------------------------------------------------ [ 4.100086] swapper/0/1 is trying to acquire lock: [ 4.100094] 000000007dcbe3c3 (dmar_lock){+.+.}, at: dmar_alloc_hwirq+0x35/0x140 [ 4.100112] but task is already holding lock: [ 4.100120] 0000000060bbe946 (dmar_global_lock){++++}, at: intel_iommu_init+0x191/0x1438 [ 4.100136] which lock already depends on the new lock. [ 4.100146] the existing dependency chain (in reverse order) is: [ 4.100155] -> #2 (dmar_global_lock){++++}: [ 4.100169] down_read+0x44/0xa0 [ 4.100178] intel_irq_remapping_alloc+0xb2/0x7b0 [ 4.100186] mp_irqdomain_alloc+0x9e/0x2e0 [ 4.100195] __irq_domain_alloc_irqs+0x131/0x330 [ 4.100203] alloc_isa_irq_from_domain.isra.4+0x9a/0xd0 [ 4.100212] mp_map_pin_to_irq+0x244/0x310 [ 4.100221] setup_IO_APIC+0x757/0x7ed [ 4.100229] x86_late_time_init+0x17/0x1c [ 4.100238] start_kernel+0x425/0x4e3 [ 4.100247] secondary_startup_64+0xa4/0xb0 [ 4.100254] -> #1 (irq_domain_mutex){+.+.}: [ 4.100265] __mutex_lock+0x7f/0x9d0 [ 4.100273] __irq_domain_add+0x195/0x2b0 [ 4.100280] irq_domain_create_hierarchy+0x3d/0x40 [ 4.100289] msi_create_irq_domain+0x32/0x110 [ 4.100297] dmar_alloc_hwirq+0x111/0x140 [ 4.100305] dmar_set_interrupt.part.14+0x1a/0x70 [ 4.100314] enable_drhd_fault_handling+0x2c/0x6c [ 4.100323] apic_bsp_setup+0x75/0x7a [ 4.100330] x86_late_time_init+0x17/0x1c [ 4.100338] start_kernel+0x425/0x4e3 [ 4.100346] secondary_startup_64+0xa4/0xb0 [ 4.100352] -> #0 (dmar_lock){+.+.}: [ 4.100364] lock_acquire+0xb4/0x1c0 [ 4.100372] __mutex_lock+0x7f/0x9d0 [ 4.100379] dmar_alloc_hwirq+0x35/0x140 [ 4.100389] intel_svm_enable_prq+0x61/0x180 [ 4.100397] intel_iommu_init+0x1128/0x1438 [ 4.100406] pci_iommu_init+0x16/0x3f [ 4.100414] do_one_initcall+0x5d/0x2be [ 4.100422] kernel_init_freeable+0x1f0/0x27c [ 4.100431] kernel_init+0xa/0x110 [ 4.100438] ret_from_fork+0x3a/0x50 [ 4.100444] other info that might help us debug this: [ 4.100454] Chain exists of: dmar_lock --> irq_domain_mutex --> dmar_global_lock [ 4.100469] Possible unsafe locking scenario: [ 4.100476] CPU0 CPU1 [ 4.100483] ---- ---- [ 4.100488] lock(dmar_global_lock); [ 4.100495] lock(irq_domain_mutex); [ 4.100503] lock(dmar_global_lock); [ 4.100512] lock(dmar_lock); [ 4.100518] *** DEADLOCK *** Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: a222a7f0bb6c9 ("iommu/vt-d: Implement page request handling") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 15:12:08 +0000