| Age | Commit message (Collapse) | Author |
|---|
|
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
drivers/media/common/siano/smsdvb-main.c:47:5: warning: symbol 'sms_to_guard_interval_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:54:5: warning: symbol 'sms_to_code_rate_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:63:5: warning: symbol 'sms_to_hierarchy_table' was not declared. Should it be static?
drivers/media/common/siano/smsdvb-main.c:70:5: warning: symbol 'sms_to_modulation_table' was not declared. Should it be static?
drivers/media/common/siano/smscoreapi.c:925:35: warning: cast to restricted __le32
drivers/media/common/siano/smscoreapi.c:926:28: warning: cast to restricted __le32
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
These aren't necessary after switch and while statements.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
At this bugzilla and similar ones:
https://bugzilla.kernel.org/show_bug.cgi?id=60645
Those debug messages were seen as errors, but they're just debug
data, and are OK to appear on sms1100 and sms2270. Re-tag them
to appear only if debug is enabled.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Tested-by: André Roth <neolynx@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
As reported by Jim Davis <jim.epost@gmail.com>,
building with:
CONFIG_USB=m
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_DEBUGFS=y
causes a build error:
drivers/built-in.o: In function `smsdvb_debugfs_register':
/home/jim/linux/drivers/media/common/siano/smsdvb-debugfs.c:537:
undefined reference to `usb_debug_root'
make: *** [vmlinux] Error 1
That happens because the siano-mdtv is builtin, while USB is a
module. As it makes not much sense to have sms-usb compiled as 'm'
and sms-sdio compiled as 'y' (or vice-versa), only allow enabling
debugfs if both are either 'y' or 'm'.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
GIT_AUTHOR_DATE=1376465691
I took a quick look at the code and wonder if the problem is caused by
an initial zero statistics message? This is all just a wild guess, but
if it is correct, then the attached untested patch might fix it...
Bjørn
>From d78a0599d5b5d4da384eae08bf7da316389dfbe5 Mon Sep 17 00:00:00 2001
ts_packets and ets_packets counters can be 0. Don't fall over
if they are. Fixes:
[ 846.851711] divide error: 0000 [#1] SMP
[ 846.851806] Modules linked in: smsdvb dvb_core ir_lirc_codec lirc_dev ir_sanyo_decoder ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge smsusb smsmdtv rc_core pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) parport_pc ppdev lp parport cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc ext4 jbd2 fuse tp_smapi(O) thinkpad_ec(O) loop firewire_sbp2 dm_crypt snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm thinkpad_acpi nvram snd_page_alloc hid_generic snd_seq_midi snd_seq_midi_event arc4 usbhid snd_rawmidi uvcvideo hid iwldvm coretemp kvm_intel mac8021
1 cdc_wdm
[ 846.853477] cdc_acm snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media kvm radeon r852 ttm joydev cdc_ether usbnet pcmcia mii sm_common nand btusb drm_kms_helper tpm_tis acpi_cpufreq bluetooth iwlwifi nand_ecc drm nand_ids i2c_i801 mtd snd_seq_device iTCO_wdt iTCO_vendor_support r592 memstick lpc_ich mperf tpm yenta_socket pcmcia_rsrc pcmcia_core cfg80211 snd_timer snd pcspkr i2c_algo_bit crc16 i2c_core tpm_bios processor mfd_core wmi psmouse mei_me rfkill mei serio_raw soundcore evdev battery button video ac microcode ext3 mbcache jbd md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t thermal thermal_sys ahci libahci ehci_pci uhci_hcd ehci_hcd libata scsi_mod usbcore e1000
e usb_common
[ 846.855310] ptp pps_core
[ 846.855356] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10-2-amd64 #1 Debian 3.10.5-1
[ 846.855490] Hardware name: LENOVO 4061WFA/4061WFA, BIOS 6FET92WW (3.22 ) 12/14/2011
[ 846.855609] task: ffffffff81613400 ti: ffffffff81600000 task.ti: ffffffff81600000
[ 846.855636] RIP: 0010:[<ffffffffa092be0c>] [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[ 846.863906] RSP: 0018:ffff88013bc03cf0 EFLAGS: 00010046
[ 846.863906] RAX: 0000000000000000 RBX: ffff880133bf6000 RCX: 0000000000000000
[ 846.863906] RDX: 0000000000000000 RSI: ffff88005d3b58c0 RDI: ffff880133bf6000
[ 846.863906] RBP: ffff88005d1da000 R08: 0000000000000058 R09: 0000000000000015
[ 846.863906] R10: 0000000000001a0d R11: 000000000000021a R12: ffff88005d3b58c0
[ 846.863906] R13: ffff88005d1da008 R14: 00000000ffffff8d R15: ffff880036cf5060
[ 846.863906] FS: 0000000000000000(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000
[ 846.863906] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 846.863906] CR2: 00007f3a4b69ae50 CR3: 0000000036dac000 CR4: 00000000000407f0
[ 846.863906] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 846.863906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 846.863906] Stack:
[ 846.863906] ffff88007a102000 ffff88005d1da000 ffff88005d3b58c0 0000000000085824
[ 846.863906] ffffffffa08c5aa3 ffff88005d1da000 ffff8800a6907390 ffff8800a69073b0
[ 846.863906] ffff8800a6907000 ffffffffa08b642c 000000000000021a ffff8800a69073b0
[ 846.863906] Call Trace:
[ 846.863906] <IRQ>
[ 846.863906]
[ 846.863906] [<ffffffffa08c5aa3>] ? smscore_onresponse+0x1d5/0x353 [smsmdtv]
[ 846.863906] [<ffffffffa08b642c>] ? smsusb_onresponse+0x146/0x192 [smsusb]
[ 846.863906] [<ffffffffa004cb1a>] ? usb_hcd_giveback_urb+0x6c/0xac [usbcore]
[ 846.863906] [<ffffffffa0217be1>] ? ehci_urb_done+0x62/0x72 [ehci_hcd]
[ 846.863906] [<ffffffffa0217c82>] ? qh_completions+0x91/0x364 [ehci_hcd]
[ 846.863906] [<ffffffffa0219bba>] ? ehci_work+0x8a/0x68e [ehci_hcd]
[ 846.863906] [<ffffffff8107336c>] ? timekeeping_get_ns.constprop.10+0xd/0x31
[ 846.863906] [<ffffffff81064d41>] ? update_cfs_rq_blocked_load+0xde/0xec
[ 846.863906] [<ffffffff81058ec2>] ? run_posix_cpu_timers+0x25/0x575
[ 846.863906] [<ffffffffa021aa46>] ? ehci_irq+0x211/0x23d [ehci_hcd]
[ 846.863906] [<ffffffffa004c0c1>] ? usb_hcd_irq+0x31/0x48 [usbcore]
[ 846.863906] [<ffffffff810996fd>] ? handle_irq_event_percpu+0x49/0x1a4
[ 846.863906] [<ffffffff8109988a>] ? handle_irq_event+0x32/0x4b
[ 846.863906] [<ffffffff8109bd76>] ? handle_fasteoi_irq+0x80/0xb6
[ 846.863906] [<ffffffff8100e93e>] ? handle_irq+0x18/0x20
[ 846.863906] [<ffffffff8100e657>] ? do_IRQ+0x40/0x95
[ 846.863906] [<ffffffff813883ed>] ? common_interrupt+0x6d/0x6d
[ 846.863906] <EOI>
[ 846.863906]
[ 846.863906] [<ffffffff812a011c>] ? arch_local_irq_enable+0x4/0x8
[ 846.863906] [<ffffffff812a04f3>] ? cpuidle_enter_state+0x52/0xc1
[ 846.863906] [<ffffffff812a0636>] ? cpuidle_idle_call+0xd4/0x143
[ 846.863906] [<ffffffff8101398c>] ? arch_cpu_idle+0x5/0x17
[ 846.863906] [<ffffffff81072571>] ? cpu_startup_entry+0x10d/0x187
[ 846.863906] [<ffffffff816b3d3d>] ? start_kernel+0x3e8/0x3f3
[ 846.863906] [<ffffffff816b3777>] ? repair_env_string+0x54/0x54
[ 846.863906] [<ffffffff816b3598>] ? x86_64_start_kernel+0xf2/0xfd
[ 846.863906] Code: 25 09 00 00 c6 83 da 08 00 00 03 8b 45 54 48 01 83 b6 08 00 00 8b 45 50 48 01 83 db 08 00 00 8b 4d 18 69 c1 ff ff 00 00 03 4d 14 <48> f7 f1 89 83 a8 09 00 00 e9 68 fe ff ff 48 8b 7f 10 e8 79 92
[ 846.863906] RIP [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[ 846.863906] RSP <ffff88013bc03cf0>
Reference: http://bugs.debian.org/719623
Reported-by: Johannes Rohr <jorohr@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Replace the V4L2_IDENT_* usage with tveeprom-specific defines. This header
is deprecated, so those defines shouldn't be used anymore.
The em28xx driver is the only one that uses the tveeprom audio_processor
field, so that has been updated to use the new tveeprom AUDPROC define.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
VIDIOC_DBG_G_CHIP_IDENT has been replaced by VIDIOC_DBG_G_CHIP_INFO. Remove
g_chip_ident support from bridge drivers since it is no longer needed.
This patch takes care of all the trivial cases.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Ensure release_firmware is called if kmalloc fails.
[mchehab@redhat.com: patch unmangled and converted from -p2 to -p1]
Signed-off-by: Roberto Alcantara <roberto@eletronica.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix missing break that so that n_layers are not accidentally incorrect
Kernel version: v3.10-rc1
Signed-off-by: Jakob Normark <jakobnormark@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
If firmware load fails, report it as an error.
Signed-off-by: Roberto Alcantara <roberto@eletronica.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix randconfig error when USB is not enabled:
ERROR: "usb_control_msg" [drivers/media/common/cypress_firmware.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Hauppauge Nova-S-Plus DVB-S model 92001 does not lock on horizontal
polarisation. According with the info provided at the BZ, model
92002 does.
The difference is that, on model 92001, the tone select is done via
isl6421, while, on other devices, this is done via cx24123 code.
This patch adds a way to override the demod's set_tone at isl6421
driver. In order to avoid regressions, the override is enabled
only for cx88 Nova S plus model 92001. For all other models and
devices, the set_tone is provided by the demod driver.
Patch originally proposed at bz@9476[1] by Michel Meyers and
John Donoghue but applying the original patch would break support
for all other devices based on isl6421.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=9476
Tested-by: Adam Sampson <ats@offog.org>
Tested-by: Hans-Peter Jansen <hpj@urpla.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As reported by Dan Carpenter:
FYI, there are new smatch warnings show up in
tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master
head: da17d7bda957ae4697b6abc0793f74fb9b50b58f
commit: 4c3bdb5e2f5612ceb99ac17dbbe673b59a94d105 [media] siano: better debug send/receive messages
drivers/media/common/siano/smscoreapi.c:396 smscore_translate_msg() error: buffer overflow 'siano_msgs' 401 <= 401
While it is almost impossible for this error to happen in
practice, as it would require the siano's firmware to return
an special invalid answer to a message request, fixing it
is trivial. So, let's do it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Loading the cypress firmware is not dvb specific and should be common
functionality. Move the source to media/common and make it a standalone
module.
As a result we can remove the dependency on dvb-usb in go7007, which has
nothing to do with dvb.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This ioctl is defined as IOW, so pass the argument by value instead of by
reference. I could have chosen to add const instead, but this is 1) easier
to handle in drivers and 2) consistent with the s_std subdev operation.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This field is unused. Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As reported by Frank Schäfer <fschaefer.oss@googlemail.com>:
ERROR: "__divdi3" [drivers/media/common/siano/smsdvb.ko] undefined!
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Tested-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
drivers/media/common/siano/smsdvb-debugfs.c:51:6: warning: no previous prototype for 'smsdvb_print_dvb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:154:6: warning: no previous prototype for 'smsdvb_print_isdb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:244:6: warning: no previous prototype for 'smsdvb_print_isdb_stats_ex' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:832:5: warning: no previous prototype for 'smscore_configure_board' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:1301:5: warning: no previous prototype for 'smscore_init_device' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix all other remaining checkpatch.pl compliants on the Siano driver,
except for the 80-cols (soft) limit. Those are harder to fix, and
probably not worth to do right now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Remove the remaining CamelCase checkpatch.pl compliants.
There are still a few left, but those are due to USB and
DVB APIs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix the remaining checkpatch.pl compliants at smscoreapi.h,
except by the "line over 80 characters" on comments. Fixing those
would require more time, as the better is to convert them into the
struct descriptions used inside the kernel, as described at:
Documentation/kernel-doc-nano-HOWTO.txt
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There are several structures defined in uppercase. Convert them
to lowercase, and simplify their names, when possible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
It is almost impossible to see a compliant with checkpatch.pl
on those Siano drivers, as there are simply too much violations
on it. So, now that a big change was done, the better is to
cleanup the checkpatch compliants.
Let's first replace all CammelCase symbols found at smscoreapi.h
using camel_case namespace. That removed 144 checkpatch.pl
compliants on this file. Of course, the other files need to be
fixed accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This driver can use several firmwares. Provide such info at
module firmware metadata.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There are too many firmwares there. As we need to add
MODULE_FIMWARE() macros, the better is to define their names
on just one place and use the macros for both cards/device type
tables and MODULE_FIRMWARE().
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When the driver is tuned into chanel, and it is removed/reinserted,
the message stream data may be arriving during device probe:
[ 5680.162004] smscore_set_device_mode: set device mode to 6
[ 5680.162267] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162391] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162641] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.162891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163266] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163516] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163640] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.163891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164265] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164515] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.164519] smscore_onresponse: Firmware id 6 prots 0x40 ver 8.1
[ 5680.164766] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.166018] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
[ 5680.166438] DVB: registering new adapter (Siano Rio Digital Receiver)
Instead of complaining, just silently discard those messages, instead of
complaining.
A proper fix is to put the device on suspend/power down mode when the module
is removed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
sms_debug() and sms_info() already adds a '\n' at the printed
strings. No need to add more.
That helps to cleanup stuff like:
[ 4868.205648] smscore_onresponse: message not handled.
[ 4868.205898] smscore_onresponse: message not handled.
and:
[ 5467.959769] smscore_onresponse:
data rate 143069 bytes/secs
While here, provides the message name, when the message is not
handled by the smsmdtv core.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Put this function earlier in the code, to avoid the need of
defining a function stub.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There is an special lookup code that is called when
SMS_BOARD_UNKNOWN. The logic there is bogus and will cause
an oops, as .type is SMS_UNKNOWN_TYPE (-1).
As the code would do:
return smscore_fw_lkup[type][mode];
That would mean that it would try to go past the
smscore_fw_lkup table.
So, just remove that bogus code, simplifying the logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Instead of using a global default_mode, passed via modprobe
parameter, use the one defined inside the cards struct.
That will prevent the need of manually specify it for each
board, except, of course, if the user wants to do something
different, on boards that accept multiple types.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There are two ways to specify firmware for siano devices: a
per-device ID and a per-device type.
The per-device type logic is currently made by a 11x9 string
table, sparsely filled. It is very hard to read the table at
the source code, as there are too much "none" filling there
("none" there is a way to tell NULL).
Instead of using such problematic table, convert it into an
easy to read table, where the unused values will be defaulted
to NULL.
While here, also simplifies a little bit the logic and print
a message if an user-selected mode doesn't exist.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Implement poll() method for debugfs and be sure that the
debug_data won't be freed on ir or on read().
With this change, poll() will return POLLIN if either data was
filled or if data was read. That allows read() to return 0
to indicate EOF in the latter case.
As poll() is now provided, fix support for non-block mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This seems to be ever broken. That's the status report with
Firmware 2.1, before adding support for sms2270 is:
[22273.787218] smsdvb_onresponse: MSG_SMS_GET_STATISTICS_RES
[22273.792592] IsRfLocked = 1
[22273.792592] IsDemodLocked = 1
...
[22273.792598] TransmissionMode = -64
...
(all unshown fields are filled with zeros)
Of course, transmission mode being a negative number is wrong.
So, we need to take a deeper look on it.
With the debugfs patches applied, it is possible to see that, instead
of filling StatisticsType with 5, and FullSize with the size of the
payload (this is what happens with sms2270 and firmware 8.1),
those fields are also initialized with zero:
StatisticsType = 0 FullSize = 0
IsRfLocked = 1 IsDemodLocked = 1 IsExternalLNAOn = 0
SNR = 0 dB RSSI = 0 dBm InBandPwr = 0 dBm
CarrierOffset = 0 Bandwidth = 0 Frequency = 0 Hz
TransmissionMode = -64 ModemState = 0 GuardInterval = 0
SystemType = 0 PartialReception = 0 NumOfLayers = 0
SmsToHostTxErrors = 0
The data under "TransmissionMode" varies according with the signal,
and it is negative. It also matches the value for InBandPwr when
the tuner is on DVB-T (ok, signal doesn't lock, but the power level
should be about the same with the antena fixed, and measured at about
the same time).
So, there's a very high chance that, when StatisticsType is zero, the
signal strength is at the same position as Transmission Mode.
So, discard all other parameters, and provide only signal/rf lock and
signal strength if StatisticsType is 0, for ISDB-T.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Right now, the driver sends DVB data even before tunning.
It was noticed that this may lead into some mistakes at DVB
decode, as the PIDs from wrong channels may be associated with
another frequency, as they may already be inside the PID buffers.
So, prevent it by not feeding DVB demux with data while there's no
feed or while the device is not tuned.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
It was expected that the bandwidth would be following the defines
at smscoreapi.h. However, this doesn't work. Instead, this field
brings just the bandwidth in MHz. Convert it to Hertz.
It should be noticed that, on ISDB, using the _EX request, the
field TuneBW seems to show the value that matches the bandwidth
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The check for lock logic is broken. Due to that, no PER/BER
stats will ever be showed, and the DVBV3 events will be wrong.
Also, the per-layer PER/BER stats for ISDB-T are filled with
the wrong index.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There are a number of small issues with the stats refactoring:
- InBandPwr better represents the signal strength;
- Don't zero signal strength /cnr if no lock;
- Fix signal strength/cnr scale;
- Don't need to fill PER/BER if not locked, as the
code will disable those stats anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As each DVBv3 call may generate an stats overhead, prevent doing
it too fast. This is specially useful if a burst of get stats
DVBv3 call is sent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Those fields help to identify the version of the ISDB stats.
Useful while debuging the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
To avoid mixing two different things at the same place, move the
debugfs code into a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Outputs the result of the statistics responses via debugfs.
That can help to track bugs at the stats filling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
It seems that the first u32 after the header for some stats are used by
something not documented.
The stats struct starts after it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
While this frontend provides a nice set of statistics, the
way it is currently reported to userspace is poor. Worse than
that, instead of using quality indicators that range from 0 to 65535,
as expected by userspace, most indicators range from 0 to 100.
Improve it by using DVBv5 statistics API. The legacy indicators
are still reported using the very same old way, but they're now
using a proper range (0 to 65535 for quality indicadors; 0.1 dB
for SNR).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
It is confusing to merge both status updates with debug stuff.
Also, it is a better idea to move those status updates to
debugfs, instead of doing a large amount of printk's like that.
So, break them into a separate block of routines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Instead of handling both DVB-T and ISDB-T at the same get_frontend
function, break it intow one function per-delivery system.
That makes the code clearer as we start to add support for DVBv5
statistics, and for ISDB-T get frontend stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Currently, every time a message is sent or received, the endiannes
need to be fixed on big endian machines. This is currently done
on every call to the send API, and on every msg reception logic.
Instead of doing that, move it to the send/receive functions.
That simplifies the logic and avoids the risk of forgetting to
fix it somewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Newer firmwares seem to require an init device message. Apply
such change from Doron Cohen's patch:
http://patchwork.linuxtv.org/patch/7889/
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Backported from Doron Cohen's patch:
http://patchwork.linuxtv.org/patch/7889/
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
