| Age | Commit message (Collapse) | Author |
|---|
|
Running a lockedp-enabled kernel on a vim3l board (Amlogic SM1)
leads to the following splat:
[ 13.557138] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 13.587485] ip/456 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 13.625922] ffff000059908cf0 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq+0xf8/0x8d8
[ 13.632273] which would create a new lock dependency:
[ 13.637272] (&irq_desc_lock_class){-.-.}-{2:2} -> (&ctl->lock){+.+.}-{2:2}
[ 13.644209]
[ 13.644209] but this new dependency connects a HARDIRQ-irq-safe lock:
[ 13.654122] (&irq_desc_lock_class){-.-.}-{2:2}
[ 13.654125]
[ 13.654125] ... which became HARDIRQ-irq-safe at:
[ 13.664759] lock_acquire+0xec/0x368
[ 13.666926] _raw_spin_lock+0x60/0x88
[ 13.669979] handle_fasteoi_irq+0x30/0x178
[ 13.674082] generic_handle_irq+0x38/0x50
[ 13.678098] __handle_domain_irq+0x6c/0xc8
[ 13.682209] gic_handle_irq+0x5c/0xb0
[ 13.685872] el1_irq+0xd0/0x180
[ 13.689010] arch_cpu_idle+0x40/0x220
[ 13.692732] default_idle_call+0x54/0x60
[ 13.696677] do_idle+0x23c/0x2e8
[ 13.699903] cpu_startup_entry+0x30/0x50
[ 13.703852] rest_init+0x1e0/0x2b4
[ 13.707301] arch_call_rest_init+0x18/0x24
[ 13.711449] start_kernel+0x4ec/0x51c
[ 13.715167]
[ 13.715167] to a HARDIRQ-irq-unsafe lock:
[ 13.722426] (&ctl->lock){+.+.}-{2:2}
[ 13.722430]
[ 13.722430] ... which became HARDIRQ-irq-unsafe at:
[ 13.732319] ...
[ 13.732324] lock_acquire+0xec/0x368
[ 13.735985] _raw_spin_lock+0x60/0x88
[ 13.739452] meson_gpio_irq_domain_alloc+0xcc/0x290
[ 13.744392] irq_domain_alloc_irqs_hierarchy+0x24/0x60
[ 13.749586] __irq_domain_alloc_irqs+0x160/0x2f0
[ 13.754254] irq_create_fwspec_mapping+0x118/0x320
[ 13.759073] irq_create_of_mapping+0x78/0xa0
[ 13.763360] of_irq_get+0x6c/0x80
[ 13.766701] of_mdiobus_register_phy+0x10c/0x238 [of_mdio]
[ 13.772227] of_mdiobus_register+0x158/0x380 [of_mdio]
[ 13.777388] mdio_mux_init+0x180/0x2e8 [mdio_mux]
[ 13.782128] g12a_mdio_mux_probe+0x290/0x398 [mdio_mux_meson_g12a]
[ 13.788349] platform_drv_probe+0x5c/0xb0
[ 13.792379] really_probe+0xe4/0x448
[ 13.795979] driver_probe_device+0xe8/0x140
[ 13.800189] __device_attach_driver+0x94/0x120
[ 13.804639] bus_for_each_drv+0x84/0xd8
[ 13.808474] __device_attach+0xe4/0x168
[ 13.812361] device_initial_probe+0x1c/0x28
[ 13.816592] bus_probe_device+0xa4/0xb0
[ 13.820430] deferred_probe_work_func+0xa8/0x100
[ 13.825064] process_one_work+0x264/0x688
[ 13.829088] worker_thread+0x4c/0x458
[ 13.832768] kthread+0x154/0x158
[ 13.836018] ret_from_fork+0x10/0x18
[ 13.839612]
[ 13.839612] other info that might help us debug this:
[ 13.839612]
[ 13.850354] Possible interrupt unsafe locking scenario:
[ 13.850354]
[ 13.855720] CPU0 CPU1
[ 13.858774] ---- ----
[ 13.863242] lock(&ctl->lock);
[ 13.866330] local_irq_disable();
[ 13.872233] lock(&irq_desc_lock_class);
[ 13.878705] lock(&ctl->lock);
[ 13.884297] <Interrupt>
[ 13.886857] lock(&irq_desc_lock_class);
[ 13.891014]
[ 13.891014] *** DEADLOCK ***
The issue can occur when CPU1 is doing something like irq_set_type()
and CPU0 performing an interrupt allocation, for example. Taking
an interrupt (like the one being reconfigured) would lead to a deadlock.
A solution to this is:
- Reorder the locking so that meson_gpio_irq_update_bits takes the lock
itself at all times, instead of relying on the caller to lock or not,
hence making the RMW sequence atomic,
- Rework the critical section in meson_gpio_irq_request_channel to only
cover the allocation itself, and let the gpio_irq_sel_pin callback
deal with its own locking if required,
- Take the private spin-lock with interrupts disabled at all times
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The meson a1 Socs have some changes compared with previous
chips. For A113L, it contains 62 pins and can be spied on:
- 62:128 undefined
- 61:50 12 pins on bank A
- 49:37 13 pins on bank F
- 36:20 17 pins on bank X
- 19:13 7 pins on bank B
- 12:0 13 pins on bank P
There are five relative registers for gpio interrupt controller,
details are as below:
- PADCTRL_GPIO_IRQ_CTRL0
bit[31]: enable/disable the whole irq lines
bit[16-23]: both edge trigger
bit[8-15]: single edge trigger
bit[0-7]: pol trigger
- PADCTRL_GPIO_IRQ_CTRL[X]
bit[0-6]: 7 bits to choose gpio source for irq line 2*[X] - 2
bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1
where X =1,2,3,4
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-4-qianggui.song@amlogic.com
|
|
Since Meson-A1 SoCs register layout of gpio interrupt controller has
difference with previous chips, registers to decide irq line and offset
of trigger method are all changed, the current driver should be modified.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-3-qianggui.song@amlogic.com
|
|
The meson sm1 SoCs uses the same type of GPIO interrupt controller IP
block as the other meson SoCs, A total of 100 pins can be spied on:
- 223:100 undefined (no interrupt)
- 99:97 3 pins on bank GPIOE
- 96:77 20 pins on bank GPIOX
- 76:61 16 pins on bank GPIOA
- 60:53 8 pins on bank GPIOC
- 52:37 16 pins on bank BOOT
- 36:28 9 pins on bank GPIOH
- 27:12 16 pins on bank GPIOZ
- 11:0 12 pins in the AO domain
Mapping is the same as the g12a family but the sm1 controller
allows to trig an irq on both edges of the input signal. This was
not possible with the previous SoCs families
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190829161635.25067-3-jbrunet@baylibre.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq departement provides the usual mixed bag:
Core:
- Further improvements to the irq timings code which aims to predict
the next interrupt for power state selection to achieve better
latency/power balance
- Add interrupt statistics to the core NMI handlers
- The usual small fixes and cleanups
Drivers:
- Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
Amazon Gravition AMR/GIC interrupt controllers.
- Rework of the Renesas INTC controller driver
- ACPI support for Socionext SoCs
- Enhancements to the CSKY interrupt controller
- The usual small fixes and cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
irq/irqdomain: Fix comment typo
genirq: Update irq stats from NMI handlers
irqchip/gic-pm: Remove PM_CLK dependency
irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
softirq: Use __this_cpu_write() in takeover_tasklets()
irqchip/mbigen: Stop printing kernel addresses
irqchip/gic: Add dependency for ARM_GIC_MAX_NR
genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
genirq/timings: Add selftest for next event computation
genirq/timings: Add selftest for irqs circular buffer
genirq/timings: Add selftest for circular array
genirq/timings: Encapsulate storing function
genirq/timings: Encapsulate timings push
genirq/timings: Optimize the period detection speed
genirq/timings: Fix timings buffer inspection
genirq/timings: Fix next event index function
irqchip/qcom: Use struct_size() in devm_kzalloc()
irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
dt-bindings: interrupt-controller: Update csky mpintc
...
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses the full gnu general public license is included in this
distribution in the file called copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081202.258730266@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:
- 223:100 undefined (no interrupt)
- 99:97 3 pins on bank GPIOE
- 96:77 20 pins on bank GPIOX
- 76:61 16 pins on bank GPIOA
- 60:53 8 pins on bank GPIOC
- 52:37 16 pins on bank BOOT
- 36:28 9 pins on bank GPIOH
- 27:12 16 pins on bank GPIOZ
- 11:0 12 pins in the AO domain
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The Meson-AXG SoC uses the same GPIO interrupt controller IP block as the other
Meson SoCs. A total of 100 pins can be spied on, which is the sum of:
- 255:100 Undefined(no interrupt)
- 99:84, 16 pins on bank GPIOY
- 83:61, 23 pins on bank GPIOX
- 60:40, 21 pins on bank GPIOA
- 39:25, 15 pins on bank BOOT
- 24:14, 11 pins on bank GPIOZ
- 13:0 , 14 pins in the AO domain
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Meson8 uses the same GPIO interrupt controller IP block as the other
Meson SoCs. A total of 134 pins can be spied on, which is the sum of:
- 22 pins on bank GPIOX
- 17 pins on bank GPIOY
- 30 pins on bank GPIODV
- 10 pins on bank GPIOH
- 15 pins on bank GPIOZ
- 7 pins on bank CARD
- 19 pins on bank BOOT
- 14 pins in the AO domain
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add support for the interrupt gpio controller found on Amlogic's meson
SoC family.
This controller is a separate controller from the gpio controller. It is
able to spy on the SoC pad. It is essentially a 256 to 8 router with a
filtering block to select level or edge and polarity. The number of actual
mappable inputs depends on the SoC.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
